ZnO nanowire-based antireflective coatings with double-nanotextured surfaces

Optimization Temperature Programming of Microwave-Assisted Synthesis ZnO Nanoneedle Arrays for Optical and Surface-Enhanced Raman Scattering Applications

This study used a rapid and simple microwave-assisted synthesis method to grow ZnO nanoneedle arrays on the silicon substrate with the ZnO seed layer. The effects of reaction temperature and time on the lengths of ZnO nanoneedle arrays were investigated. The appropriate temperature programming step can grow the longer ZnO nanoneedle arrays at the same reaction time (25 min), which is 2.08 times higher than without the temperature programming step. The geometry of the ZnO nanoneedle arrays features a gradual decrease from the Si substrate to the surface, which provides an excellent progressive refractive index between Si and air, resulting in excellent antireflection properties over an extensive wavelength range. In addition, the ZnO nanoneedle arrays exhibit a suitable structure for uniform deposition of Ag nanoparticles, which can provide three-dimensional hot spots and surface active sites, resulting in higher surface-enhanced Raman scattering (SERS) enhancement, high uniformity, high reusability, and low detection limit for R6G molecule. The ZnO/Ag nanoneedle arrays can also reveal a superior SERS-active substrate detecting amoxicillin (10^-8 M). These results are promising for applying the SERS technique for rapid low-concentration determination in different fields.

Anti-Reflective Coating Materials: A Holistic Review from PV Perspective

The solar photovoltaic (PV) cell is a prominent energy harvesting device that reduces the strain in the conventional energy generation approach and endorses the prospectiveness of renewable energy. Thus, the exploration in this ever-green field is worth the effort. From the power conversion efficiency standpoint of view, PVs are consistently improving, and when analyzing the potential areas that can be advanced, more and more exciting challenges are encountered. One such crucial challenge is to increase the photon availability for PV conversion. This challenge is solved using two ways. First, by suppressing the reflection at the interface of the solar cell, and the other way is to enhance the optical pathlength inside the cell for adequate absorption of the photons. Our review addresses this challenge by emphasizing the various strategies that aid in trapping the light in the solar cells. These strategies include the usage of antireflection coatings (ARCs) and light-trapping structures. The primary focus of this study is to review the ARCs from a PV application perspective based on various materials, and it highlights the development of ARCs from more than the past three decades covering the structure, fabrication techniques, optical performance, features, and research potential of ARCs reported. More importantly, various ARCs researched with different classes of PV cells, and their impact on its efficiency is given a special attention. To enhance the optical pathlength, and thus the absorption in solar PV devices, an insight about the advanced light-trapping techniques that deals with the concept of plasmonics, spectral modification, and other prevailing innovative light-trapping structures approaching the Yablonovitch limit is discussed. An extensive collection of information is presented as tables under each core review section. Further, we take a step forward to brief the effects of ageing on ARCs and their influence on the device performance. Finally, we summarize the review of ARCs on the basis of structures, materials, optical performance, multifunctionality, stability, and cost-effectiveness along with a master table comparing the selected high-performance ARCs with perfect AR coatings. Also, from the discussed significant challenges faced by ARCs and future outlook; this work directs the researchers to identify the area of expertise where further research analysis is needed in near future.

Optical response of electro-tuneable 3D superstructures of plasmonic nanoparticles self-assembling on transparent columnar electrodes

Electrically tuneable, guided self-assembly of plasmonic nanoparticles (NPs) at polarized, patterned solid-liquid interfaces could enable numerous platforms for designing nanoplasmonic optical devices with new tuneable functionalities. Here, we propose a unique design of voltage-controlled guided 3D self-assembly of plasmonic NPs on transparent electrodes, patterned as columnar structures-arrays of vertical nanorods. NP assembly on the electrified surfaces of those columnar structures allows formation of a 3D superstructure of NPs, comprising stacking up of NPs in the voids between the columns, forming multiple NP-layers. A comprehensive theoretical model, based on quasi-static effective medium theory and multilayer Fresnel reflection scheme, is developed and verified against full-wave simulations for obtaining optical responses-reflectance, transmittance, and absorbance-from such systems of 3D self-assembled NPs. With a specific example of small gold nanospheres self-assembling on polarized zinc oxide columns, we show that the reflectance spectrum can be controlled by the number of stacked NP-layers. Numerical simulations show that peak reflectance can be enhanced up to ∼1.7 times, along with spectral broadening by a factor of ∼2-allowing wide-range tuning of optical reflectivity. Smaller NPs with superior mobility would be preferable over large NPs for realizing such devices for novel photonic and sensing applications.

Process Principles for Large-Scale Nanomanufacturing

Nanomanufacturing—the fabrication of macroscopic products from well-defined nanoscale building blocks—in a truly scalable and versatile manner is still far from our current reality. Here, we describe the barriers to large-scale nanomanufacturing and identify routes to overcome them. We argue for nanomanufacturing systems consisting of an iterative sequence of synthesis/assembly and separation/sorting unit operations, analogous to those used in chemicals manufacturing. In addition to performance and economic considerations, phenomena unique to the nanoscale must guide the design of each unit operation and the overall process flow. We identify and discuss four key nanomanufacturing process design needs: (a) appropriately selected process break points, (b) synthesis techniques appropriate for large-scale manufacturing, (c) new structure- and property-based separations, and (d) advances in stabilization and packaging.

ZnO nanowire-enabled light funneling effect for antireflection and light convergence applications

We present a new light trapping technique to reduce reflection loss, as well as for light, focusing at submicron scales for solar cell and image sensing applications. We have fabricated hexagonal arrays of ZnO funnel-like structures on Si substrate by the patterned growth of ZnO nanowires in a hydrothermal growth process. The funnels are optimized so that the effective refractive index along the vertical direction decreases gradually from the Si surface to the top of funnel to reduce Fresnel reflection at a device-air interface. Finite difference time domain simulation is used for optimization of the minimum reflectivity and to analyze optical properties such as angle dependency, polarization dependency, and funneling effect. The structures function similar to a GRIN lens in light trapping and convergence. An optimized structure reduces the average reflectivity close to 3% in the wavelength range of 300-1200 nm with the possibility of confining incident light to a few hundreds of nanometers.

Particle-on-Film Gap Plasmons on Antireflective ZnO Nanocone Arrays for Molecular-Level Surface-Enhanced Raman Scattering Sensors

When semiconducting nanostructures are combined with noble metals, the surface plasmons of the noble metals, in addition to the charge transfer interactions between the semiconductors and noble metals, can be utilized to provide strong surface plasmon effects. Here, we suggest a particle-film plasmonic system in conjunction with tapered ZnO nanowire arrays for ultrasensitive SERS chemical sensors. In this design, the gap plasmons between the metal nanoparticles and the metal films provide significantly improved surface-enhanced Raman spectroscopy (SERS) effects compared to those of interparticle surface plasmons. Furthermore, 3D tapered metal nanostructures with particle-film plasmonic systems enable efficient light trapping and waveguiding effects. To study the effects of various morphologies of ZnO nanostructures on the light trapping and thus the SERS enhancements, we compare the performance of three different ZnO morphologies: ZnO nanocones (NCs), nanonails (NNs), and nanorods (NRs). Finally, we demonstrate that our SERS chemical sensors enable a molecular level of detection capability of benzenethiol (100 zeptomole), rhodamine 6G (10 attomole), and adenine (10 attomole) molecules. This work presents a new design platform based on the 3D antireflective metal/semiconductor heterojunction nanostructures, which will play a critical role in the study of plasmonics and SERS chemical sensors.

Nanoporous Thin Films and Binary Nanoparticle Superlattices Created by Directed Self-Assembly of Block Copolymer Hybrid Materials

The design and development of well-defined, functional nanostructures via self-assembly is one of the key objectives in current nanotechnology. Block copolymer-based hybrid materials are attractive candidates for the fabrication of multifunctional nanostructures, which provide the building blocks for more complex nanoarchitectures and nanodevices. However, one of the major challenges lies in controlling the structure formation in these hybrid materials by guiding the self-assembly of the block copolymer. Here, hierarchical nanoporous structures are fabricated via guided multistep self-assembly of diblock copolymer micellar solutions onto hydrophilic solid substrates. The core of polystyrene-block-poly[4-vinylpyridine] micelles serves as a nanoreactor for the preparation of size-controlled gold nanoparticles. Deposition of thin films of the micellar solution in combination with a nonselective cosolvent (THF), on hydrophilic surfaces leads to the formation of hierarchical nanoporous structures. The micellar films exhibit two different pore diameters and a total pore density of more than 10(10) holes per cm2. Control over the pore diameter is achieved by adapting the molecular weight of the polystyrene-block-poly[4-vinylpyridine] diblock copolymer. Moreover, the porous morphology is used as a template for the fabrication of bimetallic nanostructured thin films. The PS-b-P4VP template is subsequently removed by oxygen plasma etching, leaving behind binary nanoparticle structures that mimic the original thin film morphology.