Determination of linear alkylbenzenesulfonates in sewage sludge by high-resolution gas chromatography/mass spectrometry

Analysis of surfactants by mass spectrometry: Coming to grips with their diversity

Surfactants are surface-active agents widely used in numerous applications in our daily lives as personal care products, domestic, and industrial detergents. To determine complex mixtures of surfactants and their degradation products, unselective and rather insensitive methods, based on colorimetric and complexometric analyses are no longer employable. Analytical methodologies able to determine low concentration levels of surfactants and closely related compounds in complex matrices are required. The recent introduction of robust, sensitive, and selective mass spectrometry (MS) techniques has led to the rapid expansion of the surfactant research field including complex mixtures of isomers, oligomers, and homologues of surfactants as well as their chemically and biodegradation products at trace levels. In this review, emphasis is given to the state-of-the-art MS-based analysis of surfactants and their degradation products with an overview of the current research landscape from traditional methods involving hyphenate techniques (gas chromatography-MS and liquid chromatography-MS) to the most innovative approaches, based on high-resolution MS. Finally, we outline a detailed explanation on the utilization of MS for mechanistic purposes, such as the study of micelle formation in different solvents.

High-frequency ultrasound treatment of sludge: combined effect of surfactants removal and floc disintegration

Ultrasounds represent an effective technology in many research fields. In sewage sludge treatment, low-frequency ultrasound, particularly at 20 kHz, are widely used for sludge disintegration before the anaerobic digestion, while in the last years novel application of high-frequency ultrasound regards the decontamination of water and wastewater through sonochemical reactions. The innovative approach presented in this paper is the treatment of sewage sludge with ultrasound at 200 kHz for obtaining efficient sludge disintegration and the removal of the linear alkylbenzenesulphonates (LAS) at the same time. Results of the sonolysis experiments showed that native LAS degradation up to 40% can be achieved with low power input in less than 1h. The degradation pattern was different for each LAS homologue (from C10 to C13), because of their physical-chemical properties, in particular as regards the alkyl chain length. This high-frequency ultrasound irradiation resulted effective also in terms of floc disintegration and soluble organic matter release, in particular for energy inputs higher than 30,000 kJ/kg TS. The disrupting effect of the 200 kHz treatment was also evaluated by microscope analyses and determination of the extracellular polymeric substances release in the liquid phase.

Trace determination of linear alkylbenzene sulfonates: application in artificially polluted soil-carrots system

Surfactants are widely used in household and industrial products. The risk of incorporation of linear alkylbenzene sulfonates (LAS) from biosolids, wastewater, and fertilizers land application to the food chain is being assessed at present by the European Union. In the present work, a complete analytical method for LAS trace determination has been developed and successfully applied to LAS (C10-C13) uptake in carrot plants used as model. These carrots were grown in soil with the trace organics compounds added directly into the plant containers in pure substances form. LAS trace determination (mug kg(-1) dry matter) in carrots samples was achieved by Soxtec apparatus and high-performance liquid chromatography-fluorescence detection. The methodology developed provides LAS determination at low detection limits (5 mug kg(-1) dry matter) for carrot sample (2 g dry matter) with good recoveries rate (>90%). Transfer of LAS has been followed into the various parts of the carrot plant. LAS are generally found in the carrot leaves and percentage transfer remains very low (0.02%).

Limitation of the concentration of organic pollutants in sewage sludge for agricultural purposes: A case study in South Spain

In 2000, the EU published the third draft of a future sludge directive entitled "Working document on sludge" where limit values for some organic compounds, including di-(2-ethyhexyl)phthalate (DEHP), sum of nonylphenol (NP), nonyphenol mono-(NP1EO) and diethoxylates (NP2EO), seven polychlorinated biphenyl congeners (PCB), polycyclic aromatic hydrocarbons (PAH) and linear alkylbenzene sulphonates (LAS), are fixed. In the present work, the monitoring of these organic compounds in sludge samples from four wastewater treatment plants (WWTPs) is reported. All WWTPs use anaerobic biological stabilization of sludge. The highest concentration levels were found for LAS, NPE and DEHP, in this order, with, in general, anaerobically-digested dehydrated sludge and compost samples being the most contaminated samples. DEHP, NPE, LAS and PAH were found at concentration levels above the limit values fixed in the third draft of the future EU sludge directive in the 44%, 88%, 13% and 6% of the analyzed anaerobically-digested dehydrated sludge and compost samples.

Degradation of anionic surfactants during drying of UASBR sludges on sand drying beds

Anionic surfactant (AS) concentrations in wet up-flow anaerobic sludge blanket reactor (UASBR) sludges from five sewage treatment plants (STPs) were found to range from 4480 to 9,233 mg kg(-1)dry wt. (average 7,347 mg kg(-1)dry wt.) over a period of 18 months. After drying on sand drying beds (SDBs), AS in dried-stabilized sludges averaged 1,452 mg kg(-1)dry wt., a reduction of around 80%. The kinetics of drying followed simple first-order reduction of moisture with value of drying constant (k(d))=0.051 d(-1). Reduction of AS also followed first-order kinetics. AS degradation rate constant (k(AS)) was found to be 0.034 d(-1) and half-life of AS as 20 days. The order of rates of removal observed was k(d)>k(AS)>k(COD)>k(OM) (drying >AS degradation>COD reduction>organic matter reduction). For the three applications of dried-stabilized sludges (soil, agricultural soil, grassland), values of risk quotient (RQ) were found to be <1, indicating no risk.

Characterization of sulfonated azo dyes and aromatic amines by pyrolysis gas chromatography/mass spectrometry

Sixteen sulfonated and unsulfonated azo dyes as well as eleven sulfonated and unsulfonated aromatic amines were analyzed and qualitatively characterized by means of pyrolysis gas chromatography/mass spectrometry at different temperatures. Aniline and aminonaphthalene were found to be the dominant pyrolysis products of sulfonated aromatic amines and dyes. Azo dye and dye class specific key compounds such as benzidine, vinyl-p-base and 4-aminoazobenzene could be identified by pyrolysis gas chromatography/mass spectrometry of commercial acid, cationic, direct, reactive and solvent dyes. 500 degrees C was the optimal pyrolysis temperature for most of the pyrolyzed compounds. The method was applied to a dried sample of a textile wastewater concentrate from a dyeing process. Reactive azo dyes of the group of Remazol dyes and anthraquinone dyes could be identified as the major compounds of the sample. The finding of caprolactam (a printing additive) suggests that the wastewater contained effluent from a process of heat-activated printing with reactive dyes. p-Chloraniline, a banned aromatic amine, was identified. Chemical reduction of the wastewater sample prior to pyrolysis resulted in the release of volatile aromatic amines and aided the classification of several products of pyrolysis.

Effect of linear alkylbenzene sulphonates (LAS) on the anaerobic digestion of sewage sludge

Batch anaerobic biodegradation tests with different alkylbenzene sulphonates (LAS) at increasing concentrations were performed in order to investigate the effect of LAS homologues on the anaerobic digestion process of sewage sludge. Addition of LAS homologues to the anaerobic digesters increased the biogas production at surfactant concentrations 5-10 g/kg dry sludge and gave rise to a partial or total inhibition of the methanogenic activity at higher surfactant loads. Therefore, at the usual LAS concentration range in sewage sludge, no adverse effects on the anaerobic digesters functioning of a wastewater treatment plant (WWTP) can be expected. The increase of biogas production at low surfactant concentrations was attributed to an increase of the bioavailability and subsequent biodegradation of organic pollutants associated with the sludge, promoted by the surfactant adsorption at the solid/liquid interface. When the available surfactant fraction in the aqueous phase instead of the nominal surfactant concentration was used to evaluate the toxicity of LAS homologues, a highly significant relationship between toxicity and alkyl chain length was obtained. Taking into account the homologue distribution of commercial LAS in the liquid phase of the anaerobic digesters of a WWTP, an EC(50) value of 14 mg/L can be considered for LAS toxicity on the anaerobic microorganisms.

Simultaneous extraction and determination of anionic surfactants in waters and sediments

A new method has been developed for the simultaneous determination of the most frequently used anionic surfactants - linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES) and alkyl sulfates (AS) - in aqueous and sediment samples. Preconcentration and purification of water samples are carried out by means of solid-phase extraction (SPE). The efficiency of two different extraction methods for the analysis of sediments - Soxhlet extraction and pressurized liquid extraction (PLE) - has been compared. Identification and quantification of the target compounds is performed using a liquid chromatography - mass spectrometry (LC-MS) system equipped with an electrospray interface (ESI) in negative ion-mode. Homologue recoveries are 85-123% for SPE, 94-112% for Soxhlet extraction and 81-125% for PLE in the case of LAS, and 60-94% for SPE, 61-109% for Soxhlet extraction and 55-99% for PLE in the case of AES, whereas the limits of detection are 0.1-0.5 ngml(-1) in water and 1-5 ngg(-1) in sediment. This method has been applied to the determination of anionic surfactants in the Guadalete estuary (SW Spain), and LAS concentration levels from 538 to 1014 ngg(-1) in sediments and from 25.1 to 64.4 ngml(-1) in waters have been found. AES values from 168 to 536 ngg(-1) in sediments and from 4.5 to 11.9 ngml(-1) in waters are reported for the first time in European rivers.

Inhibition of Biogas Production by Alkyl Benzene Sulfonates (LAS) in a Screening Test for Anaerobic Biodegradability

The effect of the inoculum source on the digestion of linear alkylbenzene sulfonates (LAS) under anaerobic conditions has been investigated. The potential for primary and ultimate LAS biodegradation of anaerobic sludge samples obtained from wastewater treatment plants (WWTPs) of different geographical locations was studied applying a batch test system. It was found that only 4-22% of the LAS added to the batch anaerobic digesters was primarily transformed suggesting a poor primary degradation of the LAS molecule in anaerobic discontinuous systems. Regarding ultimate biodegradation, the addition of LAS to the batch anaerobic digesters caused a reduction on the extent of biogas production. Significant differences in the inhibition extent of the biogas production were observed (4-26%) depending on the sludge used as inoculum. Effect of the surfactant on the anaerobic microorganisms was correlated with its concentration in the aqueous phase. Sorption of LAS on anaerobic sludge affects its toxicity by depletion of the available fraction of the surfactant. LAS content on sludge was related to the total amount of calcium and magnesium extractable ions. The presence of divalent cations promote the association of LAS with anaerobic sludge reducing its bioavailability and the extent of its inhibitory effect on the biogas production.

Anaerobic digestion of linear alkyl benzene sulfonates: biodegradation kinetics and metabolite analysis

In the present work the effect of the alkyl chain length and the position of the sulfophenyl substituent of the linear alkylbenzene sulfonates (LAS) on their anaerobic biodegradability have been investigated. Degradation kinetics of the linear alkyl benzene sulfonates homologues, 2phiC10LAS, 2phiC12LAS and 2phiC14LAS, have been studied. It has been also investigated the effect of the isomer type on the degradation rate of the LAS molecule through the comparative study of the 2phiC10LAS and 5phiC10LAS isomers. Batch anaerobic biodegradation tests were performed using sludge from the anaerobic digester of a wastewater treatment plant as microorganisms source. Ultimate biodegradation was evaluated from the biogas production whereas primary biodegradation was determined by specific analysis of the surfactant. LAS homologues and isomers showed a negligible primary biodegradation under anaerobic conditions. Furthermore, analysis of sulfophenyl carboxilates (SPC) by LC-MS indicated a low and constant level of these LAS degradation metabolites over the test period. These data are consistent with a minimal transformation of the LAS parent molecule in the anaerobic digesters. On the other hand, the addition of the shortest alkyl chain length homologues, decyl and dodecylbenzene sulfonates, reduces the biogas production whereas the most hydrophobic homologue, the tetradecylbenzene sulfonate, enhances the biogas production. This LAS homologue seems to increase the availability of organic compounds sorbed on the anaerobic sludge promoting their biodegradation.

Differentiation and quantification of linear alkyl benzenesulfonate isomers by liquid chromatography-ion-trap mass spectrometry

Discrimination and quantitation of the 20 positional isomers of C10-C13 linear alkyl benzenesulfonates (LASs), based on the use of reversed-phase liquid chromatography-electrospray ionisation in negative ion mode ion-trap mass spectrometry, was undertaken. Discrimination was achieved by LAS MS-MS analysis into the ion trap, by monitoring specific fragment ions resulting from the benzylic cleavage of the carbon alkyl chain on both side of the LAS phenyl group. Parameters affecting the electrospray ionisation source and the ion-trap operation were optimised. Calibration curves for the different isomers were established and this permitted their quantitation by mass spectrometry for the first time. MS-MS responses were dependent on both the position of the phenyl group on the alkyl chain and the length of this alkyl chain, these responses being higher for the external isomers and the longer alkyl chain homologues. The precision, expressed as relative standard deviation ranged between 9 and 13%. Detection limits for LAS isomers were between 0.03 and 0.07 mg/l and therefore the method is sensitive enough to be applied to environmental samples.

Characterization and Determination of Linear Alkylbenzenesulfonates in Environmental Water Samples by High-Performance Liquid Chromatography with a Hydrophilic Polymer Column and Electrospray Ionization Mass Spectrometric Detection

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.

Determination of linear alkylbenzensulfonates in aqueous matrices by ion-pair solid-phase microextraction-in-port derivatization-gas chromatography-mass spectrometry

Trace determination (low ng/ml) of linear alkylbenzensulfonates (LASs) in water was achieved by solid-phase microextraction (SPME) of ion-pairs formed with tetrabutylammonium. This ion-pairing reagent served two purposes. First, it allowed the extraction of LAS with the polydimethylsiloxane fiber by counterion association and second, the derivatization of the formed LAS ion pairs in the GC injection port at 300 degrees C to form the corresponding sulfonated butyl esters. The methodology developed allows the isomer specific determination of LAS at low detection limits (0.16-0.8 ng/ml), depending on the alkyl chain lengths of LASs with RSDs of 10-12%. Furthermore, the developed methodology was applied to urban wastewater and sea water and compared with a solid-phase extraction (SPE) method (e.g. C18 and strong anion-exchange sorbent) to obtain concordant values for urban wastewater. Moreover, the developed SPME methodology overcame the procedural blank and matrix-dependent recoveries found in the SPE methodologies at low LAS concentrations.

Determination of surfactants and some of their metabolites in untreated and anaerobically digested sewage sludge by subcritical water extraction followed by liquid chromatography-mass spectrometry

Enormous amounts of sewage sludge are worldwide generated and released into the environment. Analysis of the most common and/or toxic chemicals in sludge should be mandatory before deciding its destination. Surfactants and some of their breakdown products are invariably the most common organic contaminants in domestic sewage sludge. For determining these compounds, we have developed a method based on extraction with subcritical water followed by liquid chromatography-mass spectrometry. On extracting surfactants and their metabolites from 50 mg of sludge, the efficiency of the water extraction device was evaluated in terms of pH of the extractant, temperature, and time of the static extraction. The best extraction conditions were obtained by using carbonate buffer (pH 9.4) at 200 degrees C as extractant, 10 min of static extraction at the pressure of 100 bar followed by 17 min of dynamic extraction. Analyte collection was performed by inserting a solid-phase extraction cartridge downstream the extraction cell. Compared to 16-h Soxhlet extraction with methanol, this procedure was remarkably more efficient in extracting anionic surfactants and acidic metabolites of nonylphenol ethoxylates (NPECs). A short survey was conducted to estimate concentration changes of target compounds after 14-d sludge anaerobic digestion. Results showed that 54-74% of both neutral and weakly acidic ethoxylate species were removed after residence of the sludge in the digester. On the contrary, little, if any, removal of anionic surfactants was observed after the digestion treatment. As expected, the level of nonylphenol increased under anaerobic conditions.

Separation and determination of homologues of linear alkylbenzenesulfonates by nonaqueous capillary zone electrophoresis using alkylammonium salts in ethanol

The separation of linear alkylbenzene sulfonates (LAS) by nonaqueous capillary electrophoresis (NACE) using negative polarity, and a buffer containing acetic acid and an alkylamine in nonaqueous ethanol, has been investigated. Several primary, secondary, and tertiary alkylamines with alkyl chains of different length were compared. The solutes travelled against the electroosmotic flow (EOF), and at the same time were braked by association with the alkylamine molecules or with the alkylammonium ions. The best resolution between adjacent LAS homologues (R approximately 2.1), partial isomer resolution in two peaks, and at the same time an excellent repeatability, was obtained with a small dipentylamine excess over the acetic acid. When the buffer concentration increased, resolution between the homologues increased slightly (R approximately 2.4), and a different isomer group was partially separated. A background electrolyte (BGE) containing 10 mM acetic acid and 20 mM dipentylamine to separate and quantify the homologues within 25 min is recommended. The isomer peak profile with up to three peaks can be estimated using this buffer and another one with 80 mM acetic acid and 90 mM dipentylamine. The former BGE was used to determine LAS in liquid and powder laundry detergents. The detection limit for the determination of total LAS in these products was 2.5 microg mL(-1), and the peak area and migration time interday repeatabilities were below 4.3 and 2.8%, respectively.

Preconcentration of contaminants in water analysis

Among the environmental areas, in this review attention will be focused on water matrices and both on organic (e.g., pesticides, herbicides, phenols, polycyclic aromatic hydrocarbons), inorganic species and anion pollutants, since these kinds of substances include a wide number of compounds with different physical and chemical properties and different effects on human health. Analytical methods for control of quality of waters are required to be highly specific and possibly highly sensitive for the determination of even low amounts of pollutants. The main problems encountered during the analysis are the separation of matrix components from the pollutants of interest and the achievement of low detection limits. Therefore an overview on different materials and techniques available for sample concentration and/or matrix removal will be provided and discussed according to the chemical characteristics of the pollutant that has to be enriched.

Extraction and isolation of linear alkylbenzenesulfonate and its sulfophenylcarboxylic acid metabolites from fish samples

Linear alkylbenzenesulfonate (LAS) is the most widely used synthetic surfactant. In fish, assessment of the environmental risk and investigation of the biotransformation behavior of LAS require compound-specific methods for extraction and isolation of LAS and its biotransformation products, sulfophenylcarboxylic acids (SPC). Matrix solid-phase dispersion (MSPD) extraction with subsequent ion-pair liquid-liquid (IP-LL) partitioning of the extract was a time-efficient sample preparation method for analysis of LAS. The recovery of parent LAS from spiked fish exceeded 70%, and the limit of quantitation ranged around 0.2 mg.kg-1 corresponding to 0.6 mumol.kg-1. In a simultaneous determination of LAS and SPC in fish, the analytes were MSPD extracted in different fractions. The target compounds were separated from the sample matrix by protein precipitation and subsequent isolation of (a) SPC by graphitized carbon black solid-phase extraction of the supernatant and (b) parent LAS by IP-LL partitioning of the pellet obtained after protein precipitation. The recoveries of the model compounds C12-2-LAS and C4-3-SPC were 84 +/- 6 and 65 +/- 11%, respectively. The use of C3-3-SPC as an internal standard corrected for the loss of the biotransformation product during sample workup. The suitability of both methods was demonstrated by analyzing fish containing LAS and SPC incurred during aqueous exposure.

Fate and effects of linear alkylbenzene sulphonates (LAS) in the terrestrial environment

Linear alkylbenzene sulphonates (LAS) are a group of anionic surfactants, characterised by having both a hydrophobic and a hydrophilic group. LAS is one of the major ingredients of synthetic detergents and surfactants and is used world-wide for both domestic and industrial applications. LAS is relatively rapidly aerobically degraded, but only very slowly or not at all degraded under anaerobic conditions. Therefore, LAS can be found in very high concentrations in most sewage sludge and enter the soil compartment as a result of sludge application. LAS can be found in elevated concentrations in soil immediately after sludge amendment, but a half-life of approximately 1-3 weeks will generally prevent accumulation in soil and biota. The concentration in soils that have not received sewage sludge recently, is generally less than 1 mg kg-1 and not more than 5 mg LAS kg-1. This is below the lowest concentration of LAS where effects have been observed in the laboratory. The laboratory data is in accordance with field studies using aqueous solutions of the sodium salt of LAS. However, observations of the ecological impact of sewage sludge applications or application of LAS spiked into sludge indicates a lower toxicity of LAS when applied in sludge. On the basis of the information reviewed in this paper, it is concluded that LAS can be found in high concentrations in sewage sludge, but that the relatively rapid aerobic degradation and the reduced bioavailability when applied via sludge, most likely will prevent LAS from posing a threat to terrestrial ecosystems on a long term basis.

Determination of linear alkylbenzenesulfonates and their degradation products in water samples by gas chromatography with ion-trap mass spectrometry

A method was developed for the analysis of linear alkylbenzenesulfonates (LAS) and their degradation products, sulfophenylcarboxylic acids (SPC), in samples of sewage effluent and river water. This method involved extraction of the samples by graphitized carbon black cartridge, esterification by a two-step thionyl chloride-trifluoroethanol derivatization procedure, and separation, identification and quantitation by ion-trap GC-MS with EI and low pressure CI modes. High selectivity with few signals was observed in the low pressure CI mass spectra of LAS and SPC. Enhanced sensitivity with protonated molecular ion chromatograms of homologous C10-C13 LAS by CI-MS permit the determination of LAS and SPC at trace concentrations in environmental samples. Recovery rates of LAS and SPC in spiked water samples ranged from 75 to 112% with R.S.D. values from 3 to 26%. The limit of quantitation for both LAS and SPC was estimated to be 0.01 microgram/l in 100 ml of water sample.

Biodegradation kinetics of linear alkylbenzene sulfonate in sludge-amended agricultural soils

The kinetics of ultimate biodegradation (mineralization to CO2) of linear alkylbenzene sulfonate (LAS) were studied in sludge-amended agricultural soils for a series of pure chain length LAS homologs containing 10 to 14 carbon atoms in the alkyl chain. Degradation rates were measured by following the production of 14CO2 from uniformly 14C-ring-labeled material. In general, degradation of LAS was rapid in soil over a broad concentration range (0.1 to 10 times the expected environmental concentration) and demonstrated little variation among different homologs. Half-lives for mineralization of the benzene ring ranged from 18 to 26 days and were not significantly different for any homolog over the range of alkyl chain lengths tested. Half-lives measured for LAS degradation in these studies were comparable to values reported in the literature and also to values obtained for naturally occurring materials (stearic acid, cellulose) typically present in soil environments. On the basis of the results of the present studies and those of other investigators, it is concluded that soil environments exposed to LAS in sewage sludges contain microbial communities which can actively metabolize this material. Rates of biodegradation of the benzene ring, the final step in the LAS biodegradation pathway prior to complete mineralization, are also sufficient to prevent LAS from accumulating in soil environments.

Determination of linear alkylbenzenesulphonates, alkylphenol polyethoxylates and nonylphenol in waste water by high-performance liquid chromatography after enrichment on octadecylsilica

An enrichment procedure involving percolation through octadecylsilica cartridges was applied to the extraction of linear alkylbenzenesulphonates (LASs), alkylphenol polyethoxylates (APEOs) and nonylphenol (NP) from treated and untreated municipal waste waters. The analytes were quantitated by reversed-phase high-performance liquid chromatography with UV-fluorescence detection. Recoveries higher than 80% were obtained from the analysis of biologically treated waste waters. The method allows rapid, precise and reliable determination of LASs and APEOs at concentrations as low as 20 and 4 micrograms l-1, respectively.