Efficient NH3 Detection Based on MOS Sensors Coupled with Catalytic Conversion

Preparation and NH3 gas-sensing properties of Ag/β-AgVO3 nanorods

NH3 gas sensors operating at room temperature, consisting of Ag nanoparticles decorated β-AgVO3 nanorods (Ag/β-AgVO3 NRs), were fabricated via a facile hydrothermal method without the need for a template. The surface characteristics and compositions of Ag/β-AgVO3 NRs were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Ag nanoparticles, ranging in diameter from approximately 20 to 40 nm, were dispersed on the surface of monoclinic β-AgVO3 NRs with diameters ranging from 50 to 105 nm and lengths from 0.3 to 1.3 μm. The NH3 gas sensing properties of Ag/β-AgVO3 NRs were studied under both dry air and humid conditions at room temperature. Comparative analysis demonstrated that the Ag/β-AgVO3 NRs exhibited a strong response to NH3 gas under 70% relative humidity (RH) at room temperature compared to α-AgVO3 NRs. Specifically, the response of the Ag/β-AgVO3 NRs to 5 ppm NH3 increased by 2.25 times as the RH varied from 20% to 80% at room temperature. This enhanced response was attributed to the effects of formation of nanoheterojunctions, nano-metallic Ag activity and the conductivity of NH4+ and OH- ions induced by the presence of humidity. The room temperature NH3 gas sensors based on Ag/β-AgVO3 NRs demonstrated strong responses to low NH3 concentrations, high selectivity, good reproducibility, and long-term stability, and show promise for the development of low-power and cost-effective NH3 gas sensors for practical applications even under high humidity.

Pd Decoration with Synergistic High Oxygen Mobility Boosts Hydrogen Sensing Performance at Low Working Temperature on WO3 Nanosheet

Pd-based materials have received remarkable attention and exhibit excellent H2 sensing performance due to their superior hydrogen storage and catalysis behavior. However, the synergistic effects originated from the decoration of Pd on a metal oxide support to boost the sensing performance are ambiguous, and the deep investigation of metal support interaction (MSI) on the H2 sensing mechanism is still unclear. Here, the model material of Pd nanoparticle-decorated WO3 nanosheet is synthesized, and individual fine structures can be achieved by treating it at different temperatures. Notably, the Pd-WO3-300 materials display superior H2 sensing performance at a low working temperature (110 °C), with a superior sensing response (Ra/Rg = 40.63 to 10 ppm), high sensing selectivity, and anti-interference ability. DFT calculations and detailed structural investigations confirm that the moderate MSI facilitates the generation of high mobility surface O2- (ad) species and a proper ratio of surface Pd0-Pd2+ species, which can significantly boost the desorption of intermediate PdHx species at low temperatures and contribute to enhanced sensing performance. Our work illustrates the effect of MSI on sensing performance and provides insight into the design of advanced sensing materials.

Wearable Gas Sensor Based on Reticular Antimony-Doped SnO2/PANI Nanocomposite Realizing Intelligent Detection of Ammonia within a Wide Range of Humidity

Wearable gas sensors demonstrate broad potential for environmental monitoring and breath analysis applications. Typically, they require a highly stable and high-performance flexible gas sensing unit that can work with a small, flexible circuit to enable real-time accurate concentration analysis and prediction. This work proposes a flexible gas sensor using antimony-doped tin dioxide composite polyaniline as the sensing material for room-temperature ammonia detection over a wide humidity range. The sensor exhibits high sensitivity (response value at 33.1 toward 100 ppm ammonia at 70% relative humidity), excellent selectivity, and good long-term and mechanical stability. The increased sensitivity is due to a reduction in the hole concentration of polyaniline in air, achieved through compositing and doping. Subsequently, regression analysis equations are developed to establish the relationship between the gas concentration and sensor response under varying environmental humidity conditions. The sensor was integrated with a small, low-power circuit module to form a wearable smart bracelet with signal acquisition, processing, and wireless transmission functions, which could achieve early and remote warning of gas leakage in different humidity environments. This research demonstrates a promising approach to designing high-performance, high-stability, and flexible gas sensors and their corresponding wireless sensing systems.

Highly sensitive Cu-ethylenediamine/PANI composite sensor for NH3 detection at room temperature

Ammonia detection is needed in several sectors including environmental monitoring, automobile industry, and in medical diagnosis. Conducting polymers, such as polyaniline (PANI), have been utilized to develop NH₃ sensors operating at room temperature. However, the performance of these sensors in terms of sensitivity and selectivity need improvement. Functionalization of conducting PANI with metal nanocomposites have shown improved sensor performance. In this work, we report a highly sensitive copper-based nanocomposite for NH₃ detection. The novelty lies in utilization of copper-ethylenediamine (Cu-en) nanocomposite functionalized over PANI for gas sensing. Resistance of the 20 wt% Cu-en with PANI increased 3.8 times upon exposure to 100 ppm of NH₃. The nanocomposite sensor detected NH₃ concentrations as low as 2 ppm. Further, the sensing mechanism was studied by in-situ IV characteristics and impedance spectroscopy during NH₃ exposure. NH₃ showed ionic interaction with PANI, and Cu²⁺. The strong affinity of Cu²⁺ for the lone pair of NH₃ enhanced the sensor response from 0.78 to 3.8 for 100 ppm of NH₃ at 20 °C. The sensor response was completely recovered after heating at 75 °C, which indicates reusability of the sensor. The sensor showed selectivity for NH₃ over ethanol and H₂S. The response was reasonably stable after bending the flexible sensor for 1000 times at a radius of 5 mm.

Hierarchical Flower-like WO3 Nanospheres Decorated with Bimetallic Au and Pd for Highly Sensitive and Selective Detection of 3-Hydroxy-2-butanone Biomarker

Listeria monocytogenes, which is abundant in environment, can lead to many kinds of serious illnesses and even death. Nowadays, indirectly detecting the metabolite biomarker of L. monocytogenes, 3-hydroxy-2-butanone, has been verified to be an effective way to evaluate the contamination of L. monocytogenes. However, this detection approach is still limited by sensitivity, selectivity, and ppb-level detection limit. Herein, low-cost and highly sensitive and selective 3-hydroxy-2-butanone sensors have been proposed based on the bimetallic AuPd decorated hierarchical flower-like WO₃ nanospheres. Notably, the 1.0 wt % AuPd-WO₃ based sensors displayed the highest sensitivity (R_a/R_g = 84 @ 1 ppm) at 250 °C. In addition, the sensors showed outstanding selectivity, rapid response/recovery (8/4 s @ 10 ppm), and low detection limit (100 ppb). Furthermore, the evaluation of L. monocytogenes with high sensitivity and specificity has been achieved using 1.0 wt % AuPd-WO₃ based sensors. Such a marvelous sensing performance benefits from the synergistic effect of bimetallic AuPd nanoparticles, which lead to thicker electron depletion layer and increased adsorbed oxygen species. Meanwhile, the unique hierarchical nanostructure of the flower-like WO₃ nanospheres benefits the gas-sensing performance. The AuPd-WO₃ nanosphere-based sensors exhibit a particular and highly selective method to detect 3-hydroxy-2-butanone, foreseeing a feasible route for the rapid and nondestructive evaluation of foodborne pathogens.

pH-Responsive Liquid Marbles Based on Dihydroxystearic Acid

Herein, we report pH-responsive liquid marbles stabilized by 9,10-dihydroxystearic acid (DHSA). The particle morphology and the pH-responsive behavior of the liquid marbles were investigated. The rolling time during the preparation of liquid marbles has a great influence on the thickness of powder adsorption and the stability of the marbles. Compared with the liquid marbles stabilized by other fatty acids (e.g., stearic acid and docosoic acid), the liquid marbles prepared by DHSA have a much higher mechanical robustness. The increase in the number of hydroxyl groups on the carbon chain of fatty acids improves the mechanical robustness of the liquid marbles. Such liquid marbles immediately disintegrated on the surface of an alkaline solution or after exposure to NH₃ gas, which extends their applications in the NH₃ sensor and chemical reactions.

NiWO4 Microflowers on Multi-Walled Carbon Nanotubes for High-Performance NH3 Detection

NiWO4 microflowers with a large surface area up to 79.77 m2·g-1 are synthesized in situ via a facile coprecipitation method. The NiWO4 microflowers are further decorated with multi-walled carbon nanotubes (MWCNTs) and assembled to form composites for NH3 detection. The as-fabricated composite exhibits an excellent NH3 sensing response/recovery time (53 s/177 s) at a temperature of 460 °C, which is a 10-fold enhancement compared to that of pristine NiWO4. It also demonstrates a low detection limit of 50 ppm; the improved sensing performance is attributed to the porous structure of the material, the large specific surface area, and the p-n heterojunction formed between the MWNTs and NiWO4. The gas sensitivity of the sensor based on daisy-like NiWO4/MWCNTs shows that the sensor based on 10 mol % (MWN10) has the best gas sensitivity, with a sensitivity of 13.07 to 50 ppm NH3 at room temperature and a detection lower limit of 20 ppm. NH3, CO2, NO2, SO2, CO, and CH4 are used as typical target gases to construct the NiWO4/MWCNTs gas-sensitive material and study the research method combining density functional theory calculations and experiments. By calculating the morphology and structure of the gas-sensitive material NiWO4(110), the MWCNT load samples, the vacancy defects, and the influence law and internal mechanism of gas sensitivity were described.

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

Toxic gas monitoring at room temperature (RT) is of great concern to public health and safety, where ultrathin silicon nanowires (SiNWs), with diameter <80 nm, are ideal one-dimensional candidates to achieve high-performance field-effect sensing. However, a precise integration of the tiny SiNWs as active gas sensor channels has not been possible except for the use of expensive and inefficient electron beam lithography and etching. In this work, we demonstrate an integratable fabrication of field-effect sensors based on orderly SiNW arrays, produced via step-guided in-plane solid-liquid-solid growth. The back-gated SiNW sensors can be tuned into suitable subthreshold detection regime to achieve an outstanding field-effect sensitivity (75.8% @ 100 ppm NH₃), low detection limit (100 ppb), and excellent selectivity to NH₃ gas at RT, with fast response/recovery time scales (T_res/T_rec) of 20 s (at 100 ppb NH₃) and excellent repeatability and high stability over 180 days. These outstanding sensing performances can be attributed to the fast charge transfer between adsorbed NH₃ molecules and the exposed SiNW channels, indicating a convenient strategy to fabricate and deploy high-performance gas detectors that are widely needed in the booming marketplace of wearable or portable electronics.

CsPbI3NC-Sensitized SnO2/Multiple-Walled Carbon Nanotube Self-Assembled Nanomaterials with Highly Selective and Sensitive NH3 Sensing Performance at Room Temperature

It is an effective strategy to enhance the sensitivity of semiconductor metal oxides (SMOs) being sensitized with CsPbI₃ nanocrystals (NCs) by adjusting the heterostructure between CsPbI₃NC and SMO nanomaterials. In this work, for the first time, a porous 3D multiple-walled carbon nanotube (MWCNT) network uniformly coated with SnO₂ quantum nanoparticles (QNPs) and CsPbI₃ nanocrystals were prepared via a simple solvent vapor-induced self-assembly method. The fabricated CsPbI₃NC-SnO₂QNP/MWCNT nanocomposite with vapor-induced self-assembly exhibits superior stability against the moisture as well as an excellent sensing response. The results imply that the rational design of the metal halide perovskite NC/SMO heterostructure can not only improve the stability but also meet the requirements of sensing application. The self-assembled SnO₂QNP/MWCNT can facilitate the dispersion of small-sized nanoparticles and efficaciously prevent the detachment of CsPbI₃NC. Compared with pristine SnO₂QNP and SnO₂/MWCNT sensors, the CsPbI₃NC-modified SnO₂QNP/MWCNT nanostructure exhibited a remarkable sensitivity of 39.2 for 0.2 ppm NH₃, rapid response/recovery time of 17/18 s, and excellent selectivity towards NH₃. In particular, we applied machine learning methods, including principal component analysis (PCA) and support vector machines (SVMs), to analyze the sensing performance of the CsPbI₃NC-SnO₂QNP/MWCNT sensor and found that the combined effects of CsPbI₃NC-SnO₂QNP/MWCNT heterointerfaces contributed to the improvement of selectivity of sensors. The excellent NH₃ for sub-ppm level concentration is ascribed to the high sensing activity of the CsPbI₃ NC-based heterojunction. This work may not only enrich the family of high-performance breath detection materials but also provide a good example for designing reasonable composite materials with specific properties in the field of metal halide perovskite/SMO heterojunctions.