High-Performance MnO2 Nanowire/MoS2 Nanosheet Composite for a Symmetrical Solid-State Supercapacitor

Transition metal phosphide/ molybdenum disulfide heterostructures towards advanced electrochemical energy storage: recent progress and challenges

Transition metal phosphide @ molybdenum disulfide (TMP@MoS2) heterostructures, consisting of TMP as the core main catalytic body and MoS2 as the outer shell, can solve the three major problems in the field of renewable energy storage and catalysis, such as lack of resources, cost factors, and low cycling stability. The heterostructures synergistically combine the excellent conductivity and electrochemical performance of transition metal phosphides with the structural robustness and catalytic activity of molybdenum disulfide, which holds great promise for clean energy. This review addresses the advantages of TMP@MoS2 materials and their synthesis methods-e.g., hydrothermal routes and chemical vapor deposition regarding scalability and cost. Their electrochemical energy storage and catalytic functions e.g., hydrogen and oxygen evolution reactions (HER and OER) are also extensively explored. Their potential within battery and supercapacitor technologies is also assessed against leading performance metrics. Challenges toward industry-scale scalability, longevity, and environmental sustainability are also addressed, as are optimization and large-scale deployment strategies.

Ga-doping in Li0.33La0.56TiO3: a promising approach to boost ionic conductivity in solid electrolytes for high-performance all-solid-state lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLBs) are the next advancement in battery technology which is expected to power the next generation of electronics, particularly electric vehicles due to their high energy density and superior safety. ASSLBs require solid electrolytes with high ionic conductivity to serve as a Li-ion battery, driving extensive research efforts to enhance the ionic conductivity of the existing solid electrolytes. Keeping this in view, the B-site of Li0.33La0.56TiO3 (LLTO) solid electrolyte has been partially substituted with Ga and novel Ga-doped LLTO (Li0.33+x La0.56Ti1-x Ga x O3) solid-electrolytes are fabricated using the solid-state reaction method, followed by sintering at 1100 °C for 2 h. The effects of Ga substitution on the structural changes, chemical states, ionic conductivity, and electrochemical stability of LLTO are systematically analyzed. The XRD analysis of the LLTO samples confirms the formation of a tetragonal perovskite structure and increasing bottleneck size up to 3% Ga-doped samples. XPS results have further confirmed the successful substitution of Ti4+ by Ga3+. The Ga3+ substitution has successfully enhanced the conductivity of LLTO solid electrolytes and the highest conductivity of 4.15 × 10-3 S cm-1 is found in Li0.36La0.56Ti0.97Ga0.03O3 (x = 0.03), which is an order of magnitude higher than that of pristine LLTO. This increase in ionic conductivity is a synergistic effect of B-O bond stretching resulting from the size difference between Ga3+ and Ti4+ and the increase in grain size. Moreover, the synthesized solid electrolytes are stable within the range of 2.28 to 3.78 V against Li/Li+, making them potential candidates for all-solid-state lithium-ion batteries.

Impact of Nitrogen-Enriched 1T/2H-MoS2/CdS as an Electrode Material for Hybrid Supercapacitor

Transition metal chalcogenides (TMX) have attracted energy researchers due to their role as high-performance electrode materials for energy storage devices. A facile one-pot hydrothermal technique was adopted to synthesize a molybdenum disulfide/cadmium sulfide (MoS2/CdS) (MCS) composite. The as-prepared samples were subjected to characterization techniques such as XRD, FT-IR, SEM, TEM, and XPS to assess their structure, morphology, and oxidation states. The MoS2/CdS (MCS) composites were prepared in three different ratios of molybdenum and cadmium metals. Among them, the MCS 1:2 (Mo:Cd) ratio showed better electrochemical performance with a high specific capacitance of 1336 F g-1 (high specific capacity of 185.83 mAh g-1) at a specific current of 1 A g-1 for half-cell studies. Later, a hybrid supercapacitor (HSC) device was fabricated with N-doped graphene (NG) as an anode and MCS (1:2) as a cathode, delivering a high specific energy of 34 Wh kg-1 and a specific power of 7500 W kg-1. The high nitrogen content in the MoS2 structure in MCS composites alters the device's performance, where CdS supports the composite structure through its conductivity and encourages the easy accessibility of ions. The device withstands up to 10 000 cycles with a higher Coulombic efficiency of 97% and a capacitance retention of 90.25%. The high-performance NG//MCS (1:2) HSC may be a potential candidate alternative to the existing conventional material.

Synthesis of Binder-Free, Low-Resistant Randomly Orientated Nanorod/Sheet ZnS-MoS2 as Electrode Materials for Portable Energy Storage Applications

The scientific community needs to conduct research on novel electrodes for portable energy storage (PES) devices like supercapacitors (S-Cs) and lithium-ion batteries (Li-ion-Bs) to overcome energy crises, especially in rural areas where no electrical poles are available. Herein, the nanostructured MoS2 and ZnS-MoS2 E-Ms consisting of nanoparticles/rods/sheets (N-Ps-Rs-Ss) are deposited on hierarchical nickel foam by a homemade chemical vapor deposition (H-M CVD) route. The X-ray diffraction patterns confirm the formation of polycrystalline films growing along various orientations, whereas the field-emission scanning electron microscope analysis confirms the formation of N-Ps-Rs-Ss. The change in structural and microstructural parameters indicates the existence of defects improving the energy storage ability of the deposited ZnS-MoS2@Ni-F electrodes. The specific capacitances of MoS2@Ni-F and ZnS-MoS2@Ni-F electrodes are found to be 1763 and 3565 F/g at 0.5 mV/s and 1451 and 3032 F/g at 1 A/g, respectively. The growing behavior of impedance graphs indicates their capacitive nature; however, the shifting of impedance curves toward y-axis indicates that the increasing diffusion rates due to the formation of nanostructures of ZnS-MoS2 results in low impedance. An excellent energy storage performance, minimum capacity fading, and improved electrical conductivity of the deposited E-Ms are due to the combined contributions of the electrical double layer and pseudocapacitor nature, which is again confirmed by theoretical Dunn's model. The absence of charge transfer resistance and good capacitance retention (95%) even after 10,000 cycles indicates that the deposited E-Ms are better for PES devices like S-Cs and Li-ion-Bs than MoS2 E-Ms. The assembled asymmetric supercapacitor device exhibited the maximum specific capacitance = 996 F/g, energy density = 354-285 W h/kg, power density = 2400-24,000 W/kg, capacitance retention = 95% and Coulombic efficiency = 100% even after a long charging-discharging of 10,000 cycles.

Pseudocapacitive Storage in Molybdenum Oxynitride Nanostructures Reactively Sputtered on Stainless-Steel Mesh Towards an All-Solid-State Flexible Supercapacitor

Exploiting pseudocapacitance in rationally engineered nanomaterials offers greater energy storage capacities at faster rates. The present research reports a high-performance Molybdenum Oxynitride (MoON) nanostructured material deposited directly over stainless-steel mesh (SSM) via reactive magnetron sputtering technique for flexible symmetric supercapacitor (FSSC) application. The MoON/SSM flexible electrode manifests remarkable Na+-ion pseudocapacitive kinetics, delivering exceptional ≈881.83 F g-1 capacitance, thanks to the synergistically coupled interfaces and junctions between nanostructures of Mo2N, MoO2, and MoO3 co-existing phases, resulting in enhanced specific surface area, increased electroactive sites, improved ionic and electronic conductivity. Employing 3D Bode plots, b-value, and Dunn's analysis, a comprehensive insight into the charge-storage mechanism has been presented, revealing the superiority of surface-controlled capacitive and pseudocapacitive kinetics. Utilizing PVA-Na2SO4 gel electrolyte, the assembled all-solid-state FSSC (MoON/SSM||MoON/SSM) exhibits impressive cell capacitance of 30.7 mF cm-2 (438.59 F g-1) at 0.125 mA cm-2. Moreover, the FSSC device outputs a superior energy density of 4.26 µWh cm-2 (60.92 Wh kg-1) and high power density of 2.5 mW cm-2 (35.71 kW kg-1). The device manifests remarkable flexibility and excellent electrochemical cyclability of ≈91.94% over 10,000 continuous charge-discharge cycles. These intriguing pseudocapacitive performances combined with lightweight, cost-effective, industry-feasible, and environmentally sustainable attributes make the present MoON-based FSSC a potential candidate for energy-storage applications in flexible electronics.

Superior Cyclic Stability and Capacitive Performance of Cation- and Water Molecule-Preintercalated δ-MnO2/h-WO3 Nanostructures as Supercapacitor Electrodes

The large number of active sites in the layered structure of δ-MnO2 with considerable interlayer spacing makes it an excellent candidate for ion storage. Unfortunately, the δ-MnO2-based electrode has not yet attained the exceptional storage potential that it should demonstrate because of disappointing structural deterioration during periodic charging and discharging. Here, we represent that stable Na ion storage in δ-MnO2 may be triggered by the preintercalation of K ions and water molecules. Furthermore, the sluggish reaction kinetics and poor electrical conductivity of preintercalated δ-MnO2 layers are overcome by the incorporation of h-WO3 in the preintercalated δ-MnO2 to form novel composite electrodes. The composites contain mixed valence metals, which provide a great number of active sites along with improved redox activity, while maintaining a fast ion transfer efficiency to enhance the pseudocapacitance performance. Based on our research, the composite prepared from preintercalated δ-MnO2 with 5 wt % h-WO3 provides a specific capacitance of up to 363.8 F g-1 at a current density of 1.5 A g-1 and an improved energy density (32.3 W h kg-1) along with an ∼14% increase in capacity upon cycling up to 5000 cycles. Hence, the interaction between the preintercalated δ-MnO2 and h-WO3 nanorods results in satisfactory energy storage performance due to the defect-rich structure, high conductivity, superior stability, and lower charge transfer resistance. This research has the potential to pave the way for a new class of hybrid supercapacitors that could fill the energy gap between chemical batteries and ideal capacitors.

Facile Synthesis of Biocarbon-Based MoS2 Composite for High-Performance Supercapacitor Application

Nanocomposites are gaining high demand for the development of next-generation energy storage devices because of their eco-friendly and cost-effective natures. However, their short-term energy retainability and marginal stability are regarded as hindrances to overcome. In this work, we demonstrate a high-performance supercapacitor fabricated by biocarbon-based MoS₂ (Bio-C/MoS₂) nanoparticles synthesized by a facile hydrothermal approach using date fruits. Here, we report the high specific capacitance for a carbon-based nanocomposite employing the pyrolysis technique of converting agricultural biowaste into a highly affordable energy resource. The biocompatible Bio-C/MoS₂ nanospheres exhibited a high capacitance of 945 F g^-1 at a current density of 0.5 A g^-1 and an excellent reproducing stability of 92% after 10000 charge/discharge cycles. In addition, the Bio-C/MoS₂ NS showed an exceptional power density of 3800-8000 W kg^-1 and an energy density of 74.9-157 Wh kg^-1. The results would pave a new strategy for design of eco-friendly materials toward the high-performance energy storage technology.