X-ray structure and site-directed mutagenesis of a nitrite reductase from Alcaligenes faecalis S-6: roles of two copper atoms in nitrite reduction

Global patterns in gene content of soil microbiomes emerge from microbial interactions

Microbial metabolism sustains life on Earth. Sequencing surveys of communities in hosts, oceans, and soils have revealed ubiquitous patterns linking the microbes present, the genes they possess, and local environmental conditions. One prominent explanation for these patterns is environmental filtering: local conditions select strains with particular traits. However, filtering assumes ecological interactions do not influence patterns, despite the fact that interactions can and do play an important role in structuring communities. Here, we demonstrate the insufficiency of the environmental filtering hypothesis for explaining global patterns in topsoil microbiomes. Using denitrification as a model system, we find that the abundances of two characteristic genotypes trade-off with pH; nar gene abundances increase while nap abundances decrease with declining pH. Contradicting the filtering hypothesis, we show that strains possessing the Nar genotype are enriched in low pH conditions but fail to grow alone. Instead, the dominance of Nar genotypes at low pH arises from an ecological interaction with Nap genotypes that alleviates nitrite toxicity. Our study provides a roadmap for dissecting how global associations between environmental variables and gene abundances arise from environmentally modulated community interactions.

Role of distal arginine residue in the mechanism of heme nitrite reductases

Heme nitrite reductases reduce NO₂^- by 1e^-/2H⁺ to NO or by 6e^-/8H⁺ to NH₄⁺ which are key steps in the global nitrogen cycle. Second-sphere residues, such as arginine (with a guanidine head group), are proposed to play a key role in the reaction by assisting substrate binding and hydrogen bonding and by providing protons to the active site for the reaction. The reactivity of an iron porphyrin with a NO₂^- covalently attached to a guanidinium arm in its 2nd sphere was investigated to understand the role of arginine residues in the 2nd sphere of heme nitrite reductases. The presence of the guanidinium residue allows the synthetic ferrous porphyrin to reduce NO₂^- and produce a ferrous nitrosyl species ({FeNO}⁷), where the required protons are provided by the guanidinium group in the 2nd sphere. However, in the presence of additional proton sources in solution, the reaction of ferrous porphyrin with NO₂^- results in the formation of ferric porphyrin and the release of NO. Spectroscopic and kinetic data indicated that re-protonation of the guanidine group in the 2nd sphere by an external proton source causes NO to dissociate from a ferric nitrosyl species ({FeNO}⁶) at rates similar to those observed for enzymatic sites. This re-protonation of the guanidine group mimics the proton recharge mechanism in the active site of NiR. DFT calculations indicated that the lability of the Fe-NO bond in the {FeNO}⁶ species is derived from the greater binding affinity of anions (e.g. NO₂^-) to the ferric center relative to neutral NO due to hydrogen bonding and electrostatic interaction of these bound anions with the protonated guanidium group in the 2nd sphere. The reduced {FeNO}⁷ species, once formed, is not affected significantly by the re-protonation of the guanidine residue. These results provide direct insight into the role of the 2nd sphere arginine residue present in the active sites of heme-based NiRs in determining the fate of NO₂^- reduction. Specifically, the findings using the synthetic model suggest that rapid re-protonation of these arginine residues may trigger the dissociation of NO from the {FeNO}⁶, which may also be the case in the protein active site.

Does the aging behavior of microplastics affect the process of denitrification by the difference of copper ion adsorption?

Riparian sediment is a hot zone for denitrification that can withhold copper and microplastics (MPs) from outside. It has been proven that MPs affect denitrification and the existing forms of copper in the environment. However, the impact of copper on sediment denitrification under exposure to MPs remains unclear. This study revealed the response of sediment denitrification to copper availability under the adsorption of MPs and the complexation of MP-derived dissolved organic matter (DOM). These results showed that MP accumulation inhibited denitrification. However, aged MPs increased the activity of nitrite reductase (12.64%), nitrogen dioxide reductase (37.68%), and electron transport (28.93%) compared with pristine MPs. The aging behavior of MPs alleviated 28.18% nitrite accumulation and 16.41-118.35% nitrous oxide emissions. Thus, the aging behavior of MPs alleviated the inhibition of denitrification. Notably, we resolved the copper ion adsorption and complexation by MPs, MP-derived DOM contributed to the denitrification process, and we found that the key nitrogen removal factors were affected by K_L, K_M, and K₂. These results fill a gap in our understanding of biochemical synthesis of MPs during denitrification. Furthermore, it can be used to build a predictive understanding of the long-term effects of MPs on the sediment nitrogen cycle.

Electrochemical Generation of Nitric Oxide for Medical Applications

Over the past 30 years, the significance of nitric oxide (NO) has become increasingly apparent in mammalian physiology. It is biosynthesized by three isoforms of nitric oxide synthases (NOS): neuronal (nNOS), endothelial (eNOS), and inducible (iNOS). Neuronal and eNOS both produce low levels of NO (nM) as a signaling agent and vasodilator, respectively. Inducible (iNOS) is present in activated macrophages at sites of infection to generate acutely toxic (μM) levels of NO as part of the mammalian immune defense mechanism. These discoveries have led to numerous animal and clinical studies to evaluate the potential therapeutic utility of NO in various medical operations/treatments, primarily using NO gas (via gas-cylinders) as the NO source. In this review, we focus specifically on recent advances in the electrochemical generation of NO (E-NOgen) as an alternative means to generate NO from cheap and inert sources, and the fabrication and testing of biomedical devices that utilize E-NOgen to controllably generate NO for medical applications.

Genomic structure predicts metabolite dynamics in microbial communities

The metabolic activities of microbial communities play a defining role in the evolution and persistence of life on Earth, driving redox reactions that give rise to global biogeochemical cycles. Community metabolism emerges from a hierarchy of processes, including gene expression, ecological interactions, and environmental factors. In wild communities, gene content is correlated with environmental context, but predicting metabolite dynamics from genomes remains elusive. Here, we show, for the process of denitrification, that metabolite dynamics of a community are predictable from the genes each member of the community possesses. A simple linear regression reveals a sparse and generalizable mapping from gene content to metabolite dynamics for genomically diverse bacteria. A consumer-resource model correctly predicts community metabolite dynamics from single-strain phenotypes. Our results demonstrate that the conserved impacts of metabolic genes can predict community metabolite dynamics, enabling the prediction of metabolite dynamics from metagenomes, designing denitrifying communities, and discovering how genome evolution impacts metabolism.

A periplasmic cupredoxin with a green CuT1.5 center is involved in bacterial copper tolerance

The importance of copper resistance pathways in pathogenic bacteria is now well recognized, since macrophages use copper to fight bacterial infections. Additionally, considering the increase of antibiotic resistance, growing attention is given to the antimicrobial properties of copper. It is of primary importance to understand how bacteria deal with copper. The Cu-resistant cuproprotein CopI is present in many human bacterial pathogens and environmental bacteria and crucial under microaerobiosis (conditions for most pathogens to thrive within their host). Hence, understanding its mechanism of function is essential. CopI proteins share conserved histidine, cysteine, and methionine residues that could be ligands for different copper binding sites, among which the cupredoxin center could be involved in the protein function. Here, we demonstrated that Vibrio cholerae and Pseudomonas aeruginosa CopI restore the Cu-resistant phenotype in the Rubrivivax gelatinosus ΔcopI mutant. We identified that Cys125 (ligand in the cupredoxin center) and conserved histidines and methionines are essential for R. gelatinosus CopI (RgCopI) function. We also performed spectroscopic analyses of the purified RgCopI protein and showed that it is a green cupredoxin able to bind a maximum of three Cu(II) ions: (i) a green Cu site (CuT1.5), (ii) a type 2 Cu binding site (T2) located in the N-terminal region, and (iii) a third site with a yet unidentified location. CopI is therefore one member of the poorly described CuT1.5 center cupredoxin family. It is unique, since it is a single-domain cupredoxin with more than one Cu site involved in Cu resistance.

Nitrite reductase activity within an antiparallel de novo scaffold

Copper nitrite reductase (CuNiR) is a copper enzyme that converts nitrite to nitric oxide and is an important part of the global nitrogen cycle in bacteria. The relatively simple CuHis₃ binding site of the CuNiR active site has made it an enticing target for small molecule modeling and de novo protein design studies. We have previously reported symmetric CuNiR models within parallel three stranded coiled coil systems, with activities that span a range of three orders of magnitude. In this report, we investigate the same CuHis₃ binding site within an antiparallel three helical bundle scaffold, which allows the design of asymmetric constructs. We determine that a simple CuHis₃ binding site can be designed within this scaffold with enhanced activity relative to the comparable construct in parallel coiled coils. Incorporating more complex designs or repositioning this binding site can decrease this activity as much as 15 times. Comparing these constructs, we reaffirm a previous result in which a blue shift in the 1s to 4p transition energy determined by Cu(I) X-ray absorption spectroscopy is correlated with an enhanced activity within imidazole-based constructs. With this step and recent successful electron transfer site designs within this scaffold, we are one step closer to a fully functional de novo designed nitrite reductase.

In Silico Analysis of the Enzymes Involved in Haloarchaeal Denitrification

During the last century, anthropogenic activities such as fertilization have led to an increase in pollution in many ecosystems by nitrogen compounds. Consequently, researchers aim to reduce nitrogen pollutants following different strategies. Some haloarchaea, owing to their denitrifier metabolism, have been proposed as good model organisms for the removal of not only nitrate, nitrite, and ammonium, but also (per)chlorates and bromate in brines and saline wastewater. Bacterial denitrification has been extensively described at the physiological, biochemical, and genetic levels. However, their haloarchaea counterparts remain poorly described. In previous work the model structure of nitric oxide reductase was analysed. In this study, a bioinformatic analysis of the sequences and the structural models of the nitrate, nitrite and nitrous oxide reductases has been described for the first time in the haloarchaeon model Haloferax mediterranei. The main residues involved in the catalytic mechanism and in the coordination of the metal centres have been explored to shed light on their structural characterization and classification. These results set the basis for understanding the molecular mechanism for haloarchaeal denitrification, necessary for the use and optimization of these microorganisms in bioremediation of saline environments among other potential applications including bioremediation of industrial waters.

Neutron crystallography for the elucidation of enzyme catalysis

Hydrogen atoms and hydration water molecules in proteins are indispensable for many biochemical processes, especially enzymatic catalysis. The locations of hydrogen atoms in proteins are usually predicted based on X-ray structures, but it is still very difficult to know the ionization states of the catalytic residues, the hydration structure of the protein, and the characteristics of hydrogen-bonding interactions. Neutron crystallography allows the direct observation of hydrogen atoms that play crucial roles in molecular recognition and the catalytic reactions of enzymes. In this review, we present the current status of neutron crystallography in structural biology and recent neutron structural analyses of three enzymes: ascorbate peroxidase, the main protease of severe acute respiratory syndrome coronavirus 2, and copper-containing nitrite reductase.

Remote Water-Mediated Proton Transfer Triggers Inter-Cu Electron Transfer: Nitrite Reduction Activation in Copper-Containing Nitrite Reductase

The copper-containing nitrite reductase (CuNiR) catalyzes the biological conversion of nitrite to nitric oxide; key long-range electron/proton transfers are involved in the catalysis. However, the details of the electron-/proton-transfer mechanism are still unknown. In particular, the driving force of the electron transfer from the type-1 copper (T1Cu) site to the type-2 copper (T2Cu) site is ambiguous. Here, we explored the two possible proton-transfer channels, the high-pH proton channel and the primary proton channel, by using two-layered ONIOM calculations. Our calculation results reveal that the driving force for electron transfer from T1Cu to T2Cu comes from a remote water-mediated triple-proton-coupled electron-transfer mechanism. In the high-pH proton channel, the water-mediated triple-proton transfer occurs from Glu113 to an intermediate water molecule, whereas in the primary channel, the transfer is from Lys128 to His260. Subsequently, the two channels employ another two or three distinct proton-transfer steps to deliver the proton to the nitrite substrate at the T2Cu site. These findings explain the detailed proton-/electron-transfer mechanisms of copper-containing nitrite reductase and could extend our understanding of the diverse proton-coupled electron-transfer mechanisms in complicated proteins.

Heterologous production and functional characterization of Bradyrhizobium japonicum copper-containing nitrite reductase and its physiological redox partner cytochrome c550

Two domain copper-nitrite reductases (NirK) contain two types of copper centers, one electron transfer (ET) center of type 1 (T1) and a catalytic site of type 2 (T2). NirK activity is pH-dependent, which has been suggested to be produced by structural modifications at high pH of some catalytically relevant residues. To characterize the pH-dependent kinetics of NirK and the relevance of T1 covalency in intraprotein ET, we studied the biochemical, electrochemical, and spectroscopic properties complemented with QM/MM calculations of Bradyrhizobium japonicum NirK (BjNirK) and of its electron donor cytochrome c550 (BjCycA). BjNirK presents absorption spectra determined mainly by a S(Cys)3pπ → Cu2+ ligand-to-metal charge-transfer (LMCT) transition. The enzyme shows low activity likely due to the higher flexibility of a protein loop associated with BjNirK/BjCycA interaction. Nitrite is reduced at high pH in a T1-decoupled way without T1 → T2 ET in which proton delivery for nitrite reduction at T2 is maintained. Our results are analyzed in comparison with previous results found by us in Sinorhizobium meliloti NirK, whose main UV-vis absorption features are determined by S(Cys)3pσ/π → Cu2+ LMCT transitions.

Catalysis and Electron Transfer in De Novo Designed Helical Scaffolds

The relationship between protein structure and function is one of the greatest puzzles within biochemistry. De novo metalloprotein design is a way to wipe the board clean and determine what is required to build in function from the ground up in an unrelated structure. This Review focuses on protein design efforts to create de novo metalloproteins within alpha-helical scaffolds. Examples of successful designs include those with carbonic anhydrase or nitrite reductase activity by incorporating a ZnHis3 or CuHis3 site, or that recapitulate the spectroscopic properties of unique electron-transfer sites in cupredoxins (CuHis2 Cys) or rubredoxins (FeCys4 ). This work showcases the versatility of alpha helices as scaffolds for metalloprotein design and the progress that is possible through careful rational design. Our studies cover the invariance of carbonic anhydrase activity with different site positions and scaffolds, refinement of our cupredoxin models, and enhancement of nitrite reductase activity up to 1000-fold.

Heteromeric three-stranded coiled coils designed using a Pb(II)(Cys)3 template mediated strategy

Three-stranded coiled coils are peptide structures constructed from amphipathic heptad repeats. Here we show that it is possible to form pure heterotrimeric three-stranded coiled coils by combining three distinct characteristics: (1) a cysteine sulfur layer for metal coordination, (2) a thiophilic, trigonal pyramidal metalloid (Pb(II)) that binds to these sulfurs and (3) an adjacent layer of reduced steric bulk generating a cavity where water can hydrogen bond to the cysteine sulfur atoms. Cysteine substitution in an a site yields Pb(II)A₂B heterotrimers, while d sites provide pure Pb(II)C₂D or Pb(II)CD₂ scaffolds. Altering the metal from Pb(II) to Hg(II) or shifting the relative position of the sterically less demanding layer removes heterotrimer specificity. Because only two of the eight or ten hydrophobic layers are perturbed, catalytic sites can be introduced at other regions of the scaffold. A Zn(II)(histidine)₃(H₂O) centre can be incorporated at a remote location without perturbing the heterotrimer selectivity, suggesting a unique strategy to prepare dissymmetric catalytic sites within self-assembling de novo-designed proteins.

High-resolution neutron crystallography visualizes an OH-bound resting state of a copper-containing nitrite reductase

X-ray crystallography often fails to determine the positions of hydrogen atoms, which play crucial roles in enzymatic reactions. Despite many X-ray crystallographic studies, the reaction mechanism of copper-containing nitrite reductases (CuNIRs), which reduce nitrite using two protons, has been controversial. The high-resolution neutron structure of a CuNIR reveals the protonation states of catalytic residues and key water molecules, thus providing insights into the catalytic mechanism. The catalytic Cu is shown to be coordinated by a hydroxide ion and not water. Furthermore, the hydrogen-deuterium exchange ratio suggests that intramolecular electron transfer is involved in a hydrogen-bond jump. These observations are consistent with previous computational chemistry; therefore, our study forms a bridge between the structural biology and quantum chemistry of CuNIRs.

Copper-containing nitrite reductases (CuNIRs) transform nitrite to gaseous nitric oxide, which is a key process in the global nitrogen cycle. The catalytic mechanism has been extensively studied to ultimately achieve rational control of this important geobiochemical reaction. However, accumulated structural biology data show discrepancies with spectroscopic and computational studies; hence, the reaction mechanism is still controversial. In particular, the details of the proton transfer involved in it are largely unknown. This situation arises from the failure of determining positions of hydrogen atoms and protons, which play essential roles at the catalytic site of CuNIRs, even with atomic resolution X-ray crystallography. Here, we determined the 1.50 Å resolution neutron structure of a CuNIR from Geobacillus thermodenitrificans (trimer molecular mass of ∼106 kDa) in its resting state at low pH. Our neutron structure reveals the protonation states of catalytic residues (deprotonated aspartate and protonated histidine), thus providing insights into the catalytic mechanism. We found that a hydroxide ion can exist as a ligand to the catalytic Cu atom in the resting state even at a low pH. This OH-bound Cu site is unexpected from previously given X-ray structures but consistent with a reaction intermediate suggested by computational chemistry. Furthermore, the hydrogen-deuterium exchange ratio in our neutron structure suggests that the intramolecular electron transfer pathway has a hydrogen-bond jump, which is proposed by quantum chemistry. Our study can seamlessly link the structural biology to the computational chemistry of CuNIRs, boosting our understanding of the enzymes at the atomic and electronic levels.

QM/MM MD simulations reveal an asynchronous PCET mechanism for nitrite reduction by copper nitrite reductase

The nitrite reduction in copper nitrite reductase is found to proceed through an asynchronous proton-coupled electron transfer (PCET) mechanism, with electron transfer from T1-Cu to T2-Cu preceding the proton transfer from Asp98 to nitrite.

Noncoded Amino Acids in de Novo Metalloprotein Design: Controlling Coordination Number and Catalysis

The relationship between structure and function has long been one of the major points of investigation in Biophysics. Understanding how much, or how little, of a protein's often complicated structure is necessary for its function can lead to directed therapeutic strategies and would allow one to design proteins for specific desired functions. Studying protein function by de novo design builds the functionality from the ground up in a completely unrelated and noncoded protein scaffold. Our lab has used this strategy to study heavy and transition metal binding within the TRI family of three stranded coiled coil (3SCC) constructs to understand coordination geometry and metalloenzyme catalytic control within a protein environment. These peptides contain hydrophobic layers within the interior of the 3SCC, which one can mutate to metal binding residues to create a minimal metal binding site, while solid phase synthesis allows our lab to easily incorporate a number of noncoded amino acids including d enantiomers of binding or secondary coordination sphere amino acids, penicillamine, or methylated versions of histidine. Our studies of Cd(II) binding to Cys₃ environments have determined, largely through the use of ¹¹³Cd NMR and ^111mCd PAC, that the coordination environment around a heavy metal can be controlled by incorporating noncoded amino acids in either the primary or secondary coordination spheres. We found mutating the metal binding amino acids to l-Pen can enforce trigonal Cd(II)S₃ geometry exclusively compared to the mixed coordination determined for l-Cys coordination. The same result can be achieved with secondary sphere mutations as well by incorporating d-Leu above a Cys₃. We hypothesize this latter effect is due to the increased steric packing above the metal binding site that occurs when the l-Leu oriented toward the N-terminus of the scaffold is mutated to d-Leu and oriented toward the C-terminus. Mutating the layer below Cys₃ to d-Leu instead formed a mixed 4- and 5-coordinate Cd(II)S₃(H₂O) and Cd(II)S₃(H₂O)₂ construct as steric bulk was decreased below the metal binding site. We have also applied noncoded amino acids to metalloenzyme systems by incorporating His residues that are methylated at the δ- or ε-nitrogen to enforce Cu(I) ligation to the opposite open nitrogen of His and found a 2 orders of magnitude increased catalytic efficiency for nitrite reductase activity with ε-nitrogen coordination compared to δ-nitrogen. These results exemplify the ability to tune coordination environment and catalytic efficiency within a de novo scaffold as well as the utility of noncoded amino acids to increase the chemist's toolbox. By furthering our understanding of metalloprotein design one could envision, through our use of amino acids not normally available to nature, that protein design laboratories will soon be capable of outperforming the native systems previously used as their benchmark of successful design. The ability to design proteins at this level would have far reaching and exciting benefits within various fields including medical and industrial applications.

Methylated Histidines Alter Tautomeric Preferences that Influence the Rates of Cu Nitrite Reductase Catalysis in Designed Peptides

Copper proteins have the capacity to serve as both redox active catalysts and purely electron transfer centers. A longstanding question in this field is how the function of histidine ligated Cu centers are modulated by δ vs ε-nitrogen ligation of the imidazole. Evaluating the impact of these coordination modes on structure and function by comparative analysis of deposited crystal structures is confounded by factors such as differing protein folds and disparate secondary coordination spheres that make direct comparison of these isomers difficult. Here, we present a series of de novo designed proteins using the noncanonical amino acids 1-methyl-histidine and 3-methyl-histidine to create Cu nitrite reductases where δ- or ε-nitrogen ligation is enforced by the opposite nitrogen's methylation as a means of directly comparing these two ligation states in the same protein fold. We find that ε-nitrogen ligation allows for a better nitrite reduction catalyst, displaying 2 orders of magnitude higher activity than the δ-nitrogen ligated construct. Methylation of the δ nitrogen, combined with a secondary sphere mutation we have previously published, has produced a new record for efficiency within a homogeneous aqueous system, improving by 1 order of magnitude the previously published most efficient construct. Furthermore, we have measured Michaelis-Menten kinetics on these highly active constructs, revealing that the remaining barriers to matching the catalytic efficiency ( kcat/ KM) of native Cu nitrite reductase involve both substrate binding ( KM) and catalysis ( kcat).

Development of de Novo Copper Nitrite Reductases: Where We Are and Where We Need To Go

The development of redox-active metalloprotein catalysts is a challenging objective of de novo protein design. Within this Perspective we detail our efforts to create a redox-active Cu nitrite reductase (NiR) by incorporating Cu into the hydrophobic interior of well-defined three-stranded coiled coils (3SCCs). The scaffold contains three histidine residues that provide a layer of three nitrogen donors that mimic the type 2 catalytic site of NiR. We have found that this strategy successfully produces an active and stable CuNiR model that functions for over 1000 turnovers. Spectroscopic evidence indicates that the Cu(I) site has a lower coordination number in comparison to the enzyme, whereas the Cu(II) geometry may more faithfully reproduce the NiR type 2 center. Mutations at the helical interface successfully produce a hydrogen bond between an interfacial Glu residue and the Culigating His residue, which allows for the tuning of the redox potential over a 100 mV range. We successfully created constructs with as much as a 120-fold improvement from the original design by modifying the steric bulk above or below the Cu binding site. These systems are now the most active water-soluble and stable artificial NiR catalysts yet produced. Several avenues for improving the catalytic efficiency of later designs are detailed within this Perspective, including adjustment of their resting oxidation state, the use of asymmetric scaffolds to allow for single amino acid mutation within the second coordination sphere, and the design of hydrogen-bonding networks to tune residue orientation and electronics. Through these studies the TRI-H system has given insight into the difficulties that arise in creating a de novo redox active enzyme. Work to improve upon this model will provide strategies by which redox-active de novo enzymes may be tuned and detail how native enzymes accomplish catalytic efficiencies through proton gated redox catalysis.

Study of the Cys-His bridge electron transfer pathway in a copper-containing nitrite reductase by site-directed mutagenesis, spectroscopic, and computational methods

The Cys-His bridge as electron transfer conduit in the enzymatic catalysis of nitrite to nitric oxide by nitrite reductase from Sinorhizobium meliloti 2011 (SmNir) was evaluated by site-directed mutagenesis, steady state kinetic studies, UV-vis and EPR spectroscopic measurements as well as computational calculations. The kinetic, structural and spectroscopic properties of the His171Asp (H171D) and Cys172Asp (C172D) SmNir variants were compared with the wild type enzyme. Molecular properties of H171D and C172D indicate that these point mutations have not visible effects on the quaternary structure of SmNir. Both variants are catalytically incompetent using the physiological electron donor pseudoazurin, though C172D presents catalytic activity with the artificial electron donor methyl viologen (k_cat=3.9(4) s^-1) lower than that of wt SmNir (k_cat=240(50) s^-1). QM/MM calculations indicate that the lack of activity of H171D may be ascribed to the N^δ1H…OC hydrogen bond that partially shortcuts the T1-T2 bridging Cys-His covalent pathway. The role of the N^δ1H…OC hydrogen bond in the pH-dependent catalytic activity of wt SmNir is also analyzed by monitoring the T1 and T2 oxidation states at the end of the catalytic reaction of wt SmNir at pH6 and 10 by UV-vis and EPR spectroscopies. These data provide insight into how changes in Cys-His bridge interrupts the electron transfer between T1 and T2 and how the pH-dependent catalytic activity of the enzyme are related to pH-dependent structural modifications of the T1-T2 bridging chemical pathway.

Recent structural insights into the function of copper nitrite reductases

Copper nitrite reductases (CuNiRs) catalyse the reduction of nitrite to nitric oxide as part of the denitrification pathway. In this review, we describe insights into CuNiR function from structural studies.

Comparative analysis of amino acid composition in the active site of nirk gene encoding copper-containing nitrite reductase (CuNiR) in bacterial spp

The nirk gene encoding the copper-containing nitrite reductase (CuNiR), a key catalytic enzyme in the environmental denitrification process that helps to produce nitric oxide from nitrite. The molecular mechanism of denitrification process is definitely complex and in this case a theoretical investigation has been conducted to know the sequence information and amino acid composition of the active site of CuNiR enzyme using various Bioinformatics tools. 10 Fasta formatted sequences were retrieved from the NCBI database and the domain and disordered regions identification and phylogenetic analyses were done on these sequences. The comparative modeling of protein was performed through Modeller 9v14 program and visualized by PyMOL tools. Validated protein models were deposited in the Protein Model Database (PMDB) (PMDB id: PM0080150 to PM0080159). Active sites of nirk encoding CuNiR enzyme were identified by Castp server. The PROCHECK showed significant scores for four protein models in the most favored regions of the Ramachandran plot. Active sites and cavities prediction exhibited that the amino acid, namely Glycine, Alanine, Histidine, Aspartic acid, Glutamic acid, Threonine, and Glutamine were common in four predicted protein models. The present in silico study anticipates that active site analyses result will pave the way for further research on the complex denitrification mechanism of the selected species in the experimental laboratory.

Nitrite Reductase Activity in Engineered Azurin Variants

Nitrite reductase (NiR) activity was examined in a series of dicopper P.a. azurin variants in which a surface binding copper site was added through site-directed mutagenesis. Four variants were synthesized with copper binding motifs inspired by the catalytic type 2 copper binding sites found in the native noncoupled dinuclear copper enzymes nitrite reductase and peptidylglycine α-hydroxylating monooxygenase. The four azurin variants, denoted Az-NiR, Az-NiR3His, Az-PHM, and Az-PHM3His, maintained the azurin electron transfer copper center, with the second designed copper site located over 13 Å away and consisting of mutations Asn10His,Gln14Asp,Asn16His-azurin, Asn10His,Gln14His,Asn16His-azurin, Gln8Met,Gln14His,Asn16His-azurin, and Gln8His,Gln14His,Asn16His-azurin, respectively. UV-visible absorption spectroscopy, EPR spectroscopy, and electrochemistry of the sites demonstrate copper binding as well as interaction with small exogenous ligands. The nitrite reduction activity of the variants was determined, including the catalytic Michaelis-Menten parameters. The variants showed activity (0.34-0.59 min(-1)) that was slower than that of native NiRs but comparable to that of other model systems. There were small variations in activity of the four variants that correlated with the number of histidines in the added copper site. Catalysis was found to be reversible, with nitrite produced from NO. Reactions starting with reduced azurin variants demonstrated that electrons from both copper centers were used to reduce nitrite, although steady-state catalysis required the T2 copper center and did not require the T1 center. Finally, experiments separating rates of enzyme reduction from rates of reoxidation by nitrite demonstrated that the reaction with nitrite was rate limiting during catalysis.

Redox-coupled structural changes in nitrite reductase revealed by serial femtosecond and microfocus crystallography

Serial femtosecond crystallography (SFX) has enabled the damage-free structural determination of metalloenzymes and filled the gaps of our knowledge between crystallographic and spectroscopic data. Crystallographers, however, scarcely know whether the rising technique provides truly new structural insights into mechanisms of metalloenzymes partly because of limited resolutions. Copper nitrite reductase (CuNiR), which converts nitrite to nitric oxide in denitrification, has been extensively studied by synchrotron radiation crystallography (SRX). Although catalytic Cu (Type 2 copper (T2Cu)) of CuNiR had been suspected to tolerate X-ray photoreduction, we here showed that T2Cu in the form free of nitrite is reduced and changes its coordination structure in SRX. Moreover, we determined the completely oxidized CuNiR structure at 1.43 Å resolution with SFX. Comparison between the high-resolution SFX and SRX data revealed the subtle structural change of a catalytic His residue by X-ray photoreduction. This finding, which SRX has failed to uncover, provides new insight into the reaction mechanism of CuNiR.

The evolution of respiratory O2/NO reductases: an out-of-the-phylogenetic-box perspective

Complex life on our planet crucially depends on strong redox disequilibria afforded by the almost ubiquitous presence of highly oxidizing molecular oxygen. However, the history of O2-levels in the atmosphere is complex and prior to the Great Oxidation Event some 2.3 billion years ago, the amount of O2 in the biosphere is considered to have been extremely low as compared with present-day values. Therefore the evolutionary histories of life and of O2-levels are likely intricately intertwined. The obvious biological proxy for inferring the impact of changing O2-levels on life is the evolutionary history of the enzyme allowing organisms to tap into the redox power of molecular oxygen, i.e. the bioenergetic O2 reductases, alias the cytochrome and quinol oxidases. Consequently, molecular phylogenies reconstructed for this enzyme superfamily have been exploited over the last two decades in attempts to elucidate the interlocking between O2 levels in the environment and the evolution of respiratory bioenergetic processes. Although based on strictly identical datasets, these phylogenetic approaches have led to diametrically opposite scenarios with respect to the history of both the enzyme superfamily and molecular oxygen on the Earth. In an effort to overcome the deadlock of molecular phylogeny, we here review presently available structural, functional, palaeogeochemical and thermodynamic information pertinent to the evolution of the superfamily (which notably also encompasses the subfamily of nitric oxide reductases). The scenario which, in our eyes, most closely fits the ensemble of these non-phylogenetic data, sees the low O2-affinity SoxM- (or A-) type enzymes as the most recent evolutionary innovation and the high-affinity O2 reductases (SoxB or B and cbb3 or C) as arising independently from NO-reducing precursor enzymes.

Enzymatic mechanism of copper-containing nitrite reductase

Copper-containing nitrite reductases (CuNiRs) catalyze the reduction of nitrite to nitric oxide, a key step in the denitrification process that maintains balance between organic and inorganic nitrogen. Despite their importance, their functioning is not well understood. In this work, we carry out first-principles calculations and show that the available structural data are consistent only with a single mechanism. For this mechanism, we determine the activation energies, transition states, and minimum energy pathways of CuNiR. The calculations lead to an updated enzymatic mechanism and resolve several controversial issues. In particular, our work identifies the origins of the two protons necessary for the enzymatic function and shows that the transformation from the initial O-coordination of substrate to the final N-coordination of product is achieved by electron transfer from T1 copper to T2 copper, rather than by the previously reported side-on coordination of a NO intermediate, which only takes place in the reduced enzyme. We also examine the role of structural change in the critical residue Asp(98), reported in one experimental study, and find that while the structural change affects the energetics of substrate attachment and product release at the T2 copper reaction center, it does not significantly affect the activation energy and reaction pathways of the nitrite reduction process.

Characterization of a novel copper-haem c dissimilatory nitrite reductase from Ralstonia pickettii

NiRs (nitrite reductases) convert nitrite into NO in the denitrification process. RpNiR (Ralstonia pickettii NiR), a new type of dissimilatory Cu-containing NiR with a C-terminal haem c domain from R. pickettii, has been cloned, overexpressed in Escherichia coli and purified to homogeneity. The enzyme has a subunit molecular mass of 50515 Da, consistent with sequence data showing homology to the well-studied two-domain Cu NiRs, but with an attached C-terminal haem c domain. Gel filtration and combined SEC (size-exclusion chromatography)-SAXS (small angle X-ray scattering) analysis shows the protein to be trimeric. The metal content of RpNiR is consistent with each monomer having a single haem c group and the two Cu sites being metallated by Cu2+ ions. The absorption spectrum of the oxidized as-isolated recombinant enzyme is dominated by the haem c. X-band EPR spectra have clear features arising from both type 1 Cu and type 2 Cu centres in addition to those of low-spin ferric haem. The requirements for activity and low apparent Km for nitrite are similar to other CuNiRs (Cu-centre NiRs). However, EPR and direct binding measurements of nitrite show that oxidized RpNiR binds nitrite very weakly, suggesting that substrate binds to the reduced type 2 Cu site during turnover. Analysis of SEC-SAXS data suggests that the haem c domains in RpNiR form extensions into the solvent, conferring a high degree of conformational flexibility in solution. SAXS data yield Rg (gyration radius) and Dmax (maximum particle diameter) values of 43.4 Å (1 Å=0.1 nm) and 154 Å compared with 28 Å and 80 Å found for the two-domain CuNiR of Alcaligenes xylosoxidans.

Nitrite biosensing via selective enzymes--a long but promising route

The last decades have witnessed a steady increase of the social and political awareness for the need of monitoring and controlling environmental and industrial processes. In the case of nitrite ion, due to its potential toxicity for human health, the European Union has recently implemented a number of rules to restrict its level in drinking waters and food products. Although several analytical protocols have been proposed for nitrite quantification, none of them enable a reliable and quick analysis of complex samples. An alternative approach relies on the construction of biosensing devices using stable enzymes, with both high activity and specificity for nitrite. In this paper we review the current state-of-the-art in the field of electrochemical and optical biosensors using nitrite reducing enzymes as biorecognition elements and discuss the opportunities and challenges in this emerging market.

A nitrite biosensor based on co-immobilization of nitrite reductase and viologen-modified chitosan on a glassy carbon electrode

An electrochemical nitrite biosensor based on co-immobilization of copper-containing nitrite reductase (Cu-NiR, from Rhodopseudomonas sphaeroides forma sp. denitrificans) and viologen-modified chitosan (CHIT-V) on a glassy carbon electrode (GCE) is presented. Electron transfer (ET) between a conventional GCE and immobilized Cu-NiR was mediated by the co-immobilized CHIT-V. Redox-active viologen was covalently linked to a chitosan backbone, and the thus produced CHIT-V was co-immobilized with Cu-NiR on the GCE surface by drop-coating of hydrophilic polyurethane (HPU). The electrode responded to nitrite with a limit of detection (LOD) of 40 nM (S/N = 3). The sensitivity, linear response range, and response time (t(90%)) were 14.9 nA/μM, 0.04-11 μM (r(2) = 0.999) and 15 s, respectively. The corresponding Lineweaver-Burk plot showed that the apparent Michaelis-Menten constant (K(M) (app)) was 65 μM. Storage stability of the biosensor (retaining 80% of initial activity) was 65 days under ambient air and room temperature storage conditions. Reproducibility of the sensor showed a relative standard deviation (RSD) of 2.8% (n = 5) for detection of 1 μM of nitrite. An interference study showed that anions commonly found in water samples such as chlorate, chloride, sulfate and sulfite did not interfere with the nitrite detection. However, nitrate interfered with a relative sensitivity of 64% and this interference effect was due to the intrinsic character of the NiR employed in this study.

Directed evolution of copper nitrite reductase to a chromogenic reductant

Directed evolution methods were developed for Cu-containing nitrite reductase (NiR) from Alcaligenes faecalis S-6. The PCR cloning strategy allows for the efficient production of libraries of 100 000 clones by a modification of a megaprimer-based whole-plasmid synthesis reaction. The high-throughput screen includes colony lift onto a nylon membrane and subsequent lysis of NiR-expressing colonies in the presence of Cu(2+) ions for copper incorporation into intracellularly expressed NiR. Addition of a chromogenic substrate, 3, 3'-diaminobenzidine (DAB), results in deposition of red, insoluble color at the site of oxidation by functional NiR. Twenty-thousand random variants of NiR were screened for improved function with DAB as a reductant, and five variants were identified. These variants were shuffled and screened, yielding two double variants. An analog of the DAB substrate, o-dianisidine, which is oxidized to a water-soluble product was used for functional characterization. The double variant M150L/F312C was most proficient at o-dianisidine oxidation with dioxygen as the electron acceptor (5.5X wt), and the M150L single variant was most proficient at o-dianisidine oxidation with nitrite as the electron acceptor (8.5X wt). The library generation and screening method can be employed for evolving new reductase functions in NiR and for screening of efficient folding of engineered NiRs.

Homologues of nitrite reductases in ammonia-oxidizing archaea: diversity and genomic context

Ammonia-oxidizing archaea are frequent and ubiquitous inhabitants of terrestrial and marine environments. As they have only recently been detected, most aspects of their metabolism are yet unknown. Here we report on the occurrence of genes encoding potential homologues of copper-dependent nitrite reductases (NirK) in ammonia-oxidizing archaea of soils and other environments using metagenomic approaches and PCR amplification. Two pairs of highly overlapping 40 kb genome fragments, each containing nirK genes of archaea, were isolated from a metagenomic soil library. Between 68% and 85% of the open reading frames on these genome fragments had homologues in the genomes of the marine archaeal ammonia oxidizers Nitrosopumilus maritimus and Cenarchaeum symbiosum. Extensions of NirK homologues with C-terminal fused amicyanin domains were deduced from two of the four fosmids indicating structural variation of these multicopper proteins in archaea. Phylogenetic analyses including all major groups of currently known NirK homologues revealed that the deduced protein sequences of marine and soil archaea were separated into two highly divergent lineages that did not contain bacterial homologues. In contrast, another separated lineage contained potential multicopper oxidases of both domains, archaea and bacteria. More nirK gene variants directly amplified by PCR from several environments indicated further diversity of the gene and a widespread occurrence in archaea. Transcription of the potential archaeal nirK in soil was demonstrated at different water contents, but no significant increase in transcript copy number was observed with increased denitrifying activity.

The periplasmic nitrate reductase in Shewanella: the resolution, distribution and functional implications of two NAP isoforms, NapEDABC and NapDAGHB

In the bacterial periplasm, the reduction of nitrate to nitrite is catalysed by a periplasmic nitrate reductase (NAP) system, which is a species-dependent assembly of protein subunits encoded by the nap operon. The reduction of nitrate catalysed by NAP takes place in the 90 kDa NapA subunit, which contains a Mo-bis-molybdopterin guanine dinucleotide cofactor and one [4Fe-4S] iron-sulfur cluster. A review of the nap operons in the genomes of 19 strains of Shewanella shows that most genomes contain two nap operons. This is an unusual feature of this genus. The two NAP isoforms each comprise three isoform-specific subunits - NapA, a di-haem cytochrome NapB, and a maturation chaperone NapD - but have different membrane-intrinsic subunits, and have been named NAP-alpha (NapEDABC) and NAP-beta (NapDAGHB). Sixteen Shewanella genomes encode both NAP-alpha and NAP-beta. The genome of the vigorous denitrifier Shewanella denitrificans OS217 encodes only NAP-alpha and the genome of the respiratory nitrate ammonifier Shewanella oneidensis MR-1 encodes only NAP-beta. This raises the possibility that NAP-alpha and NAP-beta are associated with physiologically distinct processes in the environmentally adaptable genus Shewanella.

Crystal structure of a two-domain multicopper oxidase: implications for the evolution of multicopper blue proteins

The two-domain multicopper oxidases are proposed to be key intermediates in the evolution of three-domain multicopper oxidases. A number of two-domain multicopper oxidases have been identified from genome sequences and are classified as type A, type B, or type C on the basis of the predicted location of the type 1 copper center. The crystal structure of blue copper oxidase, a type C two-domain multicopper oxidase from Nitrosomonas europaea, has been determined to 1.9 A resolution. Blue copper oxidase is a trimer, of which each subunit comprises two cupredoxin domains. Each subunit houses a type 1 copper site in domain 1 and a type 2/type 3 trinuclear copper cluster at the subunit-subunit interface. The coordination geometry at the trinuclear copper site is consistent with reduction of the copper ions. Although the overall architecture of blue copper oxidase is similar to nitrite reductases, detailed structural alignments show that the fold and domain orientation more closely resemble the three-domain multicopper oxidases. These observations have important implications for the evolution of nitrite reductases and multicopper oxidases.

Spectroscopic and computational studies of nitrite reductase: proton induced electron transfer and backbonding contributions to reactivity

A combination of spectroscopy and DFT calculations has been used to define the geometric and electronic structure of the nitrite bound type 2 (T2) copper site at high and low pH in nitrite reductase from Rhodobacter sphaeroides. At high pH there is no electron transfer from reduced type 1 (T1) to the nitrite bound T2 copper, while protonation triggers T1 --> T2 electron transfer and generation of NO. The DFT calculated reaction coordinate for the N-O bond cleavage in nitrite reduction by the reduced T2 copper suggests that the process is best described as proton transfer triggering electron transfer. Bidentate nitrite binding to copper is calculated to play a major role in activating the reductive cleavage of the nitrite bond through backbonding combined with stabilization of the (-)OH product by coordination to the Cu(2+).