Emulsifying Properties Of Biodegradable Polylactide-Grafted Dextran Copolymers

Targeted Therapeutic Nanoparticles: An Immense Promise to Fight against Cancer

In nanomedicine, targeted therapeutic nanoparticle (NP) is a virtual outcome of nanotechnology taking the advantage of cancer propagation pattern. Tying up all elements such as therapeutic or imaging agent, targeting ligand, and cross-linking agent with the NPs is the key concept to deliver the payload selectively where it intends to reach. The microenvironment of tumor tissues in lymphatic vessels can also help targeted NPs to achieve their anticipated accumulation depending on the formulation objectives. This review accumulates the application of poly(lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) based NP systems, with a specific perspective in cancer. Nowadays, PLGA, PEG, or their combinations are the mostly used polymers to serve the purpose of targeted therapeutic NPs. Their unique physicochemical properties along with their biological activities are also discussed. Depending on the biological effects from parameters associated with existing NPs, several advantages and limitations have been explored in teaming up all the essential facts to give birth to targeted therapeutic NPs. Therefore, the current article will provide a comprehensive review of various approaches to fabricate a targeted system to achieve appropriate physicochemical properties. Based on such findings, researchers can realize the benefits and challenges for the next generation of delivery systems.

Quantitative Analysis of Polyacrylamide Grafted on Polylactide Film Surfaces Employing Spectroscopic Techniques

Standard techniques for quantitative measurement of polyacrylamide (PAm) contents grafted on polylactide (PLA) film substrates, P(LA- g-Am- co-MBAm), which are commonly used as cell culture substrates or scaffolds, and pH-sensitive absorbents have been developed with X-ray photoelectron (XPS), proton-nuclear magnetic resonance (¹H-NMR), and Fourier transform infrared (FT-IR) spectroscopy. The techniques are then applied to examine P(LA- g-Am- co-MBAm) samples prepared from two separate photo-initiator/co-initiator systems. Efficiency and accuracy of the techniques are compared. The results from all techniques are in good agreement, indicating high analysis precisions, although FT-IR technique provides additional advantages, in terms of short analysis time, ease of sample preparation, and accessibility of a machine. The results indicate that the riboflavin (RF) initiator system has higher grafting efficiency than its camphorquinone (CQ) counterpart. These standard techniques can be applied in the analysis of these materials and further modified for quantitative analysis of other grafting systems.

Carbohydrate-based amphiphilic nano delivery systems for cancer therapy

Nanoparticles (NPs) are novel drug delivery systems that have been attracting more and more attention in recent years, and have been used for the treatment of cancer, infection, inflammation and other diseases. Among the numerous classes of materials employed for constructing NPs, organic polymers are outstanding due to the flexibility of design and synthesis and the ease of modification and functionalization. In particular, NP based amphiphilic polymers make a great contribution to the delivery of poorly-water soluble drugs. For example, natural, biocompatible and biodegradable products like polysaccharides are widely used as building blocks for the preparation of such drug delivery vehicles. This review will detail carbohydrate based amphiphilic polymeric systems for cancer therapy. Specifically, it focuses on the nature of the polymer employed for the preparation of targeted nanocarriers, the synthetic methods, as well as strategies for the application and evaluation of biological activity. Applications of the amphiphilic polymer systems include drug delivery, gene delivery, photosensitizer delivery, diagnostic imaging and specific ligand-assisted cellular uptake. As a result, a thorough understanding of the relationship between chemical structure and biological properties facilitate the optimal design and rational clinical application of the resulting carbohydrate based nano delivery systems for cancer therapy.

Synthesis, characterization and cyclic voltammetric study of copper(II) and nickel(II) polymer chelates

Graft copolymers based on dextran (Dx) and 2-acrylamido-2-methyl-1-propane sulphonic acid (AMPS) were synthesized by free radical initiated solution polymerization technique using ceric ammonium nitrate as initiator. These graft copolymers were used to prepare Cu(II) and Ni(II) chelates by reactions with Cu(II) and Ni(II) metal ions respectively. Graft copolymer and metal chelates were characterized by elemental analysis, intrinsic viscosity, FT-IR, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and powder X-ray diffraction (XRD). Elemental analysis, intrinsic viscosity and FT-IR studies revealed the incorporation of metal ions to form metal chelates. SEM studies showed the change in morphology due to metal incorporation. From AFM studies it was observed that there was increase in Root mean square (RMS) roughness values in case of metal complexes. Metal chelates were observed to be thermally more stable than graft copolymer from TGA. UV-vis spectroscopy study revealed increase in absorbance values and cyclic voltammetric (CV) studies showed more than tenfold increase in redox current due to formation of Cu(II) and Ni(II) metal chelates. The binding constants of each complex determined by using UV-visible spectroscopy revealed that Cu(II) has more binding ability than Ni(II).

Synthesis and Characterization of Graft Copolymer of Dextran and 2-Acrylamido-2-methylpropane Sulphonic Acid

A novel biodegradable graft copolymer of dextran (Dx) and 2-acrylamido-2-methyl-1-propane sulphonic acid (AMPS) was synthesized by grafting poly-AMPS chains onto dextran backbone by free radical polymerization using ceric ammonium nitrate (CAN) as an initiator. Different amounts of AMPS were used to synthesize four different grades of graft copolymers with different side chain lengths. These grafted polymers were characterized by elemental analysis, FTIR, 1HNMR, rheological technique, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray diffractometry (XRD). They exhibited efficient flocculation performance in kaolin suspension.

Preparação de nanopartículas poliméricas a partir da polimerização de monômeros: parte I

Nanopartículas poliméricas produzidas a partir de polímeros sintéticos, como copolímeros do ácido metacrílico, ésteres acrílicos ou metacrílicos, têm sido amplamente utilizadas na área farmacêutica para encapsulação de princípios ativos. Essas nanopartículas apresentam as vantagens de proteção, liberação controlada, melhor biodisponibilidade e menor toxicidade, proporcionando maior conforto aos pacientes e adesão ao tratamento. A produção das nanopartículas (nanocápsulas e nanosferas) por polimerização de monômeros é revisada e descrita neste artigo, evidenciando os parâmetros tecnológicos que interferem nas características físico-químicas das nanopartículas, como a solubilidade do princípio ativo, o volume e pH do meio de polimerização, a massa molar e concentração do monômero e a natureza e concentração do tensoativo.

Macromolecular surfactants for miniemulsion polymerization

The use of polymeric surfactants as stabilizers in miniemulsion polymerization was reviewed. The structural characteristics of reported polymeric surfactants were detailed and compared. The concept of multi-functional polymeric surfactants was evidenced. The specificities brought by polymeric surfactants in the process of miniemulsion polymerization in comparison to molecular surfactants were analysed for the stability of the initial monomer emulsion, polymerization kinetics and characteristics of the obtained latexes. The contribution of polymeric surfactants to the control of the characteristics of the obtained nanoparticles was detailed with regard to the nature of the core material and to the surface coverage. Polymeric surfactants can be seen as powerful tools for the design of original nanoparticles. On the basis of the available data, possible research topics are suggested.

Poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion polymerization (1): dextran-based surfactants

This study aims at synthesizing polysaccharide-coated poly(n-butyl cyanoacrylate) nanoparticles by miniemulsion polymerization. Because of the high reactivity of n-butyl cyanoacrylate, drastic conditions are required in order to emulsify the monomer in water while limiting its anionic polymerization. However, nanoparticles were successfully obtained by miniemulsion polymerization of butyl cyanoacrylate-in-water emulsions stabilized by amphiphilic dextran derivatives. Their physico-chemical properties were thoroughly investigated as a function of amphiphilic dextran structure and concentration. The substitution degree of the amphiphilic dextran used as stabilizer had little influence on the final properties of the obtained nanoparticles. Particle size decreased with the concentration of amphiphilic dextran in the aqueous phase whereas the hydrophilic layer thickness and the amount of adsorbed polysaccharide were nearly constant in the entire range of concentrations studied.