Ultrasensitive Flexible Olfactory Receptor-Derived Peptide Sensor for Trimethylamine Detection by the Bending Connection Method

Self-standing perylene diimide covalent organic framework membranes for trace TMA sensing at room temperature

The unprecedented demand for highly selective, real-time monitoring and low-power gas sensors used in food quality control has been driven by the increasing popularity of the Internet of Things (IoT). Herein, the self-standing perylene diimide based covalent organic framework membranes (COFMPDI-THSTZ) were prepared via liquid-liquid interfacial synthesis method. By incorporating the perylene diimide monomer into the COFM through molecular engineering, COFMPDI-THSTZ based sensor demonstrated an outstanding trimethylamine (TMA)-sensing performance at room temperature. Benefited from the TMA-accessible self-standing membrane morphology, π-electron delocalization effect, and extensive surface area with continuous nanochannels, the specific and highly sensitive TMA measurement has been achieved within the range of 0.03-400 ppm, with an exceptional theoretical detection limit as low as 10 ppb. Moreover, the primary internal mechanism of COFMPDI-THSTZ for this efficient TMA detection was investigated through in-situ FT-IR spectra, thereby directly elucidating that the chemisorption interaction of oxygen modulated the depletion layers on sensing material surface, resulting in alterations in sensor resistance upon exposure to the target gas. For practical usage, COFMPDI-THSTZ based sensor exhibited exceptional real-time in-situ sensing capabilities, further confirmed their potential for application in dynamic prediction evaluation of marine fish products and quality monitoring in IoT.

High-Performance Trimethylamine Sensor Based on an Imine Covalent Organic Framework

As trimethylamine (TMA) is widely used in agriculture and industry, inhalation of TMA can cause very serious negative effects on human health. However, most of the current gas sensors for detecting TMA are commonly performed at high temperatures and cannot meet market needs. Inspired by this, we prepared imine covalent organic frameworks (TB-COF) synthesized from two monomers, 1,3,5-tris(4-aminophenyl)benzene (TAPB) and 1,3,5-benzotricarboxaldehyde (BTCA), using acetic acid as a catalyst at room temperature. Based on this, three sensors were prepared for gas sensitivity testing, namely, TA, BT, and TB-COF sensors. The three sensors were tested for 15 different gases at room temperature. From the whole gas sensitivity data, the TB-COF sensor made by compositing TA and BT has a higher sensitivity (6845.9%) to TMA at 500 ppm, which is 6.1 and 5.4 times higher than the response of TA and BT sensors, respectively. The TB-COF sensor adsorbs and desorbs TMA in a controlled 23 s cycle with a low detection limit of 28.6 ppb. This result indicates that TB-COF prepared at room temperature can be used as a gas-sensitive sensing material for real-time monitoring of TMA. The gas sensing results demonstrate the great potential of COFs for sensor development and application and provide ideas for further development of COFs-based gas sensors.

High-performance peptide biosensor based on unified structure of lotus silk

The sensitive materials of current gas sensors are fabricated on planar substrates, significantly limiting the quantity of sensitive material available on the sensor and the complete exposure of the sensitive material to the target gas. In this work, we harnessed the finest, resilient, naturally degradable, and low-cost lotus silk derived from plant fibers, to fabricate a high-performance bio-sensor for toxic and harmful gas detection, employing peptides with full surface connectivity. The proposed approach to fabricate gas sensors eliminated the need for substrates and electrodes. To ascertain the effectiveness and versatility of the sensors created via this method, sensors for three distinct representative gases (isoamyl alcohol, 4-vinylanisole, and benzene) were prepared and characterized. These sensors surpassed reported detection limits by at least one order of magnitude. The inherent pliancy of lotus silk imparts adaptability to the sensor architecture, facilitating the realization of 1D, 2D, or 3D configurations, all while upholding consistent performance characteristics. This innovative sensor paradigm, grounded in lotus silk, represents great potential toward the advancement of highly proficient bio gas sensors and associated applications.

Recent Progress in Wearable Near-Sensor and In-Sensor Intelligent Perception Systems

As the Internet of Things (IoT) becomes more widespread, wearable smart systems will begin to be used in a variety of applications in people's daily lives, not only requiring the devices to have excellent flexibility and biocompatibility, but also taking into account redundant data and communication delays due to the use of a large number of sensors. Fortunately, the emerging paradigms of near-sensor and in-sensor computing, together with the proposal of flexible neuromorphic devices, provides a viable solution for the application of intelligent low-power wearable devices. Therefore, wearable smart systems based on new computing paradigms are of great research value. This review discusses the research status of a flexible five-sense sensing system based on near-sensor and in-sensor architectures, considering material design, structural design and circuit design. Furthermore, we summarize challenging problems that need to be solved and provide an outlook on the potential applications of intelligent wearable devices.

A novel and efficient electrochemiluminescence sensing strategy for the determination of trimethylamine oxide in seafood

A novel and efficient electrochemiluminescence (ECL) sensing strategy and a solid-state ECL sensor was proposed to detect trimethylamine oxide (TMAO), which is widely presented in marine species and has important physiological functions. TMAO was reduced by Fe(II)-EDTA complex to trimethylamine, acting as coreactant, to amplify the ECL response of the Ru (bpy)32+ system. To improve the detection sensitivity and efficiency, a robust solid-state ECL probe was prepared and a flow injection ECL detection system was established with a specially designed flow ECL unit, under the excitation of stepping pulse potentials. Under optimized experimental conditions, the developed ECL sensor worked well for TMAO detection in a wide linear range of 10.00 μM to 1.00 mM with a limit of detection of 3.41 μM. It was successfully applied to determine TMAO in various species of seafood samples. This work provides a promising strategy for TMAO detection.

Biomimetic Wearable Sensors: Emerging Combination of Intelligence and Electronics

Owing to the advancement of interdisciplinary concepts, for example, wearable electronics, bioelectronics, and intelligent sensing, during the microelectronics industrial revolution, nowadays, extensively mature wearable sensing devices have become new favorites in the noninvasive human healthcare industry. The combination of wearable sensing devices with bionics is driving frontier developments in various fields, such as personalized medical monitoring and flexible electronics, due to the superior biocompatibilities and diverse sensing mechanisms. It is noticed that the integration of desired functions into wearable device materials can be realized by grafting biomimetic intelligence. Therefore, herein, the mechanism by which biomimetic materials satisfy and further enhance system functionality is reviewed. Next, wearable artificial sensory systems that integrate biomimetic sensing into portable sensing devices are introduced, which have received significant attention from the industry owing to their novel sensing approaches and portabilities. To address the limitations encountered by important signal and data units in biomimetic wearable sensing systems, two paths forward are identified and current challenges and opportunities are presented in this field. In summary, this review provides a further comprehensive understanding of the development of biomimetic wearable sensing devices from both breadth and depth perspectives, offering valuable guidance for future research and application expansion of these devices.

Investigating on sensing mechanism of MoS2-FET biosensors in response to proteins

Field-effect transistor (FET) biosensors based on two-dimensional materials have gained extensive attention due to their high sensitivity, label-free detection capability, and fast response. Molybdenum disulfide (MoS2), with tunable bandgap, high surface-to-volume ratio, and smooth surface without dangling bonds, is a promising material for FET biosensors. Previous reports have demonstrated the fabrication of MoS2-FET biosensors and their high sensitivity detection of proteins. However, most prior research has focused on the realization of MoS2-FETs for detecting different kinds of proteins or molecules, while comprehensive analysis of the sensing mechanism and dominant device factors of MoS2-FETs in response to proteins is yet to investigate. In this study, we first fabricated MoS2-FET biosensor and detected different types of proteins (immunoglobulin G (IgG),β-actin, and prostate-specific antigen (PSA)). Secondly, we built the model of the device and analyzed the sensing mechanism of MoS2-FETs in response to proteins. Experimental and modeling results showed that the induced doping effect and gating effect caused by the target protein binding to the device surface were the major influential factors. Specifically, the channel doping concentration and gate voltage (Vg) offset exhibited monotonic change as the concentration of the protein solution increases. For example, the channel doping concentration increased up to ∼37.9% and theVgoffset was ∼-1.3 V with 10-7μgμl-1IgG. The change was less affected by the device size. We also investigated the effects of proteins with opposite acid-base properties (β-actin and PSA) to IgG on the device sensing mechanism.β-actin and PSA exhibited behavior opposite to that of IgG. Additionally, we studied the response behavior of MoS2-FETs with different dimensions and dielectric materials (channel length, MoS2thickness, dielectric layer thickness, dielectric layer material) to proteins. The underlying mechanisms were discussed in details. This study provides valuable guidelines for the design and application of MoS2-FET biosensors.

Sex Pheromone Receptor-Derived Peptide Biosensor for Efficient Monitoring of the Cotton Bollworm Helicoverpa armigera

The cotton bollworm, Helicoverpa armigera (H. armigera), causes damage to a wide range of cultivated crops and is one of the pests with the greatest economic importance for global agriculture. Currently, the detection of H. armigera is based on manual sampling. A low limit of detection (LOD), convenient, and real-time monitoring method is urgently needed for its early warning and efficient management. Here, we characterized the amino acid sequence in the sex pheromone receptors (SPRs) recognizing the pheromone components of H. armigera by three-dimensional (3D) modeling and molecular docking. Next, sex pheromone receptor-derived peptides (SPRPs) were synthesized and conjugated to nanotubes by chemical connection. The modified nanotubes were used to fabricate a sensor capable of real-time monitoring of gaseous sex pheromone compounds with a low LOD (∼10 ppb for Z11-16:Ald) and selectivity, and the sensor was able to detect a single live H. armigera. Furthermore, the developed biosensor allowed direct monitoring of the pheromone release dynamics by female H. armigera and showed that the release was instantly reduced in response to light. Here, we report the first demonstration of a biosensing method for detecting gaseous sex pheromones and live H. armigera. The findings show the great potential of the SPRP sensor for broad applications in insect biology study and infestation monitoring.