Functionalization of Magnetic Nanowires by Charged Biopolymers

The cellular response to plasma membrane disruption for nanomaterial delivery

Delivery of nanomaterials into cells is of interest for fundamental cell biological research as well as for therapeutic and diagnostic purposes. One way of doing so is by physically disrupting the plasma membrane (PM). Several methods that exploit electrical, mechanical or optical cues have been conceived to temporarily disrupt the PM for intracellular delivery, with variable effects on cell viability. However, apart from acute cytotoxicity, subtler effects on cell physiology may occur as well. Their nature and timing vary with the severity of the insult and the efficiency of repair, but some may provoke permanent phenotypic alterations. With the growing palette of nanoscale delivery methods and applications, comes a need for an in-depth understanding of this cellular response. In this review, we summarize current knowledge about the chronology of cellular events that take place upon PM injury inflicted by different delivery methods. We also elaborate on their significance for cell homeostasis and cell fate. Based on the crucial nodes that govern cell fitness and functionality, we give directions for fine-tuning nano-delivery conditions.

Potentiometric urea biosensors

Excess nitrogen in the body is converted to urea in the liver, and urea is disposed as a waste product in urine. Urea concentration can change in body fluids such as blood due to the presence of certain disorders. Therefore, the determination of urea is of high importance in various areas including medical diagnosis, as well as food quality control and environmental monitoring. Potentiometric sensors have certain advantages over their alternatives, such as rapidity, portability, cost effectiveness, high sensitivity, easy operation and simple apparatus. Potentiometric urea biosensors based on enzyme urease have been developed using various materials including nanoparticles and films, and also using different methodologies. In this review, we covered potentiometric urea biosensors reported in the literature, and touched upon their certain structure characteristics and performance parameters including detection limit, working concentration range, response time and lifetime, all of which are of practical importance. Each potentiometric urea biosensor has its own advantages and drawbacks, thus the selection of appropriate method depends on the sample to be analyzed, its urea concentration range and other requirements of the particular application. Further research is needed in order to optimize the performance of these devices and to broaden their applicability.

Electrochemical Biosensors Based on Conducting Polymers: A Review

Conducting polymers are an important class of functional materials that has been widely applied to fabricate electrochemical biosensors, because of their interesting and tunable chemical, electrical, and structural properties. Conducting polymers can also be designed through chemical grafting of functional groups, nanostructured, or associated with other functional materials such as nanoparticles to provide tremendous improvements in sensitivity, selectivity, stability and reproducibility of the biosensor’s response to a variety of bioanalytes. Such biosensors are expected to play a growing and significant role in delivering the diagnostic information and therapy monitoring since they have advantages including their low cost and low detection limit. Therefore, this article starts with the description of electroanalytical methods (potentiometry, amperometry, conductometry, voltammetry, impedometry) used in electrochemical biosensors, and continues with a review of the recent advances in the application of conducting polymers in the recognition of bioanalytes leading to the development of enzyme based biosensors, immunosensors, DNA biosensors, and whole-cell biosensors.

Applications, Surface Modification and Functionalization of Nickel Nanorods

The growing number of nanoparticle applications in science and industry is leading to increasingly complex nanostructures that fulfill certain tasks in a specific environment. Nickel nanorods already possess promising properties due to their magnetic behavior and their elongated shape. The relevance of this kind of nanorod in a complex measurement setting can be further improved by suitable surface modification and functionalization procedures, so that customized nanostructures for a specific application become available. In this review, we focus on nickel nanorods that are synthesized by electrodeposition into porous templates, as this is the most common type of nickel nanorod fabrication method. Moreover, it is a facile synthesis approach that can be easily established in a laboratory environment. Firstly, we will discuss possible applications of nickel nanorods ranging from data storage to catalysis, biosensing and cancer treatment. Secondly, we will focus on nickel nanorod surface modification strategies, which represent a crucial step for the successful application of nanorods in all medical and biological settings. Here, the immobilization of antibodies or peptides onto the nanorod surface adds another functionality in order to yield highly promising nanostructures.

Electrochemical synthesis and magnetic characterization of periodically modulated Co nanowires

The synthesis of templates with modulated pore channels by combined mild and hard anodization processes is described. The hard anodization pulses, implemented during anodization, are controlled not only in time length and amplitude, but also in shape: square and exponential signals have been applied. Electrodeposition of Co is subsequently performed to obtain uniform and modulated diameter nanowire arrays. Square and exponential modulated diameter nanowires are imaged by scanning electron microscopy and hcp hexagonal polycrystalline structure is confirmed in all Co nanowires. Magnetic behavior strongly depends on nanowire shape and is interpreted considering the modification of magnetostatic interactions between wires induced by local stray fields from magnetic charges at the ends of the wider segments in modulated wires. As a consequence, magnetization processes under parallel and perpendicular field configurations denote the contribution of both thin and wide segments.

Effect of carboxymethyl groups on degradation of modified pullulan by pullulanase from Klebsiella pneumoniae

Pullulanase is an enzyme that hydrolyses the α-1,6 linkages of pullulan (Pull) to produce maltotriose units. We studied the capacity of pullulanase to cleave its modified substrate: carboxymethylpullulan (CMPull), synthesized with two different degrees of substitution (DS=0.16 and 0.8). Size exclusion chromatography with on line multi angle light scattering and differential refractive index detection (SEC/MALS/DRI) was used to estimate both number and weight average molar masses, respectively, Mn and Mw, of pullulan and CMPulls together with the percentage of maltotriose formed during hydrolysis. Determination of reduced sugars gave also a Mn that is compared to data obtained by SEC. It revealed that CMPull is partially degraded by pullulanase and the rate of hydrolysis decreased with increased DS. At the end of the hydrolysis, Mn is decreased by a factor of 23 and 1.7 for CMPull with a DS of 0.16 and 0.8 respectively. The percentage of produced maltotriose decreased also when increasing DS (24% and 7% for CMPull DS 0.16 and 0.8 respectively). The kinetic properties of pullulanase were also investigated with Pull and CMPulls by isothermal titration calorimetry (ITC) using simple injection method. Based on Michaelis-Menten kinetics, Vmax (maximal velocity) decreased and KM (Michaelis constant) increased when DS of modified pullulan CMPull increased.

Functionalization of organic membranes by polyelectrolyte multilayer assemblies: application to the removal of copper ions from aqueous solutions

The functionalization of an organic polyethersulfone membrane (PES) was performed by alternating deposition of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (PSS), leading to the formation of a polyelectrolyte multilayer film (PEM). The resulting assembly was characterized by tangential streaming potential measurements to determine the charge of the modified membranes as a function of the polyelectrolyte solution concentration and as a function of the immersion time of the membrane in the polyelectrolyte solutions. Then, the modified membranes were used to perform the ultrafiltration of aqueous solutions containing copper(II) ions. Different operating conditions were tested including: polyelectrolyte concentration, polyelectrolyte nature, thickness of the PEM film or pH of the Cu(2+) solutions. These filtration experiments demonstrated that it was possible to obtain a satisfactory retention of the copper ions (88%), thus proving that this type of assembly can be useful for the removal of copper ions from contaminated aqueous solutions.

Structural and magnetic characterization of batch-fabricated nickel encapsulated multi-walled carbon nanotubes

We report on the growth and fabrication of Ni-filled multi-walled carbon nanotubes (Ni-MWNTs) with an average diameter of 115 nm and variable length of 400 nm-1 µm. The Ni-MWNTs were grown using template-assisted electrodeposition and low pressure chemical vapor deposition (LPCVD) techniques. Anodized alumina oxide (AAO) templates were fabricated on Si using a current controlled process. This was followed by the electrodeposition of Ni nanowires (NWs) using galvanostatic pulsed current (PC) electrodeposition. Ni NWs served as the catalyst to grow Ni-MWNTs in an atmosphere of H2/C2H2 at a temperature of 700 °C. Time dependent depositions were carried out to understand the diffusion and growth mechanism of Ni-MWNTs. Characterization was carried out using scanning electron microscopy (SEM), focused ion beam (FIB) milling, transmission electron microscopy (TEM), Raman spectroscopy and energy dispersive x-ray spectroscopy (EDX). TEM analysis revealed that the Ni nanowires possess a fcc structure. To understand the effects of the electrodeposition parameters, and also the effects of the high temperatures encountered during MWNT growth on the magnetic properties of the Ni-MWNTs, vibrating sample magnetometer (VSM) measurements were performed. The template-based fabrication method is repeatable, efficient, enables batch fabrication and provides good control on the dimensions of the Ni-MWNTs.

Characterizing proton relaxation times for metallic and magnetic layer-by-layer-coated, DNA-templated nanoparticle chains

Metallic and superparamagnetic DNA-templated nanoparticle (NP) chains are examined as potential imaging agents. Proton relaxation times (T(1) and T(2)) are measured for DNA nanostructures using nuclear magnetic resonance (NMR) spectroscopy. The layer-by-layer (LBL) method was used to encapsulate the DNA-templated NP chains and demonstrated a change in proton relaxation times. Results from this study suggest that LBL-coated, DNA-templated nanostructures can serve as effective imaging agents for magnetic resonance imaging (MRI) applications.

An experimental study on ferromagnetic nickel nanowires functionalized with antibodies for cell separation

In this paper, a cell separation technique has been explored using antibody-functionalized Ni nanowires. An antibody (anti-CD31) against mouse endothelial cells (MS1) was conjugated to the Ni nanowire surface through self-assembled monolayers (SAMs) and chemical covalent reactions. The measured cytotoxicity was negligible on the CD-31 antibody-functionalized nanowires by the tetrazolium salt (MTT) assay. The use of functionalized nanowires for magnetically separating MS1 cells revealed that the cell separation yield was closely related to cell concentration and the nanowire/cell ratio. Cell separation yield using functionalized Ni nanowires was compared with that using commercial magnetic beads. Considering the volume difference of the material used between the beads and nanowires, antibody-functionalized nanowires showed an obvious advantage in cell separation. Further study on the effect of Ni nanowires on MS1 cells for extended culture confirmed that cell morphology remained comparable to control cells with a lower proliferation rate. This work demonstrates that antibody-functionalized Ni nanowires provide an effective means to separate target cells.