MicroRNA Detection through DNAzyme-Mediated Disintegration of Magnetic Nanoparticle Assemblies

DNA-Mediated Magnetic-Dimer Assembly for Fault-Free Ultra-High-Field Magnetic Resonance Imaging of Tumors

Ultra-high-field (UHF) magnetic resonance imaging (MRI) stands as a pivotal cornerstone in biomedical imaging, yet the challenge of false imaging persists, constraining its full potential. Despite the development of dual-mode contrast agents improving conventional MRI, their effectiveness in UHF remains suboptimal due to the high magnetic moment, resulting in diminished T1 relaxivity and excessively enhanced T2 relaxivity. Herein, we report a DNA-mediated magnetic-dimer assembly (DMA) of iron oxide nanoparticles that harnesses UHF-tailored nanomagnetism for fault-free UHF-MRI. DMA exhibits a dually enhanced longitudinal relaxivity of 4.42 mM-1·s-1 and transverse relaxivity of 26.23 mM-1·s-1 at 9 T, demonstrating a typical T1-T2 dual-mode UHF-MRI contrast agent. Importantly, DMA leverages T1-T2 dual-modality image fusion to achieve artifact-free breast cancer visualization, effectively filtering interference from hundred-micrometer-level false-positive signals with unprecedented precision. The UHF-tailored T1-T2 dual-mode DMA contrast agents hold promise for elevating the accuracy of MR imaging in disease diagnosis.

Multienzymatic disintegration of DNA-scaffolded magnetic nanoparticle assembly for malarial mitochondrial DNA detection

Early diagnosis of malaria can prevent the spread of disease and save lives, which, however, remains challenging in remote and less developed regions. Here we report a portable and low-cost optomagnetic biosensor for rapid amplification and detection of malarial mitochondrial DNA. Bioresponsive magnetic nanoparticle assemblies are constructed by using nucleic acid scaffolds containing endonucleolytic DNAzymes and their substrates, which can be activated by the presence of target DNA and self-disintegrated to release magnetic nanoparticles for optomagnetic quantification. Specifically, target molecules can induce padlock probe ligation and subsequent one-pot homogeneous cascade reactions consisting of nicking-enhanced rolling circle amplification, DNAzyme-assisted nucleic acid recycling, and strand-displacement-driven disintegration of the magnetic assembly. With an optimized magnetic actuation process for reaction acceleration, a detection limit of 1 fM can be achieved by the proposed biosensor with a total assay time of ca. 90 min and a dynamic detection range spanning 3 orders of magnitude. The robustness of the system was validated by testing target molecules spiked in 5% serum samples. Clinical sample validation was conducted by testing malaria-positive clinical blood specimens, obtaining quantitative results concordant with qPCR measurements.

Multicomponent DNAzyme Nanomachines: Structure, Applications, and Prospects

Nucleic acids (NAs) are important components of living organisms responsible for the storage and transmission of hereditary information. They form complex structures that can self-assemble and bind to various biological molecules. DNAzymes are NAs capable of performing simple chemical reactions, which makes them potentially useful elements for creating DNA nanomachines with required functions. This review focuses on multicomponent DNA-based nanomachines, in particular on DNAzymes as their main functional elements, as well as on the structure of DNAzyme nanomachines and their application in the diagnostics and treatment of diseases. The article also discusses the advantages and disadvantages of DNAzyme-based nanomachines and prospects for their future applications. The review provides information about new technologies and the possibilities of using NAs in medicine.

Amplification-free microRNA profiling with femtomolar sensitivity on a plasmonic enhanced fluorescence nano-chip

MicroRNAs (miRNAs) are a class of small, non-coding RNA molecules involved in the regulation of gene expression, thus considered as promising biomarkers for cancer, cardiovascular diseases, neurodegenerative diseases, etc. However, quantitative analysis of miRNAs faces challenges owing to their high homology, small size & ultra-low abundance, and disease occurrence is often related to abnormal expression of multiple miRNAs where method for parallel miRNAs analysis is required. In this work, multiplexed analysis of miRNAs was established on a plasmonic nano-chip capable of fluorescence enhancement in the near-infrared region. Combined with polyadenylation at the hydroxyl terminate of target miRNA to afford abundant sites for fluorophore labeling, our assay achieved amplification-free detection of miRNAs from nM to fM with the limit of detection down to ca. 5 fM. A miRNA panel was constructed to detect 10 miRNAs differentially expressed in MCF-7 and A549 cell lines and validated with qRT-PCR, demonstrating the practical application of this method. This scalable platform can be customized for different miRNA panels, facilitating multiple miRNA profiling for various diseases.

Magnetic Multipedal DNA Walking Nanomachine Driven by Catalytic Hairpin Assembly

miRNAs in circulating blood have been regarded as promising biomarkers for the diagnosis of a series of diseases. Development of ultrasensitive, reliable, and convenient methods for miRNA assay is of great significance. Herein, we present a novel electrochemical sensing strategy. The assembly of DNA walker strands on membrane-coated nanomaterials, target-mediated recycling activation, and electrochemical signal enrichment are integrated. Multipedal DNA walking with magnetic cores and a catalytic hairpin assembly at the electrode lead to the increase of electrochemical response, which can be used to probe initial target miRNA. This DNA walking nanomachine shows enhanced signal amplification efficiency and facile magnetic separation steps. It enables rapid analysis of miRNA at the attomole level and performs satisfactorily in samples of human circulating blood. Given the powerful sensitivity, facile operation, and excellent specificity, this magnetic multipedal DNA walker provides a promising way to determine miRNA level for biomedical applications.

Magnetic DNA Nanomachine for On-Particle Cascade Amplification-Based Ferromagnetic Resonance Detection of Plant MicroRNA

Plant microRNAs play critical roles in post-transcriptional gene regulation of many processes, thus motivating the development of accurate and user-friendly microRNA detection methods for better understanding of, e.g., plant growth, development, and abiotic/biotic stress responses. By integrating the capture probe, fuel strand, primer, and template onto the surface of a magnetic nanoparticle (MNP), we demonstrated a magnetic DNA nanomachine that could conduct an on-particle cascade amplification reaction in response to the presence of target microRNA. The cascade amplification consists of an exonuclease III-assisted target recycling step and a rolling circle amplification step, leading to changes in the MNP arrangement that can be quantified by ferromagnetic resonance spectroscopy. After a careful investigation of the exonuclease III side reaction, the biosensor offers a detection limit of 15 fM with a total assay time of ca. 70 min. Moreover, our magnetic DNA nanomachine is capable of discriminating the target microRNA from its family members. Our biosensor has also been tested on total endogenous microRNAs extracted from Arabidopsis thaliana leaves, with a performance comparable to qRT-PCR.

DNA Nanomachine (DNM) Biplex Assay for Differentiating Bacillus cereus Species

Conventional methods for the detection and differentiation of Bacillus cereus group species have drawbacks mostly due to the complexity of genetic discrimination between the Bacillus cereus species. Here, we describe a simple and straightforward assay based on the detected unamplified bacterial 16S rRNA by DNA nanomachine (DNM). The assay uses a universal fluorescent reporter and four all-DNA binding fragments, three of which are responsible for "opening up" the folded rRNA while the fourth stand is responsible for detecting single nucleotide variation (SNV) with high selectivity. Binding of the DNM to 16S rRNA results in the formation of the 10-23 deoxyribozyme catalytic core that cleaves the fluorescent reporter and produces a signal, which is amplified over time due to catalytic turnover. This developed biplex assay enables the detection of B. thuringiensis 16S rRNA at fluorescein and B. mycoides at Cy5 channels with a limit of detection of 30 × 10³ and 35 × 10³ CFU/mL, respectively, after 1.5 h with a hands-on time of ~10 min. The new assay may simplify the analysis of biological RNA samples and might be useful for environmental monitoring as a simple and inexpensive alternative to amplification-based nucleic acid analysis. The DNM proposed here may become an advantageous tool for detecting SNV in clinically significant DNA or RNA samples and can easily differentiate SNV under broadly variable experimental conditions and without prior amplification.

Protein-free, ultrasensitive miRNA analysis based on an entropy-driven catalytic reaction switched on a smart-responsive DNAzyme dual-walker amplification strategy

MicroRNAs (miRNAs), useful biomarkers for cancer diagnosis, play an important role in tumorigenesis and progression, but many of the current analysis methods can suffer from excessive protease dependence, being time-consuming and unsatisfactory performance. Therefore, a reliable sensing strategy for the protein-free, ultrasensitive analysis of tumor-associated miRNAs is desired. The proposed dual-walker biosensing strategy based on an entropy-driven catalytic (EDC) walker coupled with a smart-responsive DNAzyme walker was demonstrated for the dual-amplification detection of miRNA-21. Namely, the target miRNA-21 initiates the three-stranded substrate complex of the traditional EDC circuit to release the input trigger of the Dz walker, which recognizes the circular binding domain to restore the cleavage activity of the DzS-AuNP walker. The fluorescence signal continuously released from the AuNPs was recorded by a fluorescence reader for miRNA-21 sensing. The optimized dual-walker exhibited appreciable sensitivity with a detection limit of 70 fM, satisfactory flexibility, fine specificity and ideal stability for clinical serum sample assays. The proposed strategy may open a new avenue for the development of powerful DNA molecular tools for cancer diagnosis.

Formation of miRNA Nanoprobes-Conjugation Approaches Leading to the Functionalization

Recently, microRNAs (miRNA) captured the interest as novel diagnostic and prognostic biomarkers, with their potential for early indication of numerous pathologies. Since miRNA is a short, non-coding RNA sequence, the sensitivity and selectivity of their detection remain a cornerstone of scientific research. As such, methods based on nanomaterials have emerged in hopes of developing fast and facile approaches. At the core of the detection method based on nanotechnology lie nanoprobes and other functionalized nanomaterials. Since miRNA sensing and detection are generally rooted in the capture of target miRNA with the complementary sequence of oligonucleotides, the sequence needs to be attached to the nanomaterial with a specific conjugation strategy. As each nanomaterial has its unique properties, and each conjugation approach presents its drawbacks and advantages, this review offers a condensed overview of the conjugation approaches in nanomaterial-based miRNA sensing. Starting with a brief recapitulation of specific properties and characteristics of nanomaterials that can be used as a substrate, the focus is then centered on covalent and non-covalent bonding chemistry, leading to the functionalization of the nanomaterials, which are the most commonly used in miRNA sensing methods.

Emerging trends in the nanomedicine applications of functionalized magnetic nanoparticles as novel therapies for acute and chronic diseases

High-quality point-of-care is critical for timely decision of disease diagnosis and healthcare management. In this regard, biosensors have revolutionized the field of rapid testing and screening, however, are confounded by several technical challenges including material cost, half-life, stability, site-specific targeting, analytes specificity, and detection sensitivity that affect the overall diagnostic potential and therapeutic profile. Despite their advances in point-of-care testing, very few classical biosensors have proven effective and commercially viable in situations of healthcare emergency including the recent COVID-19 pandemic. To overcome these challenges functionalized magnetic nanoparticles (MNPs) have emerged as key players in advancing the biomedical and healthcare sector with promising applications during the ongoing healthcare crises. This critical review focus on understanding recent developments in theranostic applications of functionalized magnetic nanoparticles (MNPs). Given the profound global economic and health burden, we discuss the therapeutic impact of functionalized MNPs in acute and chronic diseases like small RNA therapeutics, vascular diseases, neurological disorders, and cancer, as well as for COVID-19 testing. Lastly, we culminate with a futuristic perspective on the scope of this field and provide an insight into the emerging opportunities whose impact is anticipated to disrupt the healthcare industry.

Optomagnetic biosensors: Volumetric sensing based on magnetic actuation-induced optical modulations

In comparison to alternative nanomaterials, magnetic micron/nano-sized particles show unique advantages, e.g., easy manipulation, stable signal, and high contrast. By applying magnetic actuation, magnetic particles exert forces on target objects for highly selective operation even in non-purified samples. We herein describe a subgroup of magnetic biosensors, namely optomagnetic biosensors, which employ alternating magnetic fields to generate periodic movements of magnetic labels. The optical modulation induced by the dynamics of magnetic labels is then analyzed by photodetectors, providing information of, e.g., hydrodynamic size changes of the magnetic labels. Optomagnetic sensing mechanisms can suppress the noise (by performing lock-in detection), accelerate the reaction (by magnetic force-enhanced molecular collision), and facilitate homogeneous/volumetric detection. Moreover, optomagnetic sensing can be performed using a low magnetic field (<10 mT) without sophisticated light sources or pickup coils, further enhancing its applicability for point-of-care tests. This review concentrates on optomagnetic biosensing techniques of different concepts classified by the magnetic actuation strategy, i.e., magnetic field-enhanced agglutination, rotating magnetic field-based particle rotation, and oscillating magnetic field-induced Brownian relaxation. Optomagnetic sensing principles applied with different actuation strategies are introduced as well. For each representative optomagnetic biosensor, a simple immunoassay strategy-based application is introduced (if possible) for methodological comparison. Thereafter, challenges and perspectives are discussed, including minimization of nonspecific binding, on-chip integration, and multiplex detection, all of which are key requirements in point-of-care diagnostics.

Programming a DNA tetrahedral nanomachine as an integrative tool for intracellular microRNA biosensing and stimulus-unlocked target regulation

The synchronous detection and regulation of microRNAs (miRNAs) are essential for the early tumor diagnosis and treatment but remains a challenge. An integrative DNA tetrahedral nanomachine was self-assembled for sensitive detection and negative feedback regulation of intracellular miRNAs. This nanomachine comprised a DNA tetrahedron nanostructure as the framework, and a miRNA inhibitor-controlled allosteric DNAzyme as the core. The DNA tetrahedron brought the DNAzyme and the substrate in spatial proximity and facilitated the cellular uptake of DNAzyme. In allosteric regulation of DNAzyme, the locked tetrahedral DNAzyme (L-tetra-D) and active tetrahedral DNAzyme (A-Tetra-D) were controlled by miRNA inhibitor. The combination of miRNA inhibitor and target could trigger the conformational change from L-tetra-D to A-Tetra-D. A-Tetra-D cleaved the substrate and released fluorescence for intracellular miRNA biosensing. The DNA tetrahedral nanomachine showed excellent sensitivity (with detection limit down to 0.77 pM), specificity (with one-base mismatch discrimination), biocompatibility and stability. Simultaneously, miRNA stimulus-unlocked inhibitor introduced by our nanomachine exhibited the synchronous regulation of target cells, of which regulatory performance has been verified by the upregulated levels of downstream genes/proteins and the increased cellular apoptosis. Our study demonstrated that the DNA tetrahedral nanomachine is a promising biosense-and-treat tool for the synchronous detection and regulation of intracellular miRNA, and is expected to be applied in the early diagnosis and tailored management of cancers.

Inorganic nanoparticles coupled to nucleic acid enzymes as analytical signal amplification tools

Nucleic acid enzymes (NAzymes) are a class of nucleic acid molecules with catalytic activity, which can be modulated by the presence of different species such as metal ions, genetic biomarkers, small molecules or proteins, among others. NAzymes offer several important advantages for development of novel bioanalytical strategies, resulting from their functionality as specific recognition elements and as amplified analytical signal generators, making them ideal candidates for developing highly specific bioanalytical strategies for the detection of a wide variety of targets. When coupled with the exceptional features of inorganic nanoparticles (NPs), the sensitivity of the assays can be significantly improved, allowing the detection of targets using many different detection techniques including visual readout, spectrophotometry, fluorimetry, electrochemiluminescence, voltammetry, and single-particle inductively coupled plasma-mass spectrometry. Here we provide an overview of the fundamentals of novel strategies developed to achieve analytical signal amplification based on the use of NAzymes coupled with inorganic NPs. Some representative examples of such strategies for the highly sensitive detection of different targets will be presented, including metal ions, proteins, DNA- or RNA-based biomarkers, and small molecules or microorganisms. Furthermore, future prospective challenges will be discussed.

Two-step formulation of magnetic nanoprobes for microRNA capture

MicroRNAs (miRs) belong to a family of short non-coding endogenous RNAs. Their over-expression correlates with various pathologies: for instance, miRNA-155 (miR-155) is over-expressed upon the development of breast cancers. However, the detection of miRs as disease biomarkers suffers from insufficient sensitivity. In the present study, we propose a protocol for a rapid and efficient generation of magnetic nanoprobes able to capture miR-155, with the aim of increasing its concentration. As a nanoprobe precursor, we first synthesized superparamagnetic iron oxide nanoparticles (SPIONs) coated with covalently attached polyethylene glycol carrying a free biotin terminus (PEG-bi). Using streptavidin–biotin interactions, the nanoprobes were formulated by functionalizing the surface of the nanoparticles with the miR sequence (CmiR) complementary to the target miR-155 (TmiR). The two-step formulation was optimized and validated using several analytical techniques, in particular with Size-Exclusion High Performance Liquid Chromatography (SE-HPLC). Finally, the proof of the nanoprobe affinity to TmiR was made by demonstrating the TmiR capture on model solutions, with the estimated ratio of 18 : 22 TmiR : CmiR per nanoprobe. The nanoprobes were confirmed to be stable after incubation in serum.

Two-step formulation of magnetic nanoprobes for microRNA capture.

Self-Protected DNAzyme Walker with a Circular Bulging DNA Shield for Amplified Imaging of miRNAs in Living Cells and Mice

Abnormal expression of miRNAs is often detected in various human cancers. DNAzyme machines combined with gold nanoparticles (AuNPs) hold promise for detecting specific miRNAs in living cells but show short circulation time due to the fragility of catalytic core. Using miRNA-21 as the model target, by introducing a circular bulging DNA shield into the middle of the catalytic core, we report herein a self-protected DNAzyme (E) walker capable of fully stepping on the substrate (S)-modified AuNP for imaging intracellular miRNAs. The DNAzyme walker exhibits 5-fold enhanced serum resistance and more than 8-fold enhanced catalytic activity, contributing to the capability to image miRNAs much higher than commercial transfection reagent and well-known FISH technique. Diseased cells can accurately be distinguished from healthy cells. Due to its universality, DNAzyme walker can be extended for imaging other miRNAs only by changing target binding domain, indicating a promising tool for cancer diagnosis and prognosis.

DNA Tetrahedron-Based MNAzyme for Sensitive Detection of microRNA with Elemental Tagging

Heterogeneous immunoassay based on magnetic separation is commonly used in inductively coupled plasma-mass spectrometry (ICP-MS)-based biomedical analysis with elemental labeling. However, the functionalized magnetic beads (MBs) often suffer from non-specific adsorption and random distribution of the functional probes. To overcome these problems, DNA tetrahedron (DT)-functionalized MBs were designed and further conjugated with substrate modified Au NPs (Sub-AuNP). Based on the prepared MB-DT-AuNP probes, an MB-DT based multicomponent nucleic acid enzyme (MNAzyme) system involving Au NPs as the elemental tags was proposed for highly sensitive quantification of miRNA-155 by ICP-MS. Target miRNA would trigger the assembly of MNAzyme, and Sub-AuNP would be cleaved from the MB-DT-AuNP probe, resulting in a cyclic amplification. Single-stranded DNA-functionalized MB (MB-ssDNA)-AuNP probes were prepared as well. Comparatively, the amount of Au NPs grafted onto MB-ssDNA-AuNP probes was higher than that grafted onto MB-DT-AuNP probes. Meanwhile, a higher signal-to-noise ratio was obtained by using MB-DT-AuNP probes over MB-ssDNA-AuNP probes in the MNAzyme system. Under the optimal experimental conditions, the limit of detection for target miRNA obtained by using MB-DT-AuNP probes was 1.15 pmol L^-1, improved by 23 times over that obtained by the use of MB-ssDNA-AuNP probes. The proposed MB-DT-MNAzyme-ICP-MS method was applied to the analysis of miRNA-155 in serum samples, and recoveries of 86.7-94.6% were obtained. This method is featured with high sensitivity, good specificity, and simple operation, showing a great application potential in biomedical analysis.

Split Locations and Secondary Structures of a DNAzyme Critical to Binding-Assembled Multicomponent Nucleic Acid Enzymes for Protein Detection

RNA-cleaving DNAzymes and their multicomponent nucleic acid enzymes (MNAzymes) have been successfully used to detect nucleic acids and proteins. The appropriate split of the catalytic cores of DNAzymes is critical to the formation of MNAzymes with high catalytic activities. However, for protein detection, no systematic investigation has been made on the effects of the split locations and secondary structures of MNAzymes on the catalytic activities of the cleavage reaction. We systematically studied how split locations and secondary structures affect the activity of the MNAzymes that catalyze multiple cleavage steps. We engineered the MNAzymes on the basis of the RNA-cleaving DNAzyme 10-23 as a model system. We designed 28 pairs of MNAzymes, representing 14 different split locations and two secondary structures: the three-arm and the four-arm structures. By comparing the multiple turnover numbers (k_obs.m) of the 28 MNAzymes, we showed that the split location between the seventh cytosine and the eighth thymine of the catalytic core region and the four-arm structure resulted in optimum catalytic activity. Binding-induced DNA assembly of the optimized MNAzymes enabled sensitive detection of two model protein targets, demonstrating promising potential of the binding-assembled MNAzymes for protein analysis. The strategy of binding-assembled MNAzymes and systematic studies measuring multiple turnover numbers (k_obs.m) provide a new approach to studying other partial (split) DNAzymes and engineering better MNAzymes for the detection of specific proteins.

Point-of-need detection of pathogen-specific nucleic acid targets using magnetic particle spectroscopy

The ongoing COVID-19 pandemic stresses the need for widely available diagnostic tests for the presence of SARS-CoV-2 in individuals. Due to the limited availability of vaccines, diagnostic assays which are cheap, easy-to-use at the point-of-need, reliable and fast, are currently the only way to control the pandemic situation.

Here we present a diagnostic assay for the detection of pathogen-specific nucleic acids based on changes of the magnetic response of magnetic nanoparticles: The target-mediated hybridization of modified nanoparticles leads to an increase in the hydrodynamic radius. This resulting change in the magnetic behaviour in an ac magnetic field can be measured via magnetic particle spectroscopy (MPS), providing a viable tool for the accurate detection of target nucleic acids.

In this work we show that single stranded DNA can be detected in a concentration-dependent manner by these means. In addition to detecting synthetic DNA with an arbitrary sequence in a concentration down to 500 pM, we show that RNA and SARS-CoV-2-specific DNA as well as saliva as a sample medium can be used for an accurate assay. These proof-of-principle experiments show the potential of MPS based assays for the reliable and fast diagnostics of pathogens like SARS-CoV-2 in a point-of-need fashion without the need of complex sample preparation.

Tetrahedral DNA Nanoconjugates for Simultaneous Measurement of Telomerase Activity and miRNA

In this study, a tetrahedral DNA nanostructure was first self-assembled; this was then conjugated with gold nanoparticles (AuNPs) and carbon nanodots (CDs). The fabricated nanocomposites allow simultaneous analysis of telomerase activity and miRNA with dual fluorescence channels. By further introducing an iRGD peptide sequence, the nanoconjuates can be conveniently transferred inside living cells for in situ imaging. The analytical performances and anti-jamming capabilities are excellent. Meanwhile, the materials are highly biocompatible for intracellular applications. Therefore, the proposed biosystem shows great promise as a powerful tool for quantitative analysis of the dual biomarkers. The strategy can also be further exploited as a versatile platform for in situ detection of many other targets for early disease diagnosis.

Homogeneous circle-to-circle amplification for real-time optomagnetic detection of SARS-CoV-2 RdRp coding sequence

Circle-to-circle amplification (C2CA) is a specific and precise cascade nucleic acid amplification method consisting of more than one round of padlock probe ligation and rolling circle amplification (RCA). Although C2CA provides a high amplification efficiency with a negligible increase of false-positive risk, it contains several step-by-step operation processes. We herein demonstrate a homogeneous and isothermal nucleic acid quantification strategy based on C2CA and optomagnetic analysis of magnetic nanoparticle (MNP) assembly. The proposed homogeneous circle-to-circle amplification eliminates the need for additional monomerization and ligation steps after the first round of RCA, and combines two amplification rounds in a one-pot reaction. The second round of RCA produces amplicon coils that anneal to detection probes grafted onto MNPs, resulting in MNP assembly that can be detected in real-time using an optomagnetic sensor. The proposed methodology was applied for the detection of a synthetic complementary DNA of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2, also known as 2019-nCoV) RdRp (RNA-dependent RNA polymerase) coding sequence, achieving a detection limit of 0.4 fM with a dynamic detection range of 3 orders of magnitude and a total assay time of ca. 100 min. A mathematical model was set up and validated to predict the assay performance. Moreover, the proposed method was specific to distinguish SARS-CoV and SARS-CoV-2 sequences with high similarity.

DNA-only, microwell-based bioassay for multiplex nucleic acid detection with single base-pair resolution using MNAzymes

In disease diagnostics, single- and multiplex nucleic acid (NA) detection, with the potential to discriminate mutated strands, is of paramount importance. Current techniques that rely on target amplification or protein-enzyme based signal amplification are highly relevant, yet still plagued by diverse drawbacks including erroneous target amplification, and the limited stability of protein enzymes. As a solution, we present a multicomponent nucleic acid enzymes (MNAzymes)-based system for singleplex and multiplex detection of NA targets in microwells down to femtomolar (fM) concentrations, without the need for any target amplification or protein enzymes, while operating at room temperature and with single base-pair resolution. After successful validation of the MNAzymes in solution, their performance was further verified on beads in bulk and in femtoliter-sized microwells. The latter is not only a highly simplified system compared to previous microwell-based bioassays but, with the detection limit of 180 fM, it is to-date the most sensitive NAzyme-mediated, bead-based approach, that does not rely on target amplification or any additional signal amplification strategies. Furthermore, we demonstrated, for the first time, multiplexed target detection in microwells, both from buffer and nasopharyngeal swab samples, and presented superior single base-pair resolution of this assay. Because of the design flexibility of MNAzymes and direct demonstration in swab samples, this system holds great promise for multiplexed detection in other clinically relevant matrices without the need for any additional NA or protein components. Moreover, these findings open up the potential for the development of next-generation, protein-free diagnostic tools, including digital assays with single-molecule resolution.

Hydrazone chemistry assisted DNAzyme for the analysis of double targets

In this work, a hydrazone chemistry assisted DNAzyme has been designed and constructed. The introduction of hydrazone chemistry increases the versatility of DNAzymes. With superior catalytic capability, the hydrazone chemistry assisted DNAzyme has been successfully applied for the analysis of double targets. Taking 5-hydroxymethylfurfural (HMF) and lipopolysaccharide (LPS) as samples, the hydrazone chemistry assisted DNAzyme can be used for the detection of different combinations of targets. Moreover, because hydrazone chemistry is popular in nature, this work may also provide a new insight for the development of DNAzymes and their multifunctionality.

Evolution of Hybridization Probes to DNA Machines and Robots

Hybridization probes are RNA or DNA oligonucleotides or their analogs that bind to specific nucleotide sequences in targeted nucleic acids (analytes) via Watson-Crick base pairs to form probe-analyte hybrids. Formation of a stable hybrid would indicate the presence of a DNA or RNA fragment complementary to the known probe sequence. Some of the well-known technologies that rely on nucleic acid hybridization are TaqMan and molecular beacon (MB) probes, fluorescent in situ hybridization (FISH), polymerase chain reaction (PCR), antisense, siRNA, and CRISPR/cas9, among others. Although invaluable tools for DNA and RNA recognition, hybridization probes suffer from several common disadvantages including low selectivity under physiological conditions, low affinity to folded single-stranded RNA and double-stranded DNA, and high cost of dye-labeled and chemically modified probes. Hybridization probes are evolving into multifunctional molecular devices (dubbed here "multicomponent probes", "DNA machines", and "DNA robots") to satisfy complex and often contradictory requirements of modern biomedical applications. In the definition used here, "multicomponent probes" are DNA probes that use more than one oligonucleotide complementary to an analyzed sequence. A "DNA machine" is an association of a discrete number of DNA strands that undergoes structural rearrangements in response to the presence of a specific analyte. Unlike multicomponent probes, DNA machines unify several functional components in a single association even in the absence of a target. DNA robots are DNA machines equipped with computational (analytic) capabilities. This Account is devoted to an overview of the ongoing evolution of hybridization probes to DNA machines and robots. The Account starts with a brief excursion to historically significant and currently used instantaneous probes. The majority of the text is devoted to the design of (i) multicomponent probes and (ii) DNA machines for nucleic acid recognition and analysis. The fundamental advantage of both designs is their ability to simultaneously address multiple problems of RNA/DNA analysis. This is achieved by modular design, in which several specialized functional components are used simultaneously for recognition of RNA or DNA analytes. The Account is concluded with the analysis of perspectives for further evolution of DNA machines into DNA robots.

Avenues Toward microRNA Detection In Vitro: A Review of Technical Advances and Challenges

Over the decades, the biological role of microRNAs (miRNAs) in the post-transcriptional regulation of gene expression has been discovered in many cancer types, thus initiating the tremendous expectation of their application as biomarkers in the diagnosis, prognosis, and treatment of cancer. Hence, the development of efficient miRNA detection methods in vitro is in high demand. Extensive efforts have been made based on the intrinsic properties of miRNAs, such as low expression levels, high sequence homology, and short length, to develop novel in vitro miRNA detection methods with high accuracy, low cost, practicality, and multiplexity at point-of-care settings. In this review, we mainly summarized the newly developed in vitro miRNA detection methods classified by three key elements, including biological recognition elements, additional micro-/nano-materials and signal transduction/readout elements, their current challenges and further applications are also discussed.

Magnetic nanoarchitectures for cancer sensing, imaging and therapy

The use of magnetic nanoparticles for sensing and theranostics of cancer has grown substantially in the last decade. Since the pioneering studies, which reported magnetic nanoparticles for bio-applications more than fifteen years ago, nanomaterials have increased in complexity with different shapes (nanoflowers, nanospheres, nanocubes, nanostars etc.) and compositions (e.g. core-shell) of nanoparticles for an increase in the sensitivity (imaging or sensing) and efficiency through synergistic treatments such as hyperthermia and drug delivery. In this review, we describe recent examples concerning the use of magnetic nanoparticles for bio-applications, from the surface functionalization methods to the development of cancer sensors and nanosystems for magnetic resonance and other imaging methodologies. Multifunctional nanosystems (nanocomposites, core shell nanomaterials) for theranostic applications involving treatments such as hyperthermia, photodynamic therapy, targeted drug delivery, and gene silencing are also described. These nanomaterials could be the future of medicine, although their complexity raises concerns about their safety.