Metal ion dependence of phosphorothioate ATP analogues in the Bacillus stearothermophilus tyrosyl-tRNA synthetase reaction

Mechanism of Sulfate Activation Catalyzed by ATP Sulfurylase - Magnesium Inhibits the Activity

ATPS Sulfurylase (ATPS) is the first of three enzymes in the sulfate reduction pathway - one of the oldest metabolic pathways on Earth, utilized by Sulfate Reducing Bacteria (SRB). Due to the low redox potential of the sulfate ion, its reduction requires activation via formation of adenosine 5'-phosphosulfate (APS), which is catalyzed by ATPS. Dispersion-corrected hybrid density functional theory (DFT/B3LYP-D3) was used to test three reaction mechanisms proposed for conversion of ATP to APS: two-step SN-1 reaction running through AMP anhydride intermediate, two-step reaction involving cyclic AMP intermediate and direct SN-2 conversion of ATP to APS molecule. The study employed five different cluster models of the ATPS active site: one containing magnesium cation and four without it, constructed based on the crystal structure (PDB code: 1G8H) solved for ATPS from Saccharomyces cerevisiae in complex with APS and pyrophosphate (PPi), where Mg2+ was not detected. The model with magnesium ion was constructed based on the representative structure obtained from trajectory analysis of the molecular dynamics simulations (MD) performed for the hexameric ATPS-APS-Mg2+-PPi complex. The results obtained for all considered models suggest that ATPS-AMP anhydride intermediate is a highly energetic and unstable complex, while formation of cyclic AMP molecule requires formation of unfavorable hypervalent geometry at the transition state. Among all tested mechanism, the energetically most feasible mechanism of the ATPS reaction is SN-2 one-step conversion of ATP to APS occurring via a pentavalent transition state. Interestingly, such a reaction is inhibited by the presence of Mg2+ in the ATPS active site. Magnesium cation forces unfavorable geometry of reactants for SN-2 mechanism and formation of pentavalent transition state. Such a reaction requires rearrangement of Mg2+ ligands, which raises the barrier from 11-14 kcal/mol for the models without Mg2+ to 48 kcal/mol for model with magnesium ion included.

Thioaptamer interactions with prion proteins: sequence-specific and non-specific binding sites

Binding of nucleic acids to the prion protein (PrP) created a conundrum that required distinguishing between non-specific interactions and biologically important polynucleotides. In the process of developing selective ligands for PrP, we found using a single-stranded DNA thioaptamer library that the binding of thioaptamers to PrP occurs on at least two different sites on the protein. Selection against recombinant (rec) PrP of Syrian hamster (SHa) sequence 90-231 folded into an alpha-helical-rich conformation identified a 12-base consensus sequence within a series of 20 thioaptamers, all of which consist of 40 bases. Each thioaptamer was comprised of both normal and thio-dA modified bases. One thioaptamer designated 97 bound to recSHaPrP with affinity of 0.58(+/-0.1) nM; lower affinities for bovine (Bo), and human (Hu) were found, establishing that binding is dependent on the primary structure of PrP. High affinity binding of thioaptamer 97 to PrP was found to be mediated through the dodecyl sequence GACACAAGCCGA within the consensus region with five critical backbone modifications 5' to each dA residue. A control oligonucleotide with an equivalent number of phosphorothioates to thioaptamer 97 and a scrambled consensus sequence could not distinguish among the three PrP sequences. Control oligonucleotides bearing non-selected sequences bound to PrP at a sequence-independent DNA-binding site. In contrast, the high-affinity binding of thioaptamer 97 to PrP depends on (1) backbone modifications, (2) oligonucleotide sequence, and (3) PrP sequence.

Molecular recognition in purinergic receptors. 2. Diastereoselectivity of the h-P2Y1-receptor

In the companion paper, part 1, we described the construction of an improved molecular model for the h-P2Y1 receptor (h-P2Y1-R) and proposed a rational for the stereoelectronic selectivity of the receptor. Here, we extend our studies on the molecular recognition of the h-P2Y1-R to the exploration of the diastereoselectivity of this receptor. For this purpose, we implemented an integrative approach combining synthesis, spectral analysis, biochemical assays, and computational analysis. Specifically, we selected and synthesized novel ATP analogues bearing a chiral center on the phosphate chain. We analyzed the conformation of the chiral ATP analogues in solution by 1H/13C NMR and assigned the absolute configuration of the diastereoisomers. The coordination mode of these analogues with a Mg2+ ion was evaluated by 31P NMR. These chiral analogues were biochemically evaluated and found to be potent h-P2Y1-R ligands. An EC50 difference of ca. 20-fold was observed between the diastereoisomers. Their spectral absolute configuration assignment was confirmed by comparison of the biochemical results to those of ATP-alpha-S diastereoisomers whose chirality is known. Finally, a computational analysis was performed for the elucidation of molecular recognition employing molecular mechanics (docking) studies on the receptor:ligands complexes. On the basis of the current results, we hypothesize that h-P2Y1-R's chiral discrimination originates from the requirement that the nucleotide analogue interacts with a Mg2+ ion within the receptor binding site. This Mg2+ ion is possibly coordinated with both Asp204 and the ATP's alpha, beta, gamma-phosphates in a Lambda configuration.

Crystal structure of ATP sulfurylase from Saccharomyces cerevisiae, a key enzyme in sulfate activation

ATP sulfurylases (ATPSs) are ubiquitous enzymes that catalyse the primary step of intracellular sulfate activation: the reaction of inorganic sulfate with ATP to form adenosine-5'-phosphosulfate (APS) and pyrophosphate (PPi). With the crystal structure of ATPS from the yeast Saccharomyces cerevisiae, we have solved the first structure of a member of the ATP sulfurylase family. We have analysed the crystal structure of the native enzyme at 1.95 Angstroms resolution using multiple isomorphous replacement (MIR) and, subsequently, the ternary enzyme product complex with APS and PPi bound to the active site. The enzyme consists of six identical subunits arranged in two stacked rings in a D:3 symmetric assembly. Nucleotide binding causes significant conformational changes, which lead to a rigid body structural displacement of domains III and IV of the ATPS monomer. Despite having similar folds and active site design, examination of the active site of ATPS and comparison with known structures of related nucleotidylyl transferases reveal a novel ATP binding mode that is peculiar to ATP sulfurylases.

Structural principles for the inhibition of the 3'-5' exonuclease activity of Escherichia coli DNA polymerase I by phosphorothioates

A two-metal-ion catalytic mechanism has previously been proposed for several phosphoryl-transfer enzymes. In order to extend the structural basis of this mechanism, crystal structures of three single-stranded DNA substrates bound to the 3'-5' exonucleolytic active site of the large fragment of DNA polymerase I from Escherichia coli have been elucidated. The first is a 2.1 A resolution structure of a Michaelis complex between the large fragment (or Klenow fragment, KF) and a single-stranded DNA substrate, stabilized by low pH and flash-freezing. The positions and identities of the catalytic metal ions, a Zn2+ at site A and a Mg2+ at site B, have been clearly established. The structural and kinetic consequences of sulfur substitutions in the scissile phosphate have been explored. A complex with the Rp isomer of phosphorothioate DNA, refined at 2.2 A resolution, shows Zn2+ bound to both metal sites and a mispositioning of the substrate and attacking nucleophile. The complex with the Sp phosphorothioate at 2. 3 A resolution reveals that metal ions do not bind in the active site, having been displaced by a bulky sulfur atom. Steady-state kinetic experiments show that catalyzed hydrolysis of the Rp isomer was reduced only about 15-fold, while no enzyme activity could be detected with the Sp phosphorothioate, consistent with the structural observations. Furthermore, Mn2+ could not rescue the activity of the exonuclease on the Sp phosphorothioate. Taken together, these studies confirm and extend the proposed two-metal-ion exonuclease mechanism and provide a structural context to explain the effects of sulfur substitutions on this and other phosphoryl-transfer enzymes. These experiments also suggest that the possibility of metal-ion exclusion be taken into account when interpreting the results of Mn2+ rescue experiments.

Involvement of threonine 234 in catalysis of tyrosyl adenylate formation by tyrosyl-tRNA synthetase

There is a mobile loop in the tyrosyl-tRNA synthetase that contains the KMSKS signature sequence of class I aminoacyl-tRNA synthetases. As it has not been possible to determine the role of the mobile loop in catalysis from X-ray crystallographic studies, we are investigating its importance by a series of site-directed mutagenic and kinetic studies. Here we examine the role of threonine 234 (T234) in the catalysis of tyrosyl adenylate formation by tyrosyl-tRNA synthetase from Bacillus stearothermophilus. This residue is the carboxy-terminal residue in the signature sequence and is either a serine or threonine in eight of the ten class I aminoacyl-tRNA synthetases isolated from Escherichia coli. Kinetic analyses of tyrosyl adenylate formation in the mutant enzymes indicate that k3, the forward rate constant for the formation of tyrosyl adenylate, is reduced 500-fold on mutation of T234 to alanine. In contrast, mutation of T234 to serine results in only a 4-fold decrease in k3, suggesting that the loss of the hydroxyl group in the T234A mutant is responsible for its decreased reaction rate. Deletion of the hydroxyl group destabilizes the transition state for the formation of tyrosyl adenylate by 2.7 kcal/mol. The transition state is also destabilized by 1.4 kcal/mol on the mutation of K230 to alanine. The effects of mutation of both T234 and K230 to alanine are less than additive; there is a coupling energy of -1.3 kcal/mol in the transition state. The effects of mutating K230 and T234 to alanine are also nonadditive in the E.Tyr-AMP complex (coupling energy = -1.9 kcal/mol).(ABSTRACT TRUNCATED AT 250 WORDS)

Structural basis for transfer RNA aminoacylation by Escherichia coli glutaminyl-tRNA synthetase

The structure of Escherichia coli glutaminyl-tRNA synthetase complexed with tRNA2Gln and ATP refined at 2.5-A resolution reveals structural details of the catalytic center and allows description of the specific roles of individual amino acid residues in substrate binding and catalysis. The reactive moieties of the ATP and tRNA substrates are positioned within hydrogen-bonding distance of each other. Model-building has been used to position the glutamine substrate in an adjacent cavity with its reactive carboxylate adjacent to the alpha-phosphate of ATP; the interactions of the carboxyamide side chain suggest a structural rationale for the way in which the enzyme discriminates against glutamate. The binding site for a manganese ion has also been identified bridging the beta- and gamma-phosphates of the ATP. The well-known HIGH and KMSKS sequence motifs interact directly with each other as well as with the ATP, providing a structural rationale for their simultaneous conservation in all class I synthetases. The KMSKS loop adopts a well-ordered and catalytically productive conformation as a consequence of interactions made with the proximal beta-barrel domain. While there are no protein side chains near the reaction site that might function in acid-base catalysis, the side chains of two residues, His43 and Lys270, are positioned to assist in stabilizing the expected pentacovalent intermediate at the alpha-phosphate. Transfer of glutamine to the 3'-terminal tRNA ribose may well proceed by intramolecular catalysis involving proton abstraction by a phosphate oxygen atom of glutaminyl adenylate. Catalytic competence of the crystalline enzyme is directly shown by its ability to hydrolyze ATP and release pyrophosphate when crystals of the ternary complex are soaked in mother liquor containing glutamine.

Catalytic activity of aminoacyl tRNA synthetases and its implications for the origin of life. I. Aminoacyl adenylate formation in tyrosyl tRNA synthetase

The changes in the catalytic activity resulting from amino acid substitutions in the active site region have been theoretically modeled for tyrosyl tRNA synthetase (Tyr-RS). The catalytic activity was calculated as the differential stabilization of the transition state using electrostatic approximation. The results indicate that charged residues His45, His48, Asp78, Asp176, Asp194, Lys225, Lys230, Lys233, Arg265, and Lys268 play essential roles in catalysis of aminoacyl adenylate formation in Tyr-RS, which is in general agreement with previously known experimental data for residues 45, 48, 194, 230, and 233. These catalytic residues have also been used to search for sequence homology patterns among class I aminoacyl RSs of which HIGH and KMSKS conserved sequence motifs are well known. His45 and His48 belong to the HIGH signature sequence of class I aminoacyl tRNA synthetases (aRSs), whereas Arg265 and Lys268 can constitute a part of the KMSKS charge pattern. Lys225, Lys230, and Lys233 may be part of the conservative substitution pattern [HKR]-X(4)-[HKR]-X(2)-[HKR], and Asp194 is part of the new GSDQ motif. This demonstrates that the three dimensional charge distribution near the active site is an essential feature of the catalytic activity of aRS and that the theoretical technique used in this work can be utilized in searches for the catalytically important residues that may provide a clue for a charge residue pattern conserved in evolution. The appearance of patterns I-IV in Arg-, Gln-, Met-, Ile-, Leu-, Trp-, Val-, Glu-, Cys-, and Tyr-RS indicates that all these enzymes could have the same ancestor.