Preparation and Adsorption Behavior of Ce(III)-MOF for Phosphate and Fluoride Ion Removal from Aqueous Solutions

Synthesis of zirconium-based metal-organic framework/gelatin aerogel for removing phosphate and fluoride from aqueous solutions

This study describes the preparation of novel hybrid aerogels derived from gelatin (Gel), incorporating Br-functionalized zirconium-based metal-organic framework (UiO-66-Br; MOF) as modifying agent to effectively eliminate phosphate and fluoride ions from aqueous environments. The adsorption performance of MOF decorated Gel (Gel-xMOF) hybrid aerogels was investigated under different conditions, including agitation time, adsorbent dosage, solution pH, initial phosphate and fluoride concentrations, coexisting ions, and temperature. The functional groups of the gelatin network, coupled with UiO-66-Br, enhanced the adsorption performance of phosphate and fluoride ions from aqueous solutions. The structural features and physicochemical parameters were evaluated using several characterization tools. The mesoporous Gel-1.5MOF aerogels exhibited Langmuir adsorption capacities of 20.8 and 7.42 mg/g for phosphate and fluoride, respectively. Reusability and coexisting experiment results suggest that the as-prepared Gel-1.5MOF aerogels have the potential for practical applications. Electrostatic attraction and ligand exchange primarily govern the adsorption mechanism of both ions, followed by hydrogen bonding and pore-filling mechanisms. This investigation offers new insights into the successful elimination of phosphate and fluoride ions across a broad pH range.

Enhancing fluoride ion removal from aqueous solutions and glass manufacturing wastewater using modified orange peel biochar magnetic composite with MIL-53

In this study, we developed new adsorbents derived from orange peel biochar (BCOP) and enhanced them with CoFe2O4 magnetic nanoparticles (BCOP/CoFe2O4) and MIL-53(Al) (BCOP/CoFe2O4/MIL-53(Al)). These adsorbents were utilized to remove fluoride (FL) ions from aqueous solutions. We analyzed the properties of these adsorbents using a range of techniques, including FTIR, XRD, SEM, EDX-Map, VSM, Raman spectroscopy, and BET. Our findings indicate that the components interact effectively with one another. Specifically, the BCOP/CoFe2O4/MIL-53(Al) sample exhibited a specific surface area of 196.430 m2/g and a magnetic saturation value of 9.704 emu/g. The maximum FL ion adsorption capacities for BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) were 7.618, 16.330, and 37.320 mg/g, respectively, indicating that the modifications significantly enhanced the adsorption capacity. The optimum fluoride ion removal rates using BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) were 97.88%, 98.23%, and 99.06%, respectively, at adsorbent doses of 2.5, 1.5, and 0.8 g/L, contact times of 90, 70, and 50 min, pH 4, temperature 50 °C, and a FL concentration of 10 mg/L. Thermodynamic studies revealed that the adsorption process was spontaneous and endothermic, with increased randomness between the adsorbent and fluoride ions. Kinetic analyses showed that fluoride ion adsorption by BCOP/CoFe2O4/MIL-53(Al) followed a pseudo-second-order (PSO) model, while BCOP and BCOP/CoFe2O4 followed a pseudo-first-order (PFO) model. Additionally, the equilibrium data for fluoride ion adsorption on BCOP/CoFe2O4/MIL-53(Al) adhered to the Freundlich model, whereas the other samples conformed to the Langmuir model. The study evaluates the effectiveness of BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) in removing FL ions from glass manufacturing wastewater, highlighting the superior performance of the magnetic composite due to its enhanced surface area and functional groups. Notably, the adsorbents demonstrated good regenerative capabilities, maintaining high performance over multiple adsorption cycles.

Controlling Triboelectric Charge of MOFs by Leveraging Ligands Chemistry

Metal-organic frameworks (MOFs) have emerged as promising materials for triboelectric nanogenerators (TENGs), but the effects of ligand choice on triboelectric charge remain underexplored. Hence, this paper demonstrates the effect of single, binary, and ternary ligands on TENG performance of cobalt/cerium-based (Co─Ce) bimetallic MOFs utilizing 2-methylimidazole (2Melm), terephthalic acid (BDC), and benzene tricarboxylic acid (BTC) as ligands. The detailed structural characterization revealed that varying ligand chemistries led to distinct MOF features affecting TENG performance. Single ligand bimetallic MOFs (designated as CoCe-2MeIm, CoCe-BDC, CoCe-BTC) has lower performance than binary ligand (designated as CoCe-2MeIm-BDC, CoCe-2MeIm-BTC, CoCe-BDC-BTC) and ternary ligand MOFs (designated as CoCe-2MeIm-BDC-BTC). Among all, the binary ligand MOF, CoCe-2MeIm-BTC, shows the best results (598 V, 26.7 µA) due to the combined effect of imidazole ring and (─COO─) groups. This is attributed to lone pairs on nitrogen atoms and a delocalized π-electron system in imidazole system in this material. CoCe-BTC has the lowest results (31 V, 3.2 µA) due to the bulkier nature of the electron-withdrawing (─COO─) groups and their impact on the π-electron system of the benzene ring. This study showcases the potential of ligand chemistry manipulation to control triboelectric charge and thereby enhance MOF-based TENG performance.

Effective removal and adsorption mechanism of fluoride from water by biochar-based Ce(III)-La(III)-crosslinked sodium alginate hybrid hydrogel

An eco-friendly macroparticle biochar (BC)-based Ce(III)-La(III) crosslinked sodium alginate (SA) hybrid hydrogel (BC/Ce-SA-La) was synthesized by droplet polymerization and characterized by SEM-EDS, XRD, FTIR, UV-Vis and XPS. The effects of dosage, pH, contact time, temperature and coexisting ions on the F- ions removal by hybrid hydrogel, and the adsorption performance, interaction mechanism and reusability were investigated. The results demonstrate that the composite has a fancy wrinkle structure with a particle size of about 1.8 mm and abundant porosity on the surface. The removal rate of F- ions by BC/Ce-SA-La reached 90.2 % under the conditions of pH 2.0, 200 min of contact time and 298 K. The adsorption behavior was perfectly explained by Langmuir model, and the maximum adsorption capacity reached 129 mg/g. The adsorption process was an endothermic spontaneous reaction and followed Pseudo-second-order rate model. The strong adsorption was attributed to multi-interactions including complexation, hydrogen bonding and electrostatic adsorption between the composite and F- ions. Coexisting ions hardly interfered with the adsorption of F- ions by BC/Ce-SA-La except for a slight effect of phosphate. The composite after F- ion adsorption was easily separated and could be reused at least three times. BC/Ce-SA-La is a cost-effective and promising granular biosorbent.

A novel ionic liquid-entrapped MIL-101(Cr) framework with enhanced removal efficiency towards phosphate from aqueous solution

Developing adsorbent materials with high adsorptive dephosphorization (ADP) is significant for treating phosphate from aqueous solutions and eutrophic water. Herein, the MIL-101(Cr) framework was entrapped ionic liquid (IL) of 1-butyl-3-methylimidazoliumbromide ionic liquid ([C4mem]+[Br]-) using a ship-in-a-bottle approach to obtain novel adsorbents [C4mem]+[Br]-@MIL-101(Cr) contained varied IL contents, namely C4mem@MIL-101. The characterization results revealed that the formed [C4mem]+[Br]- molecules interacted with the MIL-101(Cr) frameworks, enhanced their stability, and offered additional adsorption sites. The batch adsorptions of phosphate showed that the optimized C4mem@MIL-101 adsorbent loaded with ~ 7% IL-based N content had the highest phosphate absorbing capacity of ~ 200 mg/g, outperforming the pristine MIL-101(Cr) and other adsorbents. The ADP efficiency was facilitated in the acidic media, where the phosphate ions of H2PO4- and HPO42- captured onto the C4mem@MIL-101 via several interactions, including electrostatic attraction, H-bonds, and chemical interactions. In the meantime, the coexisting anions diminished the phosphate adsorption because they competed with the pollutants at adsorption sites. Furthermore, phosphate treatment under the continuous fixed-bed conditions showed that 1 g of the polyvinyl alcohol (PVA)-mixed C4mem@MIL-101 pellets purified 25 l of water containing phosphate with a 1 mg/l concentration. The results suggest that the novel [C4mem]+[Br]-@MIL-101(Cr) structure had a high potential for treating phosphate in aqueous solutions.