Relationship between Surface Hydroxyl Complexation and Equi-Acidity Point pH of MnO2 and Its Adsorption for Co2+ and Ni2

Redox Oscillation Enhanced Water-Enabled Electric Generator

The energy crisis driven by the widespread use of fossil fuels highlights the urgent need for green energy solutions. A variety of green electric generators based on interfacial ion regulation have emerged in recent years. However, conventional electricity generation methods that rely solely on ion movement at interfaces suffer from a rapid decline in electrical signals due to poor ion-electron conversion at the interface. Inspired by the bioelectrical phenomena based on the variations in membrane potential and the glucose oxidation/reduction reactions, a redox oscillation enhanced water-enabled electric generator is herein proposed. The oscillating redox process not only boosts the ion-electron conversion at the interface but also enables the synergy between the non-Faraday current and the Faraday current. As a result, the generator achieves an impressive peak electric output of 1.20 mA cm-2 and 0.41 W m-2 for 60 days, outperforming various water-enabled electric generators. Furthermore, this generator can be integrated into a flexible unit for both portable and large-scale applications. This work presents a novel approach for enhancing the output of green energy devices based on interfacial ion migration.

Study of the Reaction Mechanism of the Excessive Adsorption of Mn2+ from Water by In Situ Synthesis of MnO2@SiO2 Colloid as an Adsorbent

An in situ-generated MnO2@SiO2 colloidal (ISMC) composite was used for the adsorption of Mn2+ ions in water. The adsorption capacity of ISMC at a concentration of 1 mg/L at 25 °C was as high as 3017.97 mg/g for the original concentration of 50 mg/L Mn2+ ions. Material characterization revealed that it is a porous sponge with a fibrous structure with a rough surface, many folds, and abundant pores, and these features provide many adsorption sites, which are conducive to the attachment of Mn2+ ions on its surface. ISMC has an isoelectric point of 3.5, indicating a negative surface charge that favors electrostatic attraction of Mn2⁺ ions. The surface hydroxyl groups provide additional active sites that allow for strong complexation with Mn2⁺ ions. Adsorption conformed to the Freundlich isotherm model (R2 > 0.98), suggesting multilayer adsorption, followed by pseudo-second-order kinetics (R2 > 0.98), with an optimum adsorption time of approximately 12 h. Low temperatures favor physical adsorption, whereas higher temperatures promote chemisorption via hydroxyl group complexation. The adsorption capacity increased with pH, which was attributed to the increased presence of surface hydroxyl groups. These findings highlight the significant potential of ISMCs for cation adsorption in water treatment applications.

Toward the Rechargeable Aqueous Zinc Ion Batteries with Improved Overall Performance: Electrolyte with Surface Adsorptive Additive

Aqueous zinc-ion batteries (AZIBs) with slightly acidic electrolytes process advantages such as high safety, competitive cost, and satisfactory electrochemical performance. However, the failure behaviors of both electrodes, regarding zinc dendrite growth, interfacial parasitic reactions, and the collapse of cathode materials hinder the practical application of ZIBs. To alleviate the issues of both anode and cathode at the same time, D-xylose (DX) is introduced to the electrolyte as a multifunctional additive. As a result, the side reaction of the anode is suppressed and the metallic deposition behavior is regulated due to the hydrogen bonding network reconstruction and preferential surface adsorption of DX; for the MnO2 cathode, the DX adsorption can help the interfacial charge transfer and increase the reactive sites. Benefiting from these merits, DX-optimized Zn//Zn battery displays reveal a prolonged lifespan of 6912 h and an ultra-high cumulative capacity of 17.28 Ah cm-2 at 5 mA cm-2. With the function of water reactivity suppression, the Coulombic efficiency reaches 99.91% at 2 mA cm-2; the Zn||MnO2 full batteries exhibit excellent cyclability over 2000 cycles at 5C with an increased capacity of 118.9 mAh g-1, indicating the dual functions to both of the electrodes for AZIBs.

Crystal phase-driven performance of MnO2 in aqueous phase low-temperature thermal catalysis: Synergistic interactions between Mn3+ and surface lattice oxygen

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, β-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and β-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2-) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

Controlled construction of 2D hierarchical core-shell ZnO/MnO2 nanosheets on Nitinol fiber with enhanced adsorption performance for selective solid-phase microextraction of trace polycyclic aromatic hydrocarbons in water samples

BACKGROUND

Polycyclic aromatic hydrocarbons (PAHs) are an important class of potentially toxic persistent organic pollutants in environmental water. Their concentrations are usually too low to allow for direct determination with analytical instruments, and the preconcentration is required prior to instrumental analysis. Solid phase microextraction (SPME) is considered as a high-performance green sample preparation technique for volatile and non-volatile organic compounds due to its high enrichment factor. In fact, the nature of SPME coatings governs the adsorption performance. Therefore, more efforts have devoted to the controlled construction of novel long-life SPME fibers with enhanced adsorption performance and improved adsorption selectivity.

RESULTS

2D hierarchical core-shell ZnO/MnO2 nanosheets (NSs) were constructed on a Nitinol (NiTi) fiber substrate by layer-by-layer assembly for enhanced and selective SPME of PAHs. Firstly, hexagonal ZnO NSs were electrodeposited on the NiTi substrate. Subsequently smaller secondary MnO2 NSs were uniformly grown on the surface of ZnO NSs by a facile hydrothermal oxidation process. ZnO NSs were well protected by the chemically stable MnO2 shell, making the coating highly durable and efficient for SPME application. Meanwhile, the ZnO/MnO2 NSs coating demonstrated superior adsorption performance for PAHs. After the optimization of SPME conditions, the proposed SPME-HPLC-UV method exhibited good analytical performance for preconcentrating and determining trace PAHs with wide linear ranges (0.03-200 μg L-1) and low LODs (0.005-0.112 μg L-1) as well as good repeatability (1.4%-6.9%) and fiber-to-fiber reproducibility (5.3%-7.1%). Moreover, the proposed method showed good precision and recovery in the preconcentration and determination of target PAHs in real water samples.

SIGNIFICANCE

As compared with representative commercially available fibers, the NiTi@ZnO/MnO2 NSs fiber showed enhanced adsorption efficiency and improved adsorption selectivity for PAHs. The constructed fiber can be used as an alternative to commercial fibers for the adsorption and preconcentration of target PAHs in the environmental water samples. Moreover, the preparation strategy is expected to provide new insights into the precisely controlled construction of the efficient and stable core-shell bimetallic oxide nanostructures on the superielastic NiTi-based fibers.

Potassium Permanganate-Impregnated Amorphous Silica-Alumina Derived from Sugar Cane Bagasse Ash as an Ethylene Scavenger for Extending Shelf Life of Mango Fruits

Ethylene, a plant hormone, is a gas that plays a crucial role in fruit ripening and senescence. In this work, a novel ethylene scavenger was prepared from amorphous silica-alumina derived from sugar cane bagasse ash (SC-ASA) and used to prolong the shelf life of mango fruits during storage. KMnO4 at 2, 4, or 6 wt %/w was loaded on SC-ASA using an impregnation method. The results showed that 4% w/w KMnO4 loaded on SC-ASA (4KM/SC-ASA) was superior for ethylene removal at an initial ethylene concentration of 400 μL L-1 for 120 min under ambient conditions (25-27 °C and 70-75% relative humidity), resulting in 100% ethylene removal. The kinetic study of ethylene removal showed that the adsorption data were best fitted with a pseudo-first-order kinetic model. The effects of 4KM/SC-ASA as sachets on the quality changes of the mango fruits were investigated, with the results showing that mango fruits packed in cardboard boxes with 4KM/SC-ASA had significantly delayed ripening, low levels of ethylene production, respiration, and weight loss, high fruit firmness, low total soluble solids, and high acidity compared to those of the control treatment. These findings should contribute to developing an ethylene scavenger to extend the shelf life of fruits, reduce the waste of the sugar and ethanol industries, and make it a valuable material.

Controlled synthesis of Fe3O4/MnO2 (3 1 0)/ZIF-67 composite with enhanced synergetic effects for the highly selective and efficient adsorption of Cu (II) from simulated copperplating effluents

This study designed a composite material with internal synergistic effects among multiple components to achieve highly selective adsorption of Cu (II). Through controlled synthesis, the Fe3O4/MnO2(3 1 0)/ZIF-67 composite was successfully fabricated, leading to significant improvement in adsorption selectivity, capacity, and adsorption rate. The experimental results showed that the composite is of outstanding selectivity in the adsorption of Cu (II), with a partition coefficient K of Cu (II) that was 2.2-5.3 times higher than that of other coexisting ions. Moreover, the composite exhibited a remarkable adsorption capacity of 1261.0 mg g-1 and a fast adsorption rate of 840.7 mg g-1 h-1 at 298 K. Additionally, its magnetic property facilitated easy separation from wastewater, thereby enhancing its potential for commercial applications. The synergetic effect mechanism was analyzed through characterizations and DFT calculations. Furthermore, the recyclability of the composite was investigated, which showed that after seven cycles, the adsorption efficiency remained at 85% of its initial efficiency. It can be concluded that Fe3O4/MnO2(3 1 0)/ZIF-67 has potential to address challenges posed by heavy metal pollution in copperplating effluents.

Efficacy and mechanisms of δ-MnO2 modified biochar with enhanced porous structure for uranium(VI) separation from wastewater

Even though uranium (U) is considered to be an essential strategic resource with vital significance to nuclear power development and climate change mitigation, U exposure to human and ecological environment has received growing concerns due to its both highly chemically toxic and radioactively hazardous property. In this study, a composite (M-BC) based on Ficus macrocarpa (banyan tree) aerial roots biochar (BC) modified by δ-MnO2 was designed to separate U(VI) from synthetic wastewater. The results showed that the separation capacity of M-BC was 61.53 mg/g under the solid - liquid ratio of 1 g/L, which was significantly higher than that of BC (12.39 mg/g). The separation behavior of U(VI) both by BC and M-BC fitted well with Freundlich isothermal models, indicating multilayer adsorption occurring on heterogeneous surfaces. The reaction process was consistent with the pseudo-second-order kinetic model and the main rate-limiting step was particle diffusion process. It is worthy to note that the removal of U(VI) by M-BC was maintained at 94.56% even after five cycles, indicating excellent reusability and promising application potential. Multiple characterization techniques (e.g. Scanning Electron Microscope-Energy Dispersive Spectrometer (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) and X-ray Photoelectron Spectroscopy (XPS)) uncovered that U(VI) complexation with oxygen-containing functional groups (e.g. O-CO and Mn-O) and cation exchange with protonated ≡MnOH were the dominant mechanisms for U(VI) removal. Application in real uranium wastewater treatment showed that 96% removal of U was achieved by M-BC and more than 92% of co-existing (potentially) toxic metals such as Tl, Co, Pb, Cu and Zn were simultaneously removed. The work verified a feasible candidate of banyan tree aerial roots biowaste based δ-MnO2-modified porous BC composites for efficient separation of U(VI) from uranium wastewater, which are beneficial to help address the dilemma between sustainability of nuclear power and subsequent hazard elimination.

Screening of MnO2 with desired facet and its behavior in highly selective adsorption of aqueous Pb (II): Theoretical and experimental studies

In this study, Density Functional Theory (DFT) calculations and experimental methods were used to evaluate MnO₂ with 5 different facets for their selective adsorption of Pb (II) from wastewater containing Cd (II), Cu (II), Pb (II), and Zn (II). The DFT calculations were used to screen the selective adsorption capability of the facets and demonstrated that the MnO₂ (3 1 0) facet has an excellent performance in selective adsorption of Pb (II) among all facets. The validity of DFT calculations was verified by comparing with the experimental results. MnO₂ with different facets was prepared in a controlled manner and the characterizations confirmed that the lattice indices of the fabricated MnO₂ have the desired facets. Adsorption performance experiments illustrated a high adsorption capacity (320.0 mg/g) on the (3 1 0) facet MnO₂. The selectivity of adsorption of Pb (II) was 3-32 times greater than that of the other coexisting ions, i.e., Cd (II), Cu (II), and Zn (II)), which is consistent with results of the DFT calculations. Furthermore, DFT calculations of the adsorption energy, charge density difference, and projected density of states (PDOS) showed that the adsorption of Pb (II) on the MnO₂ (3 1 0) facet is non-activated chemisorption. This study shows that it is feasible to use DFT calculations to quickly screen suitable adsorbents for environmental applications.

Physicochemical properties of different crystal forms of manganese dioxide prepared by a liquid phase method and their quantitative evaluation in capacitor and battery materials

Although there are many studies on the preparation and electrochemical properties of the different crystal forms of manganese dioxide, there are few studies on their preparation by a liquid phase method and the influence of their physical and chemical properties on their electrochemical performance. In this paper, five crystal forms of manganese dioxide were prepared by using manganese sulfate as a manganese source and the difference of their physical and chemical properties was studied by phase morphology, specific surface area, pore size, pore volume, particle size and surface structure. The different crystal forms of manganese dioxide were prepared as electrode materials, and their specific capacitance composition was obtained by performing CV and EIS in a three-electrode system, introducing kinetic calculation and analyzing the principle of electrolyte ions in the electrode reaction process. The results show that δ-MnO₂ has the largest specific capacitance due to its layered crystal structure, large specific surface area, abundant structural oxygen vacancies and interlayer bound water, and its capacity is mainly controlled by capacitance. Although the tunnel of the γ-MnO₂ crystal structure is small, its large specific surface area, large pore volume and small particle size make it have a specific capacitance that is only inferior to δ-MnO₂, and the diffusion contribution in the capacity accounts for nearly half, indicating it also has the characteristics of battery materials. α-MnO₂ has a larger crystal tunnel structure, but its capacity is lower due to the smaller specific surface area and less structural oxygen vacancies. ε-MnO₂ has a lower specific capacitance is not only the same disadvantage as α-MnO₂, but also the disorder of its crystal structure. The tunnel size of β-MnO₂ is not conducive to the interpenetration of electrolyte ions, but its high oxygen vacancy concentration makes its contribution of capacitance control obvious. EIS data shows that δ-MnO₂ has the smallest charge transfer impedance and bulk diffusion impedance, while the two impedances of γ-MnO₂ were the largest, which shows that its capacity performance has great potential for improvement. Combined with the calculation of electrode reaction kinetics and the performance test of five crystal capacitors and batteries, it is shown that δ-MnO₂ is more suitable for capacitors and γ-MnO₂ is more suitable for batteries.

Study on the Adsorption Mechanism of Cobalt and Nickel in Manganese Sulfate by δ-MnO2

Manganese has excellent performance in removing metal ions from aqueous solutions, but there are few studies on the adsorption and removal of heavy metal impurities in metal salt solutions. In this paper, the adsorption of cobalt and nickel ions in MnSO₄ solution by δ-MnO₂ prepared from two different manganese sources was studied. The optimum adsorption conditions were as follows: When the concentration of Mn²⁺ was 20 g/L, δ-MnO₂ addition was 10 g/L, Co²⁺ concentration was 80 mg/L, Ni²⁺ concentration was 80 mg/L, reaction time was 60 min, reaction temperature was 80 °C, and pH value was 7, the adsorption rate of Co²⁺ and Ni²⁺ reached more than 80%. The manganese dioxide adsorbed by heavy metals was analyzed and detected. The results showed that MnOOH appeared in the phases of both kinds of δ-MnO₂, and their morphologies were dense rod-like structures with different lengths and flake-like structures of fine particles. Co and Ni were distributed on the surface and gap of MnO₂ particles, and the atomic percentage of Co was slightly higher than that of Ni. The new vibration peaks appeared near wave numbers of 2668.32, 1401.00, and 2052.19 cm^-1, which were caused by the complexation of cations such as Co^2 + and Ni^2 + with hydroxyl groups. Some cobalt and nickel appeared on the surface of δ-MnO₂, and the surface oxygen increased after adsorption. The above characterization revealed that the adsorption of cobalt and nickel in manganese sulfate by δ-MnO₂ was realized by the reaction of its surface hydroxyl with metal ions (M) to form ≡SOMOH.