Measuring the interaction forces between protein inclusion bodies and an air bubble using an atomic force microscope

Probing Interactions between Air Bubble and Hydrophobic Polymer Surface: Impact of Solution Salinity and Interfacial Nanobubbles

The interactions between air bubbles and hydrophobic polymer surfaces in aqueous media play important roles in many industrial and engineering processes. In this work, the interaction forces between air bubble and a model hydrophobic polymer-polystyrene (PS) in NaCl solutions (1 mM to 1000 mM) were directly measured using a bubble probe atomic force microscope (AFM) technique, and the measured forces were analyzed by a theoretical model based on Reynolds lubrication theory and augmented Young-Laplace equation including the influence of disjoining pressure. It was found that the theoretical analysis, by assuming that the PS surface was a pristine and bare polymer surface in aqueous solutions, could not fully agree with the experimental force measurements at intermedium salinity condition (i.e., 100 mM NaCl), and the discrepancy could not be described by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory even including the effects of non-DLVO interactions such as hydrophobic interaction. Atomic force microscope (AFM) imaging demonstrated that the above discrepancy was caused by the presence of interfacial nanobubbles (INBs) on the hydrophobic PS surface. The solution salinity was found to significantly affect the size and surface coverage of INBs on the PS surface, thereby influencing the surface forces. At high NaCl concentration (e.g., 500 and 1000 mM), the INB formation (and its impact on the surface interactions) and electric double layer repulsion were highly suppressed, and the bubble-PS attachment was observed attributing to their hydrophobic attraction with a decay length of ∼0.75 ± 0.05 nm. The results agree with our previous surface force measurements between two PS surfaces using a surface forces apparatus. This work provides useful insights into the interaction mechanism between air bubbles and hydrophobic polymer surfaces, as well as the influence of solution salinity and interfacial nanobubbles on the bubble-polymer interaction.

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.

Strategy for selection of methods for separation of bioparticles from particle mixtures

The desired product of bioprocesses is often produced in particulate form, either as an inclusion body (IB) or as a crystal. Particle harvesting is then a crucial and attractive form of product recovery. Because the liquid phase often contains other bioparticles, such as cell debris, whole cells, particulate biocatalysts or particulate by-products, the recovery of product particles is a complex process. In most cases, the particulate product is purified using selective solubilization or extraction. However, if selective particle recovery is possible, the already high purity of the particles makes this downstream process more favorable. This work gives an overview of typical bioparticle mixtures that are encountered in industrial biotechnology and the various driving forces that may be used for particle-particle separation, such as the centrifugal force, the magnetic force, the electric force, and forces related to interfaces. By coupling these driving forces to the resisting forces, the limitations of using these driving forces with respect to particle size are calculated. It shows that centrifugation is not a general solution for particle-particle separation in biotechnology because the particle sizes of product and contaminating particles are often very small, thus, causing their settling velocities to be too low for efficient separation by centrifugation. Examples of such separation problems are the recovery of IBs or virus-like particles (VLPs) from (microbial) cell debris. In these cases, separation processes that use electrical forces or fluid-fluid interfaces show to have a large potential for particle-particle separation. These methods are not yet commonly applied for large-scale particle-particle separation in biotechnology and more research is required on the separation techniques and on particle characterization to facilitate successful application of these methods in industry.

Direct measurements of particle-bubble interactions

The essence of mineral flotation is the formation of strong particle-bubble aggregates. Hydrodynamics and DLVO forces hinder the particle-bubble approach, however the presence of a hydrophobic surface results in hydrophobic attraction and strong aggregate formation. In this article we review literature where the colloid probe technique has been used to investigate flotation, primarily particle-bubble interactions in aqueous solution. In some instance particles-bubble interactions have used to quantify the hydrophobic force, whilst hydrophobic forces are crucial for particle-bubble attachment, studies of hydrophobic forces are not the main focus of this article.