Influence of Bitumen Colloidal Nature on the Design of Isocyanate-Based Bituminous Products with Enhanced Rheological Properties

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

For achieving the better modifying effect of polyurethane on asphalt pavement materials, the PUA powder modifier was prepared with fine grinding at the glass transition temperature, and polyurethane-modified asphalt (PUA-MA) with different dosages of modifier was prepared. The impact of the PUA on the physical properties of asphalt binder was studied. The modifying mechanism of PUA on asphalt was explored by investigating the thermal performance and chemical composition of asphalt (thermogravimetric analysis, differential scanning calorimetry test, and Fourier transform infrared spectroscopy). The micrograph of the interactive interface was characterized by scanning an electron microscope. Furthermore, the rheological properties of PUA-MA were also investigated and analyzed. The results indicated that the PUA had a dense structure with few pores on the surface. After mixing with asphalt, it altered the asphalt's internal structure via physical fusion and chemical reaction (carbamate formation). PUA improved the thermal stability of asphalt, enhanced the asphalt's thermal decomposition temperature, and further reduced the thermal mass loss while decreasing the glass transition temperature. The addition and dosage increase in the PUA modifier significantly improved the softening point, viscosity, complex shear modulus, and rutting factor of asphalt. Also, the PUA could improve the elastic recovery ability of asphalt and enhance the rutting resistance of asphalt at high temperatures. However, the crack resistance at low temperatures was not effectively improved (ductility and penetration decreased). When the dosage was 6-9%, PUA-MA had the best high-temperature performance, but asphalt showed poor low-temperature performance at this dosage. This study provides a theoretical reference for popularizing and applying polyurethane as an asphalt modifier in road engineering.

Ageing Effects on a Softened Bitumen by the Addition of DSA (Dodecenyl Succinic Anhydride)

The softening of aged bitumen is necessary for a successful asphalt rejuvenation in road recycling operations. Thus, this study proposes a novel and successful approach by using Dodecenyl Succinic Anhydride (DSA), a reactive surfactant with a polar head capable of reacting with some polar compounds of bitumen. On this basis, this paper analyses the softening potential and ageing inhibition capability of the addition of 3 wt.% DSA before and after the application of standard laboratory ageing methods (rolling thin film oven, RTFOT and pressure aging vessel (PAV) tests). To that end, different modified bitumens were evaluated by analysing the linear viscoelastic behaviour, viscous flow properties, thin layer chromatography, Fourier transform infrared spectroscopy (FTIR), contact angle measurements and compactibility tests. The results obtained for DSA show its greater potential to soften a model bitumen, when compared to a diluent oil, through physico-chemical processes that bring about a lowering in the polarity along with the alteration of its colloidal stability. Even though ageing processes in bitumen negatively affect its softening capacity, the developed structures still retain the ability to partially compensate for the adverse hardening effects. Furthermore, DSA addition greatly enhances the binder’s wettability on a siliceous-type aggregate and favours asphalt compaction.

MODIFICATION OF BITUMINOUS BINDERS FOR ASPHALT CONCRETE PAVEMENTS

The review is devoted to the analysis of modern research in the development of formulations and technology for the manufacture of composites based on bituminous binders for the creation of improved asphalt concrete. Methods for modification of bitumen by polymer additives, chemical stabilizers, industrial wastes (recycled polymers, ground tire rubber, fly ash, etc.), nanodispersed additives and carbon nanomaterials to obtain the necessary predetermined properties are considered. The positive and negative aspects of using various modifiers are analyzed. The efficiency of modification of bituminous binders with recycled polymers and nano(ultra)dispersed fillers is shown, which makes it possible to create composites based on bituminous binders for asphalt concrete pavements with high performance characteristics. The optimal content of additives to the bitumen binder has been analyzed: the amount of thermoplastic polymers and thermoplastic elastomers in the range of 3-10 wt.%, thermosetting polymers − over 10 wt.%, elastomers − up to 15 wt.%, and nano-sized additives: nano-oxides ≥ 5 wt.%, nanoclay ~ 3 wt. %, carbon nanotubes, graphene < 1.2 wt.%. Modification of bitumen with recycled polymers and partial replacement of expensive polymer modifiers with cheaper polymer waste, composite modifiers, namely recycled polymer mixed with ground tire rubber and / or fly ash are considered. This allows solving the environmental problems (waste utilization and secondary use) and reduce the cost of asphalt concrete. From the analysis of the experimental results, it becomes clear that for prediction of the properties of modified asphalt concrete, the basic characteristics of the original bitumen, which can differ significantly, are important, as well as the type of modifier (combination of modifiers), its chemical nature, and the efficiency of its dispersing in bitumen. The different chemical composition of the initial bitumen and its physicochemical properties probably play a primary role in imparting high and low temperature properties to asphalt concrete. Modification of a bituminous binder with waste polymers and nanofillers, first of all, makes it possible to improve such important performance characteristics of bitumen and asphalt concrete, such as softening temperature, penetration, penetration index, ductility, viscosity, moisture resistance, complex shear modulus, rutting parameter, resistance to cracking, etc.

Short- and Long-Term Epoxy Modification of Bitumen: Modification Kinetics, Rheological Properties, and Microstructure

Aiming to gain knowledge in the epoxy-bitumen modification mechanisms, this work explores the effects that epoxy concentration and ambient curing exert on the physico-chemistry and thermo-rheological properties of epoxy-modified binders. Process rheokinetics of epoxy-bitumen blends indicates that binder short-term modification (i.e., during processing) is accelerated by epoxy concentration. Furthermore, a synergistic effect of epoxy concentration and ambient curing is found during long-term modification (i.e., during curing at ambient conditions). As a result, viscous and viscoelastic rheological properties of binders are enhanced at medium/high in-service temperatures, at least, after one month of curing. FTIR (Fourier Transform Infrared spectroscopy) tests and SARAs (Saturates, Aromatics, Resins and Asphaltenes) analysis confirm the existence of esterification/etherification reactions between epoxy oxirane groups and the carbonyl groups available in aromatic and resin molecules. Thus, the new high molecular weight compounds increase the asphaltenic fraction of modified bitumen. Likewise, nonreversing heat flow curves obtained by modulated calorimetry corroborate the formation of such highly structured domains responsible for the final binder performance.

Bitumen and Bitumen Modification: A Review on Latest Advances

This synthesis explores the state-of-the-knowledge and state-of-the-practice regarding the latest updates on polymer-modified bitumens (PmBs). The information in this study was gathered from a thorough review of the latest papers in the literatures related to modified bituminous materials, technologies, and advances. For this purpose, the paper is presented in two principle sections. In the first part, the bitumen itself is investigated in terms of chemical structure and microstructural systems. In the second part, the paper focuses on bitumen modification from different aspects for assessing the effectiveness of the introduced additives and polymers for enhancing the engineering properties of bitumen in both paving and industrial applications. In conclusion, the knowledge obtained in this study has revealed the importance of the chemical composition of base bitumen for its modification. It can be declared that while some polymers/additives can improve one or some aspects of neat bitumen properties, they can lead to compatibility problems in storage and production. In this respect, several studies showed the effectiveness of waxes for improving the compatibility of polymers with bitumen in addition to some benefits regarding warm mix asphalt (WMA) production.

Investigation on the Short-Term Aging-Resistance of Thermoplastic Polyurethane-Modified Asphalt Binders

In this reported work, thermoplastic polyurethane (TPU) was used as a reactive polymer modifying agent to prepare a modified-asphalt, using a high-speed shearing method. Physical performance tests of the TPU-modified asphalt were conducted before and after short-term aging, and the aging resistance was examined by the change in materials properties. In addition, low-temperature rheological properties, thermal properties, the high-temperature storage stability, and the aging mechanism of TPU-modified asphalt were also investigated. The results showed that the addition of TPU improved the aging resistance of base asphalt, which was evidenced by the increased penetration ratio and decreased softening point of the asphalt, after aging. Similarly, Fourier Transform infrared (FTIR) spectroscopy results verified that TPU improved the asphalt aging resistance. It was found that the TPU functional groups played a role in improving thermal properties, high-temperature storage stability, and in the dispersion of modified asphalt.

Micromechanism of the Dispersion Behavior of Polymer-Modified Rejuvenators in Aged Asphalt Material

Polymer-modified rejuvenator has a different composition and dispersion behavior to traditional rejuvenators. The objective of this study was to investigate the micromechanism of polymer-modified rejuvenators on the behavior of aged asphalt binder. Firstly, gel permeation chromatography (GPC) analysis was conducted to determine the dispersion effectiveness. Secondly, the dispersal behavior of polymer-modified rejuvenators was studied by means of atomic force microscopy (AFM) and scanning electron microscopy (SEM). Rheological, toughness-tenacity, and force–ductility analyses of the rejuvenated asphalt binder were additionally performed. The results indicate that the contacted asphaltenic micelles in aged asphalt binder were dispersed by dispersion agent in the polymer-modified rejuvenator, and that the dispersion ability of the polymer-modified rejuvenator was promoted to the commercial rejuvenator level. Additionally, the polymer-modified rejuvenator was found to improve the rejuvenated asphalt binder’s resistance to deformation, through the formation of polymeric network structures in the asphalt binder. The results may be used to improve the performance of rejuvenated asphalt binder in recycled-pavement engineering.

Analysis of Adhesive Characteristics of Asphalt Based on Atomic Force Microscopy and Molecular Dynamics Simulation

Asphalt binder is a very important building material in infrastructure construction; it is commonly mixed with mineral aggregate and used to produce asphalt concrete. Owing to the large differences in physical and chemical properties between asphalt and aggregate, adhesive bonds play an important role in determining the performance of asphalt concrete. Although many types of adhesive bonding mechanisms have been proposed to explain the interaction forces between asphalt binder and mineral aggregate, few have been confirmed and characterized. In comparison with chemical interactions, physical adsorption has been considered to play a more important role in adhesive bonding between asphalt and mineral aggregate. In this study, the silicon tip of an atomic force microscope was used to represent silicate minerals in aggregate, and a nanoscale analysis of the characteristics of adhesive bonding between asphalt binder and the silicon tip was conducted via an atomic force microscopy (AFM) test and molecular dynamics (MD) simulations. The results of the measurements and simulations could help in better understanding of the bonding and debonding procedures in asphalt-aggregate mixtures during hot mixing and under traffic loading. MD simulations on a single molecule of a component of asphalt and monocrystalline silicon demonstrate that molecules with a higher atomic density and planar structure, such as three types of asphaltene molecules, can provide greater adhesive strength. However, regarding the real components of asphalt binder, both the MD simulations and AFM test indicate that the colloidal structural behavior of asphalt also has a large influence on the adhesion behavior between asphalt and silicon. A schematic model of the interaction between asphalt and silicon is presented, which can explain the effect of aging on the adhesion behavior of asphalt.

A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility

During the last decades, the number of vehicles per citizen as well as the traffic speed and load has dramatically increased. This sudden and somehow unplanned overloading has strongly shortened the life of pavements and increased its cost of maintenance and risks to users. In order to limit the deterioration of road networks, it is necessary to improve the quality and performance of pavements, which was achieved through the addition of a polymer to the bituminous binder. Since their introduction, polymer-modified asphalts have gained in importance during the second half of the twentieth century, and they now play a fundamental role in the field of road paving. With high-temperature and high-shear mixing with asphalt, the polymer incorporates asphalt molecules, thereby forming a swallowed network that involves the entire binder and results in a significant improvement of the viscoelastic properties in comparison with those of the unmodified binder. Such a process encounters the well-known difficulties related to the poor solubility of polymers, which limits the number of macromolecules able to not only form such a structure but also maintain it during high-temperature storage in static conditions, which may be necessary before laying the binder. Therefore, polymer-modified asphalts have been the subject of numerous studies aimed to understand and optimize their structure and storage stability, which gradually attracted polymer scientists into this field that was initially explored by civil engineers. The analytical techniques of polymer science have been applied to polymer-modified asphalts, which resulted in a good understanding of their internal structure. Nevertheless, the complexity and variability of asphalt composition rendered it nearly impossible to generalize the results and univocally predict the properties of a given polymer/asphalt pair. The aim of this paper is to review these aspects of polymer-modified asphalts. Together with a brief description of the specification and techniques proposed to quantify the storage stability, state-of-the-art knowledge about the internal structure and morphology of polymer-modified asphalts is presented. Moreover, the chemical, physical, and processing solutions suggested in the scientific and patent literature to improve storage stability are extensively discussed, with particular attention to an emerging class of asphalt binders in which the technologies of polymer-modified asphalts and polymer nanocomposites are combined. These polymer-modified asphalt nanocomposites have been introduced less than ten years ago and still do not meet the requirements of industrial practice, but they may constitute a solution for both the performance and storage requirements.