Nanoconfined Electrochemical Sensing of Single Silver Nanoparticles with a Wireless Nanopore Electrode

Fuelling electrocatalysis at a single nanoparticle by ion flow in a nanoconfined electrolyte layer

We explore the possibility of coupling the transport of ions and water in a nanochannel with the chemical transformation of a reactant at an individual catalytic nanoparticle (NP). Such configuration could be interesting for constructing artificial photosynthesis devices coupling the asymmetric production of ions at the catalytic NP, with the ion selectivity of the nanochannels acting as ion pumps. Herein we propose to observe how such ion pumping can be coupled to an electrochemical reaction operated at the level of an individual electrocatalytic Pt NP. This is achieved by confining a (reservoir) droplet of electrolyte to within a few micrometres away from an electrocatalytic Pt NP on an electrode. While the region of the electrode confined by the reservoir and the NP are cathodically polarised, operando optical microscopy reveals the growth of an electrolyte nanodroplet on top of the NP. This suggests that the electrocatalysis of the oxygen reduction reaction operates at the NP and that an electrolyte nanochannel is formed - acting as an ion pump - between the reservoir and the NP. We have described here the optically imaged phenomena and their relevance to the characterization of the electrolyte nanochannel linking the NPs to the electrolyte microreservoir. Additionally, we have addressed the capacity of the nanochannel to transport ions and solvent flow to the NP.

Ultrafast Subcellular Biolabeling and Bioresponsive Real-Time Monitoring for Targeting Cancer Theranostics

Cell heterogeneity poses a formidable challenge for tumor theranostics, requiring high-resolution strategies for intercellular bioanalysis between single cells. Nanoelectrode-based electrochemical analysis has attracted much attention due to its advantages of label-free characteristics, relatively low cost, and ultra-high resolution for single-cell analysis. Here, we have designed and developed a subcellular biolabeling and bioresponsive real-time monitoring strategy for precise bioimaging-guided cancer diagnosis and theranostics. Our observations revealed the apparent intracellular migration of biosynthetic Au nanoclusters (Au NCs) at different subcellular locations, i.e., from the mitochondria to the mitochondrion-free region in the cytoplasm, which may be helpful for controlling over the biosynthesis of Au NCs. Considering the precise biolabeling advantage of the intracellular biosynthetic Au NCs for biomedical imaging of cancers, it is important to realize the biosynthetic Au NC-enabled precise control in real-time theranostics of cancer cells. Therefore, this work raises the possibility to achieve subcellular monitoring of H2O2 for targeting cancer theranostics, thereby providing a new way to explore the underlying mechanism and imaging-guided tumor theranostics.

Mass Transport and Electron Transfer at the Electrochemical-Confined Interface

Single entity measurements based on the stochastic collision electrochemistry provide a promising and versatile means to study single molecules, single particles, single droplets, etc. Conceptually, mass transport and electron transfer are the two main processes at the electrochemically confined interface that underpin the most transient electrochemical responses resulting from the stochastic and discrete behaviors of single entities at the microscopic scale. This perspective demonstrates how to achieve controllable stochastic collision electrochemistry by effectively altering the two processes. Future challenges and opportunities for stochastic collision electrochemistry are also highlighted.

Monitoring Bipolar Electrochemistry and Hydrogen Evolution Reaction of a Single Gold Microparticle under Sub-Micropipette Confinement

Herein, an approach to track the process of autorepeating bipolar reactions and hydrogen evolution reaction (HER) on a micro gold bipolar electrode (BPE) is established. Once blocking the channel of the sub-micropipette tip, the formed gold microparticle is polarized into the wireless BPE, which induces the dissolution of the gold at the anode and the HER at the cathode. The current response shows a periodic behavior with three regions: the bubble generation region (I), the bubble rupture/generation region (II), and the channel opening region (III). After a stable low baseline current of region I, a series of positive spike signals caused by single H2 nanobubbles rupture/generation are recorded standing for the beginning of region II. Meanwhile, the dissolution of the gold blocking at the orifice will create a new channel, increasing the baseline current for region III, where the synthesis of gold occurs again, resulting in another periodic response. Finite element simulations are applied to unveil the mechanism thermodynamically. In addition, the integral charge of the H2 nanobubbles in region II corresponds to the consumption of the anode gold. It simultaneously monitors autorepeating bipolar reactions of a single gold microparticle and HER of a single H2 nanobubble electrochemically, which reveals an insightful physicochemical mechanism in nanoscale confinement and makes the glass nanopore an ideal candidate to further reveal the heterogeneity of catalytic capability at the single particle level.

In Situ Characterization of Oxygen Evolution Electrocatalysis of Silver Salt Oxide on a Wireless Nanopore Electrode

Silver salt oxide shows superior oxidation ability for the applications of superconductivity, sterilization, and catalysis. However, due to the easy decomposition, the catalytic properties of silver salt oxide are difficult to characterize by conventional methods. Herein, we used a closed-type wireless nanopore electrode (CWNE) to in situ and real-time monitor the electrocatalytic performance of Ag₇NO₁₁ in the oxygen evolution reaction. The real-time current recording revealed that the deposited Ag₇NO₁₁ on the CWNE tip greatly enhanced the oxidative capacity of the electrode, resulting in water splitting. The statistical event analysis reveals the periodic O₂ bubble formation and dissolution at the Ag₇NO₁₁ interface, which ensures the characterization of the oxygen evolution electrocatalytic process at the nanoscale. The calculated k_cat and Markov chain modeling suggest the anisotropy of Ag₇NO₁₁ at a low voltage may lead to multiple catalytic rates. Therefore, our results demonstrate the powerful capability of CWNE in direct and in situ characterization of gas-liquid-solid catalytic reactions for unstable catalysts.

A bio-analytic nanoplatform based on Au post-functionalized CeFeO3 for the simultaneous determination of melatonin and ascorbic acid through photo-assisted electrochemical technology

Both melatonin and ascorbic acid could perform an irreplaceable role in maintaining the ecological balance of the human body and fighting cardiovascular diseases. Herein, a dual-channel photo-assisted electrochemical sensor has been fabricated based on Au post-functionalized CeFeO₃ nanospheres to simultaneously monitor melatonin and ascorbic acid for the first time. Briefly, CeFeO₃ nanospheres are prepared through a hydrothermal and annealing process, and then the reduced Au nanoclusters are anchored on the surface of spheres to afford the CeFeO₃@Au bi-nanospherical sensing probe. Impressively, the pre-fabricated sensor can produce a current signal 11% higher under light than that produced in a dark environment during the electrochemical measurements. Subsequently, the sensor fabricated by our strategy has achieved the simultaneous determination of melatonin and ascorbic acid with the wide detecting ranges of 1 nM-5 μM and 1 nM to 2 μM, and low detection limits of 0.8 nM and 0.4 nM by electrochemical measurements with the presence of the sunlight, and has shown satisfactory recoveries in the real sample measurements, demonstrating that the CeFeO₃@Au bi-nanospherical sensing probe will be an auspicious candidate of advanced electrode material in photo-assisted electrochemical sensing applications.

Electrospray deposition for single nanoparticle studies

Single entity electrochemical (SEE) studies that can probe activities and heterogeneity in activities at nanoscale require samples that contain single and isolated particles. Single, isolated nanoparticles are achieved here with electrospray deposition of colloidal nanoparticle solutions, with simple instrumentation. Role of three electrospray (ES) parameters, viz. spray distance (emitter tip-to-substrate distance), ES current and emitter tip diameter, in the ES deposition of single Au nano-octahedra (Au ODs) is examined. The ES deposition of single, isolated Au ODs are analyzed in terms of percentage of single NPs and local surface density of deposition. The local surface density of ES deposition of single Au ODs was found to increase with decrease in spray distance and emitter tip diameter, and increase in ES current. While the percentage of single particle ES deposition increased with increase in spray distance and decrease in emitter tip size. No significant change in the single Au ODs ES deposition percentage was observed with change in ES current values included in this study. The most favourable conditions in the ES deposition of Au ODs in this study resulted in the local surface density of 0.26 ± 0.05 single particles per μm² and observation of 96.3% single Au OD deposition.

Confined Synthesis of Silver Wire at the Nanopipette-Liquid/Liquid Interface

Herein, silver wire is synthesized electrochemically within a nanopipette using the nanopipette-liquid/liquid interface. The i-t curve characterizes the growth state of the silver wire. The higher rate of current increase indicates the faster electron transfer and the faster growth of the silver wire; conversely, when the current does not increase significantly with time, i.e., the rate of increase of the current is small, the growth rate of the silver wire is slow. The main driving force for the growth of silver into a linear structure is the theoretical current differential between the water and oil, caused by the concentration difference between the silver nitrate and ferrocene. The growth of the silver wire is also influenced by the shape of the nanopipette. If the diameter of the pipet increases quickly, silver wire tends to produce multibranched structures, while a smaller diameter makes it easier to obtain silver wire with fewer branches due to the confinement effect. This method is also applicable to the synthesis of gold within a nanopipette. The combination of nanopipette and metallic material using a liquid-liquid interface results in a broader application of nanopipettes for nanopore sensors, nanopore electrodes, bipolar electrodes, etc.

Nanopore Stochastic Sensing Based on Non-covalent Interactions

A variety of species could be detected by using nanopores engineered with various recognition sites based upon non-covalent interactions, including electrostatic, aromatic, and hydrophobic interactions. The existence of these engineered non-covalent bonding sites was supported by the single-channel recording technique. The advantage of the non-covalent interaction-based sensing strategy was that the recognition site of the engineered nanopore was not specific for a particular molecule but instead selective for a class of species (e.g., cationic, anionic, aromatic, and hydrophobic). Since different species produce current modulations with quite different signatures represented by amplitude, residence time, and even characteristic voltage-dependence curve, the non-covalent interaction-based nanopore sensor could not only differentiate individual molecules in the same category but also enable differentiation between species with similar structures or molecular weights. Hence, our developed non-covalent interaction-based nanopore sensing strategy may find useful application in the detection of molecules of medical and/or environmental importance.

Direct Observation of Amide Bond Formation in a Plasmonic Nanocavity Triggered by Single Nanoparticle Collisions

The real-time observation of chemical bond formation at the single-molecule level is one of the great challenges in the fields of organic and biomolecular chemistry. Valuable information can be gleaned that is not accessible using ensemble-average measurements. Although remarkably sophisticated techniques for monitoring chemical reactions have been developed, the ability to detect the specific formation of a chemical bond in situ at the single-molecule level has remained an elusive goal. Amide bonds are routinely formed from the aminolysis of N-hydroxysuccinimide (NHS) esters by primary amines, and the protocol is widely used for the synthesis, cross-linking, and labeling of peptides and proteins. Herein, a plasmonic nanocavity was applied to study aminolysis reaction for amide bond formation, which was initiated by single nanoparticle collision events between suitably functionalized free-moving gold nanoparticles and a gold nanoelectrode in an aqueous buffer. By means of simultaneous surface enhanced Raman spectroscopy (SERS) and single-entity electrochemistry (EC) measurements, we have probed the dynamic evolution of amide bond formation in the aminolysis reaction with 10 s of millisecond time resolution. Hence, we demonstrate that single-entity EC-SERS is a valuable and sensitive technique by which chemical reactions can be studied at the single-molecule level.

Electrochemical Collision of Single Silver Nanoparticles in Carbon Nanopipettes

Exploring the electrochemical collision features at nanoelectrodes is highly desirable for revealing new physical insights and further expanding its applications at smaller spaces. Herein, we study the collision processes of single silver nanoparticles (AgNPs) inside carbon nanopipettes (CNPs). Results show that AgNPs undergo multiple collision and oxidation processes prior to fully oxidation after entering into the CNPs. Different from the disk electrodes, the produced Ag⁺ cannot immediately diffuse away from the cavity and will be reduced once switching to reductive potentials. More intriguingly, we observe discrete cathodic spikes from the Ag⁺ reduction, which are presumably due to the negatively charged carbon surface confined in the CNPs. The elucidated collision features in a CNP would enable its better usage for single entity measurements at confined spaces.