Synthesis of a fluorescent analog of polychlorinated biphenyls for use in a continuous flow immunosensor assay

Immunoaffinity chromatography: an introduction to applications and recent developments

Immunoaffinity chromatography (IAC) combines the use of LC with the specific binding of antibodies or related agents. The resulting method can be used in assays for a particular target or for purification and concentration of analytes prior to further examination by another technique. This review discusses the history and principles of IAC and the various formats that can be used with this method. An overview is given of the general properties of antibodies and of antibody-production methods. The supports and immobilization methods used with antibodies in IAC and the selection of application and elution conditions for IAC are also discussed. Several applications of IAC are considered, including its use in purification, immunodepletion, direct sample analysis, chromatographic immunoassays and combined analysis methods. Recent developments include the use of IAC with CE or MS, ultrafast immunoextraction methods and the use of immunoaffinity columns in microanalytical systems.

Controlling binding site densities on glass surfaces

The density of surface-immobilized ligands or binding sites is an important issue for the development of sensors, array- or chip-based assays, and single-molecule detection methods. The goal of this research is to control the binding site density of reactive ligands on surfaces by diluting surface amine groups in self-assembled and cross-linked monolayers on glass prepared from solutions containing very low concentrations of (3-aminopropyl)triethoxysilane (APTES) and much higher concentrations of (2-cyanoethyl)triethoxysilane. The surface amine sites are suitable for attaching labels and ligands by reaction with succinimidyl ester reagents. Labeling the amine sites with fluorescent molecules and imaging the single molecules with fluorescence microscopy provides a means of determining the density of amine sites on the surface, which were incorporated into the self-assembled monolayer with micrometer spacings in proportion to the concentration of APTES in the synthesis. Biotin ligands were also bound to these surface amine sites using a succinimidyl ester linker, and the immobilized biotin was then reacted with either streptavidin-conjugated gold colloid particles or fluorescently labeled neutravidin. Imaging of these samples yields consistent amine and biotin site coverages, indicating that quantitative control and chemical conversion of binding sites can be achieved at very low (<10(-7)) fractions of a monolayer.

Dioxin-Binding Pentapeptide for Use in a High-Sensitivity On-Bead Detection Assay

The purpose of this study is to develop a dioxin detection method using a short peptide alternative to an immunoantibody. A full peptide library consisting of 2.5 million possible amino acid combinations was constructed by a solid-phase split synthesis approach using 19 natural amino acids. The peptide beads were subjected to a competitive binding assay between 2,3,7-trichlorodibenzo-p-dioxin and N-NBD-3-(3',4'-dichlorophenoxy)-1-propylamine (NBD-DCPPA) in a buffer containing 20% 1,4-dioxane. Two almost identical pentapeptides, FLDQI and FLDQV, that could bind dioxin were screened from the combinatorial library. NBD-DCPPA and the peptide synthesized on resin beads could be utilized to determine dioxin concentrations. The fluorescence intensity of the beads was measured using fluorescence microscopy to make a calibration curve for the dioxin concentrations. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (2,3,7,8-TeCDD) could also detected in the presence of 30% 1,4-dioxane. To optimize the peptide sequence, a one-amino acid-substituted library was prepared using amino acids including nonnatural amino acids. The internal amino acids, LDQ, could not be substituted by any other amino acids. This result indicates that these three side chains are essential to recognize dioxins. The peptide C terminus substituted by phenylglycine showed a 10 times lower detection limit of 2,3,7,8-TeCDD of 150 pM (50 pg/mL) than the original sequence FLDQV. The cross reactivity of the dioxin binding peptides including the secondary derivatives was investigated. Some polycyclic aromatic hydrocarbons bound to the peptide beads, but nonchlorinated dibenzo-p-dioxin and PCB did not. From these results, we demonstrate the potential of short peptides as a practical sensor material targeting low molecular weight compounds such as dioxin.

Polychlorinated biphenyls (PCBs) detection in food samples using an electrochemical immunosensor

In this work, a disposable electrochemical immunosensor, based on a competitive assay scheme, was applied to detect polychlorinated biphenyls (PCBs) in food. For this purpose, antibodies against PCBs were directly immobilized onto the carbon surface of a disposable screen-printed electrode. A competition between the PCBs present in the sample and a fixed concentration of an enzyme-labeled PCB was realized and evaluated by electrochemical detection. Alkaline phosphatase was used as the enzyme label, coupled with differential pulse voltammetry (DPV) as the electrochemical technique. The immunosensor was tested on aroclor mixture detection (1242 and 1248) and then on some typologies of food samples to evaluate the possible application for real sample analysis. Samples analyzed were from different matrixes, such as sheep milk, bovine adipose tissue, and bovine muscle. Results obtained were compared with the accredited results according to ISO 17025 methods for PCB detection (HRGC-LRMS) as a confirmatory analysis. Preliminary results show the possibility to use this device as a screening method in food sample analysis. The negligible matrix effect observed may lead to a simplified extraction procedure, and considerable time and consumable savings are the immediate benefits given by the proposed method.

Immunosensors--principles and applications to clinical chemistry

INTRODUCTION

Immunosensors are affinity ligand-based biosensor solid-state devices in which the immunochemical reaction is coupled to a transducer. The fundamental basis of all immunosensors is the specificity of the molecular recognition of antigens by antibodies to form a stable complex. This is similar to the immunoassay methodology. Immunosensors can be categorized based on the detection principle applied. The main developments are electrochemical, optical, and microgravimetric immunosensors. In contrast to immunoassay, modern transducer technology enables the label-free detection and quantification of the immune complex.

METHODS

The analysis of trace substances in environmental science, pharmaceutical and food industries is a challenge since many of these applications demand a continuous monitoring mode. The use of immunosensors in these applications is most appropriate. Similarly, a series of clinical problems may be solved by continuous monitoring of certain analytes.

CONCLUSIONS

Clinical chemists should take advantage of immunosensors in clinical diagnostics. There are many recent developments in the immunosensor field which have potential impacts. The future role of this technique in intralaboratory, as well as bedside testing, will become even more important as the clinical laboratory is faced with increasing pressure to contain costs.