A Berzelius reagent, phosphorus decasulfide (P4S10), in organic syntheses

Visible-Light-Induced Phosphorothioation of Alkenyl Sulfonium Salts with S8 and H-Phosphonates

An efficient and practical method for synthesizing vinyl phosphorothioates has been demonstrated through a visible-light-induced three-component reaction of alkenyl sulfonium salts, S8, and H-phosphonates. This method facilitates the synthesis of a diverse range of vinyl phosphorothioates with a wide substrate scope and functional group tolerance. Preliminary mechanistic studies suggest that the reaction involves a phosphorothioate radical-triggered process.

Alkoxylation and Phosphorylation of Pyrimidine Disulfides: Green Synthesis of Alkoxypyrimidine Thioethers and Pyrimidine Phosphorothioates

This paper addresses a novel, green, and sustainable method to construct new C-S and P-S bonds by cleaving the S-S bond in pyrimidine disulfide under various conditions. The first alkoxylation and phosphorylation of pyrimidine disulfide are effectively accomplished by this approach. Compared to the methods reported, this approach provides more benefits, including the utilization of eco-friendly solvents, straightforward procedure, mild reaction conditions, high atomic efficiency, and a broad range of applicable substrates. As a result, we were able to synthesize a variety of pyrimidine phosphorothioate lipids with potential applications. Furthermore, a series of control experiments as well as theoretical calculations are performed in this work to produce deeper insights of the transfer mechanism.

Near-Infrared Room-Temperature Phosphorescence from Monocyclic Luminophores

Compact luminophores with long emission wavelengths have aroused considerable theoretical and practical interest. Organics with room-temperature phosphorescence (RTP) are also desirable for their longer lifetimes and larger Stokes shifts than fluorescence. Utilizing the low electronic transition energy intrinsic to thiocarbonyl compounds, electron-withdrawing groups were attached to the 4H-pyran-4-thione core to further lower the excited state energies. The resulting mini-phosphors were doped into suitable polymer matrices. These purely organic, amorphous materials emitted near-infrared (NIR) RTP. Having a molar mass of only 162 g mol-1, one of the phosphors emitted RTP that peaked at 750 nm, with a very large Stokes shift of 15485 cm-1 (403 nm). Thanks to the good processability of the polymer film, light-emitting diodes (LEDs) with NIR emission were easily fabricated by coating doped polymer on ultraviolet LEDs. This work provides an intriguing strategy to achieve NIR RTP using compact luminophores.

New Frontiers in phosphorothioate formation: harnessing inorganic phosphorus sources

Organic phosphorothioates are a class of organic compounds containing the C-S-P structural motif, known for their unique physical and chemical properties. These compounds hold significant value in various fields, including agriculture, pharmaceuticals, and materials science, particularly playing a crucial role in agrochemicals and nucleotide modification. Traditionally, phosphorothioates have been synthesized primarily through the formation of P-S bonds or direct phosphorothioation reactions from organic phosphorus sources such as P(O)H and P(O)SH. In recent years, new strategies utilizing inorganic phosphorus sources, such as P4S10 and white phosphorus (P4), have emerged as a dynamic area of research. This review highlights the latest advancements in the synthesis of phosphorothioates and phosphoropolythioates from inorganic phosphorus sources, focusing on their applicability, mechanisms, current limitations, and potential future directions.

Visible Light/Copper Catalysis-Enabled Arylation and Alkenylation of Phosphorothioates via Site-Selective C-H Thianthrenation

An efficient visible light/copper-enabled arylation and alkenylation of phosphorothioates with thianthrenium salts via a C(sp2)-S cross-coupling reaction have been demonstrated. This strategy uses aryl/alkenyl thianthrenium salts as new electrophilic reagents, which can be easily prepared by the site-selective C-H thianthrenation of arenes/alkenes with high regioselectivity. Mechanistic studies revealed a crucial role of the in situ formed copper-sulfur complex, which undergoes a facile SET process with the thianthrenium salts under visible light conditions, thereby successfully achieving the desired cross-coupling reactivity.

Synthesis of Thionated Perylenediimides: State of the Art and First Investigations of an Alternative to Lawesson's Reagent

Perylenediimides (PDIs) are composed of a central perylene ring, on which are grafted two imide groups at the peri positions. Thionated PDIs are characterized by the substitution of one or more oxygen atoms of these imide functions with sulfur atoms. This structural modification alters the electronic properties with a redshift of the optical absorption accompanied by modification of the charge transport characteristics compared to their non-thionated counterparts. These properties make them suitable candidates for applications in optoelectronic devices, such as organic light-emitting diodes and organic photovoltaics. Moreover, the presence of sulfur atom(s) can favor the promotion of reactive oxygen species production for photodynamic and photothermal therapies. These thionated PDIs can be synthesized through the post-functionalization of PDIs by using a sulfurizing reagent. Nevertheless, the main drawbacks remain the difficulties in adjusting the degree of thionation and obtaining tri- and tetrathionated PDIs. Up to now, this thionation reaction has been described almost exclusively using Lawesson's reagent. In the current study, we present our first investigations into an alternative reagent to enhance selectivity and achieve a greater degree of thionation. The association of phosphorus pentasulfide with hexamethyldisiloxane (Curphey's reagent) clearly demonstrated higher reactivity compared with Lawesson's reagent to attain multi-thionated PDIs.

Construction of β-Oximino Phosphorodithioates via (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl-Promoted Difunctionalization of Alkenes with tert-Butyl Nitrite, P4S10, and Alcohols

A (2,2,6,6-tetramethylpiperidin-1-yl)oxyl-mediated difunctionalization of alkenes with tert-butyl nitrite, P4S10, and alcohols has been developed for the synthesis of β-oximino phosphorodithioates. The reaction goes through a radical pathway with the successive installation of phosphorodithioate and an oxime group. This four-component protocol offers a practical approach to constructing a variety of β-oximino phosphorodithioates in moderate to good yields with favorable functional group tolerance.

TsCl promoted deoxygenative phosphorothiolation of quinoline N-oxides towards S-quinolyl phosphorothioates

A convenient, efficient and practical approach for the synthesis of S-quinolyl phosphorothioates via cheap TsCl promoted deoxygenative C2-H phosphorothiolation of quinoline N-oxides with readily available triethylammonium O,O-dialkylphosphorothioates was developed. The reaction performed well under transition-metal-free conditions at room temperature with a very short reaction time (10-20 min). Preliminary studies showed that the current transformation underwent a nucleophilic substitution process.

Direct Transamidation of Thioamides with Amines via Acetophenone-Promoted Enamine Catalysis under Metal-Free Conditions

Herein, we developed a highly selective, efficient, and simple method for direct transamidation of thioamides with amines, promoted by commercially available acetophenone under metal-/solvent-free conditions. The reaction tolerated a wide range of functional groups and substrates, including single- or double-thioamides, benzylamines, or alkyl/cycloalkyl-substituted aliphatic amines. The present protocol can be applied to gram-scale in good yields. In addition, the Pt-/Ni-complexes of double-transamidation products were obtained in good to excellent yields. The investigation of photophysical properties indicated that the fluorescence spectra of Pt-complexes showed an emission band centered at 550-750 nm and exhibited red fluorescence when irradiated by a UV lamp (365 nm).

Dithiophosphoric Acids for Polymer Functionalization

Dithiophosphoric acids (DTPAs) are an intriguing class of compounds that are sourced from elemental sulfur and white phosphorus and are prepared from the reaction of phosphorus pentasulfide with alcohols. The electrophilic addition of DTPAs to alkenes and unsaturated olefinic substrates is a known reaction, but has not been applied to polymer synthesis and polymer functionalization. We report on the synthesis and application of DTPAs for the functionalization of challenging poly-enes, namely polyisoprene (PI) and polynorbornene (pNB) prepared by ring-opening metathesis polymerization (ROMP). The high heteroatom content within DTPA moieties impart intriguing bulk properties to poly-ene materials after direct electrophilic addition reactions to the polymer backbone introducing DTPAs as side chain groups. The resulting materials possess both enhanced optical and flame retardant properties vs the poly-ene starting materials. Finally, we demonstrate the ability to prepare crosslinked polydiene films with di-functional DTPAs, where the crosslinking density and thermomechanical properties can be directly tuned by DTPA feed ratios.

Potassium xanthate-promoted reductive sulfuration reaction: from aldehydes to thiol, disulfide, and thioester derivatives

Herein, we developed a synthetic strategy for the direct construction of C-S bonds to obtain biologically active sulfur-containing compounds and a methodology involving the reductive sulfuration of aldehydes or ketones to obtain diverse substituted thiol, disulfide, and thioester derivatives. EtOCS2K is demonstrated as a potential substitute for the Berzelius reagent or Lawesson's reagent for the construction of C-S bonds.

A Ternary (P, Se, S) Covalent Inorganic Framework as a Shuttle Effect-Free Cathode for Li-S Batteries

Developing new cathode materials to avoid shuttle effect of Li-S batteries at source is crucial for practical high-energy applications, which, however, remains a great challenge. Herein, a new class of sulfur-containing ternary covalent inorganic framework (CIF), P4 Se6 S40 , is explored, by simply comelting powders of P, S, and Se. The P4 Se6 S40 CIF with open framework enables all active sites available during electrochemical reactions, giving a high capacity delivery. Moreover, introducing Se atoms can improve intrinsic electronic conductivity of S chains yet without remarkably compromising the capacity because Se is also electrochemical active to lithium storage. More importantly, Se atoms in S-Se chains can serve as a heteroatom barrier to block the bonding of S atoms around, effectively avoiding the formation of long-chain polysulfides during cycling. Besides, stable Li3 PS4 with a tetrahedral configuration formed after lithiation works as not only a good ionic conductor to promote Li ion diffusion, but a three-dimensional spatial barrier and chemical anchor to suppress the dissolution and diffusion of lithium polysulfides (LiPS), further inhibiting the shuttle effect. Consequently, the P4 Se6 S40 cathode delivers high capacity and excellent capacity retention with even a high loading of 10.5 mg cm-2 which far surpasses the requirement for commercial applications.

Copper-Catalyzed Fluoroalkylphosphorothiolation of Alkynes for the Synthesis of (E)-β-Fluoroalkyl Vinyl Phosphorothioates

A convenient copper-catalyzed three-component radical-based fluoroalkylphosphorothiolation of terminal alkynes with (iPrO)2P(O)SH and fluoroalkylation reagent for the synthesis of a variety of (E)-β-fluoroalkyl vinyl phosphorothioates with excellent regioselectivity and stereoselectivity has been developed. All the starting materials used in this reaction are highly stable and readily available. Thus, this process features with mild reaction conditions, simple operation and good functional group tolerance (>40 examples). Furthermore, this modular reaction system allows the late-stage functionalization of bioactive molecules.

Towards Symmetric Thioamides: Microwave-Aided Synthesis of Terephthalic Acid Derivatives

The multistep synthesis of novel bis-terephthalthioamides based on methyl esters of amino acids (AAs) was proposed using conventional heating and microwave-assisted approaches. In fact, the comparative case study on the thionation of new symmetrical diamides with Lawesson's reagent (LR) was performed. The microwave-accelerated small-scale methodology was successfully employed on the whole pathway from substrates (Gly, Ala, Val, Tyr, Ser) to products (symmetrical dithioamides of terephthalic acid), resulting in significantly reduced reaction time, energy requirements, and slightly increased reaction yields when compared to conventional heating. Moreover, the intermolecular similarity of novel terephthalic acid derivatives was estimated in the multidimensional space (mDS) of the structure/property-related in silico descriptors using principal component analysis (PCA) and hierarchical clustering analysis (HCA). The distance-oriented structure/property distribution was also correlated with the experimental lipophilic data.

Sustainable Polythioesters via Thio(no)lactones: Monomer Synthesis, Ring-Opening Polymerization, End-of-Life Considerations, and Industrial Perspectives

As the environmental effects of plastics are of ever greater concern, the industry is driven towards more sustainable polymers. Besides sustainability, our fast-developing society imposes the need for highly versatile materials. Whereas aliphatic polyesters (PEs) are widely adopted and studied as next-generation biobased and (bio)degradable materials, their sulfur-containing analogs, polythioesters (PTEs), only recently gained attention. Nevertheless, the introduction of S atoms is known to often enhance thermal, mechanical, electrochemical, and optical properties, offering prospects for broad applicability. Furthermore, thanks to their thioester-based backbone, PTEs are inherently susceptible to degradation, giving them a high sustainability potential. The key route to PTEs is through ring-opening polymerization (ROP) of thio(no)lactones. This Review critically discusses the (potential) sustainability of the most relevant state-of-the-art in every step from sulfur source to end-of-life treatment options of PTEs, obtained through ROP of thio(no)lactones. The benefits and drawbacks of PTEs versus PEs are highlighted, including their industrial perspective.

Towards More Practical Methods for the Chemical Synthesis of Thioamides Using Sulfuration Agents: A Decade Update

Compounds possessing a thioamide function play a crucial role in organic synthesis, serving as key building blocks. They are also important in the pharmaceutical chemistry and drug design, owing to their ability to mimic the amide function in biomolecules while retaining or developing biological activity. From the synthetic viewpoint, several methods have been developed for preparing thioamides using sulfuration agents. The purpose of this review is to give an update of the last decade of contributions focusing on the formation of thioamides employing different sulfur sources. When appropriate, the cleanness and practicality of the new methods are highlighted.

Radical-Cascade Avenue to Access 1,2-Dithioles Employing Dithioesters and Edman's Reagent

An operationally simple and efficient domino etiquette has been developed for the facile construction of 1,2-dithioles employing easily accessible dithioesters as a three-atom CCS synthon and aryl isothiocyanates as a two-atom CS unit in the absence of any catalyst and additive at room temperature under open air. The reaction proceeded efficiently affording the desired 1,2-dithioles in good yields having various functional groups of a diverse electronic and steric nature. This approach avoids possible toxicity and tiresome workup conditions and features easy to handle, cheap, and readily accessible reagents, O₂ as a green oxidant, and gram-scale ability. Notably, the final S-S bond formation and cascade ring construction follow a radical pathway, which has been recognized via a radical trapping experiment with BHT during the course of the reaction. Notably, the exocyclic C═N bond at position 3 of 1,2-dithiole possesses Z stereochemistry.

Poly(dithiophosphate)s, a New Class of Phosphorus- and Sulfur-Containing Functional Polymers by a Catalyst-Free Facile Reaction between Diols and Phosphorus Pentasulfide

Novel poly(dithiophosphate)s (PDTPs) were successfully synthesized under mild conditions without any additive in the presence of THF or toluene diluents at 60 °C by a direct, catalyst-free reaction between the abundant phosphorus pentasulfide (P₄S₁₀) and glycols such as ethylene glycol (EG), 1,6-hexanediol (HD) and poly(ethylene glycol) (PEG). GPC, FTIR, ¹H and ³¹P NMR analyses proved the formation of macromolecules with dithiophosphate coupling groups having P=S and P-SH pendant functionalities. Surprisingly, the ring-opening of THF by the P-SH group and its pendant incorporation as a branching point occur during polymerization. This process is absent with toluene, providing conditions to obtain linear chains. ³¹P NMR measurements indicate long-time partial hydrolysis and esterification, resulting in the formation of a thiophosphoric acid moiety and branching points. Copolymerization, i.e., using mixtures of EG or HD with PEG, results in polymers with broadly varying viscoelastic properties. TGA shows the lower thermal stability of PDTPs than that of PEG due to the relatively low thermal stability of the P-O-C moieties. The low T_gs of these polymers, from -4 to -50 °C, and a lack of PEG crystallites were found by DSC. This polymerization process and the resulting novel PDTPs enable various new routes for polymer synthesis and application possibilities.

Metal-Free Regioselective Hydrophosphorodithioation of Spirovinylcyclopropyl Oxindoles: Rapid Access to Allyl Dialkylphosphorodithioates

Phosphorodithioates are important substructures due to their great use in bioactive compounds and functional materials. A metal-free 1,5-addition of spirovinylcyclopropyl oxindoles have been developed by choosing P₄S₁₀ and alcohol as nucleophiles through the regioselective ring-opening of spirovinylcyclopropyl oxindoles. This method provides access to allylic organothiophosphates with high efficiency, wide functional group tolerance, good chemo- and regioselectivity, and E-selectivity. 1,3-Addition products were also prepared in high yield. Furthermore, the resulting organothiophosphates could be readily transformed into other allylic derivatives.

Preparation of thioamides from alkyl bromides, nitriles, and hydrogen sulfide through a thio-Ritter-type reaction

A novel thio-Ritter-type reaction of alkyl bromides, nitriles, and hydrogen sulfide has been explored, providing a straightforward approach toward functionally important thioamides. This transformation features a broad substrate scope, operational simplicity, use of available feedstock chemicals, and late-stage functionalizations of bioactive molecules. The reaction mechanism is also proposed.

Synthesis, Structural Determination, and Antioxidant Activities of Acyclic and Substituted Heterocyclic Phosphonates Linearly Linked 4-hydroxy-2(1H)-quinolinone

The chemical reactivity of 3-[(E)-3-(dimethylamino)-2-propenoyl]-4-hydroxy-1-methy-2(1H)-quinolinone (1) towards some phosphorus reagents was studied. The enaminone 1 was cyclized into pyranoquinolinylphosphonate 2 via treatment with diethyl phosphite in basic medium. However, its reaction with triethoxy phosphonoacetate gave the substituted oxopyranylphosphonate 3. Using the same reaction conditions, both thioxopyridinylphosphonate 4 and oxopyranylphosphonate 5 were produced via a reaction of enaminone 1 with both diethyl 2-amino-2-thioxoethylphosphonate and diethyl vinylphosphonate, respectively, in low yields. In addition, the two novel oxopyridinylphosphonates 6 and 7 were obtained by treatment of enaminone 1 with a diethyl cyanomethylphosphonate reagent. Two oaxathiaphosphininyl derivatives, 8 and 9, were obtained by treatment of the enaminone 1 with O, O-diethyl dithiophosphoric acid under different reaction conditions. Diazaphosphininyl 11 and oxazaphosphininyl 12 derivatives were obtained in excellent yields using a P-phenylphosphonic diamide reagent under different reaction conditions. The treatment of the enaminone 1 with phosphorus pentasulfide produced the non-phosphorylated product thioxothiopyranoquinolinone 13. Finally, the enaminone was turned into oxathiaphosphininyl 14 using Lawesson’s reagent. The possible reaction mechanisms of the formation of these products were discussed. The structures of newly isolated products were established by elemental analysis and spectral tools. The compounds were evaluated for their antioxidant activities.

One-Pot Synthesis of Thio-Augmented Sulfonylureas via a Modified Bunte's Reaction

We report the development of a one-pot Bunte's reaction-enabled expeditious platform under aqueous conditions for the scalable conversion of sulfonylureas to synthetically versatile thio-sulfonylureas. The reaction was further propagated in the same pot to yield diverse chiral and achiral isothiosulfonyl analogs. The protocol enabled the synthesis of various drug-like molecules and was applied to an enantiomeric synthesis of a cannabinoid receptor antagonist SLV326.

Blue LED-Promoted Syntheses of Phosphorothioates and Phosphorodithioates

An environmentally friendly and resourceful modular protocol for the synthesis of phosphorochalcogenoates, phosphorochalcogenothioates, and phosphinothioates under blue light-emitting diode irradiation is described. The blue LED-promoted P-S, P-Se, and P-Te bond constructions occurred under metal-free, ligand-free, oxidant-free, and photocatalyst-free conditions with minimum chemical waste generation and high atom economy providing the resulting phosphorochalcogenoates, phosphorochalcogenothioates, and phosphinothioates in good to excellent yields.

Photochemical Synthesis and Electrochemical and Photophysical Properties of 2,7-Diarylbenzo[1,2-d:4,3-d']bis(thiazoles)

This article focuses on the development of practical approaches to the preparation of benzo[1,2-d:4,3-d']bis(thiazoles) using blue light-induced photochemical cyclization of N,N'-(1,4-aryl)dithioamides in the presence of p-chloranil as a mild oxidant. The proposed method allows to obtain benzo[1,2-d:4,3-d']bis(thiazoles) containing donor substituents in the conjugated chain. Photophysical and (spectro)electrochemical properties of 2,6-di([2,2'-bithiophen]-5-yl)benzo[1,2-d:4,3-d']bis(thiazole) and -benzo[1,2-d:4,5-d']bis(thiazole) are studied in detail. The properties of the synthesized compounds suggest their potential applications for organic electronics.

Ynamide-Mediated Thioamide and Primary Thioamide Syntheses

Environmentally friendly ynamide-mediated thioamidation of monothiocarboxylic acids with amines or ammonium hydroxide for the syntheses of thioamides and primary thioamides is described. Simple and mild reaction conditions enable the reaction to tolerate a wide variety of functional groups such as hydroxyl group, ester, tertiary amine, ketone, and amide moieties. Readily available NaSH served as the sulfur source, avoiding the use of toxic, expensive, and malodorous organic sulfur reagents and making this strategy environmentally friendly and practical. Importantly, the stereochemical integrity of α-chiral monothiocarboxylic acids was maintained during the activation step and subsequent aminolysis process, thus offering a racemization-free strategy for peptide C-terminal modification. Furthermore, a number of thioamide-modified drugs were prepared in good yields by using this protocol and the synthesized primary thioamides were transformed into backbone thiazolyl modified peptides.

Universal Solution Synthesis of Sulfide Solid Electrolytes Using Alkahest for All-Solid-State Batteries

The wet-chemical processability of sulfide solid electrolytes (SEs) provides intriguing opportunities for all-solid-state batteries. Thus far, sulfide SEs are wet-prepared either from solid precursors suspended in solvents (suspension synthesis) or from homogeneous solutions using SEs (solution process) with restricted composition spaces. Here, a universal solution synthesis method for preparing sulfide SEs from precursors, not only Li₂ S, P₂ S₅ , LiCl, and Na₂ S, but also metal sulfides (e.g., GeS₂ and SnS₂ ), fully dissolved in an alkahest: a mixture solvent of 1,2-ethylenediamine (EDA) and 1,2-ethanedithiol (EDT) (or ethanethiol). Raman spectroscopy and theoretical calculations reveal that the exceptional dissolving power of EDA-EDT toward GeS₂ is due to the nucleophilicity of the thiolate anions that is strong enough to dissociate the GeS bonds. Solution-synthesized Li₁₀ GeP₂ S₁₂ , Li₆ PS₅ Cl, and Na₁₁ Sn₂ PS₁₂ exhibit high ionic conductivities (0.74, 1.3, and 0.10 mS cm^-1 at 30 °C, respectively), and their application for all-solid-state batteries is successfully demonstrated.

Ni-Catalyzed Synthesis of Thiocarboxylic Acid Derivatives

A Ni-catalyzed cross-coupling of readily accessible O-alkyl xanthate esters or thiocarbonyl imidazolides and organozinc reagents for the synthesis of thiocarboxylic acid derivatives has been developed. This method benefits from a fast reaction time, mild reaction conditions, and ease of starting material synthesis. The use of transition-metal catalysis to access a diverse range of thiocarbonyl-containing compounds provides a useful complementary approach when compared with previously established methodologies.

Thioamide synthesis via copper-catalyzed C–H activation of 1,2,3-thiadiazoles enabled by slow release and capture of thioketenes

A copper-catalyzed coupling of 1,2,3-thiadiazoles with various amines under base-free conditions was developed as a robust protocol for the synthesis of thioamide derivatives via C–H activation/Cu coordination strategy.

Microbial Transformation of Chlordecone and Two Transformation Products Formed During in situ Chemical Reduction

Chlordecone (CLD) is a very persistent synthetic organochlorine pesticide found in the French West Indies. Recently published work has demonstrated the potential of zero-valent iron to dechlorinate CLD by in situ chemical reduction (ISCR) in soils under water-saturated conditions, forming mono- to penta-dechlorinated CLD transformation products. These transformation products are more mobile than CLD and less toxic; however, nothing is known about their further degradation, although increasing evidence of CLD biodegradation by bacteria is being found. The present study began with the enrichment from wastewater sludge of a CLD-transforming community which was then inoculated into fresh media in the presence of either CLD or two of the main ISCR transformation products, 10-monohydroCLD (-1Cl-CLD) and tri-hydroCLD (-3Cl-CLD). Carried out in triplicate batches and incubated at 38°C under anoxic conditions and in the dark, the cultures were sampled regularly during 3 months and analyzed for CLD, -1Cl-CLD, -3Cl-CLD, and possible transformation products by gas chromatography coupled to mass spectrometry. All batches showed a decrease in the amended substrates (CLD or hydroCLD). CLD degradation occurred with concomitant formation of a nine-carbon compound (pentachloroindene) and two sulfur-containing transformation products (chlordecthiol, CLD-SH; methyl chlordecsulfide, CLD-SCH₃), demonstrating competing transformation pathways. In contrast, -1Cl-CLD and -3Cl-CLD only underwent a sequential reductive sulfidation/S-methylation process resulting in -1Cl-CLD-SH and -1Cl-CLD-SCH₃ on the one hand, and -3Cl-CLD-SH, -3Cl-CLD-SCH₃ on the other hand. Some sulfur-containing transformation products have been reported previously with single bacterial strains, but never in the presence of a complex microbial community. At the end of the experiment, bacterial and archaeal populations were investigated by 16S rRNA gene amplicon sequencing. The observed diversity was mostly similar in the CLD and -1Cl-CLD conditions to the inoculum with a dominant archaea genus, Methanobacterium, and four OTU affiliated to bacteria, identified at the family (Spirochaetaceae) or genus level (Desulfovibrio, Aminobacterium, and Soehngenia). On the other hand, in the -3Cl-CLD condition, although the same OTU were found, Clostridium sensu stricto 7, Candidatus Cloacimonas, and Proteiniphilum were also present at > 2% sequences. Presence of methanogens and sulfate-reducing bacteria could contribute to sulfidation and S-methylation biotransformations. Overall, these results contribute to increasing our knowledge on the biodegradability of CLD and its transformation products, helping to progress toward effective remediation solutions.

Photoinduced Decarboxylative Phosphorothiolation of N-Hydroxyphthalimide Esters

A visible-light-induced protocol for the synthesis of phosphorothioates is developed by employing the Ir-catalyzed decarboxylative phosphorothiolation of N-hydroxyphthalimide esters. This novel synthesis method utilizes carboxylic acids as raw material, which is stable, cheap, and commercially available. Scope studies show that this reaction has good compatibility of functional groups. Notably, both the synthesis of steric hindrance phosphorothioates and the later modification of some bioactive compounds are successfully achieved.

Modified Li7P3S11 Glass-Ceramic Electrolyte and Its Characterization

Li₇P₃S₁₁ glass ceramics have high conductivities competitive with liquid electrolytes, making them good candidates as solid-state electrolytes for all-solid-state lithium-ion batteries. However, the metastable nature and performance of Li₇P₃S₁₁ glass ceramics remain mysterious. Herein, modified Li₇P₃S₁₁ glass ceramics with compositions of 70Li₂S-30P₂S₅ were prepared via two-step mechanical milling and thermal annealing. Li₇P₃S₁₁ glass ceramics synthesized using the conventional method (mechanical milling and thermal annealing) were again ball-milled to obtain amorphous 70Li₂S-30P₂S₅ with a peculiar glass structure. Further thermal annealing was carried out to crystallize the glass. The obtained crystalline phase was analogous to the original Li₇P₃S₁₁ phase, but the conductivity was enhanced by a factor of 1.7. Based on ³¹P solid-state nuclear magnetic resonance (NMR) spectroscopy, the Li₇P₃S₁₁ phase contained an additional PS₄^3- unit. A rational deconvolution procedure for the ³¹P solid-state NMR spectra based on crystalline Li₇P₃S₁₁ was developed and applied to the samples. The analysis can resolve the additional crystalline PS₄^3- unit in the Li₇P₃S₁₁ structure. Based on two-dimensional double-quantum ³¹P NMR spectroscopy, the additional PS₄^3- unit is located adjacent to the P₂S₇^4- unit, suggesting that P₂S₇^4- is divided into two PS₄^3- units in the Li₇P₃S₁₁ phase. The flip motion of Li⁺ was also investigated based on the ⁷Li spin-lattice relaxation time. The independent activation energy of spin-lattice relaxation with respect to temperature in the Li₇P₃S₁₁ phase was attributed to a conduction path between the two PS₄^3- units. The findings provide a synthetic route that can be used to develop metastable solid-state electrolytes.

Synthesis of the Kinase Inhibitors Nintedanib, Hesperadin, and Their Analogues Using the Eschenmoser Coupling Reaction

A novel synthetic approach involving an Eschenmoser coupling reaction of substituted 3-bromooxindoles (H, 6-Cl, 6-COOMe, 5-NO₂) with two substituted thiobenzanilides in dimethylformamide or acetonitrile was used for the synthesis of eight kinase inhibitors including Nintedanib and Hesperadin in yields exceeding 76%. Starting compounds for the synthesis are also easily available in good yields. 3-Bromooxindoles were prepared either from corresponding isatins using a three-step synthesis in an average overall yield of 65% or by direct bromination of oxindoles (yield of 65-86%). Starting N-(4-piperidin-1-ylmethyl-phenyl)-thiobenzamide was prepared by thionation of the corresponding benzanilide in an 86% yield and N-methyl-N-(4-thiobenzoylaminophenyl)-2-(4-methylpiperazin-1-yl)acetamide was prepared by thioacylation of the corresponding aniline with methyl dithiobenzoate in an 86% yield.

Lewis base-free thiophosphonium ion: a cationic sulfur atom transfer reagent

Phosphorus(v) sulfide and Lawesson's reagent are commonly used thionating reagents which are considered to operate after dissociation into highly reactive dithiophosphorane fragments. We report the synthesis and properties of a monomeric thiophosphonium ion [R2P[double bond, length as m-dash]S]+. The highly electrophilic species reacts with carbonyls in oxo-for-sulfido exchange reactions at room temperature and undergoes phosphorus-chalcogen bond metathesis reactions with phosphine chalcogenides.

Novel Ring Systems: Spiro[Cycloalkane] Derivatives of Triazolo- and Tetrazolo-Pyridazines

In orderto synthesize new pyridazine derivatives anellated with different nitrogen heterocyclic moieties, spiro[cycloalkane]pyridazinones were transformed into the corresponding thioxo derivatives via a reaction with phosphorus pentasulfide. The reaction of the formed 2,3-diazaspiro[5.5]undec-3-ene-1-thiones with hydrazine provided the corresponding 1-hydrazono-2,3-diazaspiro[5.5]undec-3-ene, whose diazotization led to the desired spiro[cyclohexane-1,8′-tetrazolo[1,5-b]pyridazines. The reaction of dihydropyridazinethiones with benzhydrazide afforded the corresponding 7H-spiro[[1,2,4]triazolo[4,3-b]pyridazin-8,1′-cyclohexanes]. As a result of our work, seven new pyridazinethione intermediates were prepared, which served as starting materials for the synthesis of two kinds of new ring systems: tetrazolo-pyridazines and triazolo-pyridazines. The six new annulated derivatives were characterized by physicochemical parameters. The new N-heterocycles are valuable members of the large family of pyridazines.

On the underestimated influence of synthetic conditions in solid ionic conductors

The development of high-performance inorganic solid electrolytes is central to achieving high-energy- density solid-state batteries. Whereas these solid-state materials are often prepared via classic solid-state syntheses, recent efforts in the community have shown that mechanochemical reactions, solution syntheses, microwave syntheses, and various post-synthetic heat treatment routines can drastically affect the structure and microstructure, and with it, the transport properties of the materials. On the one hand, these are important considerations for the upscaling of a materials processing route for industrial applications and industrial production. On the other hand, it shows that the influence of the different syntheses on the materials' properties is neither well understood fundamentally nor broadly internalized well. Here we aim to review the recent efforts on understanding the influence of the synthetic procedure on the synthesis - (micro)structure - transport correlations in superionic conductors. Our aim is to provide the field of solid-state research a direction for future efforts to better understand current materials properties based on synthetic routes, rather than having an overly simplistic idea of any given composition having an intrinsic conductivity. We hope this review will shed light on the underestimated influence of synthesis on the transport properties of solid electrolytes toward the design of syntheses of future solid electrolytes and help guide industrial efforts of known materials.

Microbiological versus Chemical Reductive Sulfidation: An Experimental and Theoretical Study

Microbiological reductive sulfidation (RS) has rarely been documented, although it represents an efficient strategy for thiol formation. In this work, we reported on the sulfate-respiring bacterium Desulfovibrio sp.86 that has previously demonstrated RS activity toward the pesticide chlordecone. The purpose of this study was to assess its substrate versatility using a set of 28 carbonyls, to compare with chemical RS and to rationalize the observed trends using a dual experimental and theoretical approach. The chemical RS generally proceeds in two steps (S/O exchange using a sulfur donor like P₄S₁₀, reduction of the thione intermediate). Intriguingly, chlordecone was found to be converted into chlordecthiol following the first step. Hence, we designed a protocol and applied it to the 28 substrates to assess their propensity to be directly converted into thiols with the P₄S₁₀ treatment alone. Finally, we performed density functional theory calculations on these carbonyls and their thiocarbonyl derivatives to build a set of structural, electronic, and thermodynamic parameters. The results showed that chemical and microbiological RS probably involved two distinct mechanisms. Chemically, we observed that several carbonyls, possessing electron-withdrawing groups and/or aromatic rings, were directly transformed into thiols in the presence of P₄S₁₀. The correlation obtained with the electron affinity of the thiones led us to conclude that a probable single-electron reductive transfer occurred during the first step. We also found that Desulfovibrio sp.86 transformed a variety of aldehydes and ketones, without ever detecting thiones. No significant correlation was observed with the calculated parameters, but a relationship between aldehyde RS biotransformation and bacterial growth was observed. Differences in selectivity with chemical RS open the way for further applications in organic synthesis.

Transformation of the recalcitrant pesticide chlordecone by Desulfovibrio sp.86 with a switch from ring-opening dechlorination to reductive sulfidation activity

The insecticide chlordecone has been used in the French West Indies for decades, resulting in long term pollution, human health problems and social crisis. In addition to bacterial consortia and Citrobacter sp.86 previously described to transform chlordecone into three families of transformation products (A: hydrochlordecones, B: polychloroindenes and C: polychloroindenecarboxylic acids), another bacterium Desulfovibrio sp.86, showing the same abilities has been isolated and its genome was sequenced. Ring-opening dechlorination, leading to A, B and C families, was observed as previously described. Changing operating conditions in the presence of chlordecone gave rise to the formation of an unknown sulfur-containing transformation product instead of the aforementioned ones. Its structural elucidation enabled to conclude to a thiol derivative, which corresponds to an undocumented bacterial reductive sulfidation. Microbial experiments pointed out that the chlordecone thiol derivative was observed in anaerobiosis, and required the presence of an electron acceptor containing sulfur or hydrogen sulfide, in a confined atmosphere. It seems that this new reaction is also active on hydrochlordecones, as the 10-monohydrochlordecone A1 was transformed the same way. Moreover, the chlordecone thiol derivative called F1 was detected in several chlordecone contaminated mangrove bed sediments from Martinique Island, highlighting the environmental relevance of these results.