XAFS investigation of the structure of aqueous thorium(IV) species, colloids, and solid thorium(IV) oxide/hydroxide

Uranium hydroxide/oxide deposits on uranyl reduction

We clarified the chemical reaction of deposits following the reduction of uranyl ions (U^VIO₂²⁺) from the results of electrochemical quartz crystal microbalance, impedance spectra, and X-ray absorption fine structure measurements. We propose the following deposition mechanism: (1) U^IV is formed by the disproportionation of U^V, (2) U^IV forms U^IV hydroxide deposits, and (3) finally, the hydroxide deposits change to U^IV oxide, which generally have a larger electrical resistance than the hydroxide form.

Combined X-ray absorption and SEM-EDX spectroscopic analysis for the speciation of thorium in soil

Mobility and bioavailability of radionuclides in the environment strongly depend on their aqueous speciation, adsorption behavior and the solubility of relevant solid phases. In the present context, we focus on naturally occurring Th-232 at a location in central Sri Lanka presenting high background radiation levels. Four different soil samples were characterized using X-ray Absorption Spectroscopy (XAS) at the Th L₃-edge (16.3 keV), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) spectroscopy. X-ray Absorption Near Edge Structure (XANES) spectra are applied as a fingerprint indication for Th existing in different chemical environments. Linear combination fitting (LCF) of the Extended X-ray Absorption Fine Structure (EXAFS) data involving reference Th-monazite (phosphate) and thorianite (oxide) compounds suggested that Th is mostly present as Th-phosphate (76 ± 2%) and Th-oxide (24 ± 2%), even though minor amounts of thorite (silicate) were also detected by SEM-EDX. Further studies on selected individual particles using micro-focus X-ray Fluorescence (μ-XRF) and micro-X-ray Absorption Spectroscopy (μ-XAS) along with SEM-EDX elemental mapping provided information about the nature of Th-bearing mineral particles regarding mixed phases. This is the first study providing quantitative and XAS based speciation information on Th-mineral phases in soil samples from Sri Lanka.

Structural Approach to Understanding the Formation of Amorphous Metal Hydroxides

This study investigates the formation of amorphous tetravalent metal hydroxides, M(OH)₄, based on the structural analysis by small- and wide-angle X-ray scattering (SWAXS) and on the electrical potential charge near the surface of M(OH)₄ particles. The amorphous zirconium hydroxide solid phases that aged in NaCl and CaCl₂ solutions at 25 °C exhibited a hierarchical structure consisting of primary particles of a few nanometers in size and their aggregates more than 100 nm in size. The SWAXS profiles suggested that the size of the primary particles depends on the ionic strength and electrolytes in the sample solutions. The smaller size of the primary particles observed in solutions with higher ionic strength can be explained by the thinner electrical double layer. Additionally, we focused on the ζ potentials of M(OH)₄ suspensions in NaCl, NaNO₃, and CaCl₂ solutions. With the aid of reference systems of metal oxides, MO₂, it was found that the ζ potentials were well interpreted by a traditional surface ionization and complexation model, and the size distributions of large aggregates were explained by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory with the ζ potential values. The present study suggests the formation mechanism of amorphous metal hydroxides through a combination of structural analysis and investigation of electrical potentials.

Interlink between solubility, structure, surface and thermodynamics in the ThO2(s, hyd)–H2O(l) system

The impact of temperature on a freshly precipitated ThO2(am, hyd) solid phase was investigated using a combination of undersaturation solubility experiments and a multi-method approach for the characterization of the solid phase. XRD and EXAFS confirm that ageing of ThO2(am, hyd) at T = 80°C promotes a significant increase of the particle size and crystallinity. TG-DTA and XPS support that the ageing process is accompanied by an important decrease in the number of hydration waters/hydroxide groups in the original amorphous Th(IV) hydrous oxide. However, while clear differences between the structure of freshly precipitated ThO2(am, hyd) and aged samples were observed, the characterization methods used in this work are unable to resolve clear differences between solid phases aged for different time periods or at different pH values. Solubility experiments conducted at T = 22°C with fresh and aged Th(IV) solid phases show a systematic decrease in the solubility of the solid phases aged at T = 80°C. In contrast to the observations gained by solid phase characterization, the ageing time and ageing pH significantly affect the solubility measured at T = 22°C. These observations can be consistently explained considering a solubility control by the outermost surface of the ThO2(s, hyd) solid, which cannot be properly probed by any of the techniques considered in this work. Solubility data are used to derive the thermodynamic properties (log *K°s,0, ΔfG°m) of the investigated solid phases, and discussed in terms of particle size using the Schindler equation. These results provide new insights on the interlink between solubility, structure, surface and thermodynamics in the ThO2(s, hyd)–H2O(l) system, with special emphasis on the transformation of the amorphous hydrous/hydroxide solid phases into the thermodynamically stable crystalline oxides.

SAXS study of the formation and structure of polynuclear thorium(IV) colloids and thorium dioxide nanoparticles

Stable actinide colloids and nanoparticles are of interest because of their potential to affect the transportation of radionuclides in the near-field of a nuclear waste repository. At high concentrations, thorium(IV) can precipitate to form intrinsic colloids. In the present study, polynuclear thorium colloids and thorium dioxide crystallites, formed by the condensation of hydrolyzed Th⁴⁺ solutions (3 mM; initial pH 5.5) aged for up to 18 months, were studied using small-angle X-ray scattering. Scattering profiles were fitted using a unified Guinier/power-law model (Beaucage model) to extract the radii of gyration and Porod exponents. Analysis of the scattering profiles from a dispersion aged for 5 months indicated that both polymer coils and more compacted structures (radius of gyration R_g ≃ 10 nm) were present, which translated in the Kratky plots as a plateau and a peak maximum, respectively. After 18 months, the SAXS data were consistent with the presence of agglomerates of ThO₂ particles suspended in aqueous solution (pH 3.2; [Th] = 1.45 mM). The measured radius of gyration (R_g) of the agglomerates was 5.8 nm, whereas the radius of the ThO₂ particles was 2.5 nm.

Thorium(IV) adsorption onto multilayered Ti3C2Tx MXene: a batch, X-ray diffraction and EXAFS combined study

The interlayer regulation of layered environmental adsorption materials such as two-dimensional early transition metal carbides and carbonitrides (MXenes) plays an important role in their purification performance for specific pollutants. Here the enhanced uptake of Th^IV by multilayered titanium carbides (Ti₃C₂T_x) through a hydrated intercalation strategy is reported. Th^IV adsorption behaviors of three Ti₃C₂T_x samples with different c lattice parameters were studied as a function of contact time, pH, initial concentration, temperature and ion strength in batch experiments. The results indicated that the Th^IV uptake was pH and ionic strength dependent, and the adsorption process followed the pseudo-second-order kinetics and the heterogeneous isotherm (Freundlich) model. Thermodynamic data suggested that the adsorption process of all MXene samples was a spontaneous endothermic reaction. The dimethyl sulfoxide intercalated hydrated Ti₃C₂T_x featured the largest interlayer space and exhibited the highest Th^IV adsorption capacity (162 mg g^-1 at pH 3.4 or 112 mg g^-1 at pH 3.0), reflecting the significant increase in available adsorption sites from Ti₃C₂T_x interlayers. The adsorption mechanism has been clarified based on adsorption experiments and spectroscopic characterizations. An ion exchange process was proposed for the interaction between hydrated MXenes and Th^IV, where H⁺ from surface [Ti-O]^-H⁺ groups were the primary active sites on Ti₃C₂T_x. Extended X-ray absorption fine structure (EXAFS) fitting results, in combination with X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analyses, clearly indicated that Th^IV mainly formed the outer-sphere complexes on Ti₃C₂T_x surface through electrostatic interaction under strong acid conditions, while at pH > 3.0 the adsorption mechanism was determined by inner-sphere coordination and electrostatic interaction together.

Characterization of Thorium-Pyrazinoic acid complexation and its decorporation efficacy in human cells and blood

Thorium (Th) exposure to the human beings is a radiochemical hazard and the chelation therapy by suitable drugs is the major prevention approach to deal with. The present studies aimed at usage of pyrazinoic acid (PCA), which is a prodrug to treat tuberculosis, for its usage as decorporating agent for thorium from human body. The present studies provide a comprehensive knowledge on the chemical interaction and biological efficacy of pyrazinoic acid (PCA) for decorporation of Thorium from the human body. The thermodynamic parameters for Th-PCA speciation are determined by both experiment and theory. The potentiometric data analysis and Electro-Spray Ionization Mass Spectrometry (ESI-MS) studies revealed the formation of ML_i (i = 1-4) species with the decrease in stepwise stability constants. All the species formations are endothermic reactions and are predominantly entropy-driven. Biological experiments using human erythrocytes, whole blood and normal human lung cells showed cytocompatibility and decorporation ability of PCA for Thorium. Density functional calculations have been carried out to get insights on interaction process at molecular level. The experimental results and theoretical predictions found to be in line with each other. Present findings on complexation of Th by PCA and its evaluation in human cells and blood would further motivate determination of its safety levels and decorporation efficacy in animal models.

Accountancy for intrinsic colloids on thorium solubility: The fractionation of soluble species and the characterization of solubility limiting phase

The extensive hydrolysis of tetravalent actinides leads to polynuclear formations through oxygen bridging facilitating the formation of colloids as end products. The pH, ionic strength has phenomenal effects on Thorium colloids formation. The quantitative estimation of colloids facilitates the fraction of soluble fraction into ionic, polymeric and colloidal forms of thorium. The colloids accountability and precipitate characterization explains the discrepancies in estimated solubility limits. The supernatants of long equilibrated (∼3 years) saturated thorium solution under various pH (5- 11) and ionic strengths (0-3 M NaClO₄) were analysed by Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Ion Chromatography (IC) to determine total and ionic thorium respectively. Laser Induced Breakdown Detection (LIBD) was employed to determine the colloid size and concentrations. The precipitates were characterized by calorimetry and XRD to determine the solubility limiting phase. The results of pH, IC, ICP-MS, and LIBD measurements on the aged thorium samples are discussed with regard to the mechanism of the formation of thorium colloids. The results revealed the formation of colloids having particle size (10-40 nm) at concentrations (10⁹-10¹¹ particles/mL). The colloids accountancy resulted in estimated solubility products to 2-4 orders lower than their inclusion as soluble thorium. The soluble thorium was fractionated quantitatively into ionic, polymeric and colloidal forms of thorium. The precipitates formed are found to be semi amorphous.

The Application of HEXS and HERFD XANES for Accurate Structural Characterisation of Actinide Nanomaterials: The Case of ThO2

The structural characterisation of actinide nanoparticles (NPs) is of primary importance and hard to achieve, especially for non-homogeneous samples with NPs less than 3 nm. By combining high-energy X-ray scattering (HEXS) and high-energy-resolution fluorescence-detected X-ray absorption near-edge structure (HERFD XANES) analysis, we have characterised for the first time both the short- and medium-range order of ThO2 NPs obtained by chemical precipitation. By using this methodology, a novel insight into the structures of NPs at different stages of their formation has been achieved. The pair distribution function revealed a high concentration of ThO2 small units similar to thorium hexamer clusters mixed with 1 nm ThO2 NPs in the initial steps of formation. Drying the precipitates at around 150 °C promoted the recrystallisation of the smallest units into more thermodynamically stable ThO2 NPs. HERFD XANES analysis at the thorium M4 edge, a direct probe for f states, showed variations that we have correlated with the breakdown of the local symmetry around the thorium atoms, which most likely concerns surface atoms. Together, HEXS and HERFD XANES are a powerful methodology for investigating actinide NPs and their formation mechanism.

Structural properties of ultra-small thorium and uranium dioxide nanoparticles embedded in a covalent organic framework

We report the structural properties of ultra-small ThO2 and UO2 nanoparticles (NPs), which were synthesized without strong binding surface ligands by employing a covalent organic framework (COF-5) as an inert template. The resultant NPs were used to observe how structural properties are affected by decreasing grain size within bulk actinide oxides, which has implications for understanding the behavior of nuclear fuel materials. Through a comprehensive characterization strategy, we gain insight regarding how structure at the NP surface differs from the interior. Characterization using electron microscopy and small-angle X-ray scattering indicates that growth of the ThO2 and UO2 NPs was confined by the pores of the COF template, resulting in sub-3 nm particles. X-ray absorption fine structure spectroscopy results indicate that the NPs are best described as ThO2 and UO2 materials with unpassivated surfaces. The surface layers of these particles compensate for high surface energy by exhibiting a broader distribution of Th-O and U-O bond distances despite retaining average bond lengths that are characteristic of bulk ThO2 and UO2. The combined synthesis and physical characterization efforts provide a detailed picture of actinide oxide structure at the nanoscale, which remains highly underexplored compared to transition metal counterparts.

Probing the local structure of nanoscale actinide oxides: a comparison between PuO2 and ThO2 nanoparticles rules out PuO2+x hypothesis

Actinide research at the nanoscale is gaining fundamental interest due to environmental and industrial issues. The knowledge of the local structure and speciation of actinide nanoparticles, which possibly exhibit specific physico-chemical properties in comparison to bulk materials, would help in a better and reliable description of their behaviour and reactivity. Herein, the synthesis and relevant characterization of PuO₂ and ThO₂ nanoparticles displayed as dispersed colloids, nanopowders, or nanostructured oxide powders allow to establish a clear relationship between the size of the nanocrystals constituting these oxides and their corresponding An(iv) local structure investigated by EXAFS spectroscopy. Particularly, the first oxygen shell of the probed An(iv) evidences an analogous behaviour for both Pu and Th oxides. This observation suggests that the often observed and controversial splitting of the Pu-O shell on the Fourier transformed EXAFS signal of the PuO₂ samples is attributed to a local structural disorder driven by a nanoparticle surface effect rather than to the presence of PuO_2+x species.

Adsorption of Eu(III) and Th(IV) on three-dimensional graphene-based macrostructure studied by spectroscopic investigation

One of the most important reasons for the controversy over the development of nuclear energy is the proper disposal of spent fuel. Separation of actinide and lanthanide ions is an important part of safe long-term storage of radioactive waste. Herein, a three-dimensional (3D) graphene-based macrostructure (GOCS) was utilized to remove actinide thorium and lanthanide europium ions from aqueous solutions. The adsorption of Eu(III) and Th(IV) on the GOCS was evaluated as a function of adsorption time, solution pH, initial ion concentrations, and ionic strength. The experimentally determined maximum adsorption capacities of this GOCS for Eu(III) (pH 6.0) and Th(IV) (pH 3.0) are as high as 150 and 220 mg/g, respectively. By using Fourier transformation infrared (FT-IR), X-ray photoelectron (XPS), and extended X-ray absorption fine structure (EXAFS) spectroscopy, we concluded that the Eu(III) and Th(IV) adsorption was predominantly attributed to the inner-sphere coordination with various oxygen- and nitrogen-containing functional groups on GOCS surfaces. Our selective adsorption results demonstrate that the actinide and lanthanide ions can be effectively separated from transition metal ions. This study provides new clues to the overall recycling of actinide and lanthanide ions in radioactive environmental pollution treatments.

Density Functional Theory Investigations on the Mechanism of Formation of Pa(V) Ion in Hydrous Solutions

Due to the enormous threat of protactinium to the environment and human health, its disposal and chemistry have long been important topics in nuclear science. [PaO(H₂O)₆]3+ is proposed as the predominant species in hydrous and acidic solutions, but little is known about its formation mechanism. In this study, density functional theory (DFT) calculations demonstrate a water coordination-proton transfer-water dissociation mechanism for the formation of PaO3+ in hydrous solutions. First, Pa(V) ion preferentially forms hydrated complexes with a coordination number of 10. Through hydrogen bonding, water molecules in the second coordination sphere easily capture two protons on the same coordinated H₂O ligand to form [PaO(H₂O)₉]3+. Water dissociation then occurs to generate the final [PaO(H₂O)₆]3+, which is the thermodynamic product of Pa(V) in hydrous solutions.

Understanding the size effects on the electronic structure of ThO2 nanoparticles

High-resolution XANES spectra of small ThO₂ nanoparticles show the signature of the more exposed Th atoms at the surface.

Network-like arrangement of mixed-valence uranium oxide nanoparticles after glutathione-induced reduction of uranium(vi)

2–5 nm UO_2+x nanocrystals yielded under near-neutral conditions arrange as 20–40 nm chain-like building blocks, and finally form network-like aggregates.

Assessment of surface reactivity of thorium oxide in conditions close to chemical equilibrium by isotope exchange 229Th/232Th method

This work aims to assess the solubility and the surface reactivity of crystallized thorium at pH 3.0 in presence of three types of solids: synthesized powder at 1300°C, crushed kernel, and intact kernel. In this study, the kernel is composed by the core solid from high temperature reactors (HTR) sphere particles. The originality of this work consisted in following in a sequential order the kinetic of dissolution, the surface reactivity in presence of isotope tracer 229Th, and its desorption process. Long time experiments (634 days) allowed to get deeper understanding on the behavior of the surface reactivity in contact with the solution. Solubility values are ranging from 0.3×10−7 mol·L−1 to 3×10−7 mol·L−1 with a dissolution rate of 10−6–10−4 g·m−2 day−1. PHREEQC modeling showed that crystallized ThO2(cr, 20 nm) phase controls the equilibrium in solution. Isotope exchange between 229Th and 232Th indicated that well-crystallized phase exist as an inert surface regarding to the absence of exchange between surface solid and solution.

Computational study of Th(4+) and Np(4+) hydration and hydrolysis of Th(4+) from first principles

The aqueous solvation of Th and Np in the IV oxidation state was examined using cluster models generated by Monte Carlo simulations and density functional theory embedded within the COSMO continuum model to approximate the effect of bulk water. Our results suggest that the coordination number (CN) for both Th(IV) and NP(IV) should be 9, in accordance to some experimental and theoretical results from the literature. The structural values for average oxygen-metal distances are within 0.01 Å compared to experimental data, and also within the experimental error. The calculated ΔG _Sol⁰ are in very good agreement with experimental reported values, with deviations at CN = 9 lower than 1% for both Th(IV) and Np(IV). The hydrolysis constants are also in very good agreement with experimental values. Finally, this [corrected] methodology has the advantage of using a GGA functional (BP86) that not only makes the calculations more affordable computationally than hybrid functional or ab initio molecular dynamics simulations (Car-Parrinello) calculations, but also opens the perspective to use resolution of identity (RI) calculations for more extended systems.

NeptuniumV Retention by Siderite under Anoxic Conditions: Precipitation of NpO2-Like Nanoparticles and of NpIV Pentacarbonate

The Np^V retention by siderite, an Fe^II carbonate mineral with relevance for the near-field of high-level radioactive waste repositories, was investigated under anoxic conditions. Batch sorption experiments show that siderite has a high affinity for aqueous Np^VO₂⁺ across pH 7 to 13 as expressed by solid-water distribution coefficients, log R_d, > 5, similar to the log R_d determined for the (solely) tetravalent actinide Th on calcite, suggesting reduction of Np^V to Np^IV by siderite. Np L₃-edge X-ray absorption near edge (XANES) spectroscopy conducted in a pH range typical for siderite-containing host rocks (7-8), confirmed the tetravalent Np oxidation state. Extended X-ray absorption fine-structure (EXAFS) spectroscopy revealed a local structure in line with NpO₂-like nanoparticles with diameter < 1 nm, a result further corroborated by high-resolution transmission electron microscopy (HRTEM). The low solubility of these NpO₂-like nanoparticles (∼10^-9 M), along with their negligible surface charge at neutral pH conditions which favors particle aggregation, suggest an efficient retention of Np in the near-field of radioactive waste repositories. When Np^V was added to ferrous carbonate solution, the subsequent precipitation of siderite did not lead to a structural incorporation of Np^IV by siderite, but caused precipitation of a Np^IV pentacarbonate phase.

Development of separation technology for the removal of radium-223 from targeted thorium conjugate formulations. Part I: purification of decayed thorium-227 on cation exchange columns

Targeted thorium conjugates (TTCs) are being explored as a potential future platform for specific tumor targeting pharmaceuticals. In TTCs, the alpha emitting radionuclide thorium-227 (²²⁷Th) with a half-life of 18.697 d is labeled to targeting moieties, such as monoclonal antibodies (mAbs). The amount of daughter nuclide radium-223 (²²³Ra, t_1/2=11.435 d) will increase during manufacture and distribution, and so a technology for purification is required to assure an acceptable level of ²²³Ra is administrated to the patient. Since ²²³Ra is the only progeny of ²²⁷Th with a long half-life (days), the progenies of ²²³Ra will have a very limited stay in the formulation once ²²³Ra is removed. The focus in this study has, therefore, been on the removal of ²²³Ra. In this study, the sorption and separation of ²²³Ra (radium(II)) and ²²⁷Th (thorium(IV)) on cation exchange columns has been evaluated as a purification method of decayed ²²⁷Th (i.e. prior to radiolabelling of a mAb and formation of TTC). The goal is to minimize the sorption of ²²⁷Th and maximize the sorption of ²²³Ra. Statistical experimental design with formulation and process parameters, including buffered formulations comprising citrate and acetate, at various concentrations and pH, presence of free radical scavenger and chelator, and resin amount have been evaluated for impact on the purification process. The studies have been interpreted by the aid of multivariate data analysis. The correlations between design of experimental variables and sorption are summarized by regression models. The predictive accuracy of radionuclide sorption was given by standard deviation and 95% confidence intervals originating from statistical cross validation. Experimental results and statistical models for citrate-buffered formulations verified reproducible and acceptable sorption levels of ²²³Ra and ²²⁷Th under selected conditions. For acetate-buffered formulations, prediction of ²²⁷Th sorption was influenced by complex variable relationships and hence a risk of obtaining irreproducibility. Fine-tuned variable levels showed, however, variable combinations predicting high sorption of ²²³Ra (>90%) and low sorption of ²²⁷Th (<3%) also for the acetate-buffered formulations. The optimal separation conditions should be decided based on tuning the variables levels for ²²³Ra in the citrate-buffered formulations, while for acetate, the optimal separation should be based on tuning variable levels for ²²⁷Th sorption. The ionic strength of the formulation also seemed to affect the radionuclide sorption. Labeling of an antibody-chelator conjugate with purified ²²⁷Th (i.e. preparation of TTC) was successful in the selected citrate-buffered formulations tested.

Development of separation technology for the removal of radium-223 from decayed thorium-227 in drug formulations. Material screening and method development

Targeted thorium conjugates are currently being investigated as a new class of alpha-radiopharmaceuticals. The natural decay of thorium-227 ((227)Th) results in the ingrowth of radium-223 ((223)Ra). Consideration must, therefore, be given to define acceptable limits of (223)Ra in the drug product at the time of dose administration. By effective sequestration of (223)Ra, we aim to improve the radiochemical purity and extend the effective user window of drug products containing (227)Th. (223)Ra is the first progeny of (227)Th and the only one with a long half-life (days). We have, therefore, focused on the removal of this specific species since the progenies of (223)Ra will have a very limited lifetime in the formulation once (223)Ra is removed. In this study, we investigated a multitude of materials for their ability to reduce the (223)Ra level by: (1) passive diffusion or (2) by cartridge filtration on gravity columns. In addition, we probe the compatibility of these materials in the presence of antibody trastuzumab to assess the level of protein binding and estimate the quenching of radiolysis by binding of radionuclides. A screening matrix of organic and inorganic materials was established, i.e. strontium and calcium alginate gel beads, distearoyl phosphatidylglycerol (DSPG) liposomes, ceramic hydroxyapatite, Zeolite UOP type 4A and cation exchange resins AG50W-X8 and SOURCE 30S. First, passive diffusional uptake of (223)Ra by suspended materials present in the formulation was measured as a decrease in sample radioactivity after separation. Second, selected materials were packed on gravity columns in order to evaluate the efficiency of column separation versus diffusional adsorption. The retention of (223)Ra and (227)Th were characterized by measuring the radioactivity in the eluate and on the columns. Finally, the compatibility between trastuzumab, as a selected model antibody, and suspensions of the binding materials was analyzed during storage of the drug product in the presence of adsorbent. The formation of H2O2 was evaluated to measure the influence of radionuclide binding material on radiolysis in the formulation. All the materials bound (223)Ra by passive diffusional uptake ranging from 31% to 95% with DSPG liposomes demonstrating superiority at 95% efficiency. All materials suitable for assessment by gravity column filtration bound (223)Ra almost quantitatively (∼100%) and with minimal variation (relative standard deviation  <1%). The uptake was significantly higher compared to passive diffusional uptake. Alginate gel beads, ceramic hydroxyapatite and SOURCE 30S reduced the antibody concentration in solution to 40-50% while the Zeolite UOP type 4A, AG50W-X8 resin and DSPG liposomes showed ≤10% reduction of antibody concentration. Ceramic hydroxyapatite significantly reduced H2O2 formed by radionuclide initiated radiolysis.

Intrinsic formation of nanocrystalline neptunium dioxide under neutral aqueous conditions relevant to deep geological repositories

Simple dilution of an aqueous Np(iv) bicarbonate solution triggers the intrinsic formation of nanocrystalline neptunium dioxide (NpO₂). This new formation route could be a likely scenario in the repository and disposal of radioactive waste.

Exploring actinide materials through synchrotron radiation techniques

Synchrotron radiation (SR) based techniques have been utilized with increasing frequency in the past decade to explore the brilliant and challenging sciences of actinide-based materials. This trend is partially driven by the basic needs for multi-scale actinide speciation and bonding information and also the realistic needs for nuclear energy research. In this review, recent research progresses on actinide related materials by means of various SR techniques were selectively highlighted and summarized, with the emphasis on X-ray absorption spectroscopy, X-ray diffraction and scattering spectroscopy, which are powerful tools to characterize actinide materials. In addition, advanced SR techniques for exploring future advanced nuclear fuel cycles dealing with actinides are illustrated as well.

Synthesis and characterization of thorium, uranium and cerium oxide nanoparticles

We describe the synthesis of cerium, thorium and uranium oxide nanoparticles embedded in a mesoporous matrix as template in a kind of nanocasting technique. The solid matrix is used as a template to obtain and stabilize the actinide oxide nanoparticles. We apply high resolution transmission electron microscopy (HR-TEM) to show evidence of metal oxide incorporation into the matrix pores and analyze their structure. Measured interplanar distances and calculated lattice parameters for synthesized nanosized CeO2−x and ThO2 samples differ from their bulk crystalline counterparts. We obtain with our synthesis CeO2−x particles containing both Ce4+ and larger sized Ce3+. The lattice parameter for these ceria nanoparticles is found to be larger than the bulk value due to the presence of Ce3+ with its larger ionic radius. The presence of Ce3+ was established by means of high resolution X-ray emission spectroscopy (HRXES), applied to the investigation of nanoparticles for the first time. The ThO2 nanoparticles exhibit a decrease in interplanar distances, as one might generally expected for these nanoclusters. However, the lattice distance decrease for our particles is remarkable, up to 5%, indicating that contact with the surrounding silica matrix may exert a bond distance shortening effect such as through significant external pressure on the particle surface.

Submicron hard X-ray fluorescence imaging of synthetic elements

Synchrotron-based X-ray fluorescence microscopy (XFM) using hard X-rays focused into sub-micron spots is a powerful technique for elemental quantification and mapping, as well as microspectroscopic measurements such as μ-XANES (X-ray absorption near edge structure). We have used XFM to image and simultaneously quantify the transuranic element plutonium at the L(3) or L(2)-edge as well as Th and lighter biologically essential elements in individual rat pheochromocytoma (PC12) cells after exposure to the long-lived plutonium isotope (242)Pu. Elemental maps demonstrate that plutonium localizes principally in the cytoplasm of the cells and avoids the cell nucleus, which is marked by the highest concentrations of phosphorus and zinc, under the conditions of our experiments. The minimum detection limit under typical acquisition conditions with an incident X-ray energy of 18 keV for an average 202 μm(2) cell is 1.4 fg Pu or 2.9×10(-20) moles Pu μm(-2), which is similar to the detection limit of K-edge XFM of transition metals at 10 keV. Copper electron microscopy grids were used to avoid interference from gold X-ray emissions, but traces of strontium present in naturally occurring calcium can still interfere with plutonium detection using its L(α) X-ray emission.

Studying Actinide Correlations in Solution using High-Energy X-ray Scattering

High energy x-ray scattering (HEXS) is becoming a valuable tool for quantifying actinide coordination environments in solution. The technique is described with and exemplified by a study on Th speciation. A comparison of data from two samples with pHs of 0 and 3.4 show differences in the Th structural environment that can be attributed to Th colloid formation at the higher pH. A further comparison of the HEXS data from the colloidal sample with Th L3-edge EXAFS data on the same sample clearly demonstrates the advantage of the scattering data when looking for correlations at second-near neighbor or longer distances.

Discrepancies in thorium oxide solubility values: study of attachment/detachment processes at the solid/solution interface

The solubility of thorium under oxide and/or hydroxide forms has been extensively studied for many years. Nevertheless, a large discrepancy in the solubility values is noticed in the literature. We study Th atom exchange between thorium oxide surfaces and various aqueous solutions (0.01 mol·L(-1) NaCl for 0.0 < pH < 5.2) to address this issue. By solid-state characterization [X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and atomic force microscopy], we determined that 80% of the XPS accessible near the surface region of sintered thorium oxide is represented by the less reactive ThO(2)(cr) grains. The remaining 20% corresponds to ThO(x)(OH)(y)(H(2)O)(z), which is largely associated with grain boundaries. Only the latter fraction is involved in solid/solution exchange mechanisms. Local conditions (thorium concentrations, pH values, etc.) in grain boundaries lead to an adjustment of the "local solubility constraints" and explain the thorium concentration measured in our experiments. For pH <5.2, the thorium concentration and pH gradient between the bulk solution and grain-boundary regions imply that the solubility values mainly depend on the availability and accessibility of ThO(x)(OH)(y)(H(2)O)(z). We have performed two solubility experiments with a (232)ThO(2)(cr) solid in a 0.01 mol·L(-1) NaCl solution for 300 days. In a first experiment, we measured (232)Th concentrations in dissolution experiments in order to determine the detachment rates of Th atoms from the solid surface. In a subsequent step, we added (229)Th to the solution in order to measure the surface attachment rate for dissolved Th atoms. This allowed an assessment of the net balance of Th atom exchange at the solid/solution interface. The empirical solubility data do not correspond to the thermodynamic bulk phase/solution equilibrium because measured solution concentrations are controlled by site-specific exchange mechanisms at the solid/solution interface. Therefore, for sparingly soluble solids, one needs to quantify site-specific surface attachment and detachment rates if one wants to assess solubility constraints.