A Review of the Effect of Porous Media on Gas Hydrate Formation

Molecular Insights into Hybrid CH4 Physisorption-Hydrate Formation in Spiral Halloysite Nanotubes: Implications for Energy Storage

A microscopic insight into hybrid CH4 physisorption-hydrate formation in halloysite nanotubes (HNTs) is vital for understanding the solidification storage of natural gas in the HNTs and developing energy storage technology. Herein, large-scale microsecond classical molecular dynamics simulations are conducted to investigate CH4 storage in the HNTs via the adsorption-hydration hybrid (AHH) method to reveal the effect of gas-water ratio. The simulation results indicate that the HNTs are excellent nanomaterials for CH4 storage via the adsorption-hydration hybrid method. The CH4 physisorption and hydrate formation inside and outside of the HNTs are profoundly influenced by the surface properties of the HNTs and the kinetic characteristics of CH4/H2O molecules. The outer surfaces of the HNTs exhibit relative hydrophobicity and adsorb CH4 molecules to form nanobubbles. Moreover, CH4 molecules adsorbed on the outer surface are tightly trapped between the hydrate solids and the outer surface, inhibiting their kinetic behavior and favoring CH4 storage via physisorption. The inner surface of the HNTs exhibits extreme hydrophilicity and strongly adsorbs H2O molecules; thus, CH4 hydrate can form inside of the HNTs. It is more difficult for CH4 and H2O molecules inside of the HNTs to convert into hydrates than for those outside of the HNTs. A moderate gas-water ratio is advantageous for CH4 physisorption and hydrate formation, whereas excessively high or low gas-water ratios are unfavorable for efficient CH4 storage. These insights can help to develop an efficient CH4 solidification storage technology.

Surface modification of mesostructured cellular foam to enhance hydrogen storage in binary THF/H2 clathrate hydrate

This study introduces solid-state tuning of a mesostructured cellular foam (MCF) to enhance hydrogen (H2) storage in clathrate hydrates. Grafting of promoter-like molecules (e.g., tetrahydrofuran) at the internal surface of the MCF resulted in a substantial improvement in the kinetics of formation of binary H2-THF clathrate hydrate. Identification of the confined hydrate as sII clathrate hydrate and enclathration of H2 in its small cages was performed using XRD and high-pressure 1H NMR spectroscopy respectively. Experimental findings show that modified MCF materials exhibit a ∼1.3 times higher H2 storage capacity as compared to non-modified MCF under the same conditions (7 MPa, 265 K, 100% pore volume saturation with a 5.56 mol% THF solution). The enhancement in H2 storage is attributed to the hydrophobicity originating from grafting organic molecules onto pristine MCF, thereby influencing water interactions and fostering an environment conducive to H2 enclathration. Gas uptake curves indicate an optimal tuning point for higher H2 storage, favoring a lower density of carbon per nm2. Furthermore, a direct correlation emerges between higher driving forces and increased H2 storage capacity, culminating at 0.52 wt% (46.77 mmoles of H2 per mole of H2O and 39.78% water-to-hydrate conversions) at 262 K for the modified MCF material with fewer carbons per nm2. Notably, the substantial H2 storage capacity achieved without energy-intensive processes underscores solid-state tuning's potential for H2 storage in the synthesized hydrates. This study evaluated two distinct kinetic models to describe hydrate growth in MCF. The multistage kinetic model showed better predictive capabilities for experimental data and maintained a low average absolute deviation. This research provides valuable insights into augmenting H2 storage capabilities and holds promising implications for future advancements.

Advances in Nanomaterials for Sustainable Gas Separation and Storage: Focus on Clathrate Hydrates

ConspectusClathrate hydrates, also known as gas hydrates, are a type of inclusion compound formed in highly developed nanoporous lattice spaces created by water molecules, where gas molecules such as CO2, H2, CH4, and other low-molecular-weight liquid molecules are trapped. The nanoporous cage formed by water molecules serves as the "host", while the trapped gas or low-molecular-weight liquid molecules such as tetrahydrofuran act as "guests". Early on, clathrate hydrates drew attention as a potential replacement for conventional natural gas due to their natural gas hydrate form, which contains natural gases as guests and exists in permafrost or sea floors. Recently, based on the unique physicochemical properties of clathrate hydrates, efforts are being made to utilize synthetic clathrate hydrates in various separation processes such as post- and pre-combustion CO2 capture, H2 storage, natural gas storage and transportation, wastewater desalination, and more. While it is undeniable that clathrate hydrates are based on principles that are beneficial for the separation and storage of gas molecules, there are several challenges that must be addressed for their practical application. These challenges include (i) the limitation of gas storage capacity due to the confined size of nanoporous cages, (ii) the relatively high-pressure and low-temperature thermodynamic storage conditions typically required for clathrate hydrate formation, and (iii) slow formation kinetics and low gas hydrate conversion, which are also essential issues that need to be resolved for the meaningful implementation of clathrate hydrates. In this Account, we aim to introduce recent noteworthy research findings, including those from our research team, focusing on addressing these challenges. We explored the untapped potential of clathrate hydrates by bridging the gap between macroscopic and microscopic properties. This has led to breakthroughs in sustainable gas separation and storage applications. By revealing the hidden nature of these hydrates, we have effectively mitigated their inherent limitations, setting the stage for more feasible and efficient H2 storage solutions through the introduction of hydrogen-natural gas blends to clathrate hydrates. Additionally, we have demonstrated the tuning effect on all naturally formed hydrate structures, offering new insights into their underlying properties and macroscopic behavior. Furthermore, our research has proposed a highly efficient hydrate-based pre-combustion CO2 capture approach that leverages porous media with appropriate wettability and considers the implications of microstructure properties. This emphasizes the crucial connection between nano-structure and macroscopic properties, underscoring the significance of understanding their interplay for economic feasibility. We believe that our efforts to unveil the hidden nature of gas hydrates provide strategies to address challenges and lay the groundwork for practical applications.

Dry Water as a Promoter for Gas Hydrate Formation: A Review

Applications of clathrate hydrate require fast formation kinetics of it, which is the long-standing technological bottleneck due to mass transfer and heat transfer limitations. Although several methods, such as surfactants and mechanical stirring, have been employed to accelerate gas hydrate formation, the problems they bring are not negligible. Recently, a new water-in-air dispersion stabilized by hydrophobic nanosilica, dry water, has been used as an effective promoter for hydrate formation. In this review, we summarize the preparation procedure of dry water and factors affecting the physical properties of dry water dispersion. The effect of dry water dispersion on gas hydrate formation is discussed from the thermodynamic and kinetic points of view. Dry water dispersion shifts the gas hydrate phase boundary to milder conditions. Dry water increases the gas hydrate formation rate and improves gas storage capacity by enhancing water-guest gas contact. The performance comparison and synergy of dry water with other common hydrate promoters are also summarized. The self-preservation effect of dry water hydrate was investigated. Despite the prominent effect of dry water in promoting gas hydrate formation, its reusability problem still remains to be solved. We present and compare several methods to improve its reusability. Finally, we propose knowledge gaps in dry water hydrate research and future research directions.