Plasmonic 3D Semiconductor-Metal Nanopore Arrays for Reliable Surface-Enhanced Raman Scattering Detection and In-Site Catalytic Reaction Monitoring

Magnetic-responsive sensors based on polydopamine macromolecules for highly sensitive detection of trace food colorant residues

As a kind of unique biomimetic macromolecule, polydopamine (PDA) have prominent in-situ reduction ability and interfacial adhesion. In this work, combined with in-situ reduction ability of PDA and excellent magnetic response performance of nickel foam (NF), a strategy was designed to fabricate a series of NF@PDA@AgNPs as magnetic-responsive surface enhancement Raman scattering (SERS) substrates for highly sensitive Rhodamine B (RhB) detection in chili powder. With crystal violet (CV) as probe molecule, the detection limit of SERS substrate could achieve 10-10 M, and the enhancement factor was as high as to 2.22 × 107. In addition, the NF@PDA@AgNPs SERS substrates showed excellent magnetic separation efficiency, good SERS uniformity and storage stability. More importantly, these substrates could achieve highly efficient collection and sensitive detection of RhB residues in chili powder by magnetic adsorption method, and the detection of limit was as low as to be 10-6 g/g. These NF@PDA@AgNPs substrates would be a great prospect for rapid and efficient pernicious contaminant detection in the chemical and biological fields.

Hydrogel-Coated SERS Microneedles for Drug Monitoring in Dermal Interstitial Fluid

In vivo drug monitoring is crucial for evaluating the effectiveness and safety of drug treatment. Blood sampling and analysis is the current gold standard but needs professional skills and cannot meet the requirements of point-of-care testing. Dermal interstitial fluid (ISF) showed great potential to replace blood for in vivo drug monitoring; however, the detection was challenging, and the drug distribution behavior in ISF was still unclear until now. In this study, we proposed surface-enhanced Raman spectroscopy (SERS) microneedles (MNs) for the painless and real-time analysis of drugs in ISF after intravenous injection. Using methylene blue (MB) and mitoxantrone (MTO) as model drugs, the innovative core-satellite structured Au@Ag SERS substrate, hydrogel coating over the MNs, rendered sensitive and quantitative drug detection in ISF of mice within 10 min. Based on this technique, the pharmacokinetics of the two drugs in ISF was investigated and compared with those in blood, where the drugs were analyzed via liquid chromatography-mass spectrometry. It was found that the MB concentration in ISF and blood was comparable, whereas the concentration of MTO in ISF was 2-3 orders of magnitude lower than in blood. This work proposed an efficient tool for ISF drug monitoring. More importantly, it experimentally proved that the penetration ratio of blood to ISF was drug-dependent, providing insightful information into the potential of ISF as a blood alternative for in vivo drug detection.

Silver-nanoparticle-coated Fe3O4/chitosan core-shell microspheres for rapid and ultrasensitive detection of thiram using surface magnetic solid-phase extraction-surface-enhanced Raman scattering (SMSPE-SERS)

We report a surface magnetic solid-phase extraction-surface-enhanced Raman scattering (SMSPE-SERS) method based on silver-nanoparticle-coated Fe3O4/chitosan (Fe3O4/CS@Ag) microspheres as the substrate, and this method integrates all steps from sample pretreatment to detection. Fe3O4/CS was synthesized by a one-step solvothermal method in which chitosan (CS) was used as a surface modifier and adsorbent. Fe3O4/CS@Ag microspheres exhibit both adsorption ability and SERS activity. Therefore, we used the SMSPE-SERS method to detect pesticide residues on fruit peel. The procedures of capturing, separating and enriching pesticides, as well as detection, are all integrated. In addition, the SERS substrate allows label-free detection of thiram pesticide in both fruit peel and apple juice. Owing to the uniform distribution of Ag NPs and the adsorption ability of CS, the thiram-detection sensitivity was sufficiently high to detect the lowest concentration of 1.2 ng/cm2, which was significantly lower than the maximum thiram residue limit (7 μg/cm2) in fruits. The method was comparable to high-performance liquid chromatography with recovery ranging from 86.60 to 109.69 %.

A porous silicon composite with irregular silver nano-dendritic particles: a rapid optical sensor for trace detection of malachite green in freshwater fish

This study focused on creating a SERS composite particle specifically designed for detecting malachite green. We synthesized silver nano-dendritic structures on p-type porous silicon using an external electric field, separating them from the silicon wafer. Ultrasonic crushing yielded irregular silver nanodendrite-modified porous silicon composite particles. Upon being tested in an aqueous solution of malachite green, these composite particles demonstrated significant surface-enhanced Raman scattering effects. Our findings highlight the exceptional performance of the SERS substrate composed of porous silicon and irregular silver nano-dendritic particles. It exhibited high sensitivity, specificity, consistent signal strength, and reliability in detecting trace amounts of malachite green in water. Under ideal conditions, the substrate could detect malachite green at concentrations as low as 10-8 M. Moreover, its swift response to trace amounts of malachite green in fish underscores its potential as an effective Raman detector.

A three-dimensional gold nanoparticles spherical liquid array for SERS sensitive detection of pesticide residues in apple

High-performance plasmonic substrates have recently attracted much research attention. Herein, a three-dimensional gold nanoparticles (AuNPs) spherical liquid array (SLA) with high "hot spots" and tunable nanometer gap by optimizing the proportion of AuNPs colloids over chloroform was synthesized based on a water-oil interfacial self-assembly strategy. The substrate demonstrated excellent surface-enhanced Raman scattering (SERS) performance using tetrathiafulvalene and rhodamine 6G (R6G) as probe molecules. With a simple extraction and soaking pretreatment process, the SLA exhibited high sensitivity for analysing triazophos on apple peels, with a limit of detection (LOD) of 0.005 µg/mL and recovery ranging from 96 to 110 %. Particularly, the chloroform produced an inherent characteristic peak at 665 cm-1, which was used as the internal standard to correct SERS signal fluctuation, leading to an improvement of the corresponding coefficient R2 from 0.97 to 0.99, thus improving the reproducibility. Therefore the SLA substrate possesses the potential for quantitative analysis of food contaminants.

Controllable Fabrication and Rectification of Bipolar Nanofluid Diodes in Funnel-Shaped Si3 N4 Nanopores

Solid-state nanopores attract widespread interest, owning to outstanding robustness, extensive material availability, as well as capability for flexible manufacturing. Bioinspired solid-state nanopores further emerge as potential nanofluidic diodes for mimicking the rectification progress of unidirectional ionic transport in biological K+ channels. However, challenges that remain in rectification are over-reliance on complicated surface modifications and limited control accuracy in size and morphology. In this study, suspended Si3 N4 films of only 100 nm thickness are used as substrate and funnel-shaped nanopores are controllably etched on that with single-nanometer precision, by focused ion beam (FIB) equipped with a flexibly programmable ion dose at any position. A small diameter 7 nm nanopore can be accurately and efficiently fabricated in only 20 ms and verified by a self-designed mathematical model. Without additional modification, funnel-shaped Si3 N4 nanopores functioned as bipolar nanofluidic diodes achieve high rectification by simply filling each side with acidic and basic solution, respectively. Main factors are finely tuned experimentally and simulatively to enhance the controllability. Moreover, nanopore arrays are efficiently prepared to further improve rectification performance, which has great potential for high-throughput practical applications such as extended release of drugs, nanofluidic logic systems, and sensing for environmental monitoring and clinical diagnosis.

ZnO nanorods decorated with Ag nanoflowers as a recyclable SERS substrate for rapid detection of pesticide residue in multiple-scenes

Pesticide residues threaten the ecological environment and human health. Therefore, developing high performance SERS substrate to achieve highly sensitive detection of pesticide residues is meaningful. In this study, based on the strategy of combining "hot spots" engineering and material hybridization, we construct a novel hybrid SERS substrate by depositing Ag nanoflowers (NFs) on ZnO nanorods (NRs). Benefiting from the synergistic effect of electromagnetic enhancement and charge transfer effect, the Ag NFs@ZnO NRs substrate exhibits a low detection limit (10^-13 M) for crystal violet molecules. This SERS substrate has good uniformity with a relative standard deviation of 7.463 %. Besides, owning to the photocatalytic property of ZnO NRs, the hybrid substrate can degrade probe molecules after SERS detection and realize recyclability. As a demonstration, we employed our SERS substrate for the trace detection of pesticide residues on apple surface and in river water. This study provides a new idea for improving the SERS performance of hybrid substrates.

TiO2 compact layer induced charge transfer enhancement in a three-dimensional TiO2-Ag array SERS substrate for quantitative and multiplex analysis

A highly sensitive and uniform surface-enhanced Raman scattering (SERS) substrate is the guarantee for reliable quantitative analysis. Herein, a three-dimensional TiO₂-Ag SERS substrate was prepared by growing a TiO₂ nanorods (NRs) array on a TiO₂ compact layer (c-TiO₂), followed by modification with Ag nanoparticles (AgNPs). The synergy between the c-TiO₂, semiconductor TiO₂ NRs and the plasmonic AgNPs collaboratively endowed it with high sensitivity, in which c-TiO₂ effectively blocked the recombination of electrons and holes, and the charge transfer enhancement contributed 10-fold improvement over that without the c-TiO₂ substrate. Besides the high sensitivity, the TiO₂-Ag hybrid array SERS substrate also showed quantitative and multi-component detecting capability. The limit of detection (LOD) for crystal violet (CV) was determined to be 10^-9 M even with a portable Raman instrument. The TiO₂-Ag composite structure was extended to detect organic pesticides (thiram, triazophos and fonofos), and the LODs for thiram, triazophos and fonofos were measured to be 10^-7 M, 10^-7 M and 10^-6 M, respectively. In addition, the realistic simulation detecting pesticide residues for a real sample of dendrobium was demonstrated. The sensitive, quantitative and multiplex analysis of the TiO₂-Ag hybrid array substrate indicated its great potential in the rapid detection of pesticide residues in real samples.

Interface Design of 3D Flower-like Ag@ZnSe Composites: SERS and Photocatalytic Performance

In this work, we cosputtered Ag and ZnSe on a polystyrene template to form a three-dimensional (3D) Ag@ZnSe (x) structure. The 3D surface morphology and material composition that provided abundant "hot spots" were controlled by adjusting the sputtering power of the ZnSe, which was confirmed by finite-difference time-domain (FDTD) simulation. The introduction of ZnSe into the noble metal Ag also introduced a charge-transfer (CT) effect into the system, and the CT path was proven with the two-dimensional correlation spectroscopy (2D-COS)-surface-enhanced Raman scattering (SERS) technique. In addition, the substrate exhibited excellent catalytic activity due to the CT effect. The catalyzed degradation of malachite green (MG) was due to the CT effect in the system, and the catalytic process was successfully monitored by in situ SERS. Most importantly, the catalytic degradation by Ag@ZnSe (x) with different parameters was proportional to the degree of CT (ρ_CT). The SERS and catalytic mechanisms were analyzed in depth with the 2D-COS-SERS technique, which was also useful in verifying the CT process. The catalytic sites for MG were successfully monitored with the 2D-COS-SERS technique. This study provides a reference for studies of the synergistic effects of the electromagnetic mechanism and CT, as well as a new perspective on photocatalysis with dye molecules and monitoring of the catalytic processes.

Solid-State Nanopore Array: Manufacturing and Applications

Nanopore brings extraordinary properties for a variety of potential applications in various industrial sectors. Since manufacturing of solid-state nanopore is first reported in 2001, solid-state nanopore has become a hot topic in the recent years. An increasing number of manufacturing methods have been reported, with continuously decreased sizes from hundreds of nanometers at the beginning to ≈1 nm until recently. To enable more robust, sensitive, and reliable devices required by the industry, researchers have started to explore the possible methods to manufacture nanopore array which presents unprecedented challenges on the fabrication efficiency, accuracy and repeatability, applicable materials, and cost. As a result, the exploration of fabrication of nanopore array is still in the fledging period with various bottlenecks. In this article, a wide range of methods of manufacturing nanopores are summarized along with their achievable morphologies, sizes, inner structures for characterizing the main features, based on which the manufacturing of nanopore array is further addressed. To give a more specific idea on the potential applications of nanopore array, some representative practices are introduced such as DNA/RNA sequencing, energy conversion and storage, water desalination, nanosensors, nanoreactors, and dialysis.

A Bioinspired Ag Nanoparticle/PPy Nanobowl/TiO2 Micropyramid SERS Substrate

In this paper, the micropyramid structure was transferred to the TiO₂ substrate by soft imprinting. Then, the PPy nanobowls were assembled onto the surface of the TiO₂ micropyramids through the induction of the PS template. Finally, a layer of Ag nanoparticles was deposited on the surface of PPy nanobowls to form a novel Ag nanoparticle/PPy nanobowl/TiO₂ micropyramid SERS substrate. Its structure is similar to the bioinspired compound eyes. This substrate exhibited excellent antireflection, ultra-sensitivity, excellent uniformity, and recyclability. The concentration of R6G molecules can be detected as low as 10^-9 mol/L, and the Raman enhancement factor can reach 3.4 × 10⁵. In addition, the excellent catalytic degradation performance of the substrate ensures recyclability. This work proves that the micropyramid structure can be applied to other SERS materials besides silicon by the above methods, which broadens the selection range of composite SERS materials.

Reduced graphene oxide on silver nanoparticle layers-decorated titanium dioxide nanotube arrays as SERS-based sensor for glyphosate direct detection in environmental water and soil

When glyphosate, a widely used organophosphate herbicide in agricultural applications, contaminates the environment, it could lead to chronic harm to human health. Herein, an efficient, air-stable and reusable surface-enhanced Raman scattering (SERS) substrate was designed to be an analytical tool for direct determination of glyphosate. A vertical heterostructure of reduced graphene oxide (rGO)-wrapped dual-layers silver nanoparticles (AgNPs) on titania nanotube (TiO2 NTs) arrays was constructed as a SERS substrate. The TiO2 NTs/AgNPs-rGO exhibited high SERS performance for methylene blue detection, offering an analytical enhancement factor (AEF) as large as 7.1 × 108 and the limit of detection (LOD) as low as 10-14 M with repeatability of 4.4 % relative standard deviation (RSD) and reproducibility of 2.0 % RSD. The sensor was stable in ambient and was reusable after photo-degradation. The designed sensor was successfully applied for glyphosate detection with a LOD of 3 µg/L, which is below the maximum contaminant level of glyphosate in environmental water, as recommended by the U.S. EPA and the European Union. A uniqueness of this study is that there is no significant difference between the real-world applications of the SERS sensor on direct glyphosate analysis in environmental samples compared to an analysis using ultra-high performance liquid chromatography.

Si/TiO2/Ag Multistorey Structures with Interfacial Charge Transfer for a Recyclable Surface-Enhanced Raman Scattering Substrate

In this work, highly ordered TiO₂/Ag bilayer structures on p-type silicon (Si) wafers are prepared by photolithography and electrochemical self-assembly methods. The interfacial charge transfer (CT) of this Si/TiO₂/Ag multistorey structure with a specially aligned work function is studied. This is important to deduce the interfacial electron migration behavior of SERS. The three-dimensional finite-difference time-domain (3D FDTD) simulation is used to explore the combined CT-EM enhancement mechanism. The result shows that the electron movement under the CT mechanism can induce the resonance effect of free electrons to further improve EM performance. In addition, the effect of agglomerated Ag nanoparticle size distribution on the SERS property and the self-cleaning property of Si/TiO₂/Ag multistorey structures is investigated. Finally, this unique structure of highly ordered Si/TiO₂/Ag SERS substrate shows superior sensitivity, reproducibility, and stability. Rhodamine 6G (R6G) with trace concentrations as low as 10^-15 M can be detected, and the EF is estimated to be about 8.9 × 10¹³. The relative standard deviation (RSD) at 1511 cm^-1 is about 4.7%. These results are very promising for the practical application of the SERS technique in the rapid trace determination in many fields.

Silver@mesoporous Anatase TiO2 Core-Shell Nanoparticles and Their Application in Photocatalysis and SERS Sensing

Nanostructured noble metal-semiconductor materials have been attracting increasing attention because of their broad application in the field of environmental remediation, sensing and photocatalysis. In this study, a facile approach for fabricating silver@mesoporousanataseTiO2 (Ag@mTiO2) core-shell nanoparticles employing sol-gel and hydrothermal reaction is demonstrated. The Ag@mTiO2nanoparticles display excellent surface-enhanced Raman scattering (SERS) sensitivity and they can detect the methylene blue (MB) molecules with the concentration of as low as 10−8 M. They also exhibit outstanding photocatalytic activity compared with mTiO2, due to the efficient separation and recombination restrain of electron–hole pairs under ultraviolet light. The Ag@mTiO2nanoparticles also present good stability and they can achieve recyclable photocatalytic degradation experiments for five times without loss of activity. Subsequently, the nanoparticles with dual functions were successfully used to in situ monitor the photodegradation process of MB aqueous solution. These results, demonstrating the multifunctional Ag@mTiO2 nanoparticles, hold promising applications for simultaneous SERS analysis and the removal of dye pollutants in environmental field.

3D hotspot matrix of Au nanoparticles on Au island film with a spacer layer of dithiol molecules for highly sensitive surface-enhanced Raman spectroscopy

Engineering of efficient plasmonic hotspots has been receiving great attention to enhance the sensitivity of surface-enhanced Raman scattering (SERS). In the present study, we propose a highly sensitive SERS platform based on Au nanoparticles (AuNPs) on Au island film (AuIF) with a spacer layer of 1,4-benzenedimethanethiol (BDMT). The three-dimensional (3D) hotspot matrix has been rationally designed based on the idea of employing 3D hotspots with a vertical nanogap between AuIF and AuNPs after generating large area two-dimensional hotspots of AuIF. AuNPs@BDMT@AuIF are fabricated by functionalizing BDMT on AuIF and then immobilizing AuNPs. The SERS performance is investigated with Rhodamine 6G as a probe molecule and the determined enhancement factor is 1.3 × 10⁵. The AuNPs@BDMT@AuIF are then employed to detect thiram, which is used as a fungicide, with a detection limit of 13 nM. Our proposed platform thus shows significant potential for use in highly sensitive SERS sensors.

Surface-enhanced Raman scattering of DNA bases using frozen silver nanoparticle dispersion as a platform

Raman spectroscopy is a powerful method to characterize molecules in various media. Although surface-enhanced Raman scattering (SERS) is often employed to compensate for the intrinsically poor sensitivity of Raman spectroscopy, there remain serious tasks, such as simple preparations of SERS substrates, sensitivity control, and reproducible measurements. Here, we propose freezing as an efficient way to overcome these problems in SERS measurements using DNA bases as model targets. Solutes are expelled from ice crystals and concentrated in the liquid phase upon freezing. Silver nanoparticles (AgNPs) are also concentrated in the liquid phase to aggregate with Raman target analytes. The SERS signal intensity is maximized when the AgNP concentration exceeds the critical aggregation value. Freezing allows up to 5000 times enhancements of the SERS signal. Thus, an efficient SERS platform is prepared by simple freezing. The simultaneous detection of four DNA bases effectively eliminates variations of signal intensities and allows the reliable determination of concentration ratios.

Ultrasensitive plasmon enhanced Raman scattering detection of nucleolin using nanochannels of 3D hybrid plasmonic metamaterial

Detection of cancer biomarker is of great significance in cancer diagnostics. In this work, we propose an ultrasensitive and in situ method for plasmon enhanced Raman scattering (PERS) detection of nucleolin (NCL) using a 3D hybrid plasmonic metamaterial (PM). In this aptasensor, thiolated complementary DNA (cDNA) immobilized on PM can hybridize with Rox-labeled NCL-binding aptamer (AS1411-Rox) to form a rigid double-stranded DNA (dsDNA). When NCL passes through the PM nanochannels under a transmembrane voltage bias, it interacts with AS1411-Rox to form G-quadruplexes (G4-AS1411-Rox), resulting in the release of AS1411-Rox from the nanochannels surface and the decrease in PERS signal of the reporter Rox. This change in PERS signals can be recorded in situ without the interference of external environment. With the help of the enrichment function of nanochannel, the present method is able to achieve fast NCL detection within 10 min with a detection limit as low as 71 pM. Furthermore, our method shows excellent specificity, reversibility, uniformity (relative standard deviation of ~6.86%) and reproducibility (~6.65%), providing a new platform for reliable cancer auxiliary diagnosis and drug screening.

Emerging graphene-based sensors for the detection of food adulterants and toxicants - A review

The detection of food adulterants and toxicants can prevent a large variety of adverse health conditions for the global population. Through the process of rapid sensing enabled by deploying novel and robust sensors, the food industry can assist in the detection of adulterants and toxicants at trace levels. Sensor platforms which exploit graphene-based nanomaterials satisfy this requirement due to outstanding electrical, optical and thermal properties. The materials' facile conjugation with linkers and biomolecules along with the option for further enhancement using nanoparticles results in highly sensitive and selective sensing characteristics. This review highlights novel applications of graphene derivatives for detection covering three important approaches; optical, electrical (field-effect) and electrochemical sensing. Suitable graphene-based sensors for portable devices as point-of-need platforms are also presented. The future scope of these sensors is discussed to showcase how these emerging techniques will disrupt the food detection sector for years to come.

Group-Targeting SERS Screening of Total Benzodiazepines Based on Large-Size (111) Faceted Silver Nanosheets Decorated with Zinc Oxide Nanoparticles

Rapid, quantitative, and group-targeting detection of total benzodiazepines (BZDs) is critical to create an accurate judgement in emergent medical and forensic settings. Large-size (111) faceted Ag nanosheets decorated with small ZnO nanoparticles were designed as the prominent surface-enhanced Raman scattering substrate, which possessed advantages of specific metal facets and additional charge-transfer (CT) effect from the semiconductor. The vital and bridge role of ZnO in the CT effect was systematically studied via experimental investigations and molecular dynamics simulation, which proves the essentiality of an appropriate ZnO decoration density. Upon determining optimal Ag NS/ZnO hybrids, a calibration curve of estazolam was established with a 0.5 nM detection limit. Based on the obtained curve, group-targeting screening was achieved toward total concentrations of five BZDs (estazolam, oxazepam, alprazolam, triazolam, and lorazepam). Importantly, the total concentrations of BZDs in mice serum were accurately monitored with changing analytical time during the metabolic process, which was in agreement with the tendency measured by liquid chromatography with tandem mass spectrometry.

Controllable In-Situ Growth of Silver Nanoparticles on Filter Paper for Flexible and Highly Sensitive SERS Sensors for Malachite Green Residue Detection

In this work, a series of highly flexible and sensitive surface-enhanced Raman scattering (SERS) substrates were fabricated by the in-situ growth of silver nanoparticles (AgNPs) on polydopamine (PDA) templated filter papers (FPs), based on mussel-inspired surface chemistry. The obtained FP@PDA@AgNPs strips exhibited high sensitivity and reproducibility with Rhodamine 6G (R6G) probe molecules, with a calculated detection limit of approximately 10-10 M. More critically, these FP@PDA@AgNPs strips could be used as outstanding flexible SERS sensors to quickly collect and detect malachite green (MG) residues on fish scales, crab shells and shrimp skins by a swabbing extraction method. The detection limits for MG residues were calculated to be approximately as low as 0.04635 pg/cm2, 0.06952 pg/cm2 and 0.09270 pg/cm2, respectively. This facile and efficient strategy could to be utilized as a universal approach to fabricating a variety of flexible, cheap and portable SERS sensors for surface contamination analysis, and has great potential in the environmental scientific analysis and food safety monitoring fields.

Inkjet-printed paper-based semiconducting substrates for surface-enhanced Raman spectroscopy

As a powerful analytical tool of molecular detection, surface-enhanced Raman spectroscopy (SERS) has attracted great attention in varied fields. However, it has seriously impeded the development of SERS that the preparation process is generally complicated and traditional substrates lack eco-friendliness, economy and flexibility. Herein, we fabricated the inkjet-printed paper-based semiconducting SERS substrates for the first time via an inexpensive office inkjet printer with representative two-dimensional MoO_3-x nanosheets ink. Compared with conventional substrates, these paper-based semiconducting substrates not only could meet the requirements of simple and large-scale preparation, but also realize efficient sample collection by merely swabbing the surface. We obtained the detection limit concentration of rhodamine 6G as low as 10^-7 M. Furthermore, these flexible paper-based substrates were successfully applied to detect crystal violet and malachite green on the fish surface by swabbing. With immense potentiality in practical applications, the inkjet-printed paper-based semiconducting SERS substrates are expected to open a new prospect for SERS.

Plasmon-coupled 3D porous hotspot architecture for super-sensitive quantitative SERS sensing of toxic substances on real sample surfaces

This paper reports a facile, fast, and cost-effective method for the synthesis of three-dimensional (3D) porous AgNPs/Cu composites as SERS substrates for the super-sensitive and quantitative detection of food organic contaminations. Due to the 3D porous hotspot architecture and the strong plasmonic coupling between Ag and Cu, the porous AgNPs/Cu substrate achieves ultrasensitive detection of multiple analytes as low as 10^-11 M (crystal violet, CV), 10^-9 M (malachite green, MG), 10^-11 M (acephate), and 10^-9 M (thiram) even with a portable Raman device. Moreover, this 3D solid substrate has good signal uniformity (RSD < 11%) and superior stability (<14% signal loss), allowing for practical SERS detections. Importantly, by simply wiping the real sample surface using the substrate, it successfully detects CV and MG residues on crayfish, and the limit of detection (LOD) of CV and MG is determined to be 1.14 × 10^-9 M and 0.94 × 10^-7 M, respectively. Further, the substrate can also be applied to detect acephate on eggplant with a LOD of 1.41 × 10^-9 M and thiram on an apple surface with a LOD of 1.04 × 10^-7 M. Note that all these SERS detections on real samples have a broad dynamic concentration range and a good linear dependence. As a "proof of concept", multi-component detection on a real sample has also been demonstrated. This 3D solid substrate possesses excellent detection sensitivity, diversity, and accuracy, which allows rapid and reliable determination of toxic substances in foods.

Recognition of plastic nanoparticles using a single gold nanopore fabricated at the tip of a glass nanopipette

A single gold nanopore with high surface enhanced Raman spectroscopy (SERS) activity is fabricated on the tip of a glass nanopipette.