Voltammetric Selectivity in Detection of Ionized Perfluoroalkyl Substances at Micro-Interfaces between Immiscible Electrolyte Solutions

Electrochemical detection of per- and polyfluoroalkyl substances: A review

Per- and poly-fluoroalkyl substances (PFASs) are recognised for their environmental persistence and bioaccumulation, necessitating a dependable detection technology. Traditional methods examine multiple facets. Electrochemical sensors represent a preferable alternative due to their reliability, real-time detection capabilities, and potential for on-site analysis. Metal-organic frameworks (MOFs) and molecularly imprinted polymers (MIPs) exhibit remarkable properties in analysis, including high sensitivity and selectivity, rapid response and efficient electron transfer capabilities. Nonetheless, the stability of MOFs occasionally poses issues in aquatic conditions. Utilising a microfluidic channel between interdigitated microelectrodes (IDμE) in a MOF-based electrochemical sensor for PFASa detection offers numerous advantages. It possesses a minimal limit of detection (LOD), comparable to cutting-edge ex-situ methodologies. The molecular interactions of the capture probes provide effective electrochemical transduction, while the nanoporous morphology of the materials and IDμE significantly enhance the signal-to-noise ratio. Extended diffusion durations impede detection abilities and limit molecular interactions between PFAS and electrode surfaces. The selectivity challenges involve differentiation problems and complex matrices. Accurately identifying PFAS compounds in samples is problematic, especially those with similar carbon chain lengths, and existing sensors are hindered by interference from non-fluorinated surfactants. Improvements in electrode design can be realised by the use of nonplanar interdigitated microelectrode arrays (NP-IDμE), the application of nanoporous and capacitive electrode technologies, and the incorporation of electrode nano-porosity to minimise non-specific adsorption. Improvements in signal and sensitivity can optimise the detection process. Signal increases can be attained by decoupling sensitivity and selectivity using force as a tuning parameter, employing ambient oxygen as a mediator molecule instead of expensive ferrocene, and utilising electrochemical impedance spectroscopy (EIS) for improved sensitivity. Integrating IoT with EC PFAS sensors indicates a promising future for environmental monitoring.

Rapid Detection of Perfluorodecanoic Acid and Perfluorooctanesulfonic Acid in Foods Using a Molecularly Imprinted Poly(o-phenylenediamine)/Modified Glassy Carbon Electrode

In the current work, a modified glassy carbon electrode (GCE) with excellent conductivity was prepared by drop-coating carboxymethyl cellulose (CMC) and multiwalled carbon nanotubes (MWCNTs) on the GCE surface. On this basis, two highly selective molecularly imprinted sensors (MIP@PFDA/modified GCE and MIP@PFOS/modified GCE) were separately obtained by in situ electropolymerization of o-phenylenediamine (o-PD) with perfluorodecanoic acid (PFDA) and perfluorooctanesulfonic acid (PFOS) as templates. Under optimal conditions, sensitive quantification methods in the linearity ranges 0.1-1000 ng/mL (PFDA) and 0.05-900 ng/mL (PFOS) were developed via differential pulse voltammetry using [Fe(CN)6]3-/4- as a redox probe. The detection limit values of PFDA and PFOS were as low as 0.041 and 0.015 ng/mL, respectively. Both sensors also presented great stability and selectivity in coexistence with other interferences. Lastly, three food samples were utilized to verify the validity and applicability with recoveries of 89.97%-112.27%, confirming its potential for per- and polyfluoroalkyl substances (PFASs) monitoring in a complex matrix.

Bioaccumulation mechanisms of perfluoroalkyl substances (PFASs) in aquatic environments: Theoretical and experimental insights

Per- and polyfluoroalkyl substances (PFASs) are persistent, bioaccumulative contaminants found in water resources at levels hazardous to human health. However, the PFAS bioaccumulation mechanism remains poorly understood. In this study, we incorporated density functional theory (DFT), molecular dynamics (MD), and experiments to analyze the partitioning pathways and to establish the structure-bioaccumulation relationship. DFT- and MD-calculated environmental fate parameters, comprising LogPO,W, LogPA,W, and diffusion coefficients, coincide with experiments at various ranges of PFAS molecules, with a correction coefficient (R²) of 0.783. MD simulations revealed that medium or long-chain-length PFASs spontaneously aggregate into submicelles in aquatic environments, enhancing their bioaccumulation effect. The short-chain PFASs show weak aggregation, but they also permeate into biological membranes. Particularly, it was discovered that aggregating PFASs "dissolve" into the lipid membrane matrix, owing significantly to van der Waals interactions rather than electrostatic effects. Thermodynamic analysis suggests that PFAS translocation involves spatial flips along the free energy surface. Short-chain PFASs exhibit low steric hindrance, contributing to bioaccumulation-a factor previously neglected in research. PFAS bioaccumulation depends on chain length, as further confirmed by intracellular reactive oxygen species formation and live/dead quantification in HepG2 cells. These insights advance our understanding of PFAS bioaccumulation mechanisms and highlight critical factors influencing their environmental and biological behavior.

Electrochemical behaviour of poly(amidoamine) dendrimers at micropipette-based liquid/liquid micro-interfaces

Dendrimers are macromolecules with well-defined three-dimensional structures, sizes and surface charges. In this work, four generations of poly(amidoamine) (PAMAM) dendrimers were investigated at the micro-interface between two immiscible electrolyte solutions (μITIES) to understand their electrochemical responses as simple models of ionised macromolecules. Cyclic voltammetry (CV) across a range of aqueous phase pH revealed that all four generations (G0-G3) presented diffusion-controlled ion-transfer from aqueous to organic phase, while the reverse transfers from organic to aqueous phase varied with both pH and the dendrimer generation. The larger dendrimers (G2 and G3) show an adsorption behaviour at pH ≤ 3.5, but show a diffusional response at pH ≥ 6. On the other hand, the smaller dendrimers (G0 and G1) always show a diffusional response and are not impacted by the pH. This indicates that more highly charged dendrimers condense at the interface. The reverse scan of CVs showed that an increased applied potential was required to remove (desorb) these polycations from the interfaces in comparison to smaller, less charged species. Diffusion coefficients (D) were estimated, showing a decrease with increasing generation. Limits of detection for these dendrimers by CV at the μITIES were 0.4, 0.2, 0.7 and 0.5 μM for G0 to G3, respectively, while differential pulse voltammetry lowered the LODs (0.07, 0.05, 0.09 and 0.08 μM, respectively). These study shows that the μITIES provides a simple way to detect and evaluate the electrochemical behaviour of ionised macromolecules, providing a simple illustration of detection mechanism with diffusion or adsorption processes.

An innovative homogeneous electrochemistry coupled with colorimetry dual-model sensing strategy for perfluorooctane sulfonate based on Cu@CuO aerogel nanozyme

By preparing Cu@CuO aerogel as a nanozyme which exhibits prominent peroxidase-like (POD) activity, an innovative homogeneous electrochemistry (HEC) coupled with the colorimetry dual-model sensing strategy is proposed to detect perfluorooctane sulfonate (PFOS) for the first time. Cu@CuO aerogel accelerates the oxidation process of colorless o-phenylenediamine to form yellow 2,3-diaminophenazinc (DAP), and meanwhile, DAP as an electroactive substance creates a reduction peak current upon the electrochemical measurements. Interestingly, in the presence of PFOS, the POD activity of Cu@CuO aerogel is inhibited since the specific coordination between PFOS and Cu(II) can cover the active sites, resulting in the color of the sensing system becoming light and the peak current of DAP decreasing. This innovative dual-mode detection method showed excellent electrochemical detection of PFOS in the concentration range 10.0 ~ 1125.0 nM with a limit of detection (LOD) as low as 3.3 nM and a LOD of 20.8 nM in the colorimetric detection in the range 62.3 ~ 875 nM. Furthermore, the sensor was successfully used for the analysis of real samples with an RSD value  ≤ 6.5%. The successful application of this two-mode sensing method for the determination of PFOS holds promise for the detection of other contaminants in the future.

Dual-mode electrochemical and SERS detection of PFAS using functional porous substrate

Human activity is the cause of the continuous and gradual grooving of environmental contaminants, where some released toxic and dangerous compounds cannot be degraded under natural conditions, resulting in a serious safety issue. Among them are the widely occurring water-soluble perfluoroalkyl and polyfluoroalkyl substances (PFAS), sometimes called "forever chemicals" because of the impossibility of their natural degradation. Hence, a reliable, expressive, and simple method should be developed to monitor and eliminate the risks associated with these compounds. In this study, we propose a simple, express, and portable detection method for water-soluble fluoro-alkyl compounds (PFOA and GenX) using mutually complementary methods: electrochemical impedance spectroscopy (EIS) and surface-enhanced Raman spectroscopy (SERS). To implement our method, we developed special substrates based on porous silicon with a top-deposited plasmon-active Au layer by subsequently grafting -C6H4-NH2 chemical moieties to provide surface affinity toward negatively charged water-soluble PFAS. Subsequent EIS utilization allows us to perform semiquantitative detection of PFOA and GenX up to 10-10 M concentration because surface entrapping of PFAS leads to a significant increase in the electrode-electrolyte charge-transfer resistance. However, distinguishing by EIS whether even PFAS were entrapped was impossible, and thus the substrates were subsequently subjected to SERS measurements (allowed by surface plasmon activity due to the presence of a porous Au layer), clearly indicating the appearance of characteristic C-F vibration bands.

Sensitive Detection of Perfluoroalkyl Substances Using MXene-AgNP-Based Electrochemical Sensors

Per- and polyfluoroalkyl substances (PFAS) pose a significant threat to the environment due to their persistence, ability to bioaccumulate, and harmful effects. Methods to quantify PFAS rapidly and effectively are essential to analyze and track contamination, but measuring PFAS down to the ultralow regulatory levels is extremely challenging. Here, we describe the development of a low-cost sensor that can measure a representative PFAS, perfluorooctanesulfonic acid (PFOS), at the parts per quadrillion (ppq) level within 5 min. The method combines the ability of PFOS to bind to silver nanoparticles (AgNPs) embedded within a fluorine-rich Ti3C2-based multilayered MXene, which provides a large surface area and accessible binding sites for direct impedimetric detection. Fundamentally, we show that MXene-AgNPs are capable of binding PFOS and other long-chain PFAS compounds, though the synergistic action of AgNPs and MXenes via electrostatic and F-F interactions. This binding induced concentration-dependent changes in the charge-transfer resistance, enabling rapid and direct quantification with extremely high sensitivity and no response to interferences. The sensor displayed a linear range from 50 ppq to 1.6 ppt (parts per trillion) with an impressively low limit of detection of 33 ppq and a limit of quantification of 99 ppq, making this sensor a promising candidate for low-cost screening of the PFAS content in water samples, using a simple and inexpensive procedure.

Modulating the ion-transfer electrochemistry of perfluorooctanoate with serum albumin and β-cyclodextrin

Per- and polyfluoroalkyl substances (PFAS) are durable synthetic pollutants that persist in the environment and resist biodegradation. Ion-transfer electrochemistry at aqueous-organic interfaces is a simple strategy for the detection of ionised PFAS. Herein, we investigate the modulation of the ion transfer voltammetry of perfluorooctanoate (PFOA) at liquid-liquid micro-interface arrays by aqueous phase bovine serum albumin (BSA) or β-cyclodextrin (β-CD) and examine the determination of association constants for these binding interactions. By tracking the ion transfer current due to ionised, uncomplexed PFOA as a function of BSA or β-CD concentration, titration curves are produced. Fitting of a binding isotherm to these data provides the association constants. The association constant of PFOA with the BSA determined in this way was ca. 105 M-1 assuming a 1 : 1 binding. Likewise, the association constant for PFOA with β-CD was ca. 104 M-1 for a 1 : 1 β-CD-PFOA complex. Finally, the simultaneous effect of both BSA and β-CD on the ion transfer voltammetry of PFOA was studied, showing clearly that PFOA bound to BSA is released (de-complexed) upon addition of β-CD. The results presented here show ion transfer voltammetry as a simple strategy for the study of molecular and biomolecular binding of ionised PFAS and is potentially useful in understanding the affinity of different PFAS with aqueous phase binding agents such as proteins and carbohydrates.

An Overview on Recent Advances in Biomimetic Sensors for the Detection of Perfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFAS) are a class of materials that have been widely used in the industrial production of a wide range of products. After decades of bioaccumulation in the environment, research has demonstrated that these compounds are toxic and potentially carcinogenic. Therefore, it is essential to map the extent of the problem to be able to remediate it properly in the next few decades. Current state-of-the-art detection platforms, however, are lab based and therefore too expensive and time-consuming for routine screening. Traditional biosensor tests based on, e.g., lateral flow assays may struggle with the low regulatory levels of PFAS (ng/mL), the complexity of environmental matrices and the presence of coexisting chemicals. Therefore, a lot of research effort has been directed towards the development of biomimetic receptors and their implementation into handheld, low-cost sensors. Numerous research groups have developed PFAS sensors based on molecularly imprinted polymers (MIPs), metal-organic frameworks (MOFs) or aptamers. In order to transform these research efforts into tangible devices and implement them into environmental applications, it is necessary to provide an overview of these research efforts. This review aims to provide this overview and critically compare several technologies to each other to provide a recommendation for the direction of future research efforts focused on the development of the next generation of biomimetic PFAS sensors.