Analysis of gold(I/III)-complexes by HPLC-ICP-MS demonstrates gold(III) stability in surface waters

Propargylic-linked [5]helicene derivative for selective Au3+ detection in near-perfect aqueous media with applications in diverse real samples, paper test strips, and human cells

Gold is classified as a heavy metal, and its ion (Au3+) can manifest adverse impacts on ecological and human health. Thus, an effective method for Au3+ detection is highly required. In this work, a new [5]helicene-based fluorescence sensor (M202P) was synthesized and applied for Au3+ monitoring in near-perfect aqueous media. M202Prapidly detected Au3+ through a fluorescence quenching response and furnished a large Stokes shift of 157 nm. The Au3+ sensing ability of M202P allowed it to withstand interference from other metal ions, with a detection limit for Au3+ of 8.0 ppb. The mechanism underlying its Au3+ detection was the coordination of Au3+ with the alkyne and carbonyl oxygen, leading to the later hydration of alkynyl moiety, as thoroughly proven by FTIR, 1H NMR, 13C NMR, and HRMS, with the stoichiometric ratio of 1:1 according to Job's plot. In addition, M202P can be used for the quantitative analysis and qualitative fluorescence assay of Au3+ levels in environmental waters and fertilizer solutions. This sensor also demonstrated high potential as a fluorescence tracking agent in human cells and was utilized in fabricating a paper test strip.

Sensitive Fluorescent Probe for Al3+, Cr3+ and Fe3+: Application in Real Water Samples and Logic Gate

Construction of single probes for simultaneous detection of common trivalent metal ions has attracted much attention due to higher efficiency in analysis and cost. A naphthalimide-based fluorescent probe K1 was synthesized for selective detection of Al3+, Cr3+ and Fe3+ ions. Fluorescence emission intensity at 534 nm of probe K1 in DMSO/H2O (9:1, v/v) was significantly enhanced upon addition of Al3+, Cr3+ and Fe3+ ions while addition of other metal ions (Li+, Na+, K+, Ag+, Cu2+, Fe2+, Zn2+, Co2+, Ni2+, Mn2+, Sr2+, Hg2+, Ca2+, Mg2+, Ce3+, Bi3+ and Au3+) did not bring about substantial change in fluorescence emission. The calculated detection limits were 0.32 µM, 0.81 µM, and 0.27 µM for Al3+, Cr3+, and Fe3+, respectively. Probe K1 displayed strong anti-interference ability, a large Stokes shift, rapid response, and applicability in a wide pH range for the simultaneous detection of Al3+, Cr3+ and Fe3+ in real water samples. Job's plot test showed that the stoichiometric ratio of the complexes formed between probe K1 and the trivalent metal ions was 1:1. The reversible application of probe K1 was realized by addition of Na2EDTA. A molecular logic gate was built based on the input-output information. This approach may provide a basis for highly selective and sensitive detection of common trivalent cations and for design of memory devices.

A gold speciation that adds a second layer to synergistic gold-copper toxicity in Cupriavidus metallidurans

The metal-resistant bacterium Cupriavidus metallidurans occurs in metal-rich environments. In auriferous soils, the bacterium is challenged by a mixture of copper ions and gold complexes, which exert synergistic toxicity. The previously used, self-made Au(III) solution caused a synergistic toxicity of copper and gold that was based on the inhibition of the CupA-mediated efflux of cytoplasmic Cu(I) by Au(I) in this cellular compartment. In this publication, the response of the bacterium to gold and copper was investigated by using a commercially available Au(III) solution instead of the self-made solution. The new solution was five times more toxic than the previously used one. Increased toxicity was accompanied by greater accumulation of gold atoms by the cells. The contribution of copper resistance determinants to the commercially available Au(III) solution and synergistic gold-copper toxicity was studied using single- and multiple-deletion mutants. The commercially available Au(III) solution inhibited periplasmic Cu(I) homeostasis, which is required for the allocation of copper ions to copper-dependent proteins in this compartment. The presence of the gene for the periplasmic Cu(I) and Au(I) oxidase, CopA, decreased the cellular copper and gold content. Transcriptional reporter gene fusions showed that up-regulation of gig, encoding a minor contributor to copper resistance, was strictly glutathione dependent. Glutathione was also required to resist synergistic gold-copper toxicity. The new data indicated a second layer of synergistic copper-gold toxicity caused by the commercial Au(III) solution, inhibition of the periplasmic copper homeostasis in addition to the cytoplasmic one.IMPORTANCEWhen living in auriferous soils, Cupriavidus metallidurans is not only confronted with synergistic toxicity of copper ions and gold complexes but also by different gold species. A previously used gold solution made by using aqua regia resulted in the formation of periplasmic gold nanoparticles, and the cells were protected against gold toxicity by the periplasmic Cu(I) and Au(I) oxidase CopA. To understand the role of different gold species in the environment, another Au(III) solution was commercially acquired. This compound was more toxic due to a higher accumulation of gold atoms by the cells and inhibition of periplasmic Cu(I) homeostasis. Thus, the geo-biochemical conditions might influence Au(III) speciation. The resulting Au(III) species may subsequently interact in different ways with C. metallidurans and its copper homeostasis system in the cytoplasm and periplasm. This study reveals that the geochemical conditions may decide whether bacteria are able to form gold nanoparticles or not.

Characterization and quantification of silver complexes with dissolved organic matter by size exclusion chromatography coupled to ICP-MS

The fate and behavior of silver in aquatic systems is intricately determined by its interactions with dissolved organic matter (DOM). In this study, we have introduced a method for identification and quantification of silver-DOM complexes using size exclusion chromatography-inductively coupled plasma mass spectrometry (SEC-ICP-MS). Our findings revealed that silver(I) was weakly bound to Suwannee River humic acid, fulvic acid, and natural organic matter (SRHA, SRFA, and SRNOM) in various media, resulting in facile dissociation during chromatographic separation. Suitable chromatographic conditions were determined for the elution of Ag-DOM complexes, involving the use of 0.5 mM ammonium acetate (pH 7) as the mobile phase and silver-aged column (pre-absorbing 0.1-0.7 μg silver(I)). SEC-UV and SEC-ICP-MS chromatograms revealed that Ag-binding fractions of DOM were dominated by its aromatic compounds. The quantification of silver-DOM complexes was achieved by SEC-ICP-MS combination with on-line isotope dilution. Silver at concentrations below 20 µg L-1 was mainly present in the form of organic complexes in low salinity water. These measurements aligned well with the results obtained using the equilibrium dialysis method. Species analyses of Ag-DOM complexes provide a deeper understanding of the reactivity, transport, and fate of silver in aquatic environments. ENVIRONMENTAL IMPLICATION: Ionic silver is highly toxic to aquatic organisms such as fish and zooplankton. The complexation of silver with binding sites within DOM significantly influences its speciation, mobility, and toxicity. Despite the complex and unknown structure of silver-DOM complexes, this study provided a SEC-ICP-MS method to identify and quantify these complexes in a range of media. By uncovering the formation of silver-DOM complexes across diverse media, this work enhances the comprehension of silver transformation processes and associated environmental risks in aquatic environments.

From biomolecules to biogeochemistry: Exploring the interaction of an indigenous bacterium with gold

Specialised microbial communities colonise the surface of gold particles in soils/sediments, and catalyse gold dissolution and re-precipitation, thereby contributing to the environmental mobility and toxicity of this 'inert' precious metal. We assessed the proteomic and physiological response of Serratia proteamaculans, the first metabolically active bacterium enriched and isolated directly from natural gold particles, when exposed to toxic levels of soluble Au3+ (10 μM). The results were compared to a metal-free blank, and to cultures exposed to similarly toxic levels of soluble Cu2+ (0.1 mM); Cu was chosen for comparison because it is closely associated with Au in nature due to similar geochemical properties. A total of 273 proteins were detected from the cells that experienced the oxidative effects of soluble Au, of which 139 (51%) were upregulated with either sole expression (31%) or had synthesis levels greater than the Au-free control (20%). The majority (54%) of upregulated proteins were functionally different from up-regulated proteins in the bacteria-copper treatment. These proteins were related to broad functions involving metabolism and biogenesis, followed by cellular process and signalling, indicating significant specificity for Au. This proteomic study revealed that the bacterium upregulates the synthesis of various proteins related to oxidative stress response (e.g., Monothiol-Glutaredoxin, Thiol Peroxidase, etc.) and cellular damage repair, which leads to the formation of metallic gold nanoparticles less toxic than ionic gold. Therefore, indigenous bacteria may mediate the toxicity of Au through two different yet simultaneous processes: i) repairing cellular components by replenishing damaged proteins and ii) neutralising reactive oxygen species (ROS) by up-regulating the synthesis of antioxidants. By connecting the fields of molecular bacteriology and environmental biogeochemistry, this study is the first step towards the development of biotechnologies based on indigenous bacteria applied to gold bio-recovery and bioremediation of contaminated environments.

Determination of xanthates as Cu(II) complexes by high-performance liquid chromatography - Inductively coupled plasma tandem mass spectrometry

The present study provides a novel, selective analysis method for the determination of low xanthate concentrations. The rising concern over the environmental effects of xanthates demands the development of analysis methods which this study answers. Complex formation in aqueous solution between xanthates and an excess of Co(II), Ni(II), Pb(II), Cd(II), Cu(II), and Zn(II) ions was utilized to selectively determine xanthates by high-performance liquid chromatography-inductively coupled plasma tandem mass spectrometry for the first time. The complexes that were formed were extracted to ethyl acetate using liquid-liquid extraction and separated by high-performance liquid chromatography technique before the quantitative determination of metal ions and sulfur in the xanthate complexes. Good separation and high measurement sensitivity were achieved using Cu(II) as the complex metal ion. The analysis method was optimized for the determination of sodium isopropyl xanthate and sodium isobutyl xanthate with detection limits of 24.7 and 13.3 μg/L, respectively. With a linear calibration range of 0.1-15 mg/L and a total analysis time of 4-5 min, the present method is a fast and sensitive option for selective xanthate determination.

Charge transfer interactions exist in extracellular polymeric substances: Comparison with natural organic matter

Extracellular polymeric substances (EPS) and natural organic matter (NOM) are widely present in the environment. While the molecular basis of NOM's optical properties and reactivity after treatment with sodium borohydride (NaBH₄) has been successfully explained by the charge transfer (CT) model, the corresponding structure basis and properties of EPS remain poorly understood. In this work, we investigated the reactivity and optical properties of EPS after NaBH₄ treatment, comparing them to the corresponding changes in NOM. After reduction, EPS exhibited optical properties and a reactivity with Au³⁺ similar to NOM, manifesting an irreversible loss of visible absorption (≥70%) associated with blue-shifted fluorescence emission (8-11 nm) and a lower rate of gold nanoparticles formation (decreasing by ≥ 32%), which can be readily explained by the CT model as well. Furthermore, the absorbance and fluorescence spectra of EPS were solvent polarity dependent, contrary to the superposition model. These findings contribute to an original understanding of the reactivity and optical properties of EPS and facilitate further cross-disciplinary studies.

Gold in the Oxidized Ores of the Olympiada Deposit (Eastern Siberia, Russia)

Native gold and its satellite minerals were studied throughout the 300 m section of oxidized ores of the Olympiada deposit (Eastern Siberia, Russia). Three zones are identified in the studied section: Upper Zone ~60 g/t Au; Middle Zone ~3 g/t Au; Lower Zone ~20 g/t Au. Supergene and hypogene native gold have been found in these zones. Supergene gold crystals (~1 μm), their aggregates and their globules (100 nm to 1 μm) predominate in the Upper and less in Middle Zone. Relic hypogene gold particles (flattened, fracture and irregular morphology) are sporadically distributed throughout the section. Spongiform gold occurs in the Lower Zone at the boundary with the bedrock, as well as in the bedrock. This gold formed in the process of oxidation of aurostibite, leaching of impurities and its further dissolution. Hypogene gold is commonly isolated but for supergene gold typically associated with ferric (hydr)oxides. New formation of gold occurred due to oxidation of sulfide ores and release of “invisible” gold, as well as dissolution, mobilization and re-deposition of metallic hypogene gold. A model for the formation of oxidized ores with the participation of meteoric and low-temperature hydrothermal waters has been proposed.

Incidence of metal-based nanoparticles in the conventional wastewater treatment process

Metal-based nanoparticles (NPs) can be found in wastewater streams, which are significant pathways for the release of NPs to the environment. Determination of the NPs concentration in wastewater streams is important for performing appropriate ecotoxicological evaluations. The aim of this work was to determine the incidence of NPs from 13 different elements throughout the wastewater treatment process by using single particle inductively coupled plasma mass spectrometry (spICP-MS). The incidence was determined in samples of the influent, post-primary treatment and effluent of the activated sludge process, as well as in the reclaimed water of a full-scale wastewater treatment plant (WWTP). In addition, concentration of NPs was determined in the waste activated sludge and in the anaerobic digester. The concentration of metal-based NPs in the influent wastewater were between 1,600 and 10,700 ng/L for elements such as Ti, Fe, Ce, Mg, Zn and Cu, while that for Ni, Al, Ag, Au, Co and Cd was below 100 ng/L. Concentrations in reclaimed water ranged between 0.6 and 721 ng/L, ranked as Mg > Ti > Fe > Cu > Ni > Ce > Zn > Mn > Al  > Co > Ag > Cd  > Au. Results indicated that the activated sludge process and reclaimed water system removed 84-99% of natural and engineered metal-based NPs from influent to reclaimed water, except for Mg, Ni and Cd where the removal ranged from 70 to 78%. The highest concentrations of NPs were found in the waste activated sludge and anaerobic sludge, ranging from 0.5 to 39,900 ng/L. The size distribution of NPs differed in different wastewater streams within the WWTP, resulting in smaller particles in the effluent (20-180 nm) than in the influent (23-233 nm) for most elements. Conversely, NPs were notably larger in the waste activated sludge samples than in the anaerobic sludge or wastewater, since conditions in the secondary treatment lead to precipitation of several metal-based NPs. The incidence of metal-based NPs from 13 elements in wastewater decreased significatively after the conventional wastewater treatment train. However, anaerobic digesters store high NPs concentrations. Hence, the disposal of sludge needs to take this into account to evaluate the risk of the release of NPs to the environment.

Photochemical origin of reactive radicals and halogenated organic substances in natural waters: A review

Halogenated organic compounds, also termed organohalogens, were initially regarded to be of almost exclusively anthropogenic origin. However, recent research has demonstrated that photochemical reactions are important abiotic sources of organohalogen compounds in sunlit surface waters. Halide ions (X^-, X represents Cl, Br and I) are common anions in natural waters and might be oxidized by reactive species originated from photochemistry of dissolved organic matter (DOM) or inorganic photoactive species. The resulting reactive halogen species may react with organic substances with diverse bimolecular reaction rate constants, depending on the complexity and structure of organic substances. Therefore, the chemical mechanism of halogenation remains challenging to be fully elucidated. To better understand the trends in the existing data and to identify the knowledge gaps that may merit further investigation, this review gives an integrative summary on the sources of reactive oxygen species (ROS) and halogen radicals (X/X₂^-). Photochemical halogenation of phenolic compounds and formation of methyl halide and brominated organic pollutants are highlighted. By evaluating existing literature and identifying some uncertainties, this review emphasizes the environmental significance of sunlight-driven halogenation and proposes further research directions on mechanistic investigation and rational experimental design close to natural systems.

Comparative Insights Into the Complete Genome Sequence of Highly Metal Resistant Cupriavidus metallidurans Strain BS1 Isolated From a Gold-Copper Mine

The highly heavy metal resistant strain Cupriavidus metallidurans BS1 was isolated from the Zijin gold–copper mine in China. This was of particular interest since the extensively studied, closely related strain, C. metallidurans CH34 was shown to not be only highly heavy metal resistant but also able to reduce metal complexes and biomineralizing them into metallic nanoparticles including gold nanoparticles. After isolation, C. metallidurans BS1 was characterized and complete genome sequenced using PacBio and compared to CH34. Many heavy metal resistance determinants were identified and shown to have wide-ranging similarities to those of CH34. However, both BS1 and CH34 displayed extensive genome plasticity, probably responsible for significant differences between those strains. BS1 was shown to contain three prophages, not present in CH34, that appear intact and might be responsible for shifting major heavy metal resistance determinants from plasmid to chromid (CHR2) in C. metallidurans BS1. Surprisingly, the single plasmid – pBS1 (364.4 kbp) of BS1 contains only a single heavy metal resistance determinant, the czc determinant representing RND-type efflux system conferring resistance to cobalt, zinc and cadmium, shown here to be highly similar to that determinant located on pMOL30 in C. metallidurans CH34. However, in BS1 another homologous czc determinant was identified on the chromid, most similar to the czc determinant from pMOL30 in CH34. Other heavy metal resistance determinants such as cnr and chr determinants, located on megaplasmid pMOL28 in CH34, were shown to be adjacent to the czc determinant on chromid (CHR2) in BS1. Additionally, other heavy metal resistance determinants such as pbr, cop, sil, and ars were located on the chromid (CHR2) and not on pBS1 in BS1. A diverse range of genomic rearrangements occurred in this strain, isolated from a habitat of constant exposure to high concentrations of copper, gold and other heavy metals. In contrast, the megaplasmid in BS1 contains mostly genes encoding unknown functions, thus might be more of an evolutionary playground where useful genes could be acquired by horizontal gene transfer and possibly reshuffled to help C. metallidurans BS1 withstand the intense pressure of extreme concentrations of heavy metals in its environment.

Evidence for fungi and gold redox interaction under Earth surface conditions

Microbial contribution to gold biogeochemical cycling has been proposed. However, studies have focused primarily on the influence of prokaryotes on gold reduction and precipitation through a detoxification-oriented mechanism. Here we show, fungi, a major driver of mineral bioweathering, can initiate gold oxidation under Earth surface conditions, which is of significance for dissolved gold species formation and distribution. Presence of the gold-oxidizing fungus TA_pink1, an isolate of Fusarium oxysporum, suggests fungi have the potential to substantially impact gold biogeochemical cycling. Our data further reveal that indigenous fungal diversity positively correlates with in situ gold concentrations. Hypocreales, the order of the gold-oxidizing fungus, show the highest centrality in the fungal microbiome of the auriferous environment. Therefore, we argue that the redox interaction between fungi and gold is critical and should be considered in gold biogeochemical cycling.

Reflecting on Gold Geomicrobiology Research: Thoughts and Considerations for Future Endeavors

Research in gold (Au) geomicrobiology has developed extensively over the last ten years, as more Au-bearing materials from around the world point towards a consistent story: That microbes interact with Au. In weathering environments, Au is mobile, taking the form of oxidized, soluble complexes or reduced, elemental Au nanoparticles. The transition of Au between aqueous and solid states is attributed to varying geochemical conditions, catalyzed in part by the biosphere. Hence, a global Au-biogeochemical-cycle was proposed. The primary focus of this mini-review is to reflect upon the biogeochemical processes that contribute to what we currently know about Au cycling. In general, the global Au-biogeochemical-cycle begins with the liberation of gold-silver particles from a primary host rock, by physical weathering. Through oxidative-complexation, inorganic and organic soluble-Au complexes are produced. However, in the presence of microbes or other reductants—e.g., clays and Fe-oxides—these Au complexes can be destabilized. The reduction of soluble Au ultimately leads to the bioprecipitation and biomineralization of Au, the product of which can aggregate into larger structures, thereby completing the Au cycle. Evidence of these processes have been “recorded” in the preservation of secondary Au structures that have been observed on Au particles from around the world. These structures—i.e., nanometer-size to micrometer-size Au dissolution and reprecipitation features—are “snap shots” of biogeochemical influences on Au, during its journey in Earth-surface environments. Therefore, microbes can have a profound effect on the occurrence of Au in natural environments, given the nutrients necessary for microbial metabolism are sustained and Au is in the system.

Synergistic gold–copper detoxification at the core of gold biomineralisation inCupriavidus metallidurans

Cupriavidus metalliduransescapes synergistic Cu/Au toxicity by re-oxidation of Au(i) back to Au(iii) using the periplasmic oxidase CopA.

Synergistic Toxicity of Copper and Gold Compounds in Cupriavidus metallidurans

The bacterium Cupriavidus metallidurans can reduce toxic gold(I/III) complexes and biomineralize them into metallic gold (Au) nanoparticles, thereby mediating the (trans)formation of Au nuggets. In Au-rich soils, most transition metals do not interfere with the resistance of this bacterium to toxic mobile Au complexes and can be removed from the cell by plasmid-encoded metal efflux systems. Copper is a noticeable exception: the presence of Au complexes and Cu ions results in synergistic toxicity, which is accompanied by an increased cytoplasmic Cu content and formation of Au nanoparticles in the periplasm. The periplasmic Cu-oxidase CopA was not essential for formation of the periplasmic Au nanoparticles. As shown with the purified and reconstituted Cu efflux system CupA, Au complexes block Cu-dependent release of phosphate from ATP by CupA, indicating inhibition of Cu transport. Moreover, Cu resistance of Au-inhibited cells was similar to that of mutants carrying deletions in the genes for the Cu-exporting P_IB1-type ATPases. Consequently, Au complexes inhibit export of cytoplasmic Cu ions, leading to an increased cellular Cu content and decreased Cu and Au resistance. Uncovering the biochemical mechanisms of synergistic Au and Cu toxicity in C. metallidurans explains the issues this bacterium has to face in auriferous environments, where it is an important contributor to the environmental Au cycle.IMPORTANCE C. metallidurans lives in metal-rich environments, including auriferous soils that contain a mixture of toxic transition metal cations. We demonstrate here that copper ions and gold complexes exert synergistic toxicity because gold ions inhibit the copper-exporting P-type ATPase CupA, which is central to copper resistance in this bacterium. Such a situation should occur in soils overlying Au deposits, in which Cu/Au ratios usually are ≫1. Appreciating how C. metallidurans solves the problem of living in environments that contain both Au and Cu is a prerequisite to understand the molecular mechanisms underlying gold cycling in the environment, and the significance and opportunities of microbiota for specific targeting to Au in mineral exploration and ore processing.

Biosynthesis of gold nanoparticles by the extreme bacterium Deinococcus radiodurans and an evaluation of their antibacterial properties

Deinococcus radiodurans is an extreme bacterium known for its high resistance to stresses including radiation and oxidants. The ability of D. radiodurans to reduce Au(III) and biosynthesize gold nanoparticles (AuNPs) was investigated in aqueous solution by ultraviolet and visible (UV/Vis) absorption spectroscopy, electron microscopy, X-ray diffraction (XRD), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). D. radiodurans efficiently synthesized AuNPs from 1 mM Au(III) solution in 8 h. The AuNPs were of spherical, triangular and irregular shapes with an average size of 43.75 nm and a polydispersity index of 0.23 as measured by DLS. AuNPs were distributed in the cell envelope, across the cytosol and in the extracellular space. XRD analysis confirmed the crystallite nature of the AuNPs from the cell supernatant. Data from the FTIR and XPS showed that upon binding to proteins or compounds through interactions with carboxyl, amine, phospho and hydroxyl groups, Au(III) may be reduced to Au(I), and further reduced to Au(0) with the capping groups to stabilize the AuNPs. Biosynthesis of AuNPs was optimized with respect to the initial concentration of gold salt, bacterial growth period, solution pH and temperature. The purified AuNPs exhibited significant antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria by damaging their cytoplasmic membrane. Therefore, the extreme bacterium D. radiodurans can be used as a novel bacterial candidate for efficient biosynthesis of AuNPs, which exhibited potential in biomedical application as an antibacterial agent.

A Portable Smart-Phone Readout Device for the Detection of Mercury Contamination Based on an Aptamer-Assay Nanosensor

The detection of environmental mercury (Hg) contamination requires complex and expensive instruments and professional technicians. We present a simple, sensitive, and portable Hg²⁺ detection system based on a smartphone and colorimetric aptamer nanosensor. A smartphone equipped with a light meter app was used to detect, record, and process signals from a smartphone-based microwell reader (MR S-phone), which is composed of a simple light source and a miniaturized assay platform. The colorimetric readout of the aptamer nanosensor is based on a specific interaction between the selected aptamer and Hg²⁺, which leads to a color change in the reaction solution due to an aggregation of gold nanoparticles (AuNPs). The MR S-phone-based AuNPs-aptamer colorimetric sensor system could reliably detect Hg²⁺ in both tap water and Pearl River water samples and produced a linear colorimetric readout of Hg²⁺ concentration in the range of 1 ng/mL-32 ng/mL with a correlation of 0.991, and a limit of detection (LOD) of 0.28 ng/mL for Hg²⁺. The detection could be quickly completed in only 20 min. Our novel mercury detection assay is simple, rapid, and sensitive, and it provides new strategies for the on-site detection of mercury contamination in any environment.

Bacterial biofilms on gold grains-implications for geomicrobial transformations of gold

The biogeochemical cycling of gold (Au), i.e. its solubilization, transport and re-precipitation, leading to the (trans)formation of Au grains and nuggets has been demonstrated under a range of environmental conditions. Biogenic (trans)formations of Au grains are driven by (geo)biochemical processes mediated by distinct biofilm consortia living on these grains. This review summarizes the current knowledge concerning the composition and functional capabilities of Au-grain communities, and identifies contributions of key-species involved in Au-cycling. To date, community data are available from grains collected at 10 sites in Australia, New Zealand and South America. The majority of detected operational taxonomic units detected belong to the α-, β- and γ-Proteobacteria and the Actinobacteria. A range of organisms appears to contribute predominantly to biofilm establishment and nutrient cycling, some affect the mobilization of Au via excretion of Au-complexing ligands, e.g. organic acids, thiosulfate and cyanide, while a range of resident Proteobacteria, especially Cupriavidus metallidurans and Delftia acidovorans, have developed Au-specific biochemical responses to deal with Au-toxicity and reductively precipitate mobile Au-complexes. This leads to the biomineralization of secondary Au and drives the environmental cycle of Au.

A quinoline-functionalized amphiphilic fluorogenic probe for specific detection of trivalent cations

A quinoline-functionalized amphiphilic fluorogenic probe was synthesized which selectively detects trivalent ions viz. Al³⁺, Fe³⁺, Cr³⁺, Ru³⁺ and Au³⁺ through a fluorescence turn on signal.