Pulsed-alkylation mass spectrometry for the study of protein folding and dynamics: development and application to the study of a folding/unfolding intermediate of bacterial luciferase

Evaluating Chemical Footprinting-Induced Perturbation of Protein Higher Order Structure

Specific amino acid footprinting mass spectrometry (MS) is an increasingly utilized method for elucidating protein higher order structure (HOS). It does this by adding to certain amino acid residues a mass tag, whose reaction extent depends on solvent accessibility and microenvironment of the protein. Unlike reactive free radicals and carbenes, these specific footprinters react slower than protein unfolding. Thus, their footprinting, under certain conditions, provokes structural changes to the protein, leading to labeling on non-native structures. It is critical to establish conditions (i.e., reagent concentrations, time of reaction) to ensure that the structure of the protein following footprinting remains native. Here, we compare the efficacy of five methods in assessing protein HOS following footprinting at the intact protein level and then further localize the perturbation at the peptide level. Three are MS-based methods that provide dose-response plot analysis, evaluation of Poisson distributions of precursor and products, and determination of the average number of modifications. These MS-based methods reliably and effectively indicate HOS perturbation at the intact protein level, whereas spectroscopic methods (circular dichroism (CD) and dynamic light scattering (DLS)) are less sensitive in monitoring subtle HOS perturbation caused by footprinting. Evaluation of HOS at the peptide level indicates regions that are sensitive to localized perturbations. Peptide-level analysis also provides higher resolution of the HOS perturbation, and we recommend using it for future footprinting studies. Overall, this work shows conclusive evidence for HOS perturbation caused by footprinting. Implementation of quality control workflows can identify conditions to avoid the perturbation, for footprinting, allowing accurate and reliable identification of protein structural changes that accompany, for example, ligand interactions, mutations, and changes in solution environment.

Workflow for Validating Specific Amino Acid Footprinting Reagents for Protein Higher Order Structure Elucidation

Protein footprinting mass spectrometry probes protein higher order structure and dynamics by labeling amino acid side-chains or backbone amides as a function of solvent accessibility. One category of footprinting uses residue-specific, irreversible covalent modifications, affording flexibility of sample processing for bottom-up analysis. Although several specific amino acid footprinting technologies are becoming established in structural proteomics, there remains a need to assess fundamental properties of new reagents before their application. Often, footprinting reagents are applied to complex or novel protein systems soon after their discovery and sometimes without a thorough investigation of potential downsides of the reagent. In this work, we assemble and test a validation workflow that utilizes cyclic peptides and a model protein to characterize benzoyl fluoride, a recently published, next-generation nucleophile footprinter. The workflow includes the characterization of potential side-chain reactive groups, reaction "quench" efficacies, reagent considerations and caveats (e.g., buffer pH), residue-specific kinetics compared to those of established reagents, and protein-wide characterization of modification sites with considerations for proteolysis. The proposed workflow serves as a starting point for improved footprinting reagent discovery, validation, and introduction, the aspects of which we recommend before applying to unknown protein systems.

Benzoyl Transfer for Footprinting Alcohol-Containing Residues in Higher Order Structural Applications of Mass-Spectrometry-Based Proteomics

Protein footprinting mass spectrometry (MS), an emerging approach to elucidate higher-order structure (HOS) and binding, benefits from the iterative development of reaction strategies to expand the covalent labeling toolbox. Herein, we introduce a footprinting reagent for nucleophiles and demonstrate its efficacy for differential covalent labeling MS analysis. Benzoyl fluoride (BF), although reactive with water, is more practical for modifying nucleophilic functional groups than other acid halides and serves as an acyl-transfer reagent for proteins. BF is 10 times more reactive with phenolic Tyr than the current generation nucleophile footprinter. BF modifies, in addition to Tyr, Lys, His, and the N-terminus, weak nucleophiles Ser and Thr, for which few footprinters exist, imparting broad applicability with a range of nucleophiles. We applied benzoylation to a model Ser- and Thr-rich protein-ligand binding system without perturbing the protein HOS. This efficacious footprinting method expands the toolbox of reagents and provides promise for future reaction strategies including possibly membrane proteins.

Bacterial Luciferases from Vibrio harveyi and Photobacterium leiognathi Demonstrate Different Conformational Stability as Detected by Time-Resolved Fluorescence Spectroscopy

Detecting the folding/unfolding pathways of biological macromolecules is one of the urgent problems of molecular biophysics. The unfolding of bacterial luciferase from Vibrio harveyi is well-studied, unlike that of Photobacterium leiognathi, despite the fact that both of them are actively used as a reporter system. The aim of this study was to compare the conformational transitions of these luciferases from two different protein subfamilies during equilibrium unfolding with urea. Intrinsic steady-state and time-resolved fluorescence spectra and circular dichroism spectra were used to determine the stages of the protein unfolding. Molecular dynamics methods were applied to find the differences in the surroundings of tryptophans in both luciferases. We found that the unfolding pathway is the same for the studied luciferases. However, the results obtained indicate more stable tertiary and secondary structures of P. leiognathi luciferase as compared to enzyme from V. harveyi during the last stage of denaturation, including the unfolding of individual subunits. The distinctions in fluorescence of the two proteins are associated with differences in the structure of the C-terminal domain of α-subunits, which causes different quenching of tryptophan emissions. The time-resolved fluorescence technique proved to be a more effective method for studying protein unfolding than steady-state methods.

Protein Footprinting via Covalent Protein Painting Reveals Structural Changes of the Proteome in Alzheimer's Disease

Misfolding and aggregation of amyloid-β peptide and hyperphosphorylated tau are molecular markers of Alzheimer's disease (AD), and although the 3D structures of these aberrantly folded proteins have been visualized in exquisite detail, no method has been able to survey protein folding across the proteome in AD. Here, we present covalent protein painting (CPP), a mass spectrometry-based protein footprinting approach to quantify the accessibility of lysine ε-amines for covalent modification at the surface of natively folded proteins. We used CPP to survey the reactivity of 2645 lysine residues and therewith the structural proteome of HEK293T cells and found that reactivity increased upon mild heat shock. CPP revealed that the accessibility of lysine residues for covalent modification in tubulin-β (TUBB), in succinate dehydrogenase (SHDB), and in amyloid-β peptide (Aβ) is altered in human postmortem brain samples of patients with neurodegenerative diseases. The structural alterations of TUBB and SHDB in patients with AD, dementia with Lewy bodies (DLB), or both point to broader perturbations of the 3D proteome beyond Aβ and hyperphosphorylated tau.

Mass Spectrometry-Based Protein Footprinting for Higher-Order Structure Analysis: Fundamentals and Applications

Proteins adopt different higher-order structures (HOS) to enable their unique biological functions. Understanding the complexities of protein higher-order structures and dynamics requires integrated approaches, where mass spectrometry (MS) is now positioned to play a key role. One of those approaches is protein footprinting. Although the initial demonstration of footprinting was for the HOS determination of protein/nucleic acid binding, the concept was later adapted to MS-based protein HOS analysis, through which different covalent labeling approaches "mark" the solvent accessible surface area (SASA) of proteins to reflect protein HOS. Hydrogen-deuterium exchange (HDX), where deuterium in D2O replaces hydrogen of the backbone amides, is the most common example of footprinting. Its advantage is that the footprint reflects SASA and hydrogen bonding, whereas one drawback is the labeling is reversible. Another example of footprinting is slow irreversible labeling of functional groups on amino acid side chains by targeted reagents with high specificity, probing structural changes at selected sites. A third footprinting approach is by reactions with fast, irreversible labeling species that are highly reactive and footprint broadly several amino acid residue side chains on the time scale of submilliseconds. All of these covalent labeling approaches combine to constitute a problem-solving toolbox that enables mass spectrometry as a valuable tool for HOS elucidation. As there has been a growing need for MS-based protein footprinting in both academia and industry owing to its high throughput capability, prompt availability, and high spatial resolution, we present a summary of the history, descriptions, principles, mechanisms, and applications of these covalent labeling approaches. Moreover, their applications are highlighted according to the biological questions they can answer. This review is intended as a tutorial for MS-based protein HOS elucidation and as a reference for investigators seeking a MS-based tool to address structural questions in protein science.

Identifying Zn-bound histidine residues in metalloproteins using hydrogen-deuterium exchange mass spectrometry

In this work, we have developed a method that uses hydrogen-deuterium exchange (HDX) of C2-hydrogens of histidines coupled with mass spectrometry (MS) to identify Zn-bound histidines in metalloproteins. This method relies on differences in HDX reaction rates of Zn-bound and Zn-free His residues. Using several model peptides and proteins, we find that all Zn-bound His residues have substantially lower HDX reaction rates in the presence of the metal. The vast majority of non-Zn-binding His residues undergo no significant changes in HDX reaction rates when their reactivity is compared in the presence and absence of Zn. Using this new approach, we then determined the Zn binding site of β-2-microglobulin, a protein associated with metal-induced amyloidosis. Together, these results suggest that HDX-MS of His C2-hydrogens is a promising new method for identifying Zn-bound histidines in metalloproteins.

Probing conformational changes in human DNA topoisomerase IIα by pulsed alkylation mass spectrometry

Type II topoisomerases are essential enzymes for solving DNA topological problems by passing one segment of DNA duplex through a transient double-strand break in a second segment. The reaction requires the enzyme to precisely control DNA cleavage and gate opening coupled with ATP hydrolysis. Using pulsed alkylation mass spectrometry, we were able to monitor the solvent accessibilities around 13 cysteines distributed throughout human topoisomerase IIα by measuring the thiol reactivities with monobromobimane. Most of the measured reactivities are in accordance with the predicted ones based on a homology structural model generated from available crystal structures. However, these results reveal new information for both the residues not covered in the structural model and potential differences between the modeled and solution holoenzyme structures. Furthermore, on the basis of the reactivity changes of several cysteines located at the N-gate and DNA gate, we could monitor the movement of topoisomerase II in the presence of cofactors and detect differences in the DNA gate between two closed clamp enzyme conformations locked by either 5'-adenylyl β,γ-imidodiphosphate or the anticancer drug ICRF-193.

Ion mobility-mass spectrometry (IM-MS) for top-down proteomics: increased dynamic range affords increased sequence coverage

A general approach that combines mass spectrometry (MS), collision-induced dissociation (CID), ion mobility (IM), and MS for top-down proteomics is described, denoted as MS-CID-IM-MS. Using this approach, CID product ions are dispersed in two dimensions, specifically size-to-charge (IM) and mass-to-charge (MS), and the resulting 2D data display greatly facilitates peptide/protein mass mapping, amino acid sequence analysis, and determination of site-specific protein modifications. Also, this approach alleviates some of the inherent limitations of top-down proteomics, viz. the limitations in dynamic range for fragment ion abundances owing to the number of fragmentation channels available to large ionic systems as well as the resulting spectral congestion. For large peptides such as melittin (2845 Da), CID of the [M + 3H](3+), [M + 4H](4+), and [M + 5H](5+) ions yields amino acid sequence coverage of 42.3%, 38.5%, and 7.7%, respectively, whereas the hybrid MS-CID-IM-MS approach yields amino acid sequence coverages of 84.6%, 65.4%, and 69.2%, respectively. For large biomolecules such as ubiquitin (8565 Da), the amino acid sequence coverage increases from 39% to 76%. The MS-CID-IM-MS top-down approach allows for greater depth of information by allowing the assignment and study of internal fragment ions. Lastly, analysis of the methyl esterification of ubiquitin and single point mutation of human iron sulfur cluster U (HISCU, 14.3 kDa) demonstrates the ability of MS-CID-IM-MS to rapidly identify the presence and sites of modifications.

Identifying disordered regions in proteins by limited proteolysis

Limited proteolysis experiments can be successfully used to detect sites of disorder in otherwise folded globular proteins. The approach relies on the fact that the proteolysis of a polypeptide substrate requires its binding in an extended conformation at the protease's active site and thus an enhanced backbone flexibility or local unfolding of the site of proteolytic attack. A striking correlation was found between sites of limited proteolysis and sites of enhanced chain flexibility of the polypeptide chain, this last evaluated by the crystallographically determined B-factor. In numerous cases, it has been shown that limited proteolysis occurs at chain regions characterized by missing electron density and thus being disordered. Therefore, limited proteolysis is a simple and reliable experimental technique that can detect sites of disorder in proteins, thus complementing the results that can be obtained by the use of other physicochemical and computational approaches.

Cysteine tagging for MS-based proteomics

Amino acid-tagging strategies are widespread in proteomics. Because of the central role of mass spectrometry (MS) as a detection technique in protein sciences, the term "mass tagging" was coined to describe the attachment of a label, which serves MS analysis and/or adds analytical value to the measurements. These so-called mass tags can be used for separation, enrichment, detection, and quantitation of peptides and proteins. In this context, cysteine is a frequent target for modifications because the thiol function can react specifically by nucleophilic substitution or addition. Furthermore, cysteines present natural modifications of biological importance and a low occurrence in the proteome that justify the development of strategies to specifically target them in peptides or proteins. In the present review, the mass-tagging methods directed to cysteine residues are comprehensively discussed, and the advantages and drawbacks of these strategies are addressed. Some concrete applications are given to underline the relevance of cysteine-tagging techniques for MS-based proteomics.

Domain-level stability of an antibody monitored by reduction, differential alkylation, and mass spectrometry analysis

Human immunoglobulin G1 (IgG1) contains 12 domains, and each has an intrachain disulfide bond that connects the two layers of antiparallel beta-sheets. These intrachain disulfide bonds are shielded from solvents under native conditions. Therefore, accessibility of the disulfide bonds to reduction under conditions that unfold antibody has the potential to be a good indicator of the thermodynamic stability of each domain. The stability of a recombinant monoclonal antibody at the domain level was investigated using a novel method involving reduction of the disulfide bonds in the presence of increasing amounts of guanidine hydrochloride and alkylation with [(12)C]iodoacetic acid, which was followed by reduction of the remaining disulfide bonds and alkylation with [(13)C]iodoacetic acid. The percentage of modification by [(12)C]iodoacetic acid of each cysteine residue was calculated using mass spectra of the cysteine-containing tryptic peptides and used to follow the unfolding of each domain. It demonstrated that the CH2 domain was the least stable domain of the antibody, whereas the CH3 domain was the most stable domain of the antibody. Other domains showed intermediate resistance to the denaturant concentration, similar to the overall unfolding transition monitored by the intrinsic tryptophan fluorescence wavelength shift.

High-throughput method for on-target performic acid oxidation of MALDI-deposited samples

An information-rich on-target performic acid oxidation method, which is compatible with alkylation for differentiation of free cysteine versus disulfide-containing peptides, is described. On-target oxidation is achieved using performic acid vapor to oxidize disulfide-containing peptides and/or small proteins on the matrix-assisted laser desorption/ionization (MALDI) sample deposits. The on-target oxidation method is preferred over solution-phase oxidation methods because (1) less sample handling is required, (2) oxidation throughput is drastically increased and (3) ion suppression effects are reduced because performic acid is not added directly to the MALDI spot. The utility of this method is demonstrated by simultaneous oxidation of multiple MALDI sample deposits containing model disulfide-linked peptides, intact bovine insulin and a bovine ribonuclease A proteolytic digest.

Probing protein structure by amino acid-specific covalent labeling and mass spectrometry

For many years, amino acid-specific covalent labeling has been a valuable tool to study protein structure and protein interactions, especially for systems that are difficult to study by other means. These covalent labeling methods typically map protein structure and interactions by measuring the differential reactivity of amino acid side chains. The reactivity of amino acids in proteins generally depends on the accessibility of the side chain to the reagent, the inherent reactivity of the label and the reactivity of the amino acid side chain. Peptide mass mapping with ESI- or MALDI-MS and peptide sequencing with tandem MS are typically employed to identify modification sites to provide site-specific structural information. In this review, we describe the reagents that are most commonly used in these residue-specific modification reactions, details about the proper use of these covalent labeling reagents, and information about the specific biochemical problems that have been addressed with covalent labeling strategies.

Mutational analysis of the stability of the H2A and H2B histone monomers

The eukaryotic histone heterodimer H2A-H2B folds through an obligatory dimeric intermediate that forms in a nearly diffusion-limited association reaction in the stopped-flow dead time. It is unclear whether there is partial folding of the isolated monomers before association. To address the possible contributions of structure in the monomers to the rapid association, we characterized H2A and H2B monomers in the absence of their heterodimeric partner. By far-UV circular dichroism, the H2A and H2B monomers are 15% and 31% helical, respectively--significantly less than observed in X-ray crystal structures. Acrylamide quenching of the intrinsic Tyr fluorescence was indicative of tertiary structure. The H2A and H2B monomers exhibit free energies of unfolding of 2.5 and 2.9 kcal mol(-1), respectively; at 10 microM, the sum of the stability of the monomers is approximately 60% of the stability of the native dimer. The helical content, stability, and m values indicate that H2B has a more stable, compact structure than H2A. The monomer m values are larger than expected for the extended histone fold motif, suggesting that the monomers adopt an overly collapsed structure. Stopped-flow refolding-initiated from urea-denatured monomers or the partially folded monomers populated at low denaturant concentrations-yielded essentially identical rates, indicating that monomer folding is productive in the rapid association and folding of the heterodimer. A series of Ala and Gly mutations were introduced into H2A and H2B to probe the importance of helix propensity on the structure and stability of the monomers. The mutational studies show that the central alpha-helix of the histone fold, which makes extensive intermonomer contacts, is structured in H2B but only partially folded in H2A.

Development of indole chemistry to label tryptophan residues in protein for determination of tryptophan surface accessibility

Solvent accessibility can be used to evaluate protein structural models, identify binding sites, and characterize protein conformational changes. The differential modification of amino acids at specific sites enables the accessible surface residues to be identified by mass spectrometry. Tryptophan residues within proteins can be differentially labeled with halocompounds by a photochemical reaction. In this study, tryptophan residues of carbonic anhydrase are reacted with chloroform, 2,2,2-trichloroethanol (TCE), 2,2,2-trichloroacetate (TCA), or 3-bromo-1-propanol (BP) under UV irradiation at 280 nm. The light-driven reactions with chloroform, TCE, TCA, and BP attach a formyl, hydroxyethanone, carboxylic acid, and propanol group, respectively, onto the indole ring of tryptophan. Trypsin and chymotrypsin digests of the modified carbonic anhydrase are used to map accessible tryptophan residues using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Tryptophan reactivity is determined by identifying peptides with tryptophan residues modified with the appropriate label. The reactivity is calculated from the frequency that the modification is identified and a semiquantitative measure of the amount of products formed. Both of these measures of tryptophan reactivity correlate significantly with the accessible surface area of tryptophan residues in carbonic anhydrase determined from the X-ray crystal structure. Therefore the photochemical reaction of halocompounds with tryptophan residues in carbonic anhydrase indicates the degree of solvent accessibility of these residues.

Folding of small disulfide-rich proteins: clarifying the puzzle

The process by which small proteins fold to their native conformations has been intensively studied over the past few decades. The particular chemistry of disulfide-bond formation has facilitated the characterization of the oxidative folding of numerous small, disulfide-rich proteins with results that illustrate a high level of diversity in folding mechanisms, differing in the heterogeneity and native disulfide-bond content of their intermediates. Information from folding studies of these proteins, together with the recent structural determinations of predominant intermediates, has provided new molecular insights into oxidative folding and clarifies the major rules that govern it.

Folding mechanism of FIS, the intertwined, dimeric factor for inversion stimulation

FIS, the factor for inversion stimulation, from Escherichia coli and other enteric bacteria, is an interwined alpha-helical homodimer. Size exclusion chromatography and static light scattering measurements demonstrated that FIS is predominately a stable dimer at the concentrations (1-10 microM monomer) and buffer conditions employed in this study. The folding and unfolding of FIS were studied with both equilibrium and kinetic methods by circular dichroism using urea and guanidinium chloride (GdmCl) as the perturbants. The equilibrium folding is reversible and well-described by a two-state folding model, with stabilities at 10 degrees C of 15.2 kcal mol(-1) in urea and 13.5 kcal mol(-1) in GdmCl. The kinetic data are consistent with a two-step folding reaction where the two unfolded monomers associate to a dimeric intermediate within the mixing time for the stopped-flow instrument (<5 ms), and a slower, subsequent folding of the dimeric intermediate to the native dimer. Fits of the burst phase amplitudes as a function of denaturant showed that the free energy for the formation of the dimeric intermediate constitutes the majority of the stability of the folding (9.6 kcal mol(-1) in urea and 10.5 kcal mol(-1) in GdmCl). Folding-to-unfolding double jump kinetic experiments were also performed to monitor the formation of native dimer as a function of folding delay times. The data here demonstrate that the dimeric intermediate is obligatory and on-pathway. The folding mechanism of FIS, when compared to other intertwined, alpha-helical, homodimers, suggests that a transient kinetic dimeric intermediate may be a common feature of the folding of intertwined, segment-swapped, alpha-helical dimers.

Protein-folding kinetics and mechanisms studied by pulse-labeling and mass spectrometry

The "protein-folding problem" refers to the question of how and why a denatured polypeptide chain can spontaneously fold into a compact and highly ordered conformation. The classical description of this process in terms of reaction pathways has been complemented by models that describe folding as a biased conformational diffusion on a multidimensional energy landscape. The identification and characterization of short-lived intermediates provide important insights into the mechanism of folding. Pulsed hydrogen/deuterium exchange (HDX) methods are among the most powerful tools for studying the properties of kinetic intermediates. Analysis of pulse-labeled proteins by mass spectrometry (MS) provides information that is complementary to that obtained in nuclear magnetic resonance (NMR) studies; NMR data represent an average of entire protein ensembles, whereas MS can detect co-existing protein species. MS-based pulse-labeling experiments can distinguish between folding scenarios that involve parallel pathways, and those where folding is channeled through obligatory intermediates. The proteolytic digestion/MS technique provides spatially resolved information on the HDX pattern of folding intermediates. This method is especially important for proteins that are too large to be studied by NMR. Although traditional pulsed HDX protocols are based on quench-flow techniques, it is also possible to use electrospray (ESI) MS to analyze the reaction mixture on-line and "quasi-instantaneously" after labeling. This approach allows short-lived protein conformations to be studied by their HDX level, their ESI charge-state distribution, and their ligand-binding state. Covalent labeling of free cysteinyl residues provides an alternative approach to pulsed HDX experiments. Another promising development is the use of synchrotron X-rays to induce oxidation at specific sites within a protein for studying their solvent accessibility during folding.

Characterization of an antagonist interleukin-6 dimer by stable isotope labeling, cross-linking, and mass spectrometry

The homodimeric form of a recombinant cytokine interleukin-6 (IL-6(D)) is known to antagonize IL-6 signaling. In this study, spatially proximal residues between IL-6 chains in IL-6(D) were identified using a method for specific recognition of intermolecular cross-linked peptides. Our strategy involved mixing 1:1 (15)N-labeled and unlabeled ((14)N) protein to form a mixture of isotopically labeled and unlabeled homodimers, which was chemically cross-linked. This cross-linked IL-6(D) was subjected to proteolysis by trypsin and the generated peptides were analyzed by electrospray ionization time-of-flight mass spectrometry (MS). Molecular ions from cross-linked peptides of intermolecular origin are labeled with [(15)N/(15)N] + [(15)N/(14)N] + [(14)N/(15)N] + [(14)N/(14)N] yielding readily identified triplet/quadruplet MS peaks. All other peptide species are labeled with [(15)N] + [(14)N] yielding doublet peaks. Intermolecular cross-linked peptides were identified by MS, and cross-linked residues were identified. This intermolecular cross-link detection method, which we have designated "mixed isotope cross-linking" MIX may have more general application to protein-protein interaction studies. The pattern of proximal residues found was consistent with IL-6(D) having a domain-swapped fold similar to IL-10 and interferon-gamma. This fold implies that IL-6(D)-mediated antagonism of IL-6 signaling is caused by obstruction of cooperative gp130 binding on IL-6(D), rather than direct blocking of gp-130-binding sites on IL-6(D).

Studies of biomolecular conformations and conformational dynamics by mass spectrometry

In the post-genomic era, a wealth of structural information has been amassed for proteins from NMR and crystallography. However, static protein structures alone are not a sufficient description: knowledge of the dynamic nature of proteins is essential to understand their wide range of functions and behavior during the life cycle from synthesis to degradation. Furthermore, few proteins have the ability to act alone in the crowded cellular environment. Assemblies of multiple proteins governed by complex signaling pathways are often required for the tasks of target recognition, binding, transport, and function. Mass spectrometry has emerged over the past several years as a powerful tool to address many of these questions. Recent improvements in "soft" ionization techniques have enabled researchers to study proteins and biomolecular complexes, both directly and indirectly. Likewise, continuous improvements in instrumental design in recent years have resulted in a dramatic expansion of the m/z range and resolution, enabling observation of large multi-protein assemblies whose structures are retained in the gas phase. In this article, we discuss some of the mass spectrometric techniques applied to investigate the nature of the conformations and dynamical properties that govern protein function.