Synthesis of a Water-Soluble Siloxane Copolymer and Its Application for Antimicrobial Coatings

Transparent and ultra-tough PVA/alkaline lignin films with UV shielding and antibacterial functions

Lignin and its derivatives can be used to make membranes with natural polymer materials for its properties including ultraviolet adsorption, biodegradable, antibacterial, and antioxidant. However, the lignin film has poor transparency due to the dark color, and how to control the proportion of each component to enhance properties is the main research topic. In this study, a polyvinyl alcohol /alkaline lignin (PVA/AL) composite film with excellent UV-shielding and visible-transparent performance successfully prepared by solution casting. By mixing with the N-halamine precursor 3-(2,3-dihydroxypropyl)-5,5-dimethylhydantoin (DPDMH), the composite film after chlorination showed superb antibacterial efficacy and could inactivate 6.85 log Escherichia coli (E. coli) and 6.57 log Staphylococcus aureus (S. aureus) respectively within 5 min of contact. Moreover, the composite film with 5 wt% AL exhibited ultra-high elongation of 449 % and toughness of 92 MJ/m³, and the toughness and malleability was greatly improved. In addition, with the introduction of AL, the composite film could shield 100 % of the UVB (320-275 nm) and UVC (275-200 nm) spectra and most of the UVA (400-320 nm) spectrum. The films prepared in this work are expected to find applications in promising fields such as in packaging materials and ultraviolet shielding.

Antimicrobial Mechanisms of Biomaterials: From Macro to Nano

Overcoming the global concern of antibiotic resistance is one of the biggest challenge faced by scientists today and the key to tackle this issue of emerging infectious diseases is the...

Cow dung-derived biochars engineered as antibacterial agents for bacterial decontamination

Disposal of the pollutants arising from farming cattle and other livestock threatens the environment and public safety in diverse ways. Herein, we report on the synthesis of engineered biochars using cow dung as raw material, and investigating these biochars as antibacterial agents for water decontamination. By coating the biochars with N-halamine polymer and loading them with active chlorine (i.e., Cl⁺), we were able to regulate them on demand by tuning the polymer coating and bleaching conditions. The obtained N-halamine-modified biochars were found to be extremely potent against Escherichia coli and Staphylococcus aureus. We also investigated the possibility of using these N-halamine-modified biochars for bacterial decontamination in real-world applications. Our findings indicated that a homemade filter column packed with N-halamine-modified biochars removed pathogenic bacteria from mining sewage, dairy sewage, domestic sewage, and artificial seawater. This proposed strategy could indicate a new way for utilizing livestock pollutants to create on-demand decontaminants.

Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies

The rise of antibiotic-resistant microorganisms has become a critical issue in recent years and has promoted substantial research efforts directed to the development of more effective antimicrobial therapies utilizing different bactericidal mechanisms to neutralize infectious diseases. Modern approaches employ at least two mixed bioactive agents to enhance bactericidal effects. However, the combinations of drugs may not always show a synergistic effect, and further, could also produce adverse effects or stimulate negative outcomes. Therefore, investigations providing insights into the effective utilization of combinations of biocidal agents are of great interest. Sometimes, combination therapy is needed to avoid resistance development in difficult-to-treat infections or biofilm-associated infections treated with common biocides. Thus, this contribution reviews the literature reports discussing the usage of antimicrobial polymers along with nanomaterials or other inhibitors for the development of more potent biocidal therapies.

Reactions of phenolic compounds with monomeric N-halamines and mesoporous material-supported N-halamines

The reactions of a monomeric N-halamine, 1-chloro-5,5-dimethylhydantoin (MCDMH), and a mesoporous material-supported N-halamine (MMSNs) with phenol and p-cresol (two common contaminants in water) were investigated. MCDMH reacted rapidly with the phenolic compounds, and pH values had little effects on the reactions. On the contrary, MMSNs reacted with phenol and p-cresol only when the pH values were higher than 10. Phenol showed a lower reaction rate than p-cresol toward MMSNs. GCMS analysis suggested that MMSNs might react with the phenolic compounds through step-wise electrophilic chlorination reactions, and the main product was 2,4,6-trichlorophenol. The reaction kinetics were studied by following the disappearance of phenolic UV absorption bands, and the kinetic parameters were determined.

Novel N-chloramine precursors for antimicrobial application: synthesis and facile covalent immobilization on polyurethane surface based on perfluorophenyl azide (PFPA) chemistry

To control the pathogen cross contaminations on medical material surface, there is a pressing need to develop antimicrobial materials with highly efficacious surface biocidal activity. In this work, N-chloramine precursors containing a quaternary ammonium unit and perfluorophenyl azide unit were synthesized and covalently immobilized on inert polyurethane (PU) film upon UV light irradiation. The surface modification was confirmed by contact angle, Fourier transform infrared (ATR FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) analyses. After bleaching treatment, satisfactory biocidal activity was achieved for the surface-modified PU films. It was found that the introduced surface QA center contributed an even faster surface contact killing behavior and that precursors with a longer structural linker caused higher surface chlorine content and higher antimicrobial efficacy. This approach provides a novel and facile method that enables the covalent immobilization of N-chloramine precursors on inert polymeric surface to produce durable antimicrobial materials.

Robust nanocoatings based on ionic silicones

Two oppositely charged water-soluble oligosiloxanes with the same main chain were synthesized and used for the formation of multilayer nanocoatings. In spite of low molecular weight of the components, due to entropic reasons, linearly growing and robust films with a hydrophilic surface were formed for the first time. The multilayer films were found to be resistant to high temperature water treatment undergoing only reversible swelling and no surface recovery was observed after prolonged exposure to air indicating permanent water wettability of these silicone-based coatings. High flexibility of the silicone chains resulted in low glass transition temperature (ca. 27 °C) of both dry polyplexes and films as determined using calorimetry and spectroscopic ellipsometry, respectively. Moreover, the thin coating was applied on plasma-treated poly(dimethylsiloxane) preventing surface reconstruction in air and leading to long-lasting hydrophilization of the surface (water contact angles around 65°). Such water-borne systems may be used in common applications of silicones providing high flexibility and at the same time water wettability of the coatings.

Assessing the Biocidal Activity and Investigating the Mechanism of Oligo-p-phenylene-ethynylenes

A number of oligo-p-phenylene-ethynylenes (OPEs) have exhibited excellent biocidal activity against both Gram-negative and Gram-positive bacteria. Although cell death may occur in the dark, these biocidal compounds are far more effective in the light as a result of their abilities to generate cell-damaging reactive oxygen species. In this study, the interactions of four OPEs with Escherichia coli and Staphylococcus aureus have been investigated. Compared to the OPEs with quaternary ammonium salts (Q-OPE), the OPEs with tertiary ammonium (T-OPE) effectively kill many more bacterial cells under light irradiation, presumably by severe perturbations of the bacterial cell wall and cytoplasmic membrane. According to the findings from this study, such intriguing light-induced antibacterial behavior is probably attributed to the combination of bacterial membrane disruption and the interfacial or intracellular generation of singlet oxygen or other ROS. Singlet oxygen was proved to be formed from irradiation of the OPEs, whereas the varying cell membrane perturbation abilities of OPEs enhance antibacterial activity.

Cytocompatible antibacterial fibrous membranes based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and quaternarized N-halamine polymer

A novel polymeric N-halamine-containing quaternary ammonium salt (PHQS) was synthesized and used to make antibacterial electrospun fibrous membranes by blending with biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-4HB)).

Antimicrobial N-halamine polymers and coatings: a review of their synthesis, characterization, and applications

Antimicrobial N-halamine polymers and coatings have been studied extensively over the past decade thanks to their numerous qualities such as effectiveness toward a broad spectrum of microorganisms, long-term stability, regenerability, safety to humans and environment and low cost. In this review, recent developments are described by emphasizing the synthesis of polymers and/or coatings having N-halamine moieties. Actually, three main approaches of preparation are given in detail: polymerization, generation by electrochemical route with proteins as monomers and grafting with precursor monomers. Identification and characterization of the formation of the N-halamine bonds (>N-X with X = Cl or Br or I) by physical techniques such as Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and by chemical reactions are described. In order to check the antimicrobial activity of the N-halamine compounds, bacterial tests are also described. Finally, some examples of application of these N-halamines in the water treatment, paints, healthcare equipment, and textile industries are presented and discussed.

New biocide with both N-chloramine and quaternary ammonium moieties exerts enhanced bactericidal activity

Considering the rise of antibiotic resistance, the development of new antibacterial agents with improved biocidal functions is urgently required. In this study, ionic 5,5-dimethylhydantoin (DMH) analogues containing either a quaternary ammonium moiety (2)-4) or a phosphonate functional group (5),-6), were designed and synthesized to investigate the possible enhancing effect of quaternary ammonium moieties on the antibacterial performance of N-chloramines. These ionic DMH analogues were converted to their N-chloramine counterparts either in free form or after being covalently immobilized on a polymer surface via the "click" chemistry method. In the subsequent antimicrobial assessment against multi-drug-resistant Escherichia coli (MDR-E. coli) and methicillin-resistant Staphylococcus aureus (MRSA), chlorinated 2 and 3, the cyclic N-chloramines with a structural cation, exhibited distinctly enhanced biocidal functions in solution and after immobilization on surfaces.

Light-induced antibacterial activity of symmetrical and asymmetrical oligophenylene ethynylenes

The light-induced antibacterial activity of symmetric and asymmetric oligophenylene ethynylenes (OPEs) was investigated against Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative (Escherichia coli) bacteria. To understand the light-induced biocidal effect better, the transient absorption and triplet lifetime of OPEs were studied in methanol and water. A higher triplet lifetime was observed for OPE samples in water than in methanol. The magnitudes of the changes in optical density (ΔOD) of the S-OPE-n(H) series of symmetric oligomers are much higher than that of the asymmetric OPE-n series in water and are generally correlated with the singlet oxygen yield. It was found that the antibacterial activity against both Gram-positive and Gram-negative bacteria is size-, concentration-, and time-dependent. The light-induced antibacterial activity may result from the coordinated interactions of membrane disruption and interfacial or intracellular singlet oxygen generation, and the dominant factor is most likely the latter. The results obtained in this study will aid in the design of more efficient biocides in the future.

N-halamine biocidal coatings via a layer-by-layer assembly technique

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.

Antimicrobial polymers: mechanism of action, factors of activity, and applications

Complex epidemiological situation, nosocomial infections, microbial contamination, and infection risks in hospital and dental equipment have led to an ever-growing need for prevention of microbial infection in these various areas. Macromolecular systems, due to their properties, allow one to efficiently use them in various fields, including the creation of polymers with the antimicrobial activity. In the past decade, the intensive development of a large class of antimicrobial macromolecular systems, polymers, and copolymers, either quaternized or functionalized with bioactive groups, has been continued, and they have been successfully used as biocides. Various permanent microbicidal surfaces with non-leaching polymer antimicrobial coatings have been designed. Along with these trends, new moderately hydrophobic polymer structures have been synthesized and studied, which contain protonated primary or secondary/tertiary amine groups that exhibited rather high antimicrobial activity, often unlike their quaternary analogues. This mini-review briefly highlights and summarizes the results of studies during the past decade and especially in recent years, which concern the mechanism of action of different antimicrobial polymers and non-leaching microbicidal surfaces, and factors influencing their activity and toxicity, as well as major applications of antimicrobial polymers.

Mechanism of photolytic decomposition of N-halamine antimicrobial siloxane coatings

Generally, antimicrobial N-halamine siloxane coatings can be rehalogenated repetitively upon loss of their biocidal efficacies, a marked advantage over coatings containing other antimicrobial materials. However, the N-halamine materials tend to slowly decompose upon exposure to ultraviolet irradiation as in direct sunlight. In this work the mechanism of photolytic decomposition for the N-halamine siloxanes has been studied using spectroscopic and theoretical methods. It was found that the N-chlorinated coatings slowly decomposed upon UVA irradiation, whereas the unhalogenated coatings did not. Model compound evidence in this work suggests that upon UVA irradiation, the N-Cl bond dissociates homolytically, followed by a Cl radical migration to the alkyl side chain connected to the siloxane tethering group. An alpha and/or beta scission then occurs causing partial loss of the biocidal moiety from the surface of the coated material, thus precluding complete rechlorination. NMR, FTIR, GCMS, and computations at the DFT (U)B3LYP/6-311++G(2d,p) level of theory have been employed in reaching this conclusion.