Optical Sensing of pH and O2 in the Evaluation of Bioactive Self-Healing Cement

Construction nanobiotechnology approach for performance enhancement of microbially induced biomineralization (MIB) using a biopolymer encapsulated spore-based system

The integration of green construction practices within the built environment has been significantly advanced by biotechnological innovations, among which microbially induced biomineralization (MIB), predominantly facilitated by various strains of spore-forming bacilli, emerges as a pivotal mechanism for the self-healing of concrete. However, the practical deployment of this technology faces challenges, notably the compromised viability of bacterial spores due to germination triggered by severe shear stress during concrete mixing. To address this limitation, a water-insoluble polymer (extracellular polymeric substance) produced by Cellulomonas flavigena was utilized to encapsulate and protect the spores. The encapsulation process was rigorously verified through physicochemical methodologies, including X-ray diffraction (XRD) analysis, which revealed alterations in the interlayer spacings of the extracellular polymeric substance (EPS) structure during the encapsulation process, indicating successful EPS coating of the spores. Furthermore, a proof of concept for the enhanced biomineralization capacity of EPS-coated spores was demonstrated. Standard analytical techniques confirmed the precipitation of calcite and vaterite among other minerals, underscoring the effectiveness of this novel approach. This breakthrough paves the way for the development of innovative, sustainable bioconcrete applications, aligning with broader environmental objectives and advancing the field of green construction technology.IMPORTANCEDevelopment of bioconcrete with self-healing capability through MIB constitutes an important sustainable construction biotechnology approach for restoration and repair of built environment. Like every promising technology, MIB also suffers from certain shortcomings in terms of compromised viability of the microbial cells after premature germination of the spores on exposure to shear stress caused during concrete mixing. In this study, these challenges were adequately addressed by successfully providing a protective coating of indigenously extracted EPS to the bacterial spores and elucidating the interactive mechanisms between them. The results showed stable encapsulation of the spores while providing mechanistic insights of the encapsulation phenomenon. The data also showed enhanced rate of biomineralization by encapsulated microbes when subjected to stress conditions.

On the Use of Polymer-Based Composites for the Creation of Optical Sensors: A Review

Polymers are widely used in many areas, but often their individual properties are not sufficient for use in certain applications. One of the solutions is the creation of polymer-based composites and nanocomposites. In such materials, in order to improve their properties, nanoscale particles (at least in one dimension) are dispersed in the polymer matrix. These properties include increased mechanical strength and durability, the ability to create a developed inner surface, adjustable thermal and electrical conductivity, and many others. The materials created can have a wide range of applications, such as biomimetic materials and technologies, smart materials, renewable energy sources, packaging, etc. This article reviews the usage of composites as a matrix for the optical sensors and biosensors. It highlights several methods that have been used to enhance performance and properties by optimizing the filler. It shows the main methods of combining indicator dyes with the material of the sensor matrix. Furthermore, the role of co-fillers or a hybrid filler in a polymer composite system is discussed, revealing the great potential and prospect of such matrixes in the field of fine properties tuning for advanced applications.

Porous matrix materials in optical sensing of gaseous oxygen

The review provides comparison of porous materials that act as a matrix for luminescent oxygen indicators. These include silica-gels, sol–gel materials based on silica and organically modified silica (Ormosils), aerogels, electrospun polymeric nanofibers, metal–organic frameworks, anodized alumina, and various other microstructured sensor matrices. The influence of material structure and composition on the efficiency of oxygen quenching and dynamic response times is compared and the advantages and disadvantages of the materials are summarized to give a guide for design and practical application of sensors with desired sensitivity and response time.

Hydrogel-Based Optical Ion Sensors: Principles and Challenges for Point-of-Care Testing and Environmental Monitoring

Hydrogel is a unique family of biocompatible materials with growing applications in chemical and biological sensors. During the past few decades, various hydrogel-based optical ion sensors have been developed aiming at point-of-care testing and environmental monitoring. In this Perspective, we provide an overview of the research field including topics such as photonic crystals, DNAzyme cross-linked hydrogels, ionophore-based ion sensing hydrogels, and fluoroionophore-based optodes. As the different sensing principles are summarized, each strategy offers its advantages and limitations. In a nutshell, developing optical ion sensing hydrogels is still in the early stage with many opportunities lying ahead, especially with challenges in selectivity, assay time, detection limit, and usability.

Optode Based Chemical Imaging-Possibilities, Challenges, and New Avenues in Multidimensional Optical Sensing

Seeing is believing, as the saying goes, and optical sensors (so-called optodes) are tools that can make chemistry visible. Optodes react reversibly and quickly (seconds to minutes) to changing analyte concentrations, enabling the spatial and temporal visualization of an analyte in complex environments. By being available as planar sensor foils or in the form of nano- or microparticles, optodes are flexible tools suitable for a wide array of applications. The steadily grown applications of in particular oxygen (O₂) and pH optodes in fields as diverse as medical, environmental, or material sciences is proof for the large demand of optode based chemical imaging. Nevertheless, the full potential of this technology is not exhausted yet, challenges have to be overcome, and new avenues wait to be taken. Within this Perspective, we look at where the field currently stands, highlight several successful examples of optode based chemical imaging and ask what it will take to advance current state-of-the-art technology. It is our intention to point toward some potential blind spots and to inspire further developments.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Visualizing NH3 emission and the local O2 and pH microenvironment of soil upon manure application using optical sensors

The application of fertilizers and manure on fields is the largest source of ammonia (NH₃) in the atmosphere.·NH₃ emission from agriculture has negative environmental consequences and is largely controlled by the chemical microenvironment and the respective biological activity of the soil. While gas phase and bulk measurements can describe the emission on a large scale, those measurements fail to unravel the local processes and spatial heterogeneity at the soil air interface. We report a two dimensional (2D) imaging approach capable of visualizing three of the most important chemical parameters associated with NH₃ emission from soil. Besides the released NH₃ itself also O₂ and pH microenvironments are imaged using reversible optodes in real-time with a spatial resolution of <100 µm. This combined optode approach utilizes a specifically developed NH₃ optode with a limit of detection of 2.11 ppm and a large working range (0-1800 ppm) ideally suited for studying NH₃ volatilization from soil. This NH₃ optode will contribute to a better understanding of the driving factors for NH₃ emission on a microscale and has the potential to become a valuable tool in studying NH₃ dynamics.

Biological Self-Healing of Cement Paste and Mortar by Non-Ureolytic Bacteria Encapsulated in Alginate Hydrogel Capsules

Crack formation in concrete is one of the main reasons for concrete degradation. Calcium alginate capsules containing biological self-healing agents for cementitious materials were studied for the self-healing of cement paste and mortars through in vitro characterizations such as healing agent survivability and retention, material stability, and biomineralization, followed by in situ self-healing observation in pre-cracked cement paste and mortar specimens. Our results showed that bacterial spores fully survived the encapsulation process and would not leach out during cement mixing. Encapsulated bacteria precipitated CaCO₃ when exposed to water, oxygen, and calcium under alkaline conditions by releasing CO₃²⁻ ions into the cement environment. Capsule rupture is not required for the initiation of the healing process, but exposure to the right conditions are. After 56 days of wet–dry cycles, the capsules resulted in flexural strength regain as high as 39.6% for the cement mortar and 32.5% for the cement paste specimens. Full crack closure was observed at 28 days for cement mortars with the healing agents. The self-healing system acted as a biological CO₃²⁻ pump that can keep the bio-agents retained, protected, and active for up to 56 days of wet-dry incubation. This promising self-healing strategy requires further research and optimization.

Effects of Nanoclay and Silica Flour on the Mechanical Properties of Class G Cement

The mechanical properties of oil well cement slurry are usually measured to evaluate the durability, sustainability, and long-lasting behavior of a cement sheath under wellbore conditions. High-pressure and high-temperature (HPHT) conditions affect the mechanical properties of cement slurry such as its strength, elasticity, and curing time. In this study, an organically modified montmorillonite nanoclay (NC) and silica flour (SF) materials are used to enhance the strength of the class G cement. Four different cement slurries with the addition of different concentrations of NC (1% and 2%) and SF (20%) in a class G cement were tested under temperatures ranging between 70 and 100 °C and pressure ranging between 1000 and 3000 psia. The slurries were prepared by maintaining a water to cement ratio of 0.44. All the slurries were cured for 24 h before any test was conducted. Extensive laboratory experiments were carried out to measure the compressive and tensile strength of cement slurries cured at HPHT conditions. Compressive strength was measured using unconfined compressive strength (UCS) tests, scratch tests, and ultrasonic cement analyzer (UCA). Tensile strength was measured using breakdown pressure tests and Brazilian disc test analysis. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and petrophysical analysis were also carried out to evaluate the performance of new cement additives at HPHT conditions. Results showed that the addition of organically modified NC and SF significantly increased the compressive and tensile strength of the class G cement slurry cured at HPHT conditions.