Surface Chemistry of Biodegradable Polymers for Drug Delivery Systems

Synthesis and catalytic activity of single-site group V alkoxide complexes for the ring-opening polymerization of ε-caprolactone

The synthesis, characterization, and ring-opening polymerization (ROP) activity of a family of niobium and tantalum alkoxide catalysts was studied. The final catalysts are made in a two-step synthesis, first by reacting the desired homoleptic metal ethoxide with a phenolketoimine ligand to form a series of synthetic intermediates, followed by reaction with catechol to produce a catalytic platform with a single ethoxide initiator. By using two separate ligands, the electronic properties of the catalyst can be tuned, and the molecular weight of the polymer can be increased. It was found that synthetic intermediates adopted a mer geometry both in solution and in the solid state. This mer geometry was retained for the final catechol derivatives, however in one case, where catechol was substituted for 3-methoxycatechol, the molecule adopted a highly distorted fac geometry. Catalytic ROP activity of the synthetic intermediates and final catechol derivatives with ε-caprolactone was studied through a kinetic analysis. In all seven cases studied the reactions proceeded through the expected coordination-insertion mechanism, following pseudo first-order kinetics and increasing in Mn linearly vs. conversion. The single-initiator catechol derivatives increased the Mn by three times compared to that of the three-initiator synthetic intermediates with little decrease in the overall reaction rate. Both the nature of the ligand and metal were found to impact the rate of reaction in these systems. By switching from an electron donating ligand to an electron withdrawing ligand, the rate was found to nearly double. Tantalum species were faster than their niobium counterparts by ∼3 times in the synthetic intermediates and ∼1.5 times in the catechol derivatives. This observed periodicity supports recent literature findings in this area.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

Cytotoxicity studies and antibacterial modification of poly(ethylene 2,5-furandicarboxylate) nonwoven

Novel poly(ethylene 2,5-furandicarboxylate) PEF nonwovens were produced by solution electrospinning and further modification. To improve the wettability of the hydrophobic nonwovens with water, they were treated with sodium hydroxide. Cytotoxicity tests carried out with human keratinocytes confirmed that the nonwovens did not have a toxic effect on healthy cells. The hydrophilicity of the sodium hydroxide treated nonwoven favored the adherence of the cells and their growth. In turn, the two-step modification of the nonwovens by reactions with (3-mercaptopropyl)methyldimethoxysilane and silver nitrate permitted to deposit silver particles on the fiber surfaces. The bacteria growth inhibition zones around the tested specimens were observed evidencing their antibacterial activity against Escherichia coli and Staphylococcus aureus.

Influence of Molecular Weight on the Enzymatic Degradation of PLA Isomer Blends by a Langmuir System

Polylactides (PLAs) and lactide copolymers are biodegradable, compostable, and derived from renewable resources, offering a sustainable alternative to petroleum-based synthetic polymers owing to their advantages of comparable mechanical properties with commodity plastics and biodegradability. Their hydrolytic stability and thermal properties can affect their potential for long-lasting applications. However, stereocomplex crystallization is a robust method between isomer PLAs that allows significant amelioration in copolymer properties, such as thermal stability, mechanical properties, and biocompatibility, through substantial intermolecular interactions amid l-lactyl and d-lactyl sequences, which have been the key approach to initial degradation rate and further PLA applications. It was demonstrated that the essential parameters affecting stereocomplexation are the mixing ratio and the chain length of each unit sequence. This study deals with the molecular weight, one of the specific interactions between isomers of PLAs. A solution polymerization method was applied to control molecular weight and chain architecture. The stereocomplexation was monitored with DSC. It was confirmed that the lower molecular weight polymer showed a higher degradation rate, as a hydrolyzed fragment having a molecular weight below a certain length dissolves into the water. To systematically explore the critical contribution of molecular weights, the Langmuir system was used to observe the stereocomplexation effect and the overall degradation rate.

Degradation Behavior of Poly(Lactide-Co-Glycolide) Monolayers Investigated by Langmuir Technique: Accelerating Effect

Among biodegradable polymers, polylactides (PLAs) have attracted considerable interest because the monomer can be produced from renewable resources. Since their initial degradability strongly affects commercial application fields, it is necessary to manage the degradation properties of PLAs to make them more commercially attractive. To control their degradability, poly(lactide-co-glycolide) (PLGA) copolymers of glycolide and isomer lactides (LAs) were synthesized, and their enzymatic and alkaline degradation rates of PLGA monolayers as functions of glycolide acid (GA) composition were systematically investigated by the Langmuir technique. The results showed that the alkaline and enzymatic degradations of PLGA monolayers were faster than those of l-polylactide (l-PLA), even though proteinase K is selectively effective in the l-lactide (l-LA) unit. Alkaline hydrolysis was strongly affected by their hydrophilicity, while the surface pressure of monolayers for enzymatic degradations was a major factor.

An Overview of Polymeric Nanoparticles-Based Drug Delivery System in Cancer Treatment

Cancer is recognized as one of the world's deadliest diseases, with more than 10 million new cases each year. Over the past 2 decades, several studies have been performed on cancer to pursue solutions for effective treatment. One of the vital benefits of utilizing nanoparticles (NPs) in cancer treatment is their high adaptability for modification and amalgamation of different physicochemical properties to boost their anti-cancer activity. Various nanomaterials have been designed as nanocarriers attributing nontoxic and biocompatible drug delivery systems with improved bioactivity. The present review article briefly explained various types of nanocarriers, such as organic-inorganic-hybrid NPs, and their targeting mechanisms. Here a special focus is given to the synthesis, benefits, and applications of polymeric NPs (PNPs) involved in various anti-cancer therapeutics. It has also been discussed about the drug delivery approach by the functionalized/encapsulated PNPs (without/with targeting ability) that are being applied in the therapy and diagnostic (theranostics). Overall, this review can give a glimpse into every aspect of PNPs, from their synthesis to drug delivery application for cancer cells.

On the Interfacial Behavior of Catenated Poly(l-lactide) at the Air-Water Interface

Interfacial properties of polymeric materials are significantly influenced by their architectural structures and spatial features, while such a study of topologically interesting macromolecules is rarely reported. In this work, we reported, for the first time, the interfacial behavior of catenated poly(l-lactide) (C-PLA) at the air-water interface and compared it with its linear analogue (L-PLA). The isotherms of surface pressure-area per repeating unit showed significant interfacial behavioral differences between the two polymers with different topologies. Isobaric creep experiments and compression-expansion cycles also showed that C-PLA demonstrated higher stability at the air-water interface. Interestingly, when the films at different surface pressures were transferred via the Langmuir-Blodgett method, successive atomic force microscopy imaging displayed distinct nanomorphologies, in which the surface of C-PLA exhibited nanofibrous structures, while that of the L-PLA revealed a smoother topology with less fiber-like structures.

Salt additives as activity boosters: a simple strategy to access heterometallic cooperativity in lactide polymerisation

Inorganic salt additives can activate carbonyl groups towards organic addition reactions. Here, we translate this concept to ring-opening polymerisation for the first time, generating heterometallic ProPhenol catalysts in situ, which show similar activity enhancements to pre-formed heterometallic complexes. Extremely high activities are observed, with K/Mg and K/Ca combinations converting >85 eq. lactide in 5 s at room temperature.

Heterometallic cooperativity in divalent metal ProPhenol catalysts: combining zinc with magnesium or calcium for cyclic ester ring-opening polymerisation

The first heterobimetallic lactide ROP catalysts based on two divalent metals outperform the homobimetallic analogues, attributed to the increased Lewis acidity of Mg or Ca (monomer coordination) and enhanced polarity of Zn–Et/OR (propagation).

Co-Delivery of Paclitaxel and shMCL-1 by Folic Acid-Modified Nonviral Vector to Overcome Cancer Chemotherapy Resistance

Acquired chemoresistance presents a major clinical impediment, which is an urgent problem to be solved. Interestingly, myeloma cell leukemia-1 (MCL-1) and folate receptor expression levels are higher in chemotherapy-resistant patients than in pretreatment patients. In this study, a multifunctional folic acid (FA)-targeting core-shell structure is presented for simultaneous delivery of shMCL-1 and paclitaxel (PTX). The transfection efficiency of shMCL-1 with the FA-targeting delivery system is higher than with a nontargeting delivery system in Skov3 and A2780T cells. The FA-targeting system significantly inhibits cell growth, blocks cell cycles, and promotes apoptosis of cancer cells in vitro. The mechanisms involved in inhibiting growth are related to Bcl-2/Bax and cdc2/Cyclin B1 pathways. An analysis of RNA sequencing suggests that shMCL-1 reverses chemoresistance through regulating genes such as regulator of chromosome condensation 2 (RCC2). The synergetic effect of shMCL-1 and PTX effectively inhibits tumor growth in both PTX-resistant and normal cancer models by inducing tumor apoptosis, inhibiting proliferation, and limiting tumor angiogenesis. The study results indicate that a FA-targeting delivery system combining shMCL-1 with PTX can simultaneously target tumor sites and restore the sensitivity of chemotherapy-resistant cancer to PTX. These findings have important implications for patients with normal or PTX-resistant cancer.

Titanium ONN-(phenolate) Alkoxide Complexes: Unique Reaction Kinetics for Ring-Opening Polymerization of Cyclic Esters

The synthesis, characterization, and polymerization kinetics of four new titanium ONN-(phenolate) alkoxide catalysts were studied. Each catalyst is fluxional at room temperature, suggesting the ligand amine arm may be labile, but adopts a fac geometry in solution at low temperature (223 K) and in the solid state. All catalysts are active for the ring-opening polymerization of both ε-caprolactone (CL) and rac-lactide (LA). GPC analysis indicates that the well-known coordination-insertion mechanism is being followed. However, whereas the typical first-order dependence on monomer concentration is observed in CL, an unexpected zeroth-order dependence is observed with LA. This suggests that, in the case of LA, catalyst saturation occurs and a Michaelis-Menten model can be used to explain the kinetics. An initial mechanism is discussed within this model that proposes CL polymerization proceeds by a 7-coordinate intermediate, whereas LA polymerization adopts a 6-coordinate intermediate, facilitated by the ligand amine arm. Attempts to isolate catalyst-monomer intermediates are ongoing.

Biophotoelectrochemistry for renewable energy and environmental applications

Biophotoelectrochemistry (BPEC) is an interdisciplinary research field and combines bioelectrochemistry and photoelectrochemistry through the utilization of the catalytic abilities of biomachineries and light harvesters to accomplish the production of energy or chemicals driven by solar energy. The BPEC process may act as a new approach for sustainable green chemistry and waste minimization. This review provides the state-of-the-art introduction of BPEC basics and systems, with a focus on light harvesters and biocatalysts, configurations, photoelectron transfer mechanisms, and the potential applications in energy and environment. Several examples of BPEC applications are discussed including H2 production, CO2 reduction, chemical synthesis, pollution control, and biogeochemical cycle of elements. The challenges about BPEC systems are identified and potential solutions are proposed. The review aims to encourage further research of BPEC toward development of practical BPEC systems for energy and environmental applications.

Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications

In the determination of the bioavailability of drugs administered orally, the drugs' solubility and permeability play a crucial role. For absorption of drug molecules and production of a pharmacological response, solubility is an important parameter that defines the concentration of the drug in systemic circulation. It is a challenging task to improve the oral bioavailability of drugs that have poor water solubility. Most drug molecules are either poorly soluble or insoluble in aqueous environments. Polymer nanocomposites are combinations of two or more different materials that possess unique characteristics and are fused together with sufficient energy in such a manner that the resultant material will have the best properties of both materials. These polymeric materials (biodegradable and other naturally bioactive polymers) are comprised of nanosized particles in a composition of other materials. A systematic search was carried out on Web of Science and SCOPUS using different keywords, and 485 records were found. After the screening and eligibility process, 88 journal articles were found to be eligible, and hence selected to be reviewed and analyzed. Biocompatible and biodegradable materials have emerged in the manufacture of therapeutic and pharmacologic devices, such as impermanent implantation and 3D scaffolds for tissue regeneration and biomedical applications. Substantial effort has been made in the usage of bio-based polymers for potential pharmacologic and biomedical purposes, including targeted deliveries and drug carriers for regulated drug release. These implementations necessitate unique physicochemical and pharmacokinetic, microbiological, metabolic, and degradation characteristics of the materials in order to provide prolific therapeutic treatments. As a result, a broadly diverse spectrum of natural or artificially synthesized polymers capable of enzymatic hydrolysis, hydrolyzing, or enzyme decomposition are being explored for biomedical purposes. This summary examines the contemporary status of biodegradable naturally and synthetically derived polymers for biomedical fields, such as tissue engineering, regenerative medicine, bioengineering, targeted drug discovery and delivery, implantation, and wound repair and healing. This review presents an insight into a number of the commonly used tissue engineering applications, including drug delivery carrier systems, demonstrated in the recent findings. Due to the inherent remarkable properties of biodegradable and bioactive polymers, such as their antimicrobial, antitumor, anti-inflammatory, and anticancer activities, certain materials have gained significant interest in recent years. These systems are also actively being researched to improve therapeutic activity and mitigate adverse consequences. In this article, we also present the main drug delivery systems reported in the literature and the main methods available to impregnate the polymeric scaffolds with drugs, their properties, and their respective benefits for tissue engineering.

Advances in heterometallic ring-opening (co)polymerisation catalysis

Truly sustainable plastics require renewable feedstocks coupled with efficient production and end-of-life degradation/recycling processes. Some of the most useful degradable materials are aliphatic polyesters, polycarbonates and polyamides, which are often prepared via ring-opening (co)polymerisation (RO(CO)P) using an organometallic catalyst. While there has been extensive research into ligand development, heterometallic cooperativity offers an equally promising yet underexplored strategy to improve catalyst performance, as heterometallic catalysts often exhibit significant activity and selectivity enhancements compared to their homometallic counterparts. This review describes advances in heterometallic RO(CO)P catalyst design, highlighting the overarching structure-activity trends and reactivity patterns to inform future catalyst design.

Fabrication of PAMAM antimicrobial monolayer via UV induced grafting on the surface of polyethylene terephthalate

Poly (amidoamine) (PAMAM) with 3rd and 5th generation was covalently grafted as the contact active biocidal agent on the surface of polyethylene terephthalate (PET) with the help of UV induced carbene chemistry (PAMAM-g-PET). The graft density and the surface roughness were controlled by turning UV irradiation time and the PAMAM generation. The PAMAM graft monolayer was characterized via the contact angle, XPS, nanoIR, SEM and AFM. The antibacterial ability of PAMAM-g-PET was evaluated ex-vivo with the help of laser scanning confocal microscope (CLSM), and the results indicated that the decorated PET was able to kill both S. aureus and E. coli in the aqueous environment. Increasing the surface graft concentration and using the dendrimer with higher generation enhanced the lethality towards the bacterial. The decorated film was still able to kill the contact bacterial strain when the cationic primary amine groups were shielded by acetyl chloride, however, the bacterial in the suspension was hardly affected in this case. The un-selectivity and instantaneity of carbene chemistry endowed this grafting strategy the potential to be extended to other organic substances.

Human metabolite-derived alkylsuccinate/dilinoleate copolymers: from synthesis to application

The advances in polymer chemistry have allowed the preparation of biomedical polymers using human metabolites as monomers that can hold unique properties beyond the required biodegradability and biocompatibility. Herein, we demonstrate the use of endogenous human metabolites (succinic and dilinoleic acids) as monomeric building blocks to develop a new series of renewable resource-based biodegradable and biocompatible copolyesters. The novel copolyesters were characterized in detail employing several standard techniques, namely 1H NMR, 13C NMR, and FTIR spectroscopy and SEC, followed by an in-depth thermomechanical and surface characterization of their resulting thin films (DSC, TGA, DMTA, tensile tests, AFM, and contact angle measurements). Also, their anti-fungal biofilm properties were assessed via an anti-fungal biofilm assay and the biological properties were evaluated in vitro using relevant human-derived cells (human mesenchymal stem cells and normal human dermal fibroblasts). These novel highly biocompatible polymers are simple and cheap to prepare, and their synthesis can be easily scaled-up. They presented good mechanical, thermal and anti-fungal biofilm properties while also promoting cell attachment and proliferation, outperforming well-known polymers used for biomedical applications (e.g. PVC, PLGA, and PCL). Moreover, they induced morphological changes in the cells, which were dependent on the structural characteristics of the polymers. In addition, the obtained physicochemical and biological properties can be design-tuned by the synthesis of homo- and -copolymers through the selection of the diol moiety (ES, PS, or BS) and by the addition of a co-monomer, DLA. Consequently, the copolyesters presented herein have high application potential as renewable and cost-effective biopolymers for various biomedical applications.

Combining alkali metals and zinc to harness heterometallic cooperativity in cyclic ester ring-opening polymerisation

Heterometallic cooperativity is an emerging strategy to elevate polymerisation catalyst performance. Here, we report the first heterotrimetallic Na/Zn₂ and K/Zn₂ complexes supported by a ProPhenol ligand, which deliver “best of both” in cyclic ester ring-opening polymerisation, combining the outstanding activity (Na/K) and good control (Zn₂) of homometallic analogues. Detailed NMR studies and density-functional theory calculations suggest that the Na/Zn₂ and K/Zn₂ complexes retain their heterometallic structures in the solution-state. To the best of our knowledge, the K/Zn₂ analogue is the most active heterometallic catalyst reported for rac-lactide polymerisation (k_obs = 1.7 × 10⁻² s⁻¹), giving activities five times faster than the Na/Zn₂ complex. These versatile catalysts also display outstanding performance in ε-caprolatone and δ-valerolactone ring-opening polymerisation. These studies provide underpinning methodologies for future heterometallic polymerisation catalyst design, both in cyclic ester polymerisation and other ring-opening (co)polymerisation reactions.

Cooperative heterotrimetallic Na/Zn₂ and K/Zn₂ complexes combine the excellent activities and control of the homometallic analogues, giving “best of both” in cyclic ester ring-opening polymerisation.

Disassembly of Nanospheres with a PEG Shell upon Adsorption onto PEGylated Substrates

Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.

Lithium, sodium, potassium and calcium amine-bis(phenolate) complexes in the ring-opening polymerization of rac-lactide

Compounds of Li, Na, K and Ca of a tetradentate amino-bis(phenolato) ligand were prepared. Bimetallic compounds formulated as M₂[L](THF)_n (where M = Na, n = 1 (1·THF) or Li, n = 1 (2·THF)) were synthesized via the reaction of H₂[L] (where [L] = 2-pyridylmethylamino-N,N-bis(2-methylene-4-methoxy-6-tert-butylphenolato) with sodium hydride or n-butyllithium, respectively, in THF. Monometallic complexes MH[L](THF)_n (where M = Na, n = 1 (3·THF), Li, n = 0 (4) and K, n = 0 (5)) were obtained by reaction of H₂[L] with MN(SiMe₃)₂ where M = Na, Li, or K. Calcium complex Ca[L](THF) (6·THF) was synthesized in two ways; reaction of Na₂[L] with calcium iodide in THF, and reaction of Ca[N(SiMe₃)₂]₂ with H₂[L] in toluene. Compounds 1-6 exhibit activity for rac-lactide polymerization under melt and solution conditions. Moderate control of polymer molecular weights was achieved in toluene, whereas polydisperse polymer was obtained under solvent free conditions. MALDI-TOF MS analysis of the polymer end groups revealed a predominantly cyclic nature for the polylactides.

Amphiphilic multicomponent molecular brushes

Multicomponent molecular brushes containing amphiphilic polymer moieties are promising objects of research of macromolecular chemistry. The development of stimulus-responsive systems sensitive to changes in environmental parameters, based on the molecular brushes, opens up new possibilities for their applications in medicine, biochemistry and microelectronics. The review presents the current understanding of the structures of main types of amphiphilic multicomponent brushes, depending on the chemical nature and type of coupling of the backbone and side chains. The approaches to the controlled synthesis of multicomponent molecular brushes of different architecture are analyzed. Self-assembly processes of multicomponent molecular brushes in selective solvents are considered.

The bibliography includes 259 references.

Biodegradable Antibacterial Polymeric Nanosystems: A New Hope to Cope with Multidrug-Resistant Bacteria

The human society is faced with daunting threats from bacterial infections. Over decades, a variety of antibacterial polymeric nanosystems have exhibited great promise for the eradication of multidrug-resistant bacteria and persistent biofilms by enhancing bacterial recognition and binding capabilities. In this Review, the "state-of-the-art" biodegradable antibacterial polymeric nanosystems, which could respond to bacteria environments (e.g., acidity or bacterial enzymes) for controlled antibiotic release or multimodal antibacterial treatment, are summarized. The current antibacterial polymeric nanosystems can be categorized into antibiotic-containing and intrinsic antibacterial nanosystems. The antibiotic-containing polymeric nanosystems include antibiotic-encapsulated nanocarriers (e.g., polymeric micelles, vesicles, nanogels) and antibiotic-conjugated polymer nanosystems for the delivery of antibiotic drugs. On the other hand, the intrinsic antibacterial polymer nanosystems containing bactericidal moieties such as quaternary ammonium groups, phosphonium groups, polycations, antimicrobial peptides (AMPs), and their synthetic mimics, are also described. The biodegradability of the nanosystems can be rendered by the incorporation of labile chemical linkages, such as carbonate, ester, amide, and phosphoester bonds. The design and synthesis of the degradable polymeric building blocks and their fabrications into nanosystems are also explicated, together with their plausible action mechanisms and potential biomedical applications. The perspectives of the current research in this field are also described.

High performance benzoimidazolyl-based aminophenolate zinc complexes for isoselective polymerization of rac-lactide

Zinc complexes supported by achiral benzoimidazolyl-based aminophenolate ligands exhibit high catalytic activities and excellent isoselectivities toward the ring-opening polymerization of rac-lactide under mild conditions.

Polymer Nanosheet Containing Star-Like Copolymers: A Novel Scalable Controlled Release System

Poly(ε-caprolactone) (PCL)-based nanomaterials, such as nanoparticles and liposomes, have exhibited great potential as controlled release systems, but the difficulties in large-scale fabrication limit their practical applications. Among the various methods being developed to fabricate polymer nanosheets (PNSs) for different applications, such as Langmuir-Blodgett technique and layer-by-layer assembly, are very effort consuming, and only a few PNSs can be obtained. In this paper, poly(ε-caprolactone)-based PNSs with adjustable thickness are obtained in large quantity by simple water exposure of multilayer polymer films, which are fabricated via a layer multiplying coextrusion method. The PNS is also demonstrated as a novel controlled guest release system, in which release kinetics are adjustable by the nanosheet thickness, pH values of the media, and the presence of protecting layers. Theoretical simulations, including Korsmeyer-Peppas model and Finite-element analysis, are also employed to discern the observed guest-release mechanisms.

Rare-earth metal-mediated PhCN insertion into N,N-bis(trimethylsilyl)naphthalene-1,8-diamido dianion – a synthetic approach to complexes coordinated by ansa-bridged amido-amidinato ligand

We report the first example of rare earth metal-mediated insertion of PhCN into Si–N bonds with the formation of an amidinato moiety.

Dual tumor-targeted poly(lactic-co-glycolic acid)-polyethylene glycol-folic acid nanoparticles: a novel biodegradable nanocarrier for secure and efficient antitumor drug delivery

Further specific target-ability development of biodegradable nanocarriers is extremely important to promote their security and efficiency in antitumor drug-delivery applications. In this study, a facilely prepared poly(lactic-co-glycolic acid) (PLGA)-polyethylene glycol (PEG)-folic acid (FA) copolymer was able to self-assemble into nanoparticles with favorable hydrodynamic diameters of around 100 nm and negative surface charge in aqueous solution, which was expected to enhance intracellular antitumor drug delivery by advanced dual tumor-target effects, ie, enhanced permeability and retention induced the passive target, and FA mediated the positive target. Fluorescence-activated cell-sorting and confocal laser-scanning microscopy results confirmed that doxorubicin (model drug) loaded into PLGA-PEG-FA nanoparticles was able to be delivered efficiently into tumor cells and accumulated at nuclei. In addition, all hemolysis, 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, and zebrafish-development experiments demonstrated that PLGA-PEG-FA nanoparticles were biocompatible and secure for biomedical applications, even at high polymer concentration (0.1 mg/mL), both in vitro and in vivo. Therefore, PLGA-PEG-FA nanoparticles provide a feasible controlled-release platform for secure and efficient antitumor drug delivery.

Composition and Stability of Plasma Polymer Films Exhibiting Vertical Chemical Gradients

Controlling the balance between stability and functional group density in grown plasma polymer films is the key to diverse applications such as drug release, tissue-engineered implants, filtration, contact lenses, microfluidics, electrodes, sensors, etc. Highly functional plasma polymer films typically show a limited stability in air or aqueous environments due to mechanisms like molecular reorganization, oxidation, and hydrolysis. Stabilization is achieved by enhancing cross-linking at the cost of the terminal functional groups such as -OH and -COOH, but also -NH₂, etc. To overcome such limitations, a structural and chemical gradient was introduced perpendicular to the surface plane; this vertical gradient structure is composed of a highly cross-linked base layer, gradually changing into a more functional nanoscaled surface termination layer. This was achieved using CO₂/C₂H₄ discharges with decreasing power input and increasing gas ratio during plasma polymer deposition. The aging behavior and stability of such oxygen-functional vertical gradient nanostructures were studied in air and in different aqueous environments (acidic pH 4, neutral pH ≈ 6.2, and basic pH 10). Complementary characterization methods were used, including angle-resolved X-ray photoelectron spectroscopy (ARXPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) as well as water contact angle (WCA) measurements. It was found that in air, the vertical gradient films are stabilized over a period of months. The same gradients also appear to be stable in neutral water over a period of at least 1 week. Changes in the oxygen depth profiles have been observed at pH 4 and pH 10 showing structural and chemical aging effects on different time scales. The use of vertical gradient plasma polymer nanofilms thus represents a novel approach providing enhanced stability, thus opening the possibility for new applications.

Synthesis and characterization of dinuclear rare-earth complexes supported by amine-bridged bis(phenolate) ligands and their catalytic activity for the ring-opening polymerization of l-lactide

Reactions of amine-bridged bis(phenolate) protio-ligands N,N-bis(3,5-di-tert-butyl-2-hydroxybenzyl)aminoacetic acid (L(1)-H3) and N,N-bis[3,5-bis(α,α'-dimethylbenzyl)-2-hydroxybenzyl]aminoacetic acid (L(2)-H3), with 1 equiv. M[N(SiMe3)2]3 (M = La, Nd, Sm, Gd, Y) in THF at room temperature yielded the neutral rare-earth complexes [M2(L)2(THF)4] (L = L(1), M = La (), Nd (), Sm (), Gd (), Y (); L = L(2), M = La (), Nd (), Sm (), Gd (), Y ()). All of these complexes were characterized by single-crystal X-ray diffraction, elemental analysis and in the case of yttrium and lanthanum complexes, (1)H NMR spectroscopy. The molecular structure of revealed dinuclear species in which the eight-coordinate lanthanum centers were bonded to two oxygen atoms of two THF molecules, to three oxygen atoms and one nitrogen atom of one L(1) ligand, and two oxygen atoms of the carboxyl group of another. Complexes were also dinuclear species containing seven-coordinate metal centers similar to , albeit with bonding to one rather than two carboxyl group oxygens of another ligand. Further treatment of with excess benzyl alcohol provided dinuclear complex [La2(L(1))2(BnOH)6] (), in which each lanthanum ion is eight-coordinate, bonded to three oxygen atoms and one nitrogen atom of one ligand, three oxygen atoms of three BnOH molecules, as well as one oxygen atom of bridging carboxyl group of the other ligand. In the presence of BnOH, complexes efficiently catalyzed the ring-opening polymerization of l-lactide in a controlled manner and gave polymers with relatively narrow molecular weight distributions. The kinetic and mechanistic studies associated with the ROP of l-lactide using /BnOH initiating system have been performed.

Synthesis and Structural Characterization of Bioactive PHA and γ-PGA Oligomers for Potential Applications as a Delivery System

The (trans)esterification reaction of bacterial biopolymers with a selected bioactive compound with a hydroxyl group was applied as a convenient method for obtaining conjugates of such compound. Tyrosol, a naturally occurring phenolic compound, was selected as a model of a bioactive compound with a hydroxyl group. Selected biodegradable polyester and polyamide, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) and poly-γ-glutamic acid (γ-PGA), respectively, were used. The (trans)esterification reactions were carried out in melt mediated by 4-toluenesulfonic acid monohydrate. The structures of (trans)esterification products were established at the molecular level with the aid of ESI-MS² (electrospray ionization tandem mass spectrometry) and/or ¹H NMR (nuclear magnetic resonance) techniques. Performed analyses confirmed that the developed method leads to the formation of conjugates in which bioactive compounds are covalently bonded to biopolymer chains. The amount of covalently bonded bioactive compounds in the resulting conjugates depends on the type of biopolymers applied in synthesis.

Group 4 alkoxide complexes containing [NNO]-type scaffold: synthesis, structural characterization and polymerization studies

A series of new dinuclear group 4 complexes containing [NNO]-type ligands are utilized as catalysts for polymerization reactions.

New heteroscorpionate lanthanide complexes for ring-opening polymerisation of ɛ-caprolactone and rac-lactide‡

Yttrium and lanthanum amido-complexes with bis(pyrazol-1-yl)acetates in their coordination spheres were studied as the catalysts in

Steric and chelating ring concerns on the l-lactide polymerization by asymmetric β-diketiminato zinc complexes

Asymmetric β-diketiminato zinc complexes were investigated in l-lactide polymerization. The catalytic rate depended heavily on the N-aryl substituents.