Investigation of Polymer and Nanoparticle Properties with Nicotinic Acid and p-Aminobenzoic Acid Grafted on Poly(ε-caprolactone)-Poly(ethylene glycol)-Poly(ε-caprolactone) via Click Chemistry

Synthesis and Self-Assembly of the pH-Responsive Anionic Copolymers for Enhanced Doxorubicin-Loading Capacity

Polyelectrolyte complex micelles self-assembled from an ionic polymer and oppositely charged small molecules are a promising drug delivery system. In this study, the anionic block copolymers composed of poly(ethylene glycol), poly(ε-caprolactone), and carboxyl modified poly(ε-caprolactone), COOH-PCEC, were designed to encapsulate doxorubicin (DOX) via electrostatic and hydrophobic interactions to form spherical micelles with a particle size of 90-140 nm. The higher payload capacity of these micelles than noncharged micelles of PCL-poly(ethylene glycol)-PCL (PCEC) was achieved, and it was strongly dependent on the composition of the micelles. In vitro drug release studies showed that the release of DOX from the micelles was faster at pH 5.5 than at pH 7.4, which was mainly due to the protonation of carboxyl groups and the solubility of DOX. Studies of intracellular uptake demonstrated that the DOX-loaded micelles could be internalized effectively by HeLa cells. In vitro cytotoxicity revealed that the blank COOH-PCEC micelles had a low cytotoxicity against both L929 and HeLa cells. However, the DOX-loaded micelles inhibited the growth of HeLa cells remarkably, demonstrating their potential for use as an efficient carrier for the delivery of DOX.

Investigation of cationized triblock and diblock poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers for oral delivery of enoxaparin: In vitro approach

In this study, poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers grafted with a cationic ligand, propargyltrimethyl ammonium iodide (PTA), to fabricate the cationized triblock (P(CatCLCL)₂-PEG) and diblock (P(CatCLCL)-mPEG) copolymers were investigated their potential use for oral delivery of enoxaparin (ENX). Influences of various PTA contents and different structures of the copolymers on molecular characteristics, ENX encapsulation, particle characteristics, and capability of drug transport across Caco-2 cells were elucidated. The results showed that P(CatCLCL)₂-PEG and P(CatCLCL)-mPEG copolymers self-aggregated and encapsulated ENX into spherical particles of ∼200-450nm. The increasing amount of PTA on the copolymers increased encapsulation efficiency of over 90%. The ENX release from both types of the cationized copolymer particles was pH-dependent which was retarded at pH 1.2 and accelerated at pH 7.4, supporting the drug protection in the acidic environment and possible release in the blood circulation. The toxicity of ENX-loaded particles on Caco-2 cells decreased when decreasing the amount of PTA. The triblock and diblock particles dramatically enhanced ENX uptake and transport across Caco-2 cells as compared to the ENX solution. However, the different structures of the copolymers slightly affected ENX transport. These results suggested that P(CatCLCL)₂-PEG and P(CatCLCL)-mPEG copolymers would be potential carriers for oral delivery of ENX.

STATEMENT OF SIGNIFICANCE

The anionic drugs such as proteins, peptides or polysaccharides are generally administered via invasive route causing patient incompliance and high cost of hospitalization. The development of biomaterials for non-invasive delivery of those drugs has gained much attention, especially for oral delivery. However, they have limitation due to non-biocompatibility and poor drug bioavailability. In this study, the novel poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers grafted with propargyltrimethyl ammonium iodide, a small cationic ligand, were introduced to use as a carrier for oral delivery of enoxaparin, a highly negatively charged drug. The study showed that these cationized copolymers could achieve high enoxaparin entrapment efficiency, protect drug release in an acidic environment and enhance enoxaparin permeability across Caco-2 cells, the intestinal cell model. These characteristics of the cationized copolymers make them a potential candidate for oral delivery of anionic drugs for biomaterial applications.

Properties of acyl modified poly(glycerol-adipate) comb-like polymers and their self-assembly into nanoparticles

There is an increasing need to develop bio-compatible polymers with an increased range of different physicochemical properties. Poly(glycerol-adipate) (PGA) is a biocompatible, biodegradable amphiphilic polyester routinely produced from divinyl adipate and unprotected glycerol by an enzymatic route, bearing a hydroxyl group that can be further functionalized. Polymers with an average Mn of ∼13 kDa can be synthesized without any post-polymerization deprotection reactions. Acylated polymers with fatty acid chain length of C4, C8, and C18 (PGAB, PGAO, and PGAS, respectively) at different degrees of substitution were prepared. These modifications yield comb-like polymers that modulate the amphiphilic characteristics of PGA. This novel class of biocompatible polymers has been characterized through various techniques such as FT-IR, 1H NMR, surface, thermal analysis, and their ability to self-assemble into colloidal structures was evaluated by using DLS. The highly tunable properties of PGA reported herein demonstrate a biodegradable polymer platform, ideal for engineering solid dispersions, nanoemulsions, or nanoparticles for healthcare applications. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 3267-3278.

Comparison of poly(ε-caprolactone) chain lengths of poly(ε-caprolactone)-co-d-α-tocopheryl-poly(ethylene glycol) 1000 succinate nanoparticles for enhancement of quercetin delivery to SKBR3 breast cancer cells

This study aimed to investigate the effect of the different hydrophobic chain lengths of poly(ε-caprolactone)-co-d-α-tocopheryl polyethylene glycol 1000 succinate (P(CL)-TPGS) copolymers on the nanoparticle properties and delivery efficiency of quercetin to SKBR3 breast cancer cells. The 5:1, 10:1 and 20:1 P(CL)-TPGS copolymers were fabricated and found to be composed of 25.0%, 45.2% and 66.8% of hydrophobic P(CL) chains with respect to the polymer chain, respectively. The DSC measurement indicated the microphase separation of P(CL) and TPGS segments. The crystallization of P(CL) segment occurred when the P(CL) chain was higher than 25% due to the restricted mobility of P(CL) by TPGS. The longer P(CL) chain had the higher crystallinity while decreasing the crystallinity of TPGS segment. The increasing P(CL) chain length increased the particle size of P(CL)-TPGS nanoparticles from 20 to 205 nm and enhanced the loading capacity of quercetin due to the more hydrophobicity of the nanoparticle core. The release of quercetin was retarded by an increase in P(CL) chain length associated with the increasing hydrophobicity and crystallinity of P(CL)-TPGS copolymers. The P(CL)-TPGS nanoparticles potentiated the toxicity of quercetin to SKBR3 cells by at least 2.9 times compared to the quercetin solution. The cellular uptake of P(CL)-TPGS nanoparticles by SKBR3 cells occurred through cholesterol-dependent endocytosis. The 10:1 P(CL)-TPGS nanoparticles showed the highest toxicity and uptake efficiency and could be potentially used for the delivery of quercetin to breast cancer cells.

Recent developments in micellar drug carriers featuring substituted poly(ε-caprolactone)s

Synthetic modification of caprolactone monomers and polymers provides a route to self-assembling block copolymers for use in drug carrier applications.

Modification of PEG-b-PCL block copolymer with high melting temperature by the enhancement of POSS crystal and ordered phase structure

Alkyne-functionalized polyhedral oligomeric silsesquioxane was successfully prepared and further used to modify PEG-b-PCL via click chemistry, resulting in a successful synthesis of POSS grafted PEG-b-PCL.

Lipase-catalyzed synthesis of azido-functionalized aliphatic polyesters towards acid-degradable amphiphilic graft copolymers

A series of novel aliphatic polyesters with azido functional groups were synthesized via the direct lipase-catalyzed polycondensation of dialkyl diester, diol and 2-azido-1,3-propanediol (azido glycerol) using immobilized lipase B from Candida antarctica (CALB). The effects of polymerization conditions including reaction time, temperature, enzyme amount, substrates and monomer feed ratio on the molecular weights of the products were studied. The polyesters with pendant azido groups were characterized by (1)H NMR, (13)C NMR, 2D NMR, FTIR, GPC and DSC. Alkyne end-functionalized poly(ethylene glycol) containing a cleavable acetal group was then grafted onto the polyester backbone by copper-catalyzed azide-alkyne cycloaddition (CuAAC, click chemistry). Using fluorescence spectroscopy, dynamic light scattering (DLS) and transmission electron microscopy (TEM), these amphiphilic graft copolymers were found to readily self-assemble into nanosized micelles in aqueous solution with critical micelle concentrations between 0.70 and 1.97 mg L(-1), and micelle sizes from 20-70 nm. The degradation of these polymers under acidic conditions was investigated by GPC and (1)H NMR spectroscopy. Cell cytotoxicity tests indicated that the micelles had no apparent cytotoxicity to Bel-7402 cells, suggesting their potential as carriers for controlled drug delivery.