Synthesis of an Alginate-Based Fe3O4-MnO2 Xerogel and Its Application for the Concurrent Elimination of Cr(VI) and Cd(II) from Aqueous Solution

Magnetic graphene oxide functionalized alginate-g-poly(2-hydroxypropylmethacrylamide) nanoplatform for near-infrared light/pH/magnetic field-sensitive drug release and chemo/phototherapy

Multifunctional nanoplatforms developed from natural polymers and graphene oxide (GO) with enhanced biological/physicochemical features have recently attracted attention in the biomedical field. Herein, a new multifunctional near-infrared (NIR) light-, pH- and magnetic field-sensitive hybrid nanoplatform (mGO@AL-g-PHPM@ICG/EP) is developed by combining iron oxide decorated graphene oxide nanosheets (mGO) and poly(2-hydroxypropylmethacrylamide) grafted alginate (AL-g-PHPM) copolymer loaded with indocyanine green (ICG) and etoposide (EP) for chemo/phototherapy. The functional groups, specific crystal structure, size, morphology, and thermal stability of the nanoplatform were fully characterized by XRD, UV, FTIR, AFM/TEM/FE-SEM, VSM, DSC/TG, and BET analyses. In this platform, the mGO and ICG, as phototherapeutic agents, demonstrate excellent thermal effects and singlet oxygen production under NIR-light (808 nm) irradiation. The XRD and DSC analysis confirmed the amorphous state of the ICG/EP in the nanoparticles. In vitro photothermal tests proved that the mGO@AL-g-PHPM@ICG/EP nanoparticles had outstanding light stability and photothermal conversion ability. The in vitro release profiles presented NIR light-, pH- and magnetic field-controlled EP/ICG release behaviors. In vitro experiments demonstrated the excellent antitumor activity of the mGO@AL-g-PHPM@ICG/EP against H1299 tumor cells under NIR laser. Benefiting from its low-cost, facile preparation, and good dual-modal therapy, the mGO@AL-g-PHPM@ICG/EP nanoplatform holds great promise in multi-stimuli-sensitive drug delivery and chemo/phototherapy.

Design and development of pH-responsive alginate-based nanogel carriers for etoposide delivery

Recently, pH-responsive nanogels are playing progressively important roles in cancer treatment. The present study focuses on designing and developing pH-responsive alginate-based nanogels to achieve a controlled release of etoposide (Et) while enhancing its hydrophilicity. Alginate (ALG) is grafted with 2-hydroxypropyl methacrylamide (HPMA) through a microwave-supported method, and the chemical structure of the graft copolymer (ALG-g-PHPMA) was verified by 1H/13C NMR and FTIR techniques. The ALG-g-PHPMA and anticancer drug-loaded ALG-g-PHPMA@Et nanogels were obtained using an emulsion method, and their structures were characterized through FTIR, TG/DSC, AFM/TEM, BET, and DLS analyses. The ALG-g-PHPMA nanogels demonstrated a good drug encapsulation efficiency (79.60 %), displaying a pH-dependent release profile and an in vitro accelerated release of Et compared to the ALG nanogels. Thermal and BET analyses revealed enhanced stability, surface area, and porosity volume of the alginate nanogels. The grafting of PHPMA chains onto alginate altered the surface topology of the ALG nanogels, resulting in lower surface roughness. Furthermore, cytotoxicity tests showed the high biocompatibility of the ALG-g-PHPMA copolymer and its nanogels. The ALG-g-PHPMA@Et nanogels exhibited a higher anticancer effect on lung cancer (H1299) cells than free etoposide. These results suggest that the ALG-g-PHPMA nanogels can be applied as a pH-dependent nanoplatform for delivering anticancer drugs.

The Development of Fe3O4-Monolithic Resorcinol-Formaldehyde Carbon Xerogels Using Ultrasonic-Assisted Synthesis for Arsenic Removal of Drinking Water

Inorganic arsenic in drinking water from groundwater sources is one of the potential causes of arsenic-contaminated environments, and it is highly toxic to human health even at low concentrations. The purpose of this study was to develop a magnetic adsorbent capable of removing arsenic from water. Fe3O4-monolithic resorcinol-formaldehyde carbon xerogels are a type of porous material that forms when resorcinol and formaldehyde (RF) react to form a polymer network, which is then cross-linked with magnetite. Sonication-assisted direct and indirect methods were investigated for loading Fe3O4 and achieving optimal mixing and dispersion of Fe3O4 in the RF solution. Variations of the molar ratios of the catalyst (R/C = 50, 100, 150, and 200), water (R/W = 0.04 and 0.05), and Fe3O4 (M/R = 0.01, 0.03, 0.05, 0.1, 0.15, and 0.2), and thermal treatment were applied to evaluate their textural properties and adsorption capacities. Magnetic carbon xerogel monoliths (MXRF600) using indirect sonication were pyrolyzed at 600 °C for 6 h with a nitrogen gas flow in the tube furnace. Nanoporous carbon xerogels with a high surface area (292 m2/g) and magnetic properties were obtained. The maximum monolayer adsorption capacity of As(III) and As(V) was 694.3 µg/g and 1720.3 µg/g, respectively. The incorporation of magnetite in the xerogel structure was physical, without participation in the polycondensation reaction, as confirmed by XRD, FTIR, and SEM analysis. Therefore, Fe3O4-monolithic resorcinol-formaldehyde carbon xerogels were developed as a potential adsorbent for the effective removal of arsenic with low and high ranges of As(III) and As(V) concentrations from groundwater.

Valorization of Ginger Waste-Derived Biochar for Simultaneous Multiclass Antibiotics Remediation in Aqueous Medium

The presence of antibiotics in the aqueous environment has been a serious concern primarily due to the development of antimicrobial resistance (AMR) in diverse microbial populations. To overcome the rising AMR concerns, antibiotic decontamination of the environmental matrices may play a vital role. The present study investigates the use of zinc-activated ginger-waste derived biochar for the removal of six antibiotics belonging to three different classes, viz., β-lactams, fluoroquinolones, and tetracyclines from the water matrix. The adsorption capacities of activated ginger biochar (AGB) for the concurrent removal of the tested antibiotics were investigated at different contact times, temperatures, pH values, and initial concentrations of the adsorbate and adsorbent doses. AGB demonstrated high adsorption capacities of 5.00, 17.42, 9.66, 9.24, 7.15, and 5.40 mg/g for amoxicillin, oxacillin, ciprofloxacin, enrofloxacin, chlortetracycline, and doxycycline, respectively. Further, among the employed isotherm models, the Langmuir model fitted well for all the antibiotics except oxacillin. The kinetic data of the adsorption experiments followed the pseudo-second order kinetics suggesting chemisorption as the preferred adsorption mechanism. Adsorption studies at different temperatures were conducted to obtain the thermodynamic characteristics suggesting a spontaneous exothermic adsorption phenomenon. AGB being a waste-derived cost-effective material shows promising antibiotic decontamination from the water environment.

Synthesis of Biomass-Derived Activated Carbons and Their Immobilization on Alginate Gels for the Simultaneous Removal of Cr(VI), Cd(II), Pb(II), As(III), and Hg(II) from Water

Low-cost alginate gels of activated carbons were prepared, which were derived from the peels of banana and sweet lime. The synthesized carbon was activated and immobilized on alginate, producing its gel. These gels were categorized according to their methods of drying, in which air drying, freeze drying, and supercritical drying led to the formation of xerogels, cryogels, and aerogels, respectively. The gels were used for adsorption of heavy metals from their aqueous solution. The heavy metals that were targeted for removal were Pb(II), Cd(II), Cr(VI), As(III), and Hg(II). Among all the adsorbents, the alginate cryogel of sweet lime-derived activated carbon (SLACC) showed the highest removal percentage of heavy metals, and thus, it was used for batch study. The adsorption of heavy metals by SLACC was checked at different times, pH values, adsorbent doses, temperatures, and adsorbate concentrations. The study revealed that the pseudo-second-order model best described the kinetic study, while the adsorption followed the Freundlich isotherm. SLACC showed maximum adsorption capacities (q _cal) of 3.71, 4.22, 20.04, 7.31, and 4.37 mg/g for Cr, Cd, Pb, As, and Hg, respectively, when 20 mg of SLACC was used for the removal of 4 ppm concentration of the targeted heavy metals from their 20 mL solution. Based on the thermodynamic study, it was found that the adsorption was spontaneous and exothermic. Furthermore, the adsorbent was also used on real water samples and showed up to 90% removal efficiency for these targeted heavy metals. SLACC was regenerated with 0.1 M ethylenediaminetetraacetic acid (EDTA) solution and reused for five cycles, in which the percentage removal of heavy metals was more than 50% till the fourth cycle. Furthermore, the leaching study showed that no toxic elements had leached from SLACC into water, making it a safe adsorbent.

Development of novel Core-shell impregnated polyuronate composite beads for an eco-efficient removal of arsenic

Arsenic (As) can geogenically and anthropogenically contaminate the potable water resources and undoubtedly reduces its availability for human consumption. To circumvent this predicament, present study focuses on the development of a novel biosorbent by impregnating calcium cross-linked polyuronate (alginate) beads (CABs) with bilayer-oleic coated magnetite nanoparticles (CAB@BOFe) for As(V) removal. Initially, the system parameters (i.e., adsorbents dose (0.1- 3.0 g L-1), pH (4.0-13), reaction times (0-180 min) and sorbate concentrations (10-150 µg L-1)) were optimized to establish adsorbent at the lab-scale. CAB@BOFe had higher monolayer (ad)sorption capacity (∼62.5 µg g-1, 120 min) than CABs (∼17.9 µg g-1, 180 min). Electrostatic/Ion-dipole interactions and surface-complexation mechanisms mediated As(V) sorption onto CAB@BOFe mainly obeyed Langmuir isotherm (R2 ∼ 0.9) and well described by intraparticle diffusion process. Furthermore, it demonstrated an excellent arsenate removal performance from the single/multiple anionic contaminants simulated water samples which supported its prospective field applicability.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.