Wearable Motion Smartsensors Self-Powered by Core-Shell Au@Pt Methanol Fuel Cells

An intelligent humidity sensing system for human behavior recognition

An intelligent humidity sensing system has been developed for real-time monitoring of human behaviors through respiration detection. The key component of this system is a humidity sensor that integrates a thermistor and a micro-heater. This sensor employs porous nanoforests as its sensing material, achieving a sensitivity of 0.56 pF/%RH within a range of 60-90% RH, along with excellent long-term stability and superior gas selectivity. The micro-heater in the device provides a high operating temperature, enhancing sensitivity by 5.8 times. This significant improvement enables the capture of weak humidity variations in exhaled gases, while the thermistor continuously monitors the sensor's temperature during use and provides crucial temperature information related to respiration. With the assistance of a machine learning algorithm, a behavior recognition system based on the humidity sensor has been constructed, enabling behavior states to be classified and identified with an accuracy of up to 96.2%. This simple yet intelligent method holds great potential for widespread applications in medical assistance analysis and daily health monitoring.

Nanogenerators for gas sensing applications

Gas sensors are now widely employed in many industries due to the rapid speed of industrialization and the growth of the Internet of Things. However, the wearability and mobility of traditional gas sensors are limited by their high reliance on external power sources. Nanogenerators (NGs) can compensate for their power source limitations when paired with gas sensors by transforming the environment's widely dispersed low-frequency energy into electrical energy, allowing for self-powered gas detection. The paper thoroughly examines the advancements made in the field of NG-based self-powered gas sensor research in recent years. A systematic description is given of the two main types of NG-based self-powered gas sensors. Lastly, the evolution of sensor use in a few typical gas sensing applications is highlighted, and the field's future development trend is anticipated.

Flexible epidermal wearable sensor for Athlete's sweat biomarkers monitoring

Wearable sweat sensors hold great promise for the monitoring of athletic sweat biomarkers that are reflective of physical status and the inimitable feature of wearable sensors to conduct dynamic sweat analysis in situ. However, the preparative methods of wearable patches for monitoring athlete's biomarkers are often complicated. Here, we demonstrate the first example of "sports lab-on-skin" as a fully integrated epidermal sweat sensor through simple laser engraving and laser cutting methods, which enables on-body and wirelessly measuring sweat Na+, sweat K+, sweat lactate, and initial sweat rate for physical status assessment. We test the performance of the "sports lab-on-skin" in both physically trained and un-trained groups under the same exercise intensity. We also validate the influence of different scenarios (water intake, breakfast, and exercise intensity) on dehydration time, sweat K+ level, sweat lactate level, and initial sweat rate.

Ambient energy harvesters in wearable electronics: fundamentals, methodologies, and applications

In recent years, wearable sensor devices with exceptional portability and the ability to continuously monitor physiological signals in real time have played increasingly prominent roles in the fields of disease diagnosis and health management. This transformation has been largely facilitated by materials science and micro/nano-processing technologies. However, as this technology continues to evolve, the demand for multifunctionality and flexibility in wearable devices has become increasingly urgent, thereby highlighting the problem of stable and sustainable miniaturized power supplies. Here, we comprehensively review the current mainstream energy technologies for powering wearable sensors, including batteries, supercapacitors, solar cells, biofuel cells, thermoelectric generators, radio frequency energy harvesters, and kinetic energy harvesters, as well as hybrid power systems that integrate multiple energy conversion modes. In addition, we consider the energy conversion mechanisms, fundamental characteristics, and typical application cases of these energy sources across various fields. In particular, we focus on the crucial roles of different materials, such as nanomaterials and nano-processing techniques, for enhancing the performance of devices. Finally, the challenges that affect power supplies for wearable electronic products and their future developmental trends are discussed in order to provide valuable references and insights for researchers in related fields.

Electrocatalytic Oxidation of Methanol and Ethanol with 3d-Metal Based Anodic Electrocatalysts in Alkaline Media Using Carbon Based Electrode Assembly

Homogeneous electrocatalytic systems based on readily available, earth-abundant, inexpensive base metals Ni, Co, and Cr have been formulated for the electro-oxidation of alcohols (methanol and ethanol) that constitute a key half-cell component of direct alcohol fuel cells (DAFCs). Notably, excellent results were obtained for both methanol as well as ethanol electro-oxidation while operating with a half-cell assembly based on all-non-noble working and counter electrode systems consisting of glassy carbon and graphite rod, respectively. Using NaOH as the supporting electrolyte, Ni/Co/Cr metal salts and their bis(iminopyridine) complexes have been used as anodic electrocatalysts for the alcohol half-cell reactions, and among them, catalytic systems based on Co outperformed the corresponding systems based on Ni and Cr. The system comprising CoCl2.·6H2O [10 mM] + NaOH [6 M] at room temperature emerged as the best electrocatalyst for both methanol [5 M] electro-oxidation (ca. 522.5 ± 13.5 mA cm-2 at 1.4 V) and ethanol [5 M] electro-oxidation (ca. 209 ± 25 mA cm-2 at 1.34 V). It was observed that regardless of the starting alcohol, the end product is carbon dioxide, all of which gets trapped as sodium carbonate (up to 97% yield), thereby mitigating any possible hazards of greenhouse gas emission. Inferences obtained from FETEM, FESEM, and EDS analysis of both the electrolyte solution and residues deposited on the electrode surface provide evidence for the mostly homogeneous nature of the reaction mixture with the molecular catalyst being the major contributor toward the electrocatalytic activity apart from the minor role played by trace heterogeneous particles. The current cell assembly operating with non-noble working and counter electrodes utilizing a catalytic system based on an earth-abundant, base metal salt/complex that not only results in good half-cell current densities for high-energy power-source DAFCs but also generates high-value sodium carbonate offers an exciting avenue.

An ultra-thin flexible wearable sensor with multi-response capability prepared from ZIF-67 and conductive metal-organic framework composites for health signal monitoring

Simulation of somatosensory systems in human skin with electronic devices has broad applications in the development of intelligent robots and wearable electronic devices. Here, we give an account of a new biomimetic flexible dual-mode pressure sensor, which is based on the first developed sea dandelion-like conductive metal-organic framework (cZIF-67@Cu-CAT) and the self-synthesized mechanically luminescent zinc sulfide nanoparticles and cleverly combines the microdome structure of the lotus leaf. According to finite element simulation analysis (FEA), the deformation behavior and pressure distribution of the contact interface with dandelion-like nanostructures cause the contact area of the sensor to increase rapidly and steadily with the load. It is for this reason that the piezoresistive pressure sensor has a high sensitivity of 71.74 kPa^-1 over a wide range of 0.5 to 80 kPa. More importantly, it can roughly perceive stress changes in the external environment through mechanoluminescence materials without a power supply. The ultra-thin flexible pressure sensor is suitable for sensitive monitoring of small vibrations, including wrist pulse and joint motion. Combined with Bluetooth data transmission, it is not difficult to see that the high-sensitivity ultra-thin sensor designed in this study has broad potential in the applications of bio-wearable electronics and will play an immeasurable role in various sports training and joint protection in the future.