Synthesis of Biomass-Derived Activated Carbons and Their Immobilization on Alginate Gels for the Simultaneous Removal of Cr(VI), Cd(II), Pb(II), As(III), and Hg(II) from Water

"Green" electrostatic droplet-assisted forming cellulose microspheres with excellent structural controllability and stability for efficient Cr(VI) removal

This study presents a novel and environmentally friendly method for producing cellulose microspheres (CM) with controllable morphology and size using electrostatic droplets. The traditional droplet method for CM production requires complex equipment and harmful reagents. In contrast, the proposed method offers a simple electrostatic droplet approach to fabricate CM10 at 10 kV, which exhibited a smaller volume, linear microscopic morphology, and a larger specific surface area, with a 36.60 % improvement compared to CM0 (prepared at 0 kV). CM10 also demonstrated excellent underwater structural stability, recovering in just 0.5 s, and exhibited the highest adsorption capacity for Cr(VI) at 190.16 mg/g, a 72.15 % improvement over CM0. This enhanced adsorption capacity can be attributed to the unique structure of CM10 and the introduction of more amino groups. Moreover, CM10 displayed good cyclic adsorption capacity and high dynamic adsorption efficiency, making it highly suitable for practical applications. CM10 exhibited remarkable adsorption capacity, stability, and practical value in treating Cr(VI) wastewater. This work proposes a simple and eco-friendly method for producing CM with excellent structural controllability and stability, providing an effective route for wastewater treatment.

Thiol-Functionalized MIL-100(Fe)/Device for the Removal of Heavy Metals in Water

The preparation of a functional device based on a functionalized MIL-100(Fe) metal-organic framework for the solid-phase extraction of heavy metals is reported. By a simple and easy straightforward grafting procedure, a thiol-functionalized MIL-100(Fe) material (MIL-100(Fe)-SH) with a S/Fe ratio of 0.80 and a surface area of 840 m2 g-1 was obtained. MIL-100(Fe)-SH exhibited a higher Hg(II) extraction (96 ± 5%) than that of MIL-100(Fe) (78 ± 4%) due to the interaction between thiol groups and Hg(II) ions. For practical applications, the obtained MIL-100(Fe)-SH was integrated by a simple method to a 3D printed support based on a matrix of interconnected cubes using poly(vinylidene fluoride) as binder, obtaining a functional device that simultaneously acts as stirrer and sorbent. The developed device showed high efficiency for the removal of Hg(II), good reusability, and excellent performance for the simultaneous preconcentration and further detection and quantification of Hg(II), Pb(II), and As(V) in tap, well, and lake water samples.