Unexpected Formation of Chiral Pincer CNN Nickel Complexes with β-Diketiminato Type Ligands via C–H Activation: Synthesis, Properties, Structures, and Computational Studies

Anilido-Oxazoline-Ligated Iron Alkoxide Complexes for Living Ring-Opening Polymerization of Cyclic Esters with Controllability

Anilido-oxazoline-ligated iron complexes, including bis(anilido-oxazolinate) iron(II), mononuclear iron(II) alkyl and aryloxide, as well as the dinuclear analogues, were synthesized, and their catalytic performance on ring-opening polymerization (ROP) has been studied. Transmetalation of FeCl2(THF)1.5 with in situ-generated anilido-oxazolinate lithium afforded the bis(anilido-oxazolinate) iron complexes 1 and 2. Half-sandwich anilido-oxazolinate iron trimethylsilylalkyl complexes 3 and 4 could be synthesized in good yields via taking pyridine as an L-type ligand. Treatment of 3 with benzyl alcohol and 4-phenoxyphenol, respectively, generated the dimeric alkoxide or aryloxide complexes 5 and 6, whereas the reaction with 2,4,6-trimethylphenol and 2,6-di-tert-butyl-4-methylphenol yielded the mononuclear aryloxide complexes 7 and 8, respectively. The iron alkoxide and aryloxide complexes were active single component catalysts for the ROP of ε-caprolactone (CL). Remarkably, the dinuclear complex 5 exhibited excellent controllability, livingness, and high initiation efficiency for ROP of CL. ROP of CL derivatives by 5 produced the corresponding polycyclic esters with good controllability, and the well-defined block copolymers could be generated by sequentially feeding different monomers. The chain initiation and propagation processes were investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and kinetics analysis. In addition, a computational study was conducted to rationalize the mechanism and synergistic effect of the alkoxide-bridged bimetallic iron centers.

Synthesis, characterisation and reactivity studies of chiral β-diketiminate-like supported aluminium Lewis acid complexes towards difficult Diels Alder cycloadditions

Synthesis and characterisation of several chiral, oxazoline containing β-diketiminate type ligand supported-aluminium compounds are reported. Together with 1 equiv. of Na(BAr^Cl₄) (Ar^Cl = 3,5-Cl₂-C₆H₃), these chiral Lewis acid complexes, which possess an "achiral end" and "chiral end" have been successfully utilised as catalysts in asymmetric Diels-Alder reactions of 1,3-cyclohexadiene and several different chalcones. Systematic increase in the steric demand of the ligand's "achiral end" of these complexes resulted in enhanced enantioinduction for the cyclisation of 1,3-cyclohexadiene and chalcone. Further structural modifications of the "chiral end" clearly established that having a tert-butyl group connected to the stereogenic centre of the oxazoline fragment yielded the highest enantioselectivity value for the examined cyclisation. A substrate scope was then expanded using several different dienophiles (i.e. chalcones) generating an enantiomeric excess range of 24-68%.

Selective benzylic Csp3-H bond activations mediated by a phosphorus-nitrogen PN3P-nickel complex

In contrast to the typical C_sp2-H activation, a PN³P-Nickel complex chemoselectively cleaved the benzylic C_sp3-H bond of toluene in the presence of KHMDS, presumably via an in situ generated potassium benzyl intermediate. Under similar conditions, CO underwent deoxygenation to afford the corresponding nickel cyano complex, and ethylbenzene was dehydrogenated to give styrene and a nickel hydride compound. 2,6-Xylyl isocyanide was transformed into an unprecedented indolyl complex, likely by trapping the activated benzyl species with an isocyanide moiety.

A serendipitous self-assembly synthesis of CNN–Pt pincer complexes

A serendipitous one pot self-assembly synthesis of hydride CNN–Pt(iv) pincer complexes was achieved, which involves a formal C–H bond activation, with an earlier C–N bond formation via C–Br bond excision, instead of the expected rollover complex.

Synthesis and crystal structures of tetra-meric [2-(4,4-dimethyl-2-oxazolin-2-yl)anilido]sodium and tris-[2-(4,4-dimethyl-2-oxazolin-2-yl)anilido]ytterbium(III)

Reaction of 2-(4,4-dimethyl-2-oxazolin-2-yl)aniline (H2-L1) with one equivalent of Na[N(SiMe3)2] in toluene afforded pale-yellow crystals of tetra-meric poly[bis-[μ3-2-(4,4-dimethyl-2-oxazolin-2-yl)anilinido][μ2-2-(4,4-dimethyl-2-oxa-zolin-2-yl)aniline]tetra-sodium(I)], [Na4(C11H13N2O)4] n or [Na4(H-L1)4] n (2), in excellent yield. Subsequent reaction of [Na4(H-L1)4] n (2) with 1.33 equivalents of anhydrous YbCl3 in a 50:50 mixture of toluene-THF afforded yellow crystals of tris-[2-(4,4-dimethyl-2-oxazolin-2-yl)anilinido]ytterbium(III), [Yb(C11H13N2O)3] or Yb(H-L1)3 (3) in moderate yield. Direct reaction of three equivalents of 2-(4',4'-dimethyl-2'-oxazolin-yl)aniline (H2-L1) with Yb[N(SiMe3)2]3 in toluene resulted in elimination of hexa-methyl-disilazane, HN(SiMe3)2, and produced Yb(H-L1)3 (3) in excellent yield. The structure of 2 consists of tetra-meric Na4(H-L1)4 subunits in which each Na+ cation is bound to two H-L1 bridging bidentate ligands and these subunits are connected into a polymeric chain by two of the four oxazoline O atoms bridging to Na+ cations in the adjacent tetra-mer. This results in two 4-coordinate and two 5-coordinate Na+ cations within each tetra-meric unit. The structure of 3 consists of a distorted octa-hedron where the bite angle of ligand L1 ranges between 74.72 (11) and 77.79 (11) degrees. The oxazoline (and anilide) N atoms occupy meridional sites such that for one ligand an anilide nitro-gen is trans to an oxazoline nitro-gen while for the other two oxazoline N atoms are trans to each other. This results in a significantly longer Yb-N(oxazoline) distance [2.468 (3) Å] for the bond trans to the anilide compared to those for the oxazoline N atoms trans to one another [2.376 (3), 2.390 (3) Å].

Synthesis and application in asymmetric catalysis of P-stereogenic pincer–metal complexes

P-stereogenic pincer: synthesis and application in asymmetric catalysis.

Anilido-oxazoline-ligated rare-earth metal complexes: synthesis, characterization and highly cis-1,4-selective polymerization of isoprene

Anilido-oxazoline-ligated rare-earth metal dialkyl complexes have been synthesized and structurally characterized. The complexes exhibited strong fluorescence emissions and good catalytic performance on isoprene polymerization with high cis-1,4-selectivity. The treatment of anilido-oxazoline precursors ortho-C6H4[NH(2,6-R12C6H3)][C[double bond, length as m-dash]NC(R2,R3)CH2O] (R1 = R2 = R3 = Me (HL1); R1 = iPr, R2 = R3 = Me (HL2); R1 = R2 = iPr, R3 = H (HL3); and R1 = iPr, R2 = R3 = H (HL4)) with an equimolar amount of Ln(CH2SiMe3)3(THF)2 (Ln = Sc, Y) afforded rare-earth metal complexes L1-4-Ln(CH2SiMe3)2(THF)n (L1-Sc (1), n = 1; L2-Sc (2), n = 0; L1-Y (3), n = 1; L2-Y (4), n = 1; L3-Y (5), n = 1; and L4-Y (6), n = 1) in good yields. The complexes are stable in both the solid state and solution. Single crystal X-ray diffraction study showed that complexes 1, 3 and 4 exhibit a distorted trigonal bipyramidal configuration, while complex 2 is pseudo-tetrahedral without coordinated THF. The luminescence properties of complexes 1-4 were investigated and the emission maxima were found in the range of 465-477 nm. DFT and TD-DFT studies were carried out to explore their characteristic electronic structures and gain insight into their optical properties. Upon activation with organic borates, the reported complexes exhibited high activity and cis-1,4-selectivity for isoprene polymerization. The nature of the central metal and substituent groups in oxazoline have an influence on the cis-1,4-selectivity.

Zinc-Catalyzed Highly Isoselective Ring Opening Polymerization of rac-Lactide

A family of chiral zinc amido-oxazolinate complexes are shown to be highly active and isoselective initiators for the ring-opening polymerization (ROP) of rac-lactide, yielding isotactic stereoblock polylactides (PLA) with P_m up to 0.91. This represents the highest isoselectivity observed with zinc-based catalysts for ROP of rac-lactide.

Ring-Opening Polymerization of rac-Lactide with Aluminum Chiral Anilido-Oxazolinate Complexes

A series of dimethylaluminum complexes (L^1a–i)AlMe₂ (2a–i, where HL^1a–i = 2-(2′-ArNH)phenyl-4-R₁-oxazoline) bearing chiral, bidentate anilido-oxazolinate ligands have been prepared and characterized. Six of the complexes, in the presence of an alcohol cocatalyst, are shown to be active initiators for the stereoselective ring-opening polymerization of rac-lactide in toluene solution and under bulk conditions, yielding polylactides with a range of tacticity from slightly isotactic to moderately heterotactic. The reactivity and selectivity of these catalysts are discussed on the basis of the effect of their substituents.