Optimization of Polyacrylonitrile-2-aminothiazole Resin Synthesis, Characterization, and Its Adsorption Performance and Mechanism for Removal of Hg(II) from Aqueous Solutions

Surface activity, mechanisms, kinetics, and thermodynamic study of adsorption of malachite green dye onto sulfuric acid-functionalized Moringa oleifera leaves from aqueous solution

In the present study, activated carbon prepared from H2SO4-functionalized Moringa oleifera leaves (ACMOL) was used as a potential adsorbent for the effective removal of malachite green (MG) dye from aqueous media. FT-IR, SEM, EDS, Zeta potential, XRD, BET, proximate, and CHNS analysis techniques were used for surface characterization of the ACMOL. The adsorption efficiency of the ACMOL was investigated as a function of varying adsorbent dosage (0.02-0.2 g/100 mL), pH (3.0-9.0), ionic strength (0.1-0.5 M KCl), urea concentration (0.1-0.5 M), contact time (30-210 min), and temperature (303-323 K). The representative adsorption isotherms belong to the typical L-type. Maximum percentage removal was found to be 84% (124.40 mg/g) for MG dye concentration (30 mg/L) at pH 7.0 and 303 K with ACMOL dose 0.02 g/100 mL. The adsorption kinetics and equilibrium experimental data of MG dye adsorption on the ACMOL were well explained by the pseudo-second-order kinetics (R2 = 0.99) and Langmuir isotherm model (R2 = 0.99), respectively. The value of adsorption and desorption coefficient was found to be 0.036 min-1 and 0.025 mg min-1/L, respectively. Thermodynamic study showed the spontaneous (ΔG° =  - 31.33, - 31.92, and - 32.49 kJ/mol at temperatures 303 K, 313 K, and 323 K, respectively) and exothermic (ΔH° =  - 13.7 kJ/mol) nature of the adsorption with some structural changes occurring on the ACMOL surface (ΔS° = 58.198 J/K·mol).

Insights into the Synergistic Removal of Copper(II), Cadmium(II), and Chromium(III) Ions Using Modified Chitosan Based on Schiff Bases-g-poly(acrylonitrile)

Chitosan has received broad consideration as an adsorbent for all pollutants because of its low cost and great adsorption potential. However, its shortcomings, including sensitivity to pH, poor thermal stability, and poor mechanical strength, limit its use. The functional groups of chitosan can be modified to enhance its performance by the grafting technique and Schiff base modification. The grafting process used acrylonitrile (Ch-g-PAN) as a monomer and potassium persulfate as an initiator. After that, the modification via preparation of the Schiff base reaction using salicylaldehyde (Ch-g-Sch I) and P-anisaldehyde (Ch-g-Sch II) was carried out. The synthesized copolymers were detailed and characterized through several spectroscopic and microscopic techniques including infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. In addition, Ch-g-Sch I and Ch-g-Sch II were applied in the removal of different metal ions such as Cu²⁺, Cd²⁺, and Cr³⁺. The maximum adsorption capacity of Ch-g-Sch I for Cd²⁺ was 183.7 mg g^-1 in 24 h, while in the case of Ch-g-Sch II, the maximum adsorption capacity for Cd²⁺ was improved to 322.9 mg g^-1 for the same time. Moreover, adsorption thermodynamic analysis displays that the all ion adsorption process was not random and the pseudo-second-order model fitted with experimental results. Finally, Ch-g-Sch I and Ch-g-Sch II were applied as designs for industrial wastewater treatment with significant efficiency.

Adsorption of Different Pollutants by Using Microplastic with Different Influencing Factors and Mechanisms in Wastewater: A Review

The studies on microplastics are significant in the world. According to the literature, microplastics have greatly specific surface areas, indicating high adsorption capacities for highly toxic pollutants in aquatic and soil environments, and these could be used as adsorbents. The influencing factors of microplastic adsorption, classification of microplastics, and adsorption mechanisms using microplastics for adsorbing organic, inorganic, and mixed pollutants are summarized in the paper. Furthermore, the influence of pH, temperature, functional groups, aging, and other factors related to the adsorption performances of plastics are discussed in detail. We found that microplastics have greater advantages in efficient adsorption performance and cost-effectiveness. In this paper, the adsorptions of pollutants by microplastics and their performance is proposed, which provides significant guidance for future research in this field.

A Novel Coordination Polymer as Adsorbent Used to Remove Hg(II) and Pb(II) from Water with Different Adsorption Mechanisms

Under the hydrothermal condition, a new type of two-dimensional coordination polymer ([Cd(D-Cam)(3-bpdb)]_n, Cd-CP) has been constructed. It is composed of D-(+)-Camphoric-Cd(II) (D-cam-Cd(II)) one-dimensional chain and bridging 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene (3-bpdb) ligands. Cd-CP has a good removal effect for Hg(II) and Pb(II), and the maximum adsorption capacity is 545 and 450 mg/g, respectively. Interestingly, thermodynamic studies have shown that the adsorption processes of Hg(II) and Pb(II) on Cd-CP use completely different thermodynamic mechanisms, in which the adsorption of Hg(II) is due to a strong electrostatic interaction with Cd-CP, while that of Pb(II) is through a weak coordination with Cd-CP. Moreover, Cd-CP has a higher affinity for Hg(II), and when Hg(II) and Pb(II) coexist, Cd-CP preferentially adsorbs Hg(II).

Efficient removal of heavy metals from polluted water with high selectivity for Hg(ii) and Pb(ii) by a 2-imino-4-thiobiuret chemically modified MIL-125 metal-organic framework

A highly porous adsorbent based on a metal-organic framework was successfully designed and applied as an innovative adsorbent in the solid phase for the heavy metal removal. MIL-125 was densely decorated by 2-imino-4-thiobiuret functional groups, which generated a green, rapid, and efficacious adsorbent for the uptake of Hg(ii) and Pb(ii) from aqueous solutions. ITB-MIL-125 showed a high adsorption affinity toward mercury(ii) ions of 946.0 mg g-1 due to covalent bond formation with accessible sulfur-based functionality. Different factors were studied, such as the initial concentration, pH, contact time, and competitive ions, under same circumstances at the room temperature. Moreover, the experimental adsorption data were in excellent agreement with the Langmuir adsorption isotherm and pseudo-second order kinetics. At a high concentration of 100 ppm mixture of six metals, ITB-MIL-125 exhibited a high adsorption capacity, reaching more than 82% of Hg(ii) compared to 62%, 30%, 2%, 1.9%, and 1.6% for Pb(ii), Cu(ii), Cd(ii), Ni(ii), and Zn(ii), respectively.

Preparation of Humic Acid/l-Cysteine-Codecorated Magnetic Fe3O4 Nanoparticles for Selective and Highly Efficient Adsorption of Mercury

Humic acid and l-cysteine-codecorated magnetic Fe3O4 nanoparticles (HA/LC-MNPs) were synthesized using a coprecipitation method. Humic acid fractions abundant with carboxyl and hydroxyl groups can be selectively coated on the surface of MNPs during synthesis. HA/LC-MNPs with abundant heteroatoms (N, S, and O) show excellent removal capacity, great selectivity, and also fast trapping of Hg2+ in a wide pH range. The adsorption capacity of HA/LC-MNPs for Hg2+ can reach 206.5 mg/g, and the chemisorption was attributed to the major adsorption form. In competitive adsorption, HA/LC-MNPs preferentially adsorbed Hg2+ with an affinity order of Hg2+ > > Pb2+ > Cu2+ ≫ Zn2+ > Cd2+. In total, 93.91% of Hg2+ can be quickly captured in the presence of a 6000 times higher concentration of competing metal ions (Pb2+, Cu2+, Cd2+, and Zn2+) within 30 min. The adsorption mechanism was analyzed using X-ray photoelectron spectroscopy (XPS). It suggested that the HA/LC-MNPs enhanced the adsorption capacity of Hg2+ because of the complexing abilities of the multiple thiol, amino, and carboxyl groups in sorbents with Hg2+, the ion exchange ability of the carboxyl group, and the negative charge surface. All in all, HA/LC-MNPs are a potentially useful and economic material for the selective removal of Hg2+ from polluted water.

Porous BMTTPA-CS-GO nanocomposite for the efficient removal of heavy metal ions from aqueous solutions

In this study, a stable, cost-effective and environmentally friendly porous 2,5-bis(methylthio)terephthalaldehyde–chitosan–grafted graphene oxide (BMTTPA–CS–GO) nanocomposite was synthesized by covalently grafting BMTTPA–CS onto the surfaces of graphene oxide and used for removing heavy metal ions from polluted water. According to well-established Hg²⁺–thioether coordination chemistry, the newly designed covalently linked stable porous BMTTPA–CS–GO nanocomposite with thioether units on the pore walls greatly increases the adsorption capacity of Hg²⁺ and does not cause secondary pollution to the environment. The results of sorption experiments and inductively coupled plasma mass spectrometry measurements demonstrate that the maximum adsorption capacity of Hg²⁺ on BMTTPA–CS–GO at pH 7 is 306.8 mg g⁻¹, indicating that BMTTPA–CS–GO has excellent adsorption performance for Hg²⁺. The experimental results show that this stable, environmentally friendly, cost-effective and excellent adsorption performance of BMTTPA–CS–GO makes it a potential nanocomposite for removing Hg²⁺ and other heavy metal ions from polluted water, and even drinking water. This study suggests that covalently linked crucial groups on the surface of carbon-based materials are essential for improving the adsorption capacity of adsorbents for heavy metal ions.

Novel porous BMTTPA–CS–GO nanocomposites are prepared by covalently grafting BMTTPA–CS onto GO surfaces, and used for efficient removal of heavy metal ions from polluted water.

Emerging technologies for the recovery of rare earth elements (REEs) from the end-of-life electronic wastes: a review on progress, challenges, and perspectives

The demand for rare earth elements (REEs) has significantly increased due to their indispensable uses in integrated circuits of modern technology. However, due to the extensive use of high-tech applications in our daily life and the depletion of their primary ores, REE's recovery from secondary sources is today needed. REEs have now attracted attention to policymakers and scientists to develop novel recovery technologies for materials' supply sustainability. This paper summarizes the recent progress for the recovery of REEs using various emerging technologies such as bioleaching, biosorption, cryo-milling, electrochemical processes and nanomaterials, siderophores, hydrometallurgy, pyrometallurgy, and supercritical CO₂. The challenges facing this recovery are discussed comprehensively and some possible improvements are presented. This work also highlights the economic and engineering aspects of the recovery of REE from waste electrical and electronic equipment (WEEE). Finally, this review suggests that greener and low chemical consuming technologies, such as siderophores and electrochemical processes, are promising for the recovery of REEs present in small quantities. These technologies present also a potential for large-scale application.

Synthesis of Poly(2-aminothiazole)-Coated Polystyrene Particles and Their Excellent Hg(II) Adsorption Properties

Synthesis of conjugated polymer-coated latex particles is an effective method to improve the poor processability of conjugated polyheterocycles. The key to success is to control the overlayer thickness so it is less than the size of the solvated layer of polymeric stabilizer. This paper presents a protocol to coat polymer latex particles with poly(2-aminothiazole) (PAT), which is a relatively new heterocyclic conjugated polymer. The protocol is based on chemical oxidative polymerizations of 2-aminothiazole using copper chloride as the oxidant at a fixed oxidant/monomer molar ratio of 0.5 in aqueous media in the presence of poly(N-vinyl-2-pyrrolidone)-functionalized polystyrene (PS) latex. The effects of monomer concentration, PS concentration, and polymerization temperature on the morphology of the PAT-coated PS composite particles were investigated by SEM and TEM, and the resulting composite particles characterized by FTIR and XPS. Optimization of the initial monomer concentration allowed colloidally stable PAT-coated PS composite particles to be formed at ambient temperature, and the PAT loading was easily adjusted by varying the initial PS concentration. The Hg(II) adsorption properties of selected PAT-coated PS composite particles were assessed preliminarily. The maximum adsorption capacity at 25 °C reached 440.25 mg/g, which is much higher than many other adsorbents.

Optimized Use of Ferric Chloride and Sesbania Seed Gum (SSG) as Sustainable Coagulant Aid for Turbidity Reduction in Drinking Water Treatment

The growing global concern with environmental issues has raised the interest in the research into natural biopolymers as a coagulant aid in order to reduce the use of inorganic coagulants. This paper investigated the feasibility of sesbania seed gum (SSG) as a plant-based coagulant aid and ferric chloride as a coagulant in drinking water treatment. Acid extraction method marked the highest and most promising extraction yield at 20.8%, as compared to other extraction methods. Further, the SSG extracted carried a weak negative charge of −3.02 mV, which is classified as a near neutral coagulant aid. Hydroxyl and carboxyl functional groups, which aid in coagulation–flocculation, were found in the SSG. These physiochemical analyses results evinced good characteristics of SSG as a coagulant aid. On the other hand, response surface methodology (RSM) with three-factor Box–Behnken design (BBD) was employed to evaluate and optimize the reaction condition of the coagulation–flocculation process in drinking water treatment. A quadratic polynomial model was fitted to the data with a high value of R2 (0.9901). Model validation experiments revealed the good correspondence between actual and predicted values. In drinking water treatment, a promising 98.3% turbidity reduction was achieved with 10.2 mg/L of FeCl3 and 4.52 mg/L of SSG. Therefore, SSG exhibited potential as a coagulant aid in drinking water treatment.

Green chemical method for the synthesis of chromogenic fiber and its application for the detection and extraction of Hg2+ and Cu2+ in environmental medium

To advocate environment friendly detection idea, we adopted the green chemical method to synthesis the 1-(2 amino ethyl) piperidine functionalized polyacrylonitrile fiber (APF) and the chromogenic fiber 4-(2-pyridylazo) resorcinol (APF-PAR). The APF has high adsorption selectivity of Hg²⁺ and Cu²⁺, and the change of structure, surface morphology and thermo-stability before and after adsorption have been characterized by the infrared spectra, scanning electron microscope and thermogravimetric analysis. The APF achieved the adsorption equilibrium of Hg²⁺ just in 25 min and the adsorption capacity is 435.1 mg/g, while the adsorption equilibrium of Cu²⁺ costs 30 min and the adsorption capacity is 141.7 mg/g. The chromogenic fiber APF-PAR can recognize the Hg²⁺ and Cu²⁺ in 2 s, which benefits from the rapid mass transfer and small fluid resistance of the chelating PAN fiber. The color changed from orange to purplish red due to the variation of HOMO-LOMO energy gaps during the reaction which confirmed by the UV-vis absorption spectrum. It also has high selectivity and excellent adsorption performance, which provides more convenient, accurate, reliable and faster testing methods of Hg²⁺ and Cu²⁺ in environmental medium.

Thiophene-based porous organic networks for volatile iodine capture and effectively detection of mercury ion

A series of conjugated microporous polymers containing thiophene-moieties (SCMP-COOH@1-3) was obtained by a homo-coupling polymerization reaction. Then the SCMP-COOH@1-3 were directly pyrolyzed without any templates to synthesize the porous carbon networks, named as SCMP-600@1, 2 and 3. SCMP-600@1-3 possess moderate BET surface area of 362-642 m2 g-1, have a permanent porous structure and plenty of sulfur and oxygen units in the skeletons as effective sorption sites, and display a high absorption performance for iodine vapour with an uptake up to 204 wt.%. In addition, SCMP-COOH@1-3 polymers can be used to effectively detect mercury ion from ethanol-water solution. Interestingly, under the same concentration of Hg2+ conditions, the detection ability of mercury ion of porous materials increased with the increase of the pore volumes and the specific surface.

Three-Dimensional Networks of S-Doped Fe/N/C with Hierarchical Porosity for Efficient Oxygen Reduction in Polymer Electrolyte Membrane Fuel Cells

Reasonable design and synthesis of Fe/N/C-based catalysts is one of the most promising way for developing precious metal-free oxygen reduction reaction (ORR) catalysts in acidic mediums. Herein, we developed a highly active metal-organic framework-derived S-doped Fe/N/C catalyst [S-Fe/Z8/2-aminothiazole (2-AT)] prepared by thermal treatment. The S-Fe/Z8/2-AT catalyst with uniform S-doping possesses a three-dimensional macro-meso-micro hierarchically porous structure. Moreover, the chemical composition and structural features have been well-optimized and characterized for such S-Fe/Z8/2-AT catalysts; and their formation mechanism was also revealed. Significantly, applying the optimal S-Fe/Z8/2-AT catalysts into electrocatalytic test exhibits remarkable ORR catalytic activity with a half-wave potential of 0.82 V (vs reversible hydrogen electrode) and a mass activity of 18.3 A g^-1 at 0.8 V in 0.1 M H₂SO₄ solution; the polymer electrolyte membrane fuel cell test also confirmed their excellent catalytic activity, which gives a maximal power density as high as 800 mW cm^-2 at 1 bar. A series of designed experiments disclosed that the favorable structural merits and desirable chemical compositions of S-Fe/Z8/2-AT catalysts are critical factors for efficient electrocatalytic performance. The work provides a new approach to open an avenue for accurately controlling the composition and structure of Fe/N/C catalysts with highly activity for ORR.

Fabrication of multi-functional porous microspheres in a modular fashion for the detection, adsorption, and removal of pollutants in wastewater

Water pollution control has become significant challenges in recent years because of their extensive species diversity. It is critical to developing general-purpose materials for environmental rehabilitation. In this paper, a novel module-assembly method is developed to prepare multi-functional materials for treating pollutants in water. Building blocks are porous nanoparticles with a different function. Microspheres (MS) with a diameter of 90 μm are prepared and have a coefficient of variation of 6.8%. The modular fashion of self-assembly process in a microfluidic chip is the crucial factor in fabricating the multifunction material. The assembled microspheres with different building modules still have a specific surface area larger than 400 m² g^-1, and exhibit excellent performance in adsorbing various pollutants in water, such as heavy metal ions and organic dyes. The adsorption capacities of them to Hg²⁺ and orange II reach 150 mg g^-1 and 333 mg g^-1, respectively. The integrated fluorescence probes in microspheres can detect low concentration (9.8 ppb) of Hg²⁺. Microspheres integrated with Fe₃O₄ nanoparticles have a magnetic susceptibility of 6.01 emu g^-1 and can be easily removed from wastewater by applying an external magnetic. Due to the stability of inorganic building blocks, each function in the assembled system is well performed, and multi-functional "All-in-One" materials can be easily fabricated.

Optimization of RDM-UF for alfalfa wastewater treatment using RSM

Rotating disk membrane (RDM) module with ultrafiltration (UF) was an effective alternative method to treat alfalfa wastewater and realize protein recovery and agricultural irrigation water production. A scientific investigation has been conducted to comprehend the effect of operation conditions (feed flow rate, shear rate, transmembrane pressure (TMP), and temperature) on alfalfa wastewater treatment with RDM-UF by central composite response surface methodology (CCRSM). First, the filtration behaviors of three types of UF membranes (PES20, UH030P, and PES50) were studied to select the optimized membrane (UH030P). Then, the effects and interactions of four operation conditions were studied and fitting models were established, while data on pollution reduction and protein recovery, membrane fouling behavior, and energy cost evaluation were collected. Furthermore, the optimized operation conditions calculated by CCRSM were Q = 60 L h^-1, γ = 220 × 10³ s^-1, TMP = 5.61 bar, and T = 25 °C. In addition, the concentration test was conducted with these parameters. This work may contribute to the potential application of RDM for membrane wastewater treatment. Graphical abstract Schematic diagram of UF process for alfalfa wastewater treatment and resource recovery.

Efficient Removal of Heavy Metals from Polluted Water with High Selectivity for Mercury(II) by 2-Imino-4-thiobiuret-Partially Reduced Graphene Oxide (IT-PRGO)

A novel chelating adsorbent, based on the chemical modification of graphene oxide by functionalization amidinothiourea to form 2-imino-4-thiobiuret-partially reduced graphene oxide (IT-PRGO), is used for the effective extraction of the toxic metal ions Hg(II), Cu(II), Pb(II), Cr(VI), and As(V) from wastewater. FTIR and Raman spectroscopy, XRD, and XPS confirm the successful incorporation of the amidinothiourea groups within the partially reduced GO nanosheets through nucleophilic substitution reactions with the acyl chloride groups in the chemically modified GO. The IT-PRGO adsorbent shows exceptional selectivity for the extraction of Hg(II) with a capacity of 624 mg/g, placing it among the top of carbon-based materials known for the high capacity of Hg(II) removal from aqueous solutions. The maximum sorption capacities for As(V), Cu(II), Cr(VI), and Pb(II) are 19.0, 37.0, 63.0, and 101.5 mg/g, respectively. The IT-PRGO displays a 100% removal of Hg(II) at concentrations up to 100 ppm with 90%, 95%, and 100% removal within 15, 30, and 90 min, respectively, at 50 ppm concentration. In a mixture of six heavy metal ions containing 10 ppm of each ion, the IT-PRGO shows a removal of 3% Zn(II), 4% Ni(II), 9% Cd(II), 21% Cu(II), 63% Pb(II), and 100% Hg(II). A monolayer adsorption behavior is suggested based on the excellent agreement of the experimental sorption isotherms with the Langmuir model. The sorption kinetics can be fitted well to a pseudo-second-order kinetic model which suggests a chemisorption mechanism via the amidinothiourea groups grafted on the reduced graphene oxide nanosheets. Desorption studies demonstrate that the IT-PRGO is easily regenerated with the desorption of the metal ions Hg(II), Cu(II), Pb(II), Cr(VI), and As(V) reaching 96%, 100%, 100%, 96%, and 100%, respectively, from their maximum sorption capacities using different eluents. The IT-PRGO is proposed as a top performing remediation adsorbent for the extraction of heavy metals from waste and polluted water.

Highly efficient simultaneous adsorption of Cd(ii), Hg(ii) and As(iii) ions from aqueous solutions by modification of graphene oxide with 3-aminopyrazole: central composite design optimization

Efficient simultaneous adsorption of heavy metal ions from solutions by modified graphene oxide with 3-aminopyrazole using central composite design modeling.

Chemical Oxidative Polymerization of 2-Aminothiazole in Aqueous Solution: Synthesis, Characterization and Kinetics Study

The chemical oxidative polymerization of 2-aminothiazole (AT) was studied in aqueous solution using copper chloride (CuCl₂) as an oxidant. The effect of varying the reaction temperature, reaction time and oxidant/monomer molar ratio on the polymer yield was investigated. The resulting poly(2-aminothiazole)s (PATs) were characterized by FTIR, ¹H NMR, UV-vis, gel permeation chromatography, scanning electron microscopy, thermogravimetric analysis and four-point probe electrical conductivity measurements. Compared with a previous study, PATs with higher yield (81%) and better thermal stability could be synthesized. The chemical oxidative polymerization kinetics of AT were studied for the first time. The orders of the polymerization reaction with respect to monomer concentration and oxidant concentration were found to be 1.14 and 0.97, respectively, and the apparent activation energy of the polymerization reaction was determined to be 21.57 kJ/mol.

Removal of mercury by adsorption: a review

Due to natural and production activities, mercury contamination has become one of the major environmental problems over the world. Mercury contamination is a serious threat to human health. Among the existing technologies available for mercury pollution control, the adsorption process can get excellent separation effects and has been further studied. This review is attempted to cover a wide range of adsorbents that were developed for the removal of mercury from the year 2011. Various adsorbents, including the latest adsorbents, are presented along with highlighting and discussing the key advancements on their preparation, modification technologies, and strategies. By comparing their adsorption capacities, it is evident from the literature survey that some adsorbents have shown excellent potential for the removal of mercury. However, there is still a need to develop novel, efficient adsorbents with low cost, high stability, and easy production and manufacture for practical utility.

Removal of copper(II) using deacetylated konjac glucomannan conjugated soy protein isolate

In this study, an environmentally friendly biosorbent deacetylated konjac glucomannan conjugated soy protein isolate (abbreviated as DKGM-C-SPI) was prepared for Cu(2+) ions removal from aqueous solution. Scanning electron microscopy, Fourier transform infrared spectroscopy and zeta potential analysis revealed successful conjugation of soy protein isolate (SPI) onto deacetylated konjac glucomannan (DKGM) matrix. A comparative adsorption performance of DKGM-C-SPI and DKGM was tested to remove Cu(2+) ions from aqueous solution. DKGM-C-SPI showed the desired adsorption performance for Cu(2+) ions. The adsorption equilibrium of DKGM-C-SPI was achieved within 30 min. The adsorption behavior of DKGM-C-SPI followed a pseudo-second-order reaction model. The maximum Cu(2+) ion adsorption capacities obtained from the Langmuir isotherms fit were shown to be 62.50 mg g(-1) for DKGM-C-SPI and 12.23 mg g(-1) for DKGM. This impressive increase about 5 times in Cu(2+) ion adsorption capacity is attributed to the strong Cu(2+) ion chelating ability of the soy protein isolate (SPI) on the DKGM matrix. These results confirm that the DKGM-C-SPI biosorbent has a potential for Cu(2+) ion extraction from wastewater.

Organically-modified magnesium silicate nanocomposites for high-performance heavy metal removal

A disulfide-grafted polyethyleneimine (PES)@Mg₂SiO₄composite was synthesized, characterized, and used successfully to remove heavy metals from wastewater.

Selective removal of copper with polystyrene–1,3-diaminourea chelating resin: synthesis and adsorption studies

In this study, green chloromethylated polystyrene bead–1,3-diaminourea (PS–DU) which was intended to adsorb copper ions was synthesized from chloromethylated polystyrene (PS-Cl) and 1,3-diaminourea (DU).

Granulous KMS-1/PAN composite for Cs+ removal

A novel KMS-1/PAN composite was successfully fabricated simply by combining KMS-1 with PAN. The KMS-1/PAN combines the efficient, rapid adsorption of Cs⁺ by KMS-1 with granulation for easy separation after adsorption.

Rapid removal of copper with magnetic poly-acrylic weak acid resin: quantitative role of bead radius on ion exchange

A novel magnetic weak acid resin NDMC was self-synthesized for the removal of Cu(2+) from aqueous solutions. NDMC showed superior properties on the removal of Cu(2+) compared to commercial resins C106 and IRC-748, which was deeply investigated by adsorption isotherms and kinetic tests. The equilibrium adsorption amount of Cu(2+) onto NDMC (267.2mg/g) was almost twice as large as that onto IRC-748 (120.0mg/g). The adsorption kinetics of Cu(2+) onto the three resins fitted well with the pseudo-second-order equation. The initial adsorption rate h of NDMC was about 4 times that of C106 and nearly 8 times that of IRC-748 at the initial concentration of 500mg/L. External surface area was determined to be the key factor in rate-controlling by further analyzing the adsorption thermodynamics, kinetics parameters and physicochemical properties of the resins. NDMC resin with the smallest bead radius possessed the largest external surface and therefore exhibited the fastest kinetics. The adsorption amount of Cu(2+) onto NDMC was not influenced as the concentration of Na(+) increased from 1.0 to 10.0mM/L. Dilute HCl solution could effectively desorb Cu(2+). NDMC demonstrated high stability during 10 adsorption/desorption cycles, showing great potential in the rapid removal of Cu(2+) from wastewater.