Enzyme reaction engineering: effect of methanol on the synthesis of antibiotics catalyzed by immobilized penicillin G acylase under isothermal and non-isothermal conditions

Improving biocatalysis of cefaclor with penicillin acylase immobilized on magnetic nanocrystalline cellulose in deep eutectic solvent based co-solvent

Deep eutectic solvent (DES), has been considered as a new type of green solvent applied in enzymatic systems. Here, we reported DES-buffer co-solvent as a novel reaction medium for high efficient synthesis of cefaclor by penicilin acylase immobilized on magnetic nanocrystalline cellulose. Effect of DES composition, DES-buffer ratio, temperature, pH, substrate ratio and substrate concentration was systematically investigated. In co-solvent consisting of choline chloride (ChCl):glycol-buffer (7:3, v/v), conversion of 7-ACCA was 94%, synthesis to hydrolysis ratio was 1.8, and yield of cefaclor reached 91%, higher than that in aqueous buffer with optimized yield of 84%, showing the great potential of DES as organic solvent alternative. To the best of our knowledge, this is the first example of biosynthesis of cefaclor in the DES-buffer co-solvent.

Hollow-Fiber Enzyme Reactor Operating under Nonisothermal Conditions

A hollow-fiber enzyme reactor, operating under isothermal and nonisothermal conditions, was built employing a polypropylene hollow fiber onto which beta-galactosidase was immobilized. Hexamethylenediamine and glutaraldehyde were used as spacer and coupling agent, respectively. Glucose production was studied as a function of temperature, substrate concentration, and size of the transmembrane temperature gradient. The actual average temperature differences across the polypropylene fiber, to which reference was done to evaluate the effect of the nonisothermal conditions, were calculated by means of a mathematical approach, which made it possible to know, using computer simulation, the radial and axial temperature profiles inside the bioreactor and across the membrane. Percent activity increases, proportional to the size of the temperature gradients, were found when the enzyme activities under nonisothermal conditions were compared to those measured under comparable isothermal conditions. Percent reductions of the production times, proportional to the applied temperature gradients, were also calculated. The advantage of employing nonisothermal bioreactors in biotechnological industrial process was discussed.

Kinetics of β-lactam antibiotics synthesis by penicillin G acylase (PGA) from the viewpoint of the industrial enzymatic reactor optimization

Competition with well-established, fine-tuned chemical processes is a major challenge for the industrial implementation of the enzymatic synthesis of beta-lactam antibiotics. Enzyme-based routes are acknowledged as an environmental-friendly approach, avoiding organochloride solvents and working at room temperatures. Among different alternatives, the kinetically controlled synthesis, using immobilized penicillin G acylase (PGA) in aqueous environment, with the simultaneous crystallization of the product, is the most promising one. However, PGA may act either as a transferase or as a hydrolase, catalyzing two undesired side reactions: the hydrolysis of the acyl side-chain precursor (an ester or amide, a parallel reaction) and the hydrolysis of the antibiotic itself (a consecutive reaction). This review focuses specially on aspects of the reactions' kinetics that may affect the performance of the enzymatic reactor.

Colorimetric detection of polynucleotides on polypropylene slices

The gold-label-silver-stain method (GLSS) for DNA hybridization detection has been receiving increased interest as a colorimetric detective method, demonstrating the advantages of non-radioactivity, non-quenching effect of fluorescence and simplicity for analytical equipment. A colorimetric detection based on the GLSS method was applied to DNA arrays in situ synthesized on polypropylene (PP) slices. In this paper a simple plasma treatment was employed to graft amino (-NH2) on the polypropylene slice surfaces, where DNA probes were immobilized via in situ synthesis. Hybridization was accomplished by a sandwich hybridization format. With the amplification of Silver Enhancer Solution, the hybridization signals were recorded with a scanner. A target DNA concentration as low as 100 fM was detected. Complementary and mismatched sequences were clearly distinguished, and the ratio of the background-subtracted gray scale values for a perfect match, single-base mismatch, 2-base mismatch and 3-base mismatch is 22:16:9:4. The sensitivity of the in situ synthesis system was 3 orders of magnitude higher than that of the spotting system, and the signals of the former were about 2-times stronger than that of the latter under the same target DNA concentration.

Recent biotechnological interventions for developing improved penicillin G acylases

Penicillin G acylase (PAC; EC 3.5.1.11) is the key enzyme used in the industrial production of beta-lactam antibiotics. This enzyme hydrolyzes the side chain of penicillin G and related beta-lactam antibiotics releasing 6-amino penicillanic acid (6-APA), which is the building block in the manufacture of semisynthetic penicillins. PAC from Escherichia coli strain ATCC 11105, Bacillus megaterium strain ATCC 14945 and mutants of these two strains is currently used in industry. Genes encoding for PAC from various bacterial sources have been cloned and overexpressed with significant improvements in transcription, translation and post-translational processing. Recent developments in enzyme engineering have shown that PAC can be modified to gain conformational stability and desired functionality. This review provides an overview of recent advances in the production, stabilization and application of PAC, highlighting the recent biotechnological approaches for the improved catalysis of PAC.