Binding of β-Lactolobulin to Pectins Varying in their Overall and Local Charge Density

An insight into the effect of interaction with protein on antibacterial activity of chitosan derivatives

Antimicrobial activity of chitosan in protein-rich media is of a particular interest for various protein-based drug delivery and other systems. For the first time, bacteriostatic activity of chitosan derivatives in the presence of caseinate sodium (CAS) was studied and discussed. Complexation of chitosan derivatives soluble in acidic (CH and RCH) or alkalescent (RCH) media with CAS was confirmed by fluorescent spectroscopy, turbodimetry, light scattering data and measurement of electrical potentials of CAS/chitosan derivative complexes. An addition of CH and RCH caused a static quenching of CAS. Binding constants Kb determined for CH/CAS and RCH/CAS complexes at pH 6.0 were equal to 29.8 × 106 M-1 and 8.9 × 106 M-1, respectively. Kb value of RCH/CAS complex at pH 7.4 was equal to 1.1 × 105'M-1. The poisoned food method was used for counting the number and the direct measurement of the size of bacterial colonies on the surfaces of turbid agar media containing CAS/chitosan derivative complexex. Complete suppression of E. coli cells growth and restriction of S. aureus cells growth were observed on the surface of acidic media. A high concentration of CAS reduced the activity. The activity of RCH in alkalescent media is low or absent. These results can be promising for preparation of microbiologically stable protein-based drug delivery systems.

Complexes of β-lactoglobulin and high methyl-esterified pectin as a one-shot delivery system for reinforcing oil/water interfaces

Electrostatic complexation of negatively charged polysaccharides with β-lactoglobulin (β-lg) has been shown to bolster the protein films at oil/water interfaces thereby improving emulsion stability. However, recent sub-phase exchange experiments demonstrated that highly charged polysaccharides such as low methyl-esterified pectin are complementary only if sequentially introduced to a pre-formed interfacial β-lg film. In this study, results of transient interfacial shear rheology show that, by using high-methylesterified pectins instead, complexes can be formed in pre-mixed solutions with β-lg at pH 4 that can lead to reinforced protein films at dodecane/water interfaces. Using this one-shot adsorption of such complexes, pectins as well as short chain polysaccharides like homogalacturonan nearly doubled the steady state shear elastic moduli as compared to that of a pure β-lg film. The lag times of film formation were established to be primarily decided by the charge density and pattern on the polysaccharide. Based on the results from mixed solutions of β-lg monomers, it is proposed that the polysaccharide at pH 4 strengthens the resulting interfacial layer by concatenating adsorbed β-lg molecules thereby establishing cross-links in the aqueous phase.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Transient measurement and structure analysis of protein-polysaccharide multilayers at fluid interfaces

The formation of electrostatic protein-polysaccharide multilayers has attracted attention for the design of fluid interfaces with enhanced stability and functionality. However, current techniques are often limited to measuring final multilayer properties. We present an interfacial shear rheology setup with simultaneous subphase exchange, allowing the transient measurement of biopolymer multilayers by their viscoelasticity. The successive and simultaneous adsorption of β-lactoglobulin (β-lg) and low-methoxyl pectin were investigated at the n-dodecane/water interface at pH 4. The successive injection of pectin increased the viscoelasticity of an adsorbed β-lg layer by electrostatic complexation. On the other hand, simultaneous adsorption impeded adsorption kinetics and interfacial layer strength due to complexation in the bulk phase prior to adsorption. Neutron reflectometry at the air-water interface confirmed the formation of an initial β-lg layer and electrostatic complexation of a secondary pectin layer, which desorbed upon pH-induced charge inversion. The layer formed by simultaneous adsorption mainly consisted of β-lg. We conclude that protein-polysaccharide complexes show limited surface activity and result in a lower effective protein concentration available for adsorption.

Pressure-assisted capillary electrophoresis frontal analysis for faster binding constant determination

Adding external pressure during the process of capillary electrophoresis usually add to the band broadening, especially if the pressure induced flow is significant. The resolution is normally negatively affected in pressure-assisted capillary electrophoresis (PACE). Frontal analysis (FA), however, can potentially benefit from using an external pressure while avoiding the drawbacks in other modes of CE. In this work, possible impact from the external pressure was simulated by COMSOL Multiphysics®. Under a typical CE-FA set-up, it was found that the detected concentrations of analyte will not be significantly affected by an external pressure less than 5 psi. Besides, the measured ligand concentration in PACE-FA was also not affected by common variables (molecular diffusion coefficient (10-8 to 10-11 m2 /s), capillary length etc). To provide an experimental proof, PACE-FA is used to study the binding interactions between hydroxypropyl β-cyclodextrin (HP-β-CD) and small ligand molecules. Taking the HP-β-CD /benzoate pair as an example, the binding constants determined by CE-FA (18.3 ± 0.8 M-1 ) and PACE-FA (16.5 ± 0.5 M-1 ) are found to be similar. Based on the experimental results, it is concluded that PACE-FA can reduce the time of binding analysis while maintaining the accuracy of the measurements.

Polysaccharide zeta-potentials and protein-affinity

The ζ-potential, a parameter typically obtained by model-dependent transformation of the measured electrophoretic mobility, is frequently used to understand polysaccharide-protein complexation. We tested the hypothesis that two anionic polysaccharides with identical ζ-potentials would show equal binding affinity to the protein β-lactoglobulin (BLG). We selected two polysaccharide polyelectrolytes (PE) with very different structures: hyaluronic acid (HA) and tragacanthin (TG). Highly precise (±0.1%) turbidimetric titrations were performed to determine critical pH values of complex formation; and PE ζ-potentials were measured for different ionic strengths I at those critical pH values. While phase boundaries (pH_cvs. I) showed that HA binds to BLG more strongly (e.g. at a lower pH, for fixed I), comparisons made at fixed ζ-potential indicated that TG binds more strongly. The source of this contradiction is the effect of the bulky side chains of TG on its friction coefficient which diminishes its mobility and hence the resultant ζ-potential; while having a distinctly separate effect on the interaction between BLG and the carboxylated backbone of TG. Thus, unless the locus of the bound protein coincides with the shear plane, the ζ-potential does not directly contribute to the electrostatic PE-protein interaction.

Sugar-coated proteins: the importance of degree of polymerisation of oligo-galacturonic acid on protein binding and aggregation

We have simplified the structural heterogeneity of protein-polysaccharide binding by investigating protein binding to oligosaccharides. The interactions between bovine beta-lactoglobulin A (βLgA) and oligo-galacturonic acids (OGAs) with various numbers of sugar residues have been investigated with a range of biophysical techniques. We show that the βLgA-OGA interaction is critically dependent on the length of the oligosaccharide. Isothermal titration calorimetry results suggest that a minimum length of 7 or 8 sugar residues is required in order to exhibit appreciable exothermic interactions with βLgA - shorter oligosaccharides show no enthalpic interactions at any concentration ratio. When titrating βLgA into OGAs with more than 7-8 sugar residues the sample solution also became turbid with increasing amounts of βLgA, indicating the formation of macroscopic assemblies. Circular dichroism, thioflavin T fluorescence and small angle X-ray/neutron scattering experiments revealed two structural regimes during the titration. When OGAs were in excess, βLgA formed discrete assemblies upon OGA binding, and no subsequent aggregation was observed. However, when βLgA was present in excess, multi-scale structures were formed and this eventually led to the separation of the solution into two liquid-phases.

β-Lactoglobulin nanofibrils can be assembled into nanotapes via site-specific interactions with pectin

Controlling the self-assembly of individual supramolecular entities, such as amyloid fibrils, into hierarchical architectures enables the 'bottom-up' fabrication of useful bionanomaterials. Here, we present the hierarchical assembly of β-lactoglobulin nanofibrils into the form of 'nanotapes' in the presence of a specific pectin with a high degree of methylesterification. The nanotapes produced were highly ordered, and had an average width of 180 nm at pH 3. Increasing the ionic strength or the pH of the medium led to the disassembly of nanotapes, indicating that electrostatic interactions stabilised the nanotape architecture. Small-angle X-ray scattering experiments conducted on the nanotapes showed that adequate space is available between adjacent nanofibrils to accommodate pectin molecules. To locate the interaction sites on the pectin molecule, it was subjected to endopolygalacturonase digestion, and the resulting products were analysed using capillary electrophoresis and size-exclusion chromatography for their charge and molecular weight, respectively. Results suggested that the functional pectin molecules carry short (<10 residues) enzyme-susceptible blocks of negatively charged, non-methylesterified galacturonic acid residues in the middle of their homogalacturonan backbones (and possibly near their ends), that specifically bind to sites on the nanofibrils. Blocking the interaction sites on the nanofibril surface using small oligomers of non-methylesterified galacturonic acid residues similar in size to the interaction sites of the pectin molecule decreased the nanotape formation, indicating that site-specific electrostatic interactions are vital for the cross-linking of nanofibrils. We propose a structural model for the pectin-cross-linked β-lactoglobulin nanotapes, the elements of which will inform the future design of bionanomaterials.

Polysaccharides from Moringa oleifera gum: structural elements, interaction with β-lactoglobulin and antioxidative activity

Structural highlights of an antioxidative arabinogalactan from Moringa oleifera gum that interacts with β-lactoglobulin.

Complexation of high methoxyl pectin with ethanol desolvated whey protein nanoparticles: physico-chemical properties and encapsulation behaviour

Using a desolvation method, whey protein isolate (WPI) nanoparticles were prepared and mixed with high methoxyl pectin (HMP) solutions (DE 72.8) to form WPI-HMP supramolecular complexes at low pH. Aqueous dispersions containing 5% WPI at pH 9 were desolvated with ethanol, and then diluted in HMP solutions at pH 3. Changes in particle size of the HMP-WPI complexes were studied as a function of HMP concentration. Upon dilution of the WPI nanoparticles in 0.05% HMP at pH 3, the average apparent diameter (d(90)) was around 270 nm, and there were no differences with desolvation level. These nanoparticles would undergo coarsening with storage at room temperature. The complexes showed to withstand homogenization and although heating increased aggregation, the particle size of the heated suspensions improved after homogenization. In addition, the suspensions demonstrated higher interfacial pressures (measured by drop tensiometry) compared to the corresponding unprocessed, desolvated or heated WPI solutions, suggesting their employment as surface active ingredients. The encapsulation efficiency of the desolvated WPI suspensions and desolvated WPI-HMP complex suspensions was studied using a model hydrophilic dye. In all cases, appreciable amounts of dye molecule were encapsulated and retained by the nanoparticles during storage at pH 3.

Neutral coatings for the study of polycation/multicharged anion interactions by capillary electrophoresis: application to dendrigraft poly-L-lysines with negatively multicharged molecules

The study of interactions between oppositely multicharged (macro)molecules remains a challenging issue. In frontal analysis capillary electrophoresis (FACE), it is difficult to avoid the adsorption of one of the interacting partners onto the capillary wall. In this work, we demonstrate the possibility to use FACE and affinity capillary electrophoresis (ACE) on a neutrally coated capillary for the study of interactions between a polycationic dendrigraft (or linear) poly-l-lysines, on one hand, and a multicharged anionic biomolecule (adenosine monophosphate, AMP, or adenosine triphosphate, ATP), on the other hand. A systematic comparison of four different neutral coatings (hydroxypropyl cellulose, polydimethylacrylamide, polyacrylamide, polyethylene glycol) has been performed based on the repeatability of the electrophoretic migration of the dendrigraft poly-l-lysines at pH close to neutrality. Both FACE and ACE methodogies were then used to study the interactions and to get the association constants and the stoichiometry of the complex. Multisite interactions, with two classes of independent sites, were determined. The specificity of the dendritic polylysine structure compared with linear polylysine in the interaction with ATP or AMP is also emphasized.

Protein adsorption onto polyelectrolyte layers: effects of protein hydrophobicity and charge anisotropy

Ellipsometry was used to investigate the influence of ionic strength (I) and pH on the adsorption of bovine serum albumin (BSA) or beta-lactoglobulin (BLG) onto preabsorbed layers of two polycations: poly(diallyldimethylammonium chloride) (PDADMAC) or poly(4-vinylpyridine bromide) quaternized with linear aliphatic chains of two (QPVP-C2) or five (QPVP-C5) carbons. Comparisons among results for the three polycations reveal hydrophobic interactions, while comparisons between BSA and BLG-proteins of very similar isoelectric points (pI)-indicate the importance of protein charge anisotropy. At pH close to pI, the ionic strength dependence of the adsorbed amount of protein (Gamma) displayed maxima in the range 10 < I < 25 mM corresponding to Debye lengths close to the protein radii. Visualization of protein charge by Delphi suggested that these ionic strength conditions corresponded to suppression of long-range repulsion between polycations and protein positive domains, without diminution of short-range attraction between polycation segments and locally negative protein domains, in a manner similar to the behavior of PE-protein complexes in solution. (1-4) This description was consistent with the disappearance of the maxima at pH either above or below pI. In the former case, Gamma values decrease exponentially with I(1/2), due to screening of attractions, while in the latter case adsorption of both proteins decreased at low I due to strong repulsion. Close to or below pI both proteins adsorbed more strongly onto QPVP-C5 than onto QPVP-C2 or PDADMAC due to hydrophobic interactions with the longer alkyl group. Above pI, the adsorption was more pronounced with PDADMAC because these chains may assume more loosely bound layers due to lower linear charge density.