Metabolic Engineering of Main Transcription Factors in Carbon, Nitrogen, and Phosphorus Metabolisms for Enhanced Production of Bacitracin in Bacillus licheniformis

Regulator DegU can remarkably influence alkaline protease AprE biosynthesis in Bacillus licheniformis 2709

Alkaline protease AprE, produced by Bacillus licheniformis 2709 is an important edible hydrolase, which has potential applications in nutrient acquisition and medicine. The expression of AprE is finely regulated by a complex transcriptional regulation system. However, there is little study on transcriptional regulation mechanism of AprE biosynthesis in Bacillus licheniformis, which limits system engineering and further enhancement of AprE. Here, the severely depressed expression of aprE in degU and degS deletion mutants illustrated that the regulator DegU and its phosphorylation played a crucial part in AprE biosynthesis. Further electrophoretic mobility shift assay (EMSA) in vitro indicated that phosphorylated DegU can directly bind to the regulatory region though the DNase I foot-printing experiments failed to observe protected region. The plasmid-mediated overexpression of degU32 (Hy) obviously improved the yield of AprE by 41.6 % compared with the control strain, which demonstrated the importance of phosphorylation state of DegU on the transcription of aprE in vivo. In this study, the putative binding sequence of aprE (5'-TAAAT……AAAAT…….AACAT…TAAAA-3') located upstream -91 to -87 bp, -101 to -97 bp, -195 to -191 bp, -215 to -211 bp of the transcription start site (TSS) in B. licheniformis was computationally identified based on the DNA-binding sites of DegU in Bacillus subtilis. Overall, we systematically investigated the influence of the interplay between phosphorylated DegU and its cognate DNA sequence on expression of aprE, which not only contributes to the further AprE high-production in a genetically modified host in the future, but also significantly increases our understanding of the aprE transcription mechanism.

A Point Mutation in Cassette Relieves the Repression Regulation of CcpA Resulting in an Increase in the Degradation of 2,3-Butanediol in Lactococcus lactis

In lactic acid bacteria, the global transcriptional regulator CcpA regulates carbon metabolism by repressing and activating the central carbon metabolism pathway, thus decreasing or increasing the yield of certain metabolites to maximize carbon flow. However, there are no reports on the deregulation of the inhibitory effects of CcpA on the metabolism of secondary metabolites. In this study, we identified a single-base mutant strain of Lactococcus lactis N8-2 that is capable of metabolizing 2,3-butanediol. It has been established that CcpA dissociates from the catabolite responsive element (cre) site due to a mutation, leading to the activation of derepression and expression of the 2,3-butanediol dehydrogenase gene cluster (butB and butA). Transcriptome analysis and quantitative polymerase chain reaction (Q-PCR) results showed significant upregulation of transcription of butB and butA compared to the unmutated strain. Furthermore, micro-scale thermophoresis experiments confirmed that CcpA did not bind to the mutated cre. Furthermore, in a bacterial two-plasmid fluorescent hybridization system, it was similarly confirmed that the dissociation of CcpA from cre eliminated the repressive effect of CcpA on downstream genes. Finally, we investigated the differing catalytic capacities of the 2,3-butanediol dehydrogenase gene cluster in L. lactis N8-1 and L. lactis N8-2 for 2,3-butanediol. This led to increased expression of butB and butA, which were deregulated by CcpA repression. This is the first report on the elimination of the deterrent effect of CcpA in lactic acid bacteria, which changes the direction of enzymatic catalysis and alters the direction of carbon metabolism. This provides new perspectives and strategies for metabolizing 2,3-butanediol using bacteria in synthetic biology.

Harnessing genetic engineering to drive economic bioproduct production in algae

Our reliance on agriculture for sustenance, healthcare, and resources has been essential since the dawn of civilization. However, traditional agricultural practices are no longer adequate to meet the demands of a burgeoning population amidst climate-driven agricultural challenges. Microalgae emerge as a beacon of hope, offering a sustainable and renewable source of food, animal feed, and energy. Their rapid growth rates, adaptability to non-arable land and non-potable water, and diverse bioproduct range, encompassing biofuels and nutraceuticals, position them as a cornerstone of future resource management. Furthermore, microalgae's ability to capture carbon aligns with environmental conservation goals. While microalgae offers significant benefits, obstacles in cost-effective biomass production persist, which curtails broader application. This review examines microalgae compared to other host platforms, highlighting current innovative approaches aimed at overcoming existing barriers. These approaches include a range of techniques, from gene editing, synthetic promoters, and mutagenesis to selective breeding and metabolic engineering through transcription factors.

Development of an Inosine Hyperproducer from Bacillus licheniformis by Systems Metabolic Engineering

Inosine is widely used in food, chemical, and medicine. This study developed Bacillus licheniformis into an inosine hyperproducer through systems metabolic engineering. First, purine metabolism was activated by deleting inhibitors PurR and YabJ and overexpressing the pur operon. Then, the 5-phosphoribosyl-1-pyrophosphate (PRPP) supply was increased by optimizing the glucose transport system and pentose phosphate pathway, increasing the inosine titer by 97% and decreasing the titers of byproducts by 36%. Next, to prevent the degradation of inosine, genes deoD and pupG coding purine nucleoside phosphorylase were deleted, accumulating 0.91 g/L inosine in the culture medium. Additionally, the downregulation of adenosine 5'-monophosphate (AMP) synthesis pathway increased the inosine titer by 409%. Importantly, enhancing the glycine and aspartate supply increased the inosine titer by 298%. Finally, the guanosine synthesis pathway was blocked, leading to strain IR-8-2 producing 27.41 g/L inosine with a 0.46 g inosine/g glucose yield and a 0.38 g/(L·h) productivity in a shake flask.

Design of a sorbitol-activated nitrogen metabolism-dependent regulatory system for redirection of carbon metabolism flow in Bacillus licheniformis

Synthetic regulation of metabolic fluxes has emerged as a common strategy to improve the performance of microbial cell factories. The present regulatory toolboxes predominantly rely on the control and manipulation of carbon pathways. Nitrogen is an essential nutrient that plays a vital role in growth and metabolism. However, the availability of broadly applicable tools based on nitrogen pathways for metabolic regulation remains limited. In this work, we present a novel regulatory system that harnesses signals associated with nitrogen metabolism to redirect excess carbon flux in Bacillus licheniformis. By engineering the native transcription factor GlnR and incorporating a sorbitol-responsive element, we achieved a remarkable 99% inhibition of the expression of the green fluorescent protein reporter gene. Leveraging this system, we identified the optimal redirection point for the overflow carbon flux, resulting in a substantial 79.5% reduction in acetoin accumulation and a 2.6-fold increase in acetate production. This work highlight the significance of nitrogen metabolism in synthetic biology and its valuable contribution to metabolic engineering. Furthermore, our work paves the way for multidimensional metabolic regulation in future synthetic biology endeavors.

Antimicrobial peptides from Bacillus spp. and strategies to enhance their yield

Antibiotic resistance is a growing concern that is affecting public health globally. The search for alternative antimicrobial agents has become increasingly important. Antimicrobial peptides (AMPs) produced by Bacillus spp. have emerged as a promising alternative to antibiotics, due to their broad-spectrum antimicrobial activity against resistant pathogens. In this review, we provide an overview of Bacillus-derived AMPs, including their classification into ribosomal (bacteriocins) and non-ribosomal peptides (lipopeptides and polyketides). Additionally, we delve into the molecular mechanisms of AMP production and describe the key biosynthetic gene clusters involved. Despite their potential, the low yield of AMPs produced under normal laboratory conditions remains a challenge to large-scale production. This review thus concludes with a comprehensive summary of recent studies aimed at enhancing the productivity of Bacillus-derived AMPs. In addition to medium optimization and genetic manipulation, various molecular strategies have been explored to increase the production of recombinant antimicrobial peptides (AMPs). These include the selection of appropriate expression systems, the engineering of expression promoters, and metabolic engineering. Bacillus-derived AMPs offer great potential as alternative antimicrobial agents, and this review provides valuable insights on the strategies to enhance their production yield, which may have significant implications for combating antibiotic resistance. KEY POINTS: • Bacillus-derived AMP is a potential alternative therapy for resistant pathogens • Bacillus produces two main classes of AMPs: ribosomal and non-ribosomal peptides • AMP yield can be enhanced using culture optimization and molecular approaches.

Microbial synthesis of bacitracin: Recent progress, challenges, and prospects

Microorganisms are important sources of various natural products that have been commercialized for human medicine and animal healthcare. Bacitracin is an important antibacterial natural product predominantly produced by Bacillus licheniformis and Bacillus subtilis, and it is characterized by a broad antimicrobial spectrum, strong activity and low resistance, thus bacitracin is extensively applied in animal feed and veterinary medicine industries. In recent years, various strategies have been proposed to improve bacitracin production. Herein, we systematically describe the regulation of bacitracin biosynthesis in genus Bacillus and its associated mechanism, to provide a theoretical basis for bacitracin overproduction. The metabolic engineering strategies applied for bacitracin production are explored, including improving substrate utilization, using an enlarged precursor amino acid pool, increasing ATP supply and NADPH generation, and engineering transcription regulators. We also present several approaches of fermentation process optimization to facilitate the industrial large-scale production of bacitracin. Finally, the challenges and prospects associated with microbial bacitracin synthesis are discussed to facilitate the establishment of high-yield and low-cost biological factories.

Genome Sequencing and Genetic Engineering Reveal the Contribution of Bacitracin Produced by Bacillus paralicheniformis CPL618 to Anti-Staphylococcus aureus Activity

Staphylococcus aureus is one of the important pathogens causing human diseases, especially its treatment has great challenges due to its resistance to methicillin and vancomycin. The Bacillus strains are known to be major sources of second metabolites that can function as drugs. Therefore, it is of great value to excavate metabolites with good inhibitory activity against S. aureus from Bacillus strains. In this study, a strain Bacillus paralicheniformis CPL618 with good antagonistic activity against S. aureus was isolated and genome analysis showed that the size was 4,447,938 bp and contained four gene clusters fen, bac, dhb, and lch which are potentially responsible for four cyclic peptides fengycin, bacitracin, bacillibactin, and lichenysin biosynthesis, respectively. These gene clusters were knockout by homologous recombination. The bacteriostatic experiment results showed that the antibacterial activity of ∆bac decreased 72.3% while Δfen, Δdhb, and ΔlchA did not significantly changed as that of wild type. Interestingly, the maximum bacitracin yield was up to 92 U/mL in the LB medium, which was extremely unusual in wild type strains. To further improve the production of bacitracin, transcription regulators abrB and lrp were knocked out, the bacitracin produced by ΔabrB, Δlrp, and ΔabrB + lrp was 124 U/mL, 112 U/mL, and 160 U/ml, respectively. Although no new anti-S. aureus compounds was found by using genome mining in this study, the molecular mechanisms of high yield of bacitracin and anti-S. aureus in B. paralicheniformis CPL618 were clarified. Moreover, B. paralicheniformis CPL618 was further genetically engineered for industrial production of bacitracin.

Modular Engineering to Enhance Keratinase Production for Biotransformation of Discarded Feathers

Biotransformation of wasted feathers via feather-degrading enzyme has gained immense popularity, low conversion efficiency hinders its scale application, and the main purpose of this study is to improve feather-degrading enzyme production in Bacillus licheniformis. Firstly, keratinase from Bacillus amyloliquefaciens K11 was attained with the best performance for feather hydrolysis, via screening several extracellular proteases from Bacillus; also, feather powder was proven as the most suitable substrate for determination of feather-degrading enzyme activity. Then, expression elements, including signal peptides and promoters, were optimized, and the combination of signal peptide SP_SacC with promoter Pdual3 owned the best performance, keratinase activity aggrandized by 6.21-fold. According to amino acid compositions of keratinase and feeding assays, Ala, Val, and Ser were proven as critical precursors, and strengthening these precursors' supplies via metabolic pathway optimization resulted in a 33.59% increase in the keratinase activity. Furthermore, keratinase activity reached 2210.66 U/mL, up to 56.74-fold from the original activity under the optimized fermentation condition in 3-L fermentor. Finally, the biotransformation process of discarded feathers by the fermented keratinase was optimized, and our results indicated that 90.94% of discarded feathers (16%, w/v) were decomposed in 12 h. Our results suggested that strengthening precursor amino acids' supplies was an efficient strategy for enhanced production of keratinase, and this research provided an efficient strain as well as the biotransformation process for discarded feather re-utilization.

Systematic Adaptation of Bacillus licheniformis to 2-Phenylethanol Stress

The compound 2-phenylethanol (2-PE) is a bulk flavor and fragrance with a rose-like aroma that can be produced by microbial cell factories, but its cellular toxicity inhibits cellular growth and limits strain performance. Specifically, the microbe Bacillus licheniformis has shown a strong tolerance to 2-PE. Understanding these tolerance mechanisms is crucial for achieving the hyperproduction of 2-PE. In this report, the mechanisms of B. licheniformis DW2 resistance to 2-PE were studied by multi-omics technology coupled with physiological and molecular biological approaches. 2-PE induced reactive oxygen species formation and affected nucleic acid, ribosome, and cell wall synthesis. To manage 2-PE stress, the antioxidant and global stress response systems were activated; the repair system of proteins and homeostasis of the ion and osmotic were initiated. Furthermore, the tricarboxylic acid cycle and NADPH synthesis pathways were upregulated; correspondingly, scanning electron microscopy revealed that cell morphology was changed. These results provide deeper insights into the adaptive mechanisms of B. licheniformis to 2-PE and highlight the potential targets for genetic manipulation to enhance 2-PE resistance. IMPORTANCE The ability to tolerate organic solvents is essential for bacteria producing these chemicals with high titer, yield, and productivity. As exemplified by 2-PE, bioproduction of 2-PE represents a promising alternative to chemical synthesis and plant extraction approaches, but its toxicity hinders successful large-scale microbial production. Here, a multi-omics approach is employed to systematically study the mechanisms of B. licheniformis DW2 resistance to 2-PE. As a 2-PE-tolerant strain, B. licheniformis displays multifactorial mechanisms of 2-PE tolerance, including activating global stress response and repair systems, increasing NADPH supply, changing cell morphology and membrane composition, and remodeling metabolic pathways. The current work yields novel insights into the mechanisms of B. licheniformis resistance to 2-PE. This knowledge can also be used as a clue for improving bacterial performances to achieve industrial-scale production of 2-PE and potentially applied to the production of other relevant organic solvents, such as tyrosol and hydroxytyrosol.

Engineering of global transcription factors in Bacillus, a genetic tool for increasing product yields: a bioprocess overview

Transcriptional factors are well studied in bacteria for their global interactions and the effects they produce at the phenotypic level. Particularly, Bacillus subtilis has been widely employed as a model Gram-positive microorganism used to characterize these network interactions. Bacillus species are currently used as efficient commercial microbial platforms to produce diverse metabolites such as extracellular enzymes, antibiotics, surfactants, industrial chemicals, heterologous proteins, among others. However, the pleiotropic effects caused by the genetic modification of specific genes that codify for global regulators (transcription factors) have not been implicated commonly from a bioprocess point of view. Recently, these strategies have attracted the attention in Bacillus species because they can have an application to increase production efficiency of certain commercial interest metabolites. In this review, we update the recent advances that involve this trend in the use of genetic engineering (mutations, deletion, or overexpression) performed to global regulators such as Spo0A, CcpA, CodY and AbrB, which can provide an advantage for the development or improvement of bioprocesses that involve Bacillus species as production platforms. Genetic networks, regulation pathways and their relationship to the development of growth stages are also discussed to correlate the interactions that occur between these regulators, which are important to consider for application in the improvement of commercial-interest metabolites. Reported yields from these products currently produced mostly under laboratory conditions and, in a lesser extent at bioreactor level, are also discussed to give valuable perspectives about their potential use and developmental level directed to process optimization at large-scale.

Understanding and application of Bacillus nitrogen regulation: A synthetic biology perspective

BACKGROUND

Nitrogen sources play an essential role in maintaining the physiological and biochemical activity of bacteria. Nitrogen metabolism, which is the core of microorganism metabolism, makes bacteria able to autonomously respond to different external nitrogen environments by exercising complex internal regulatory networks to help them stay in an ideal state. Although various studies have been put forth to better understand this regulation in Bacillus, and many valuable viewpoints have been obtained, these views need to be presented systematically and their possible applications need to be specified.

AIM OF REVIEW

The intention is to provide a deep and comprehensive understanding of nitrogen metabolism in Bacillus, an important industrial microorganism, and thereby apply this regulatory logic to synthetic biology to improve biosynthesis competitiveness. In addition, the potential researches in the future are also discussed.

KEY SCIENTIFIC CONCEPT OF REVIEW

Understanding the meticulous regulation process of nitrogen metabolism in Bacillus not only could facilitate research on metabolic engineering but also could provide constructive insights and inspiration for studies of other microorganisms.

CRISPR/dCas9-based metabolic pathway engineering for the systematic optimization of exopolysaccharide biosynthesis in Streptococcus thermophilus

Streptococcus thermophilus is used extensively in the dairy industry and has shown great promise as a chassis cell for the biosynthesis of high-value metabolites. However, metabolic engineering in S. thermophilus lacks effective genetic modification tools to modulate gene expression to relieve metabolic burden and maximize the production of desired compounds. Here, we developed a clustered regularly interspaced short palindromic repeats interference (CRISPRi) system for efficient gene transcriptional modulation in S. thermophilus. Our CRISPRi system typically achieved 66 to 98% knockdown of single or multiple gene expression. We used CRISPRi for the biosynthesis of a new exopolysaccharide (EPS) as a paradigm model. Repression of galK at module of uridine diphosphate glucose sugar metabolism and overexpression of epsA and epsE at EPS synthesis module resulted in an approximately 2-fold increase in EPS titer (277 mg/L) when compared with a control strain. This study demonstrated the effectiveness of CRISPRi as a powerful metabolic engineering tool and synthetic biology strategy for S. thermophilus.

Designer bacterial cell factories for improved production of commercially valuable non-ribosomal peptides

Non-ribosomal peptides have gained significant attention as secondary metabolites of high commercial importance. This group houses a diverse range of bioactive compounds, ranging from biosurfactants to antimicrobial and cytotoxic agents. However, low yield of synthesis by bacteria and excessive losses during purification hinders the industrial-scale production of non-ribosomal peptides, and subsequently limits their widespread applicability. While isolation of efficient producer strains and optimization of bioprocesses have been extensively used to enhance yield, further improvement can be made by optimization of the microbial strain using the tools and techniques of metabolic engineering, synthetic biology, systems biology, and adaptive laboratory evolution. These techniques, which directly target the genome of producer strains, aim to redirect carbon and nitrogen fluxes of the metabolic network towards the desired product, bypass the feedback inhibition and repression mechanisms that limit the maximum productivity of the strain, and even extend the substrate range of the cell for synthesis of the target product. The present review takes a comprehensive look into the biosynthesis of bacterial NRPs, how the same is regulated by the cell, and dives deep into the strategies that have been undertaken for enhancing the yield of NRPs, while also providing a perspective on other potential strategies that can allow for further yield improvement. Furthermore, this review provides the reader with a holistic perspective on the design of cellular factories of NRP production, starting from general techniques performed in the laboratory to the computational techniques that help a biochemical engineer model and subsequently strategize the architectural plan.

Medium for the Production of Bacillus-Based Biocontrol Agent Effective against Aflatoxigenic Aspergillus flavus: Dual Approach for Modelling and Optimization

One of the leading limiting factors for wider industrial production and commercialization of microbial biopesticides refers to the high costs of cultivation media. The selection of alternative sources of macronutrients crucial for the growth and metabolic activity of the producing microorganism is a necessary phase of the bioprocess development. Gaining a better understanding of the influence of the medium composition on the biotechnological production of biocontrol agents is enabled through bioprocess modelling and optimization. In the present study, after the selection of optimal carbon and nitrogen sources, two modelling approaches were applied to mathematically describe the behavior of the examined bioprocess—the production of biocontrol agents effective against aflatoxigenic Aspergillus flavus strains. The modelling was performed using four independent variables: cellulose, urea, ammonium sulfate and dipotassium phosphate, and the selected response was the inhibition-zone diameter. After the comparison of the results generated by the Response Surface Methodology (RSM) and the Artificial Neural Network (ANN) approach, the first model was chosen for the further optimization step due to the better fit of the experimental results. As the final investigation step, the optimal cultivation medium composition was defined (g/L): cellulose 5.0, ammonium sulfate 3.77, dipotassium phosphate 0.3, magnesium sulfate heptahydrate 0.3.

Synthetic Biology Tools for Engineering Microbial Cells to Fight Superbugs

With the increase in clinical cases of bacterial infections with multiple antibiotic resistance, the world has entered a health crisis. Overuse, inappropriate prescribing, and lack of innovation of antibiotics have contributed to the surge of microorganisms that can overcome traditional antimicrobial treatments. In 2017, the World Health Organization published a list of pathogenic bacteria, including Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Escherichia coli (ESKAPE). These bacteria can adapt to multiple antibiotics and transfer their resistance to other organisms; therefore, studies to find new therapeutic strategies are needed. One of these strategies is synthetic biology geared toward developing new antimicrobial therapies. Synthetic biology is founded on a solid and well-established theoretical framework that provides tools for conceptualizing, designing, and constructing synthetic biological systems. Recent developments in synthetic biology provide tools for engineering synthetic control systems in microbial cells. Applying protein engineering, DNA synthesis, and in silico design allows building metabolic pathways and biological circuits to control cellular behavior. Thus, synthetic biology advances have permitted the construction of communication systems between microorganisms where exogenous molecules can control specific population behaviors, induce intracellular signaling, and establish co-dependent networks of microorganisms.

Transcriptome Analysis of Bacillus licheniformis for Improving Bacitracin Production

This study aims to find the targets that may influence the production of bacitracin based on RNA sequencing in Bacillus licheniformis. Transcriptional profiling revealed that (i) the expression of the bacT gene, encoding a type II thioesterase (TEII_bac), was positively correlated with bacitracin production and (ii) the oxygen uptake exhibited significant influence on precursor synthesis. The verified experiments showed that the overexpression of TEII_bac with an endogenous promoter increased the bacitracin A titer by 37.50%. Furthermore, the increase of oxygen availability through Vitreoscilla hemoglobin (VHb) expression increased the bacitracin A titer by 126.67% under oxygen-restricted conditions. From the transcriptome perspective, the results of this paper demonstrate that TEII_bac and oxygen supply are crucial to bacitracin production. This study also provides insights into the construction of chassis cells for the industrial production of secondary metabolites with a preference for aerobic conditions.

Multilevel metabolic engineering of Bacillus licheniformis for de novo biosynthesis of 2-phenylethanol

Due to its pleasant rose-like scent, 2-phenylethanol (2-PE) has been widely used in the fields of cosmetics and food. Microbial production of 2-PE offers a natural and sustainable production process. However, the current bioprocesses for de novo production of 2-PE suffer from low titer, yield, and productivity. In this work, a multilevel metabolic engineering strategy was employed for the high-level production of 2-PE. Firstly, the native alcohol dehydrogenase YugJ was identified and characterized for 2-PE production via genome mining and gene function analysis. Subsequently, the redirection of carbon flux into 2-PE biosynthesis by combining optimization of Ehrlich pathway, central metabolic pathway, and phenylpyruvate pathway enabled the production of 2-PE to a titer of 1.81 g/L. Specifically, AroK and AroD were identified as the rate-limiting enzymes of 2-PE production through transcription and metabolite analyses, and overexpression of aroK and aroD efficiently boosted 2-PE synthesis. The precursor competing pathways were blocked by eliminating byproduct formation pathways and modulating the glucose transport system. Under the optimal condition, the engineered strain PE23 produced 6.24 g/L of 2-PE with a yield and productivity of 0.14 g/g glucose and 0.13 g/L/h, respectively, using a complex medium in shake flasks. This work achieves the highest titer, yield, and productivity of 2-PE from glucose via the phenylpyruvate pathway. This study provides a promising platform that might be widely useful for improving the production of aromatic-derived chemicals.

Microbial production of small peptide: pathway engineering and synthetic biology

Small peptides are a group of natural products with low molecular weights and complex structures. The diverse structures of small peptides endow them with broad bioactivities and suggest their potential therapeutic use in the medical field. The remaining challenge is methods to address the main limitations, namely (i) the low amount of available small peptides from natural sources, and (ii) complex processes required for traditional chemical synthesis. Therefore, harnessing microbial cells as workhorse appears to be a promising approach to synthesize these bioactive peptides. As an emerging engineering technology, synthetic biology aims to create standard, well-characterized and controllable synthetic systems for the biosynthesis of natural products. In this review, we describe the recent developments in the microbial production of small peptides. More importantly, synthetic biology approaches are considered for the production of small peptides, with an emphasis on chassis cells, the evolution of biosynthetic pathways, strain improvements and fermentation.

Metabolic Engineering of Aspartic Acid Supply Modules for Enhanced Production of Bacitracin in Bacillus licheniformis

Bacitracin, a type of cyclic dodecapeptide antibiotic mainly produced by Bacillus, is widely used in fields of veterinary drug and feed additive. Modularization of metabolic pathways based on the concept of synthetic biology has been widely used in the efficient synthesis of target products. Here, we want to improve bacitracin production through strengthening aspartic acid (Asp) supply in B. licheniformis DW2. First, exogenous Asp addition assays implied that strengthening Asp supply benefited bacitracin production. Second, Asp synthetic pathways were strengthened via overexpressing aspartate dehydrogenase AspD and asparaginase AnsB, attaining recombinant strain DW2-ASP2, and bacitracin yield produced by DW2-ASP2 was 862.81 U/mL, increased by 14.05% compared with that of DW2 (756.49 U/mL). Then, to improve precursor oxaloacetate (OAA) accumulation for Asp synthesis, pyruvate carboxylase PycA and carbonic anhydrase EcaA were co-overexpressed in DW2-ASP2, and malic enzyme gene malS was deleted to weak overflow metabolism of tricarboxylic acid, and the attained strain DW2-ASP7 showed further increased bacitracin production from 862.81 to 989.23 U/mL. Subsequently, transporter YveA was identified as an Asp exporter, and bacitracin yield was increased to 1025.26 U/mL via deleting yveA, attaining strain DW2-ASP9. Finally, Asp ammonia-lyase gene aspA was disrupted to weaken Asp degradation, and bacitracin yield of attained strain DW2-ASP10 reached 1059.86 U/mL, increased by 40.10% compared to DW2. Taken together, this research demonstrated that metabolic engineering of Asp metabolic modules is an efficient strategy for enhancing bacitracin production, and these strategies could also be applied in the production of other peptide-related metabolites.

Construction and Characterization of a Gradient Strength Promoter Library for Fine-Tuned Gene Expression in Bacillus licheniformis

Bacillus licheniformis DW2 is an important industrial strain for bacitracin production, and it is also used for biochemical production, however, the lack of effective toolkit for precise regulation of gene expression hindered its application seriously. Here, a gradient strength promoter library was constructed based on bacitracin synthetase gene cluster promoter PbacA. First, different PbacA promoter variants were constructed via coupling PbacA with various 5'-UTRs, and expression ranges of 32.6-741.8% were attained among these promoters. Then, three promoters, PUbay (strong), PbacA (middle), and PUndh (weakest), were applied for red fluorescent protein (RFP) and keratinase expression assays, and these promoters were proven to have good universality for different proteins. Second, the promoter of bacitracin synthetase gene cluster was replaced by these three promoters, and bacitraicn titer was enhanced by 14.62% when PUbay was applied, which was decreased by 98.05% under the mediation of PUndh compared with that of the original strain DW2. Third, promoters PUbay, PUyvgO, and PUndh were selected to regulate the expression levels of critical genes that are responsible for pucheriminic acid synthesis, and pucheriminic acid yield was increased by 194.1% via manipulating synthetic and competitive pathways. Finally, promoters PUbay, PbacA, and PUndh were applied for green fluorescent protein (GFP) and RFP expression in Escherichia coli, and consistent effects were attained based on our results. Taken together, a gradient strength promoter library was constructed in this research, which provided an effective toolkit for fine-tuning gene expression and reprogramming metabolite metabolic flux in B. licheniformis.

Recent advances in tuning the expression and regulation of genes for constructing microbial cell factories

To overcome environmental problems caused by the use of fossil resources, microbial cell factories have become a promising technique for the sustainable and eco-friendly development of valuable products from renewable resources. Constructing microbial cell factories with high titers, yields, and productivity requires a balance between growth and production; to this end, tuning gene expression and regulation is necessary to optimise and precisely control complicated metabolic fluxes. In this article, we review the current trends and advances in tuning gene expression and regulation and consider their engineering at each of the three stages of gene regulation: genomic, mRNA, and protein. In particular, the technological approaches utilised in a diverse range of genetic-engineering-based tools for the construction of microbial cell factories are reviewed and representative applications of these strategies are presented. Finally, the prospects for strategies and systems for tuning gene expression and regulation are discussed.

CodY, ComA, DegU and Spo0A controlling lipopeptides biosynthesis in Bacillus amyloliquefaciens fmbJ

AIM

In the study, we investigated the regulatory effects of these genes (codY, comA, degU and spo0A) on the biosynthesis of three lipopeptides (bacillomycin D, fengycin and surfactin) in Bacillus amyloliquefaciens.

METHODS AND RESULTS

The codY, comA, degU and spo0A genes in B. amyloliquefaciens fmbJ were knocked out. The results showed that the productions of bacillomycin D were significantly reduced compared with that of fmbJ. Their deletion induced great changes in the levels of transcripts specifying metabolic pathways, quorum sensing system and substance transport system in fmbJ. Moreover, overexpression of these genes improved the productions of bacillomycin D. In particular, the overexpression of spo0A enhanced bacillomycin D yield up to 648·9 ± 60·9 mg l^-1 from 277·3 ± 30·5 mg l^-1 . In addition, the yields of surfactin in fmbJΔcodY and fmbJΔdegU were significantly improved, and the regulatory factor CodY had no significant effect on the synthesis of fengycin.

CONCLUSIONS

These genes positively regulated the expression of bacillomycin D and fengycin synthase genes in strain fmbJ. However, codY and degU negatively regulated surfactin biosynthesis. Moreover, it was found that CodY had a concentration dependence on bacillomycin D synthesis. Spo0A might play a direct regulatory role in the synthesis and secretion of bacillomycin D.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study indicated that genetic engineering of regulatory genes was an effective strategy to improve the yields of antimicrobial lipopeptides and provided promising strains for industrial production of lipopeptides.

Research Progress of the Biosynthesis of Natural Bio-Antibacterial Agent Pulcherriminic Acid in Bacillus

Pulcherriminic acid is a cyclic dipeptide found mainly in Bacillus and yeast. Due to the ability of pulcherriminic acid to chelate Fe3+ to produce reddish brown pulcherrimin, microorganisms capable of synthesizing pulcherriminic acid compete with other microorganisms for environmental iron ions to achieve bacteriostatic effects. Therefore, studying the biosynthetic pathway and their enzymatic catalysis, gene regulation in the process of synthesis of pulcherriminic acid in Bacillus can facilitate the industrial production, and promote the wide application in food, agriculture and medicine industries. After initially discussing, this review summarizes current research on the synthesis of pulcherriminic acid by Bacillus, which includes the crystallization of key enzymes, molecular catalytic mechanisms, regulation of synthetic pathways, and methods to improve efficiency in synthesizing pulcherriminic acid and its precursors. Finally, possible applications of pulcherriminic acid in the fermented food, such as Chinese Baijiu, applying combinatorial biosynthesis will be summarized.

Personalized Medicine for Antibiotics: The Role of Nanobiosensors in Therapeutic Drug Monitoring

Due to the high bacterial resistance to antibiotics (AB), it has become necessary to adjust the dose aimed at personalized medicine by means of therapeutic drug monitoring (TDM). TDM is a fundamental tool for measuring the concentration of drugs that have a limited or highly toxic dose in different body fluids, such as blood, plasma, serum, and urine, among others. Using different techniques that allow for the pharmacokinetic (PK) and pharmacodynamic (PD) analysis of the drug, TDM can reduce the risks inherent in treatment. Among these techniques, nanotechnology focused on biosensors, which are relevant due to their versatility, sensitivity, specificity, and low cost. They provide results in real time, using an element for biological recognition coupled to a signal transducer. This review describes recent advances in the quantification of AB using biosensors with a focus on TDM as a fundamental aspect of personalized medicine.

Systematic engineering of branch chain amino acid supply modules for the enhanced production of bacitracin from Bacillus licheniformis

Bacitracin is a broad-spectrum cyclic peptide antibiotic mainly produced by Bacillus, precursor amino acid supply served as the critical role during its synthesis. In this study, we systematically engineered branch-chain amino acid (BCAA) supply modules for bacitracin production. Firstly, we demonstrated that Ile and Leu acted as limiting precursors for bacitracin synthesis, and that BCAA synthetic pathways were strengthened via simultaneous overexpression of, feedback-resistance acetolactate synthase IlvBN^fbr, 2-isopropylmalate synthetase LeuA^fbr and BCAA aminotransferase YbgE. Using this approach, bacitracin yield from strain DW-BCAA2 was 892.54 U/mL, an increase of 18.32% compared with that DW2 (754.32 U/mL). Secondly, the BCAA permeases, YvbW and BraB, which have higher affinities for Leu and Ile transportation, respectively, were both identified as BCAA importers, with their overexpression improving intracellular BCAA accumulations and bacitracin yields. Finally, the leucine-responsive family regulator, lrpC was deleted to generate the final strain DW-BCAA6, with intracellular concentrations of Ile, Leu and Val increased by 2.26-, 1.90- and 0.72-fold, respectively. The bacitracin yield from DW-BCAA6 was 1029.83 U/mL, an increase of 36.52%, and is the highest bacitracin yield reported. Equally, concentrations of other byproducts including acetic acid, acetoin and 2,3-butanediol were all reduced. Taken together, we devised an efficient strategy for the enhanced production of bacitracin, and a promising B. licheniformis DW-BCAA6 strain was constructed for industrial production of bacitracin.

•

Enhancing intracellular BCAA accumulations benefited bacitracin synthesis.

•

YvbW and BraB were both identified as BCAA importers in B. licheniformis.

•

Deleting lrp increased brnQ transcription and intracellular BCAA concentrations.

•

Bacitracin yield produced by DW-BCAA6 was the highest currently reported.

Facilitating Protein Expression with Portable 5'-UTR Secondary Structures in Bacillus licheniformis

The 5'-untranslated region (5'-UTR) of prokaryotic mRNAs plays an essential role in post-transcriptional regulation. Bacillus species, such as Bacillus subtilis and Bacillus licheniformis, have gained considerable attention as microbial cell factories for the production of various valuable chemicals and industrial proteins. In this work, we developed a portable 5'-UTR sequence for enhanced protein output in the industrial strain B. licheniformis DW2. This sequence contains only ∼30 nt and forms a hairpin structure located right before the open reading frame. The optimized Shine-Dalgarno (SD) sequence was presented as a single strand on the loop of the hairpin for better ribosome recognition and recruitment. By optimizing the free energy of folding, this 5'-element could effectively enhance the expression of eGFP by ∼50-fold and showed good adaptability for other target proteins, including RFP, nattokinase, and keratinase. This 5'-UTR could promote the accessibility of both the SD sequence and start codon, leading to improved efficiency of translation initiation. Furthermore, the hairpin structure protected mRNA against 5'-exonucleases, resulting in enhanced mRNA stability. It is well-known that the stable structure at a ribosome binding site (RBS) impedes initiation in Escherichia coli. In this study, we presented a unique structure at a RBS that can effectively enhance protein production, which is an exception of this prevailing concept. By adjusting a single thermodynamic parameter and holding the other factors affecting protein output constant, a series of 5'-UTR elements with different expression strengths could be rationally designed for wide use in Bacillus sp.

Multistep Metabolic Engineering of Bacillus licheniformis To Improve Pulcherriminic Acid Production

The cyclodipeptide pulcherriminic acid, produced by Bacillus licheniformis, is derived from cyclo(l-Leu-l-Leu) and possesses excellent antibacterial activities. In this study, we achieved the high-level production of pulcherriminic acid via multistep metabolic engineering of B. licheniformis DWc9n*. First, we increased leucine (Leu) supply by overexpressing the ilvBHC-leuABCD operon and ilvD, involved in Leu biosynthesis, to obtain strain W1, and the engineered strain W2 was further attained by the deletion of gene bkdAB, encoding a branched-chain α-keto acid dehydrogenase in W1. As a result, the intracellular Leu content and pulcherriminic acid yield of W2 reached 147.4 mg/g DCW (dry cell weight) and 189.9 mg/liter, which were 227.6% and 48.9% higher than those of DWc9n*, respectively. Second, strain W3 was constructed through overexpressing the leucyl-tRNA synthase gene leuS in W2, and it produced 367.7 mg/liter pulcherriminic acid. Third, the original promoter of the pulcherriminic acid synthetase cluster yvmC-cypX in W3 was replaced with a proven strong promoter, PbacA, to produce the strain W4, and its pulcherriminic acid yield was increased to 507.4 mg/liter. Finally, pulcherriminic acid secretion was strengthened via overexpressing the transporter gene yvmA in W4, resulting in the W4/pHY-yvmA strain, which yielded 556.1 mg/liter pulcherriminic acid, increased by 337.8% compared to DWc9n*, which is currently the highest pulcherriminic acid yield to the best of our knowledge. Taken together, we provided an efficient strategy for enhancing pulcherriminic acid production, which could apply to the high-level production of other cyclodipeptides.IMPORTANCE Pulcherriminic acid is a cyclodipeptide derived from cyclo(l-Leu-l-Leu), which shares the same iron chelation group with hydroxamate sidephores. Generally, pulcherriminic acid-producing strains could be the perfect candidates for antibacterial and anti-plant-pathogenic fungal agents. In this study, we obtained the promising W4/pHY-yvmA pulcherriminic acid-producing strain via a multistep metabolic modification. The engineered W4/pHY-yvmA strain is able to achieve 556.1 mg/liter pulcherriminic acid production, which is the highest yield so far to the best of our knowledge.

Enhanced Bacitracin Production by Systematically Engineering S-Adenosylmethionine Supply Modules in Bacillus licheniformis

Bacitracin is a broad-spectrum veterinary antibiotic that widely used in the fields of veterinary drug and feed additive. S-Adenosylmethionine (SAM) is a critical factor involved in many biochemical reactions, especially antibiotic production. However, whether SAM affects bacitracin synthesis is still unknown. Here, we want to analyze the relationship between SAM supply and bacitracin synthesis, and then metabolic engineering of SAM synthetic pathway for bacitracin production in Bacillus licheniformis. Firstly, our results implied that SAM exogenous addition benefited bacitracin production, which yield was increased by 12.13% under the condition of 40 mg/L SAM addition. Then, SAM synthetases and Methionine (Met) synthetases from B. licheniformis, Corynebacterium glutamicum, and Saccharomyces cerevisiae were screened and overexpressed to improve SAM accumulation, and the combination of SAM synthetase from S. cerevisiae and Met synthetase from B. licheniformis showed the best performance, and 70.12% increase of intracellular SAM concentration (31.54 mg/L) and 13.08% increase of bacitraicn yield (839.54 U/mL) were achieved in resultant strain DW2-KE. Furthermore, Met transporters MetN and MetP were, respectively, identified as Met exporter and importer, and bacitracin yield was further increased by 5.94% to 889.42 U/mL via deleting metN and overexpressing metP in DW2-KE, attaining strain DW2-KENP. Finally, SAM nucleosidase gene mtnN and SAM decarboxylase gene speD were deleted to block SAM degradation pathways, and bacitracin yield of resultant strain DW2-KENPND reached 957.53 U/mL, increased by 28.97% compared to DW2. Collectively, this study demonstrated that SAM supply served as the critical role in bacitracin synthesis, and a promising strain B. licheniformis DW2-KENPND was attained for industrial production of bacitracin.

Prokaryotic sigma factors and their transcriptional counterparts in Archaea and Eukarya

RNA polymerases (RNAPs) carry out transcription in the three domains of life, Bacteria, Archaea, and Eukarya. Transcription initiation is highly regulated by a variety of transcription factors, whose number and subunit complexity increase during evolution. This process is regulated in Bacteria by the σ factor, while the three eukaryotic RNAPs require a complex set of transcription factors (TFs) and a TATA-binding protein (TBP). The archaeal transcription system appears to be an ancestral version of the eukaryotic RNAPII, requiring transcription factor B (TFB), TBP, and transcription factor E (TFE). The function of the bacterial sigma (σ) factor has been correlated to the roles played by the eukaryotic RNAP II and the archaeal RNAP. In addition, σ factors, TFB, and TFIIB all contain multiple DNA binding helix-turn-helix (HTH) structural motifs; although TFIIB and TFB display two HTH domains, while the bacterial σ factor spans 4 HTH motifs. The sequence similarities and structure alignments of the bacterial σ factor, eukaryotic TFIIB, and archaeal TFB evidence that these three proteins are homologs.Key Points• Transcription initiation is highly regulated by TFs.• Transcription is finely regulated in all domains of life by different sets of TFs.• Specific TFs in Bacteria, Eukarya and Archaea are homologs.

Enhanced production of heterologous proteins via engineering the cell surface of Bacillus licheniformis

Cell surface engineering was proven as the efficient strategy for enhanced production of target metabolites. In this study, we want to improve the yield of target protein by engineering cell surface in Bacillus licheniformis. First, our results confirmed that deletions of d-alanyl-lipoteichoic acid synthetase gene dltD, cardiolipin synthase gene clsA and CDP-diacylglycerol-serine O-phosphatidyltransferase gene pssA were not conducive to cell growth, and the biomass of gene deletion strains were, respectively, decreased by 10.54 ± 1.43%, 14.17 ± 1.51%, and 17.55 ± 1.28%, while the concentrations of total extracellular proteins were improved, due to the increases of cell surface net negative charge and cell membrane permeability. In addition, the activities of target proteins, nattokinase, and α-amylase were also improved significantly in gene deletion strains. Furthermore, the triplicate gene (dltD, clsA, and pssA) deletion strain was constructed, which further led to the 45.71 ± 2.43% increase of cell surface net negative charge and 26.45 ± 2.31% increase of cell membrane permeability, and the activities of nattokinase and α-amylase reached 37.15 ± 0.89 FU/mL and 305.3 ± 8.4 U/mL, increased by 46.09 ± 3.51% and 96.34 ± 7.24%, respectively. Taken together, our results confirmed that cell surface engineering via deleting dltD, clsA, and pssA is an efficient strategy for enhanced production of target proteins, and this research provided a promising host strain of B. licheniformis for efficient protein expression.

Establishment and application of multiplexed CRISPR interference system in Bacillus licheniformis

Bacillus licheniformis has been regarded as an outstanding microbial cell factory for the production of biochemicals and enzymes. Due to lack of genetic tools to repress gene expression, metabolic engineering and gene function elucidation are limited in this microbe. In this study, an integrated CRISPR interference (CRISPRi) system was constructed in B. licheniformis. Several endogenous genes, including yvmC, cypX, alsD, pta, ldh, and essential gene rpsC, were severed as the targets to test this CRISPRi system, and the repression efficiencies were ranged from 45.02 to 94.00%. Moreover, the multiple genes were simultaneously repressed with high efficiency using this CRISPRi system. As a case study, the genes involved in by-product synthetic and L-valine degradation pathways were selected as the silence targets to redivert metabolic flux toward L-valine synthesis. Repression of acetolactate decarboxylase (alsD) and leucine dehydrogenase (bcd) led to 90.48% and 80.09 % increases in L-valine titer, respectively. Compared with the control strain DW9i△leuA (1.47 g/L and 1.79 g/L), the L-valine titers of combinatorial strain DW9i△leuA/pHYi-alsD-bcd were increased by 1.27-fold and 2.89-fold, respectively, in flask and bioreactor. Collectively, this work provides a feasible approach for multiplex metabolic engineering and functional genome studies of B. licheniformis.