New Syntheses and Structural Characterization of NH3BH2Cl and (BH2NH2)3 and Thermal Decomposition Behavior of NH3BH2Cl

Borylation directed borylation of N-alkyl anilines using iodine activated pyrazaboles

Doubly electrophilic pyrazabole derivatives (pyrazabole = [H2B(μ-C3N2H3)]2) combined with one equiv. of base effect the ortho-borylation of N-alkyl anilines. Initial studies found that the bis(trifluoromethane)sulfonimide ([NTf2]-) pyrazabole derivative, [H(NTf2)B(μ-C3N2H3)]2, is highly effective for ortho-borylation, with this process proceeding through N-H borylation and then ortho C-H borylation. The activation of pyrazabole by I2 was developed as a cheaper and simpler alternative to using HNTf2 as the activator. The addition of I2 forms mono or ditopic pyrazabole electrophiles dependent on stoichiometry. The ditopic electrophile [H(I)B(μ-C3N2H3)]2 was also effective for the ortho-borylation of N-alkyl-anilines, with the primary C-H borylation products readily transformed into pinacol boronate esters (BPin) derivatives. Comparison of borylation reactions using the di-NTf2-and the diiodo-pyrazabole congeners revealed that more forcing conditions are required with the latter. Furthermore, the presence of iodide leads to competitive formation of side products, including [HB(μ-C3N2H3)3BH]+, which are not active for C-H borylation. Using [H(I)B(μ-C3N2H3)]2 and 0.2 equiv. of [Et3NH][NTf2] combines the higher yields of the NTf2 system with the ease of handling and lower cost of the iodide system generating an attractive process applicable to a range of N-alkyl-anilines. This methodology represents a metal free and transiently directed C-H borylation approach to form N-alkyl-2-BPin-aniline derivatives.

Production of Dihydrogen Using Ammonia Borane as Reagent and Pyrazole as Catalyst

Theoretical chemistry (DLPNO-CCSD(T)/def2-TZVP//M06-2x/aug-cc-pVDZ) was used to design a system based on ammonia boranes catalyzed by pyrazoles with the aim of producing dihydrogen, nowadays of high interest as clean fuel. The reactivity of ammonia borane and cyclotriborazane were investigated, including catalytic activation through 1H-pyrazole, 4-methoxy-1H-pyrazole, and 4-nitro-1H-pyrazole. The results point toward a catalytic cycle by which, at the same time, ammonia borane can initially store and then, through catalysis, produce dihydrogen and amino borane. Subsequently, amino borane can trimerize to form cyclotriborazane that, in presence of the same catalyst, can also produce dihydrogen. This study proposes therefore a consistent progress in using environmentally sustainable (metal free) catalysts to efficiently extract dihydrogen from small B-N bonded molecules.

Synthesis, Formation Mechanism, and Structure of K[BH3S(CH3)BH3] and Its Application in Preparation of KB3H8

The design, synthesis, and applications of new boranes are eternal topics in boron chemistry. A new bis(borane)alkanethiolate salt, K[BH₃S(CH₃)BH₃], was synthesized in high yield by the reaction of K with (CH₃)₂S·BH₃ at room temperature. The formation mechanism was elucidated based on experimental and theoretical studies. The single-crystal structure of the K[BH₃S(CH₃)BH₃]·18-crown-6 adduct was determined in which the B-S-B bonding information of K[BH₃S(CH₃)BH₃] was illustrated for the first time. Using K[BH₃S(CH₃)BH₃] as a starting material, KB₃H₈ was successfully synthesized.

Defect-Regulated Frustrated-Lewis-Pair Behavior of Boron Nitride in Ambient Pressure Hydrogen Activation

The construction of heterogeneous frustrated Lewis pairs (FLPs) with performance comparable to or surpassing the homogeneous counterparts in H₂ activation is a long-standing challenge. Herein, sterically hindered Lewis acid ("B" center) and Lewis base ("N" center) sites were anchored within the rigid lattice of highly crystalline hexagonal boron nitride (h-BN) scaffolds. The active sites were created via precision defect regulation during the molten-salt-involved (NaNH₂ and NaBH₄) h-BN construction procedure. The as-afforded h-BN scaffolds achieved highly efficient H₂/D₂ activation and dissociation under ambient pressure via FLP-like behavior, and attractive catalytic efficiency in hydrogenation reactions surpassing the current heterogeneous analogues.

Reactivity and mechanisms of hydridic hydrogen of B–H in ammonia borane towards acetic acids: the ammonia B-monoacyloxy boranes

B-monoacyloxy boranes are first obtained by moderate reactions of ammonia borane with acetic acids.

A general method for the synthesis of covalent and ionic amine borane complexes containing trinitromethyl fragments

A general approach for the synthesis of covalent and ionic amine borane complexes containing trinitromethyl fragments has been developed through metathesis reactions between amine chloroborane complexes and potassium salt of trinitromethyl (K[C(NO₂)₃]). Five covalent and ionic trinitromethyl amine borane complexes have been synthesized in good yields with high purity and it is found that the ionic complex, [H₂B(NH₃)₂][C(NO₂)₃], might be a promising energetic material on the basis of the investigation of its thermal decomposition behaviour.

A general approach has been developed through which five covalent and ionic amine borane complexes containing trinitromethyl fragments were synthesized.

Dehydrogenation of Amine-Boranes Using p-Block Compounds

Amine-boranes have gained a lot of attention due to their potential as hydrogen storage materials and their capacity to act as precursors for transfer hydrogenation. Therefore, a lot of effort has gone into the development of suitable transition- and main-group metal catalysts for the dehydrogenation of amine-boranes. During the past decade, new systems started to emerge solely based on p-block elements that promote the dehydrogenation of amine-boranes through hydrogen-transfer reactions, polymerization initiation, and main-group catalysis. In this review, we highlight the development of these p-block based systems for stoichiometric and catalytic amine-borane dehydrogenation and discuss the underlying mechanisms.

Impact of dihydrogen bonding on lattice energies and sublimation enthalpies of crystalline [H2GaNH2]3, [H2BNH2]3 and [H2GeCH2]3

Calculated lattice energies and sublimation enthalpies provide quantitative measures of the importance of intermolecular dihydrogen bonds.

Use of crown ethers to isolate intermediates in ammonia-borane dehydrocoupling reactions

The presence of 18-crown-6 in the Lewis acid-promoted dehydrocoupling reaction of ammonia borane permits isolation of [(THF)BH₂NH₃]⁺ cation.

Generation of aminoborane monomers RR'N=BH2 from amine-boronium cations [RR'NH-BH2L](+): metal catalyst-free formation of polyaminoboranes at ambient temperature

Protonation of MeRNH·BH3 (R = Me or H) with HX (X = B(C6F5)4, OTf, or Cl), followed by immediate, spontaneous H2 elimination, yielded the amine-boronium cation salt [MeRNH·BH2(OEt2)][B(C6F5)4] and related polar covalent analogs, MeRNH·BH2X (X = OTf or Cl). These species can be deprotonated to conveniently generate reactive aminoborane monomers MeRN=BH2 which oligomerize or polymerize; in the case of MeNH2·BH3, the two step process gave poly(N-methylaminoborane), [MeNH-BH2]n.

Probing the second dehydrogenation step in ammonia-borane dehydrocoupling: characterization and reactivity of the key intermediate, B-(cyclotriborazanyl)amine-borane

While thermolysis of ammonia-borane (AB) affords a mixture of aminoborane- and iminoborane oligomers, the most selective metal-based catalysts afford exclusively cyclic iminoborane trimer (borazine) and its B-N cross-linked oligomers (polyborazylene). This catalysed dehydrogenation sequence proceeds through a branched cyclic aminoborane oligomer assigned previously as trimeric B-(cyclodiborazanyl)amine-borane (BCDB). Herein we utilize multinuclear NMR spectroscopy and X-ray crystallography to show instead that this key intermediate is actually tetrameric B-(cyclotriborazanyl)amine-borane (BCTB) and a method is presented for its selective synthesis from AB. The reactivity of BCTB upon thermal treatment as well as catalytic dehydrogenation is studied and discussed with regard to facilitating the second dehydrogenation step in AB dehydrocoupling.

The roles of dihydrogen bonds in amine borane chemistry

A dihydrogen bond (DHB) is an electrostatic interaction between a protonic hydrogen and a hydridic hydrogen. Over the past two decades, researchers have made significant progress in the identification and characterization of DHBs and their properties. In comparison with conventional hydrogen bonds (HBs), which have been widely used in catalysis, molecular recognition, crystal engineering, and supramolecular synthesis, chemists have only applied DHBs in very limited ways. Considering that DHBs and conventional HBs have comparable strength, DHBs could be more widely applied in chemistry. Over the past several years, we have explored the impact of DHBs on amine borane chemistry and the syntheses and characterization of amine boranes and ammoniated metal borohydrides for hydrogen storage. Through systematic computational and experimental investigations, we found that DHBs play a dominant role in dictating the reaction pathways (and thus different products) of amine boranes where oppositely charged hydrogens coexist for DHB formation. Through careful experiments, we observed, for the first time, a long-postulated reaction intermediate, ammonia diborane (AaDB), whose behavior is essential to mechanistic understanding of the formation of the diammoniate of diborane (DADB) in the reaction of ammonia (NH3) with tetrahydrofuran borane (THF·BH3). The formation of DADB has puzzled the boron chemistry community for decades. Mechanistic insight enabled us to develop facile syntheses of aminodiborane (ADB), ammonia borane (AB), DADB, and an inorganic butane analog NH3BH2NH2BH3 (DDAB). Our examples, together with those in the literature, reinforce the fact that DHB formation and subsequent molecular hydrogen elimination are a viable approach for creating new covalent bonds and synthesizing new materials. We also review the strong effects of DHBs on the stability of conformers and the hydrogen desorption temperatures of boron-nitrogen compounds. We hope that this Account will encourage further applications of DHBs in molecular recognition, host-guest chemistry, crystal engineering, supramolecular chemistry, molecular self-assembly, chemical kinetics, and the syntheses of new advanced materials.