A Solid State NMR Study of Dynamics in a Hydrated Salivary Peptide Adsorbed to Hydroxyapatite

A Molecular-Scale Understanding of Misorientation Toughening in Corals and Seashells

Biominerals are organic-mineral composites formed by living organisms. They are the hardest and toughest tissues in those organisms, are often polycrystalline, and their mesostructure (which includes nano- and microscale crystallite size, shape, arrangement, and orientation) can vary dramatically. Marine biominerals may be aragonite, vaterite, or calcite, all calcium carbonate (CaCO₃ ) polymorphs, differing in crystal structure. Unexpectedly, diverse CaCO₃ biominerals such as coral skeletons and nacre share a similar characteristic: Adjacent crystals are slightly misoriented. This observation is documented quantitatively at the micro- and nanoscales, using polarization-dependent imaging contrast mapping (PIC mapping), and the slight misorientations is consistently between 1° and 40°. Nanoindentation shows that both polycrystalline biominerals and abiotic synthetic spherulites are tougher than single-crystalline geologic aragonite, and molecular dynamics (MD) simulations of bicrystals at the molecular scale reveals that aragonite, vaterite, and calcite exhibit toughness maxima when the bicrystals are misoriented by 10°, 20°, and 30°, respectively, demonstrating that slight misorientation alone can increase fracture toughness. Slight-misorientation-toughening can be harnessed for synthesis of bioinspired materials that only require one material, are not limited to specific top-down architecture, and are easily achieved by self-assembly of organic molecules (e.g., aspirin, chocolate), polymers, metals, and ceramics well beyond biominerals.

Binding Mode Characterization of Osteopontin on Hydroxyapatite by Solution NMR Spectroscopy

Extracellular matrix glycoproteins play a major role in bone mineralization and modulation of osteogenesis. Among these, the intrinsically disordered protein osteopontin (OPN) is associated with the inhibition of formation, growth and proliferation of the bone mineral hydroxyapatite (HAP). Furthermore, post-translational modifications like phosphorylation can alter conformations and interaction properties of intrinsically disordered proteins (IDPs). Therefore, the actual interaction of OPN with a HAP surface on an atomic level and how this interaction is affected by phosphorylation is of great interest. Here, we study the interaction of full-length OPN on the surface of suspended HAP nanoparticles by solution NMR spectroscopy. We report the binding modes of this IDP and provide evidence for the influence of hyperphosphorylation on the binding character and an explanation for the differing roles in biomineralization. Our study moreover presents an easy and suitable option to measure interaction of nanoparticles in a stable suspension with full-length proteins.

Controls of nature: Secondary, tertiary, and quaternary structure of the enamel protein amelogenin in solution and on hydroxyapatite

Amelogenin, a protein critical to enamel formation, is presented as a model for understanding how the structure of biomineralization proteins orchestrate biomineral formation. Amelogenin is the predominant biomineralization protein in the early stages of enamel formation and contributes to the controlled formation of hydroxyapatite (HAP) enamel crystals. The resulting enamel mineral is one of the hardest tissues in the human body and one of the hardest biominerals in nature. Structural studies have been hindered by the lack of techniques to evaluate surface adsorbed proteins and by amelogenin's disposition to self-assemble. Recent advancements in solution and solid state nuclear magnetic resonance (NMR) spectroscopy, atomic force microscopy (AFM), and recombinant isotope labeling strategies are now enabling detailed structural studies. These recent studies, coupled with insights from techniques such as CD and IR spectroscopy and computational methodologies, are contributing to important advancements in our structural understanding of amelogenesis. In this review we focus on recent advances in solution and solid state NMR spectroscopy and in situ AFM that reveal new insights into the secondary, tertiary, and quaternary structure of amelogenin by itself and in contact with HAP. These studies have increased our understanding of the interface between amelogenin and HAP and how amelogenin controls enamel formation.

Natural protein bioinspired materials for regeneration of hard tissues

This review describes the protein bioinspired materials for the repair of hard tissues such as enamel, dentin and bone.

Solid-State NMR and MD Study of the Structure of the Statherin Mutant SNa15 on Mineral Surfaces

Elucidation of the structure and interactions of proteins at native mineral interfaces is key to understanding how biological systems regulate the formation of hard tissue structures. In addition, understanding how these same proteins interact with non-native mineral surfaces has important implications for the design of medical and dental implants, chromatographic supports, diagnostic tools, and a host of other applications. Here, we combine solid-state NMR spectroscopy, isotherm measurements, and molecular dynamics simulations to study how SNa15, a peptide derived from the hydroxyapatite (HAP) recognition domain of the biomineralization protein statherin, interacts with HAP, silica (SiO₂), and titania (TiO₂) mineral surfaces. Adsorption isotherms are used to characterize the binding affinity of SNa15 to HAP, SiO₂, and TiO₂. We also apply 1D ¹³C CP MAS, 1D ¹⁵N CP MAS, and 2D ¹³C-¹³C DARR experiments to SNa15 samples with uniformly ¹³C- and ¹⁵N-enriched residues to determine backbone and side-chain chemical shifts. Different computational tools, namely TALOS-N and molecular dynamics simulations, are used to deduce secondary structure from backbone and side-chain chemical shift data. Our results show that SNa15 adopts an α-helical conformation when adsorbed to HAP and TiO₂, but the helix largely unravels upon adsorption to SiO₂. Interactions with HAP are mediated in general by acidic and some basic amino acids, although the specific amino acids involved in direct surface interaction vary with surface. The integrated experimental and computational approach used in this study is able to provide high-resolution insights into adsorption of proteins on interfaces.

Molecular Recognition at the Protein-Hydroxyapatite Interface

Proteins found in mineralized tissues act as nature’s crystal engineers, where they play a key role in promoting or inhibiting the growth of minerals such as hydroxyapatite (bones/teeth) and calcium oxalate (kidney stones). Despite their importance in hard-tissue formation and remodeling, and in pathological processes such as stone formation and arterial calcification, there is little known of the protein structure-function relationships that govern hard-tissue engineering. Here we review early studies that have utilized solid-state NMR (ssNMR) techniques to provide in situ secondary-structure determination of statherin and statherin peptides on their biologically relevant hydroxyapatite (HAP) surfaces. In addition to direct structural study, molecular dynamics studies have provided considerable insight into the protein-binding footprint on hydroxyapatite. The molecular insight provided by these studies has also led to the design of biomimetic fusion peptides that utilize nature’s crystal-recognition mechanism to display accessible and dynamic bioactive sequences from the HAP surface. These peptides selectively engage adhesion receptors and direct specific outside-in signaling pathway activation in osteoblast-like cells.

Solid-state NMR studies of proteins immobilized on inorganic surfaces

Solid state NMR is the primary tool for studying the quantitative, site-specific structure, orientation, and dynamics of biomineralization proteins under biologically relevant conditions. Two calcium phosphate proteins, statherin (43 amino acids) and leucine rich amelogenin protein (LRAP; 59 amino acids), have been studied in depth and have different dynamic properties and 2D- and 3D-structural features. These differences make it difficult to extract design principles used in nature for building materials with properties such as high strength, unusual morphologies, or uncommon phases. Consequently, design principles needed for developing synthetic materials controlled by proteins are not clear. Many biomineralization proteins are much larger than statherin and LRAP, necessitating the study of larger biomineralization proteins. More recent studies of the significantly larger full-length amelogenin (180 residues) represent a significant step forward to ultimately investigate the full diversity of biomineralization proteins. Interactions of amino acids, a silaffin derived peptide, and the model LK peptide with silica are also being studied, along with qualitative studies of the organic matrices interacting with calcium carbonate. Dipolar recoupling techniques have formed the core of the quantitative studies, yet the need for isolated spin pairs makes this approach costly and time intensive. The use of multi-dimensional techniques to study biomineralization proteins is becoming more common, methodology which, despite its challenges with these difficult-to-study proteins, will continue to drive future advancements in this area.

A study of phenylalanine side-chain dynamics in surface-adsorbed peptides using solid-state deuterium NMR and rotamer library statistics

Extracellular matrix proteins adsorbed onto mineral surfaces exist in a unique environment where the structure and dynamics of the protein can be altered profoundly. To further elucidate how the mineral surface impacts molecular properties, we perform a comparative study of the dynamics of nonpolar side chains within the mineral-recognition domain of the biomineralization protein salivary statherin adsorbed onto its native hydroxyapatite (HAP) mineral surface versus the dynamics displayed by the native protein in the hydrated solid state. Specifically, the dynamics of phenylalanine side chains (viz., F7 and F14) located in the surface-adsorbed 15-amino acid HAP-recognition fragment (SN15: DpSpSEEKFLRRIGRFG) are studied using deuterium magic angle spinning ((2)H MAS) line shape and spin-lattice relaxation measurements. (2)H NMR MAS spectra and T1 relaxation times obtained from the deuterated phenylalanine side chains in free and HAP-adsorbed SN15 are fitted to models where the side chains are assumed to exchange between rotameric states and where the exchange rates and a priori rotameric state populations are varied iteratively. In condensed proteins, phenylalanine side-chain dynamics are dominated by 180° flips of the phenyl ring, i.e., the "π flip". However, for both F7 and F14, the number of exchanging side-chain rotameric states increases in the HAP-bound complex relative to the unbound solid sample, indicating that increased dynamic freedom accompanies introduction of the protein into the biofilm state. The observed rotameric exchange dynamics in the HAP-bound complex are on the order of 5-6 × 10(6) s(-1), as determined from the deuterium MAS line shapes. The dynamics in the HAP-bound complex are also shown to have some solution-like behavioral characteristics, with some interesting deviations from rotameric library statistics.

Mineral association changes the secondary structure and dynamics of murine amelogenin

Amelogenin is one of the key protein constituents responsible for the exquisite organization of the calcium phosphate crystals in enamel. Amelogenin forms into nanospheres in solution, while its association with hydroxyapatite is also essential to enamel development. Structural information of full-length amelogenin in either of these physiologically important forms has the potential to provide mechanistic information; however, these data are limited because of the difficulty of determining the structure of large protein complexes and proteins bound to surfaces. To obtain structural insights into amelogenin during these early stages of enamel development, we used a lysine-specific (13)C-, (15)N-labeled sample of murine amelogenin to provide insight into the structure of the hydroxyapatite (HAP)-binding domains of the protein. A combination of one-and two-dimensional solid-state NMR experiments was used to obtain molecular-level insights into the secondary structure and dynamics of full-length amelogenin within a nanosphere-gel and on the surface of HAP. Regions of amelogenin that appear to be primarily random coil in the nanosphere-gel adopt a β-strand structure and are less mobile with HAP binding, indicative of a structural switch upon binding that may be important in the role of amelogenin in enamel development.

Solid-state NMR studies of biomineralization peptides and proteins

Nature has evolved sophisticated strategies for engineering hard tissues through the interaction of proteins, and ultimately cells, with inorganic mineral phases. This process, called biomineralization, is how living organisms transform inorganic materials such as hydroxyapatite, calcite, and silica into highly intricate and organized structures. The remarkable material properties of shell, bone, and teeth come from the activities of proteins that function at the organic-inorganic interface. A better understanding of the biomolecular mechanisms used to promote or retard the formation of mineral-based structures could provide important design principles for the development of calcification inhibitors and promoters in orthopedics, cardiology, urology, and dentistry. With the knowledge of the structural basis for control of hard tissue growth by proteins, scientists could potentially develop materials using biomimetic principles with applications in catalysis, biosensors, electronic devices, and chromatographic separations, to name a few. Additionally, biomineralization also has potential applications in electronics, catalysis, magnetism, sensory devices, and mechanical design. Where man-made hard materials require the use of extreme temperatures, high pressure, and pH, biological organisms can accomplish these feats at ambient temperature and at physiological pH. Despite the fact that many researchers want to identify and control the structure of proteins at material and biomineral interfaces, there is a decided lack of molecular-level structure information available for proteins at biomaterial interfaces in general. In particular, this holds for mammalian proteins that directly control calcification processes in hard tissue. The most fundamental questions regarding the secondary and tertiary structures of proteins adsorbed to material surfaces, how proteins catalyze the formation of biomineral composites, or how proteins interact at biomaterial interfaces remain unanswered. This is largely due to a lack of methods capable of providing high-resolution structural information for proteins adsorbed to material surfaces under physiologically relevant conditions. In this Account, we highlight recent work that is providing insight into the structure and crystal recognition mechanisms of a salivary protein model system, as well as the structure and interactions of a peptide that catalyzes the formation of biosilica composites. To develop a better understanding of the structure and interactions of proteins in biomaterials, we have used solid-state NMR techniques to determine the molecular structure and dynamics of proteins and peptides adsorbed onto inorganic crystal surfaces and embedded within biomineral composites. This work adds to the understanding of the structure and crystal recognition mechanisms of an acidic human salivary phosphoprotein, statherin.

Adsorption microcalorimetry: recent advances in instrumentation and application

Adsorption microcalorimetry measures the energetics of adsorbate-surface interactions and can be performed by use of several different techniques. This review focuses on three methods: single-crystal adsorption calorimetry (SCAC), isothermal titration calorimetry (ITC), and electrochemical adsorption calorimetry. SCAC is a uniquely powerful technique that has been applied to a variety of atoms and molecules that represent a large variety of well-defined adsorbate species on a wide range of single-crystal surfaces. ITC and electrochemical microcalorimetry are useful for studying adsorption energies in liquid solutions (on surfaces of suspended powders) and at the electrode-electrolyte interface, respectively. Knowledge of the energetics of adsorbate formation is valuable to ongoing research in many fields, including catalysis, fuel cells, and solar power. In addition, calorimetric measurements serve as benchmarks for the improvement of computational approaches to understanding surface chemistry. We review instrumentation and applications, emphasizing our own work.

Molecular level characterization of the inorganic-bioorganic interface by solid state NMR: alanine on a silica surface, a case study

The molecular interface between bioorganics and inorganics plays a key role in diverse scientific and technological research areas including nanoelectronics, biomimetics, biomineralization, and medical applications such as drug delivery systems and implant coatings. However, the physical/chemical basis of recognition of inorganic surfaces by biomolecules remains unclear. The molecular level elucidation of specific interfacial interactions and the structural and dynamical state of the surface bound molecules is of prime scientific importance. In this study, we demonstrate the ability of solid state NMR methods to accomplish these goals. L-[1-(13)C,(15)N]Alanine loaded onto SBA-15 mesoporous silica with a high surface area served as a model system. The interacting alanine moiety was identified as the -NH(3)(+) functional group by (15)N{(1)H}SLF NMR. (29)Si{(15)N} and (15)N{(29)Si}REDOR NMR revealed intermolecular interactions between the alanine -NH(3)(+) and three to four surface Si species, predominantly Q(3), with similar internuclear N...Si distances of 4.0-4.2 A. Distinct dynamic states of the adsorbed biomolecules were identified by (15)N{(13)C}REDOR NMR, indicating both bound and free alanine populations, depending on hydration level and temperature. In the bound populations, the -NH(3)(+) group is surface anchored while the free carboxylate end undergoes librations, implying the carboxylate has small or no contributions to surface binding. When surface water clusters grow bigger with increased hydration, the libration amplitude of the carboxyl end amplifies, until onset of dissolution occurs. Our measurements provide the first direct, comprehensive, molecular-level identification of the bioorganic-inorganic interface, showing binding functional groups, geometric constraints, stoichiometry, and dynamics, both for the adsorbed amino acid and the silica surface.

Effects of amantadine on the dynamics of membrane-bound influenza A M2 transmembrane peptide studied by NMR relaxation

The molecular motions of membrane proteins in liquid-crystalline lipid bilayers lie at the interface between motions in isotropic liquids and in solids. Specifically, membrane proteins can undergo whole-body uniaxial diffusion on the microsecond time scale. In this work, we investigate the (1)H rotating-frame spin-lattice relaxation (T (1rho)) caused by the uniaxial diffusion of the influenza A M2 transmembrane peptide (M2TMP), which forms a tetrameric proton channel in lipid bilayers. This uniaxial diffusion was proved before by (2)H, (15)N and (13)C NMR lineshapes of M2TMP in DLPC bilayers. When bound to an inhibitor, amantadine, the protein exhibits significantly narrower linewidths at physiological temperature. We now investigate the origin of this line narrowing through temperature-dependent (1)H T (1rho) relaxation times in the absence and presence of amantadine. Analysis of the temperature dependence indicates that amantadine decreases the correlation time of motion from 2.8 +/- 0.9 mus for the apo peptide to 0.89 +/- 0.41 micros for the bound peptide at 313 K. Thus the line narrowing of the bound peptide is due to better avoidance of the NMR time scale and suppression of intermediate time scale broadening. The faster diffusion of the bound peptide is due to the higher attempt rate of motion, suggesting that amantadine creates better-packed and more cohesive helical bundles. Analysis of the temperature dependence of ln(T_1rho(-1)) indicates that the activation energy of motion increased from 14.0 +/- 4.0 kJ/mol for the apo peptide to 23.3 +/- 6.2 kJ/mol for the bound peptide. This higher activation energy indicates that excess amantadine outside the protein channel in the lipid bilayer increases the membrane viscosity. Thus, the protein-bound amantadine speeds up the diffusion of the helical bundles while the excess amantadine in the bilayer increases the membrane viscosity.

Characterization of the dominant molecular step orientations on hydroxyapatite (100) surfaces

Hydroxyapatite (HAP) is the major inorganic component of bones and teeth. The characterization of HAP surfaces on the molecular level is important for achieving a fundamental understanding of bone remodeling and dental caries processes. On the microscopic level, hydroxyapatite growth and dissolution reactions mainly occur at steps. Therefore, this study focuses on individual molecular steps on HAP (100) facets under both static conditions and dynamic dissolution conditions using atomic force microscopy (AFM). We found that molecular steps parallel to the elongated axes of HAP crystals and those angled approximately 54 degrees against the elongated axis are not only energetically favorable but also kinetically dominant under dissolution conditions.

Structure, orientation, and dynamics of the C-terminal hexapeptide of LRAP determined using solid-state NMR

Amelogenin is the predominant protein found during enamel development and has been shown to be essential to proper enamel formation. Leucine-rich amelogenin peptide (LRAP) is a naturally occurring splice variant that preserves the charged N- and C-termini of full length amelogenin, regions thought to be crucial in interacting with hydroxaypatite. Particularly, the highly charged C-terminal hexapeptide (KREEVD) is thought to be the region most intimately interacting with hydroxyapatite (HAP). The structure of this charged region was investigated, along with the proximity to the surface and the mobility of two of the residues. The structure was found to be consistent with a random coil or more extended structure, as has been seen for more internalized residues in the C-terminus. The backbone K54(13C'), V58(13C'), and V58(15N) were all found to be close to the surface of HAP, approximately 6.0 angstroms from the nearest 31P atom, suggesting a strong interaction and emphasizing the importance of these residues in interacting with HAP. However, both ends of the hexapeptide at residues K54 and V58 experience significant mobility under hydrated conditions, implying that another portion of the protein helps to stabilize the strong LRAP-HAP interaction. Interestingly, the backbone of the C-terminal third of the protein is consistently 6.0 angstroms from the HAP surface, providing a model in this region of the protein lying flat on the surface with no three-dimensional folding. The combination of these features, that is, a random coil structure, a significant mobility, and a lack of three-dimensional folding in this region of the protein, may have an important functional role, possibly allowing maximum crystal inhibition at low protein concentrations.

Solid-state NMR studies of bacterial lipoteichoic acid adsorption on different surfaces

Teichoic acids are important to bacteria for surface adhesion, metal ion coordination, and other biological processes crucial to bacterial survival. In particular, the surface adhesion of teichoic acids plays a crucial role in the formation of Gram-positive biofilms. Biofilms have been implicated as the major cause of various chronic infections. Biofilm formation is essentially a four-step process beginning with the adhesion of bacteria to a surface, followed by the excretion of an extracellular polymeric substance (slime), development and maturation of the biofilm architecture, and finally biofilm spreading through bacterial release. Currently, there is very little molecular level information available for the initial adhesion of bacteria to solid surfaces. Solid-state NMR is ideally suited for the study of these samples, thus we use (31)P solid-state NMR experiments to study the initial adhesion of lipoteichoic acid (LTA) to various surfaces. (31)P CP-MAS spectra and T(1)(rho) data demonstrate that the structure of LTA changes when adhered to cellulose, cell wall peptidoglycan (PGN), or TiO(2). However, when LTA is simultaneously adhered to PGN and TiO(2) the observed structure is dependent on the amount of retained water. For LTA on TiO(2), we suggest that the alanine and glucosamine groups interact with the surface. However, during simultaneous adhesion to TiO(2) and PGN, the glucosamine groups bind to the PGN while the alanine groups bind to the surface. This arrangement traps water between the PGN and TiO(2) surface.

The helical structure of surfactant peptide KL4 when bound to POPC: POPG lipid vesicles

KL 4 is a 21-residue peptide employed as a functional mimic of lung surfactant protein B, which successfully lowers surface tension in the alveoli. A mechanistic understanding of how KL 4 affects lipid properties has proven elusive as the secondary structure of KL 4 in lipid preparations has not been determined at high resolution. The sequence of KL 4 is based on the C-terminus of SP-B, a naturally occurring helical protein that binds to lipid interfaces. The spacing of the lysine residues in KL 4 precludes the formation of a canonical amphipathic alpha-helix; qualitative measurements using Raman, CD, and FTIR spectroscopies have given conflicting results as to the secondary structure of the peptide as well as its orientation in the lipid environment. Here, we present a structural model of KL 4 bound to lipid bilayers based on solid state NMR data. Double-quantum correlation experiments employing (13)C-enriched peptides were used to quantitatively determine the backbone torsion angles in KL 4 at several positions. These measurements, coupled with CD experiments, verify the helical nature of KL 4 when bound to lipids, with (phi, psi) angles that differ substantially from common values for alpha-helices of (-60, -45). The average torsion angles found for KL 4 bound to POPC:POPG lipid vesicles are (-105, -30); this deviation from ideal alpha-helical structure allows KL 4 to form an amphipathic helix at the lipid interface.

The structure and orientation of the C-terminus of LRAP

Amelogenin is the predominant protein found during enamel development and is thought to be the biomineralization protein controlling the unique elongated hydroxyapatite crystals that constitute enamel. The secondary structure of biomineralization proteins is thought to be important in the interaction with hydroxyapatite. Unfortunately, very little data are available on the structure or the orientation of amelogenin, either in solution or bound to hydroxyapatite. The C-terminus contains the majority of the charged residues and is predicted to interact with hydroxyapatite; thus, we used solid-state NMR dipolar recoupling techniques to investigate the structure and orientation of the C-terminus of LRAP, a naturally occurring splice variant of full-length amelogenin. Using (13)C{(15)N} Rotational Echo DOuble Resonance (REDOR), the structure of the C-terminus was found to be largely random coil, both on the surface of hydroxyapatite as well as lyophilized from solution. The orientation of the C-terminal region with respect to hydroxyapatite was investigated for two alanine residues (Ala(46) and Ala(49)) using (13)C{(31)P} REDOR and one lysine residue (Lys(52)) using (15)N{(31)P} REDOR. The residues examined were found to be 7.0, 5.7, and 5.8 A from the surface of hydroxyapatite for Ala(46), Ala(49), and Lys(52), respectively. This provides direct evidence that the charged C-terminus is interacting closely with hydroxyapatite, positioning the acidic amino acids to aid in controlling crystal growth. However, solid-state NMR dynamics measurements also revealed significant mobility in the C-terminal region of the protein, in both the side chains and the backbone, suggesting that this region alone is not responsible for binding.

Adsorption of a statherin peptide fragment on the surface of nanocrystallites of hydroxyapatite

Statherin is an active inhibitor of calcium phosphate precipitation in the oral cavity. For many studies of the interaction between statherin and hydroxyapatite (HAp), the samples are prepared by a direct mixing of statherin or its fragment with well-crystalline HAp crystals. In this work, the HAp sample is precipitated in the presence of peptide fragment derived from the N-terminal 15 amino acids of statherin (SN-15). The in situ prepared HAp crystallites are nanosized, leading to a significant increase of the peptide amount adsorbed on the HAp surface. The enhancement in NMR sensitivity allows, for the first time, the measurement of a two-dimensional 13C-13C correlation spectrum for a 13C uniformly labeled peptide sample adsorbed on mineral surface. The measurement time is about 18.5 h at a field strength of 7.05 T. Preliminary results suggest that there may exist two different mechanisms for the interaction between SN-15 and HAp. In addition to the one which will cause a conformational change near the N-terminal, SN-15 may also be absorbed on the HAp surface by simple electrostatic interaction, without any significant conformational changes of the peptides.

Optimizing ssNMR experiments for dilute proteins in heterogeneous mixtures at high magnetic fields

Solid-state NMR spectroscopy at high magnetic fields is proving to be an effective technique in structural biology, particularly for proteins which are not amenable to traditional X-ray and solution NMR approaches. Several parameters can be selected to provide optimal sensitivity, improve sample stability, and ensure biological relevance for ssNMR measurements on protein samples. These include selection of sample conditions, NMR probe design, and design of pulse experiments. Here, we demonstrate and evaluate several engineering and experimental approaches for pursuing measurements on dilute proteins in heterogeneous mixtures.

Protein adsorption onto silica nanoparticles: conformational changes depend on the particles' curvature and the protein stability

We have analyzed the adsorption of protein to the surfaces of silica nanoparticles with diameters of 6, 9, and 15 nm. The effects upon adsorption on variants of human carbonic anhydrase with differing conformational stabilities have been monitored using methods that give complementary information, i.e., circular dichroism (CD), nuclear magnetic resonance (NMR), analytical ultracentrifugation (AUC), and gel permeation chromatography. Human carbonic anhydrase I (HCAI), which is the most stable of the protein variants, establishes a dynamic equilibrium between bound and unbound protein following mixture with silica particles. Gel permeation and AUC experiments indicate that the residence time of HCAI is on the order of approximately 10 min and slowly increases with time, which allows us to study the effects of the interaction with the solid surface on the protein structure in more detail than would be possible for a process with faster kinetics. The effects on the protein conformation from the interaction have been characterized using CD and NMR measurements. This study shows that differences in particle curvature strongly influence the amount of the protein's secondary structure that is perturbed. Particles with a longer diameter allow formation of larger particle-protein interaction surfaces and cause larger perturbations of the protein's secondary structure upon interaction. In contrast, the effects on the tertiary structure seem to be independent of the particles' curvature.

The COOH terminus of the amelogenin, LRAP, is oriented next to the hydroxyapatite surface

The organic matrix in forming enamel consists largely of the amelogenin protein self-assembled into nanospheres that are necessary to guide the formation of the unusually long and highly ordered hydroxyapatite (HAP) crystallites that constitute enamel. Despite its ability to direct crystal growth, the interaction of the amelogenin protein with HAP is unknown. However, the demonstration of growth restricted to the c-axis suggests a specific protein-crystal interaction, and the charged COOH terminus is often implicated in this function. To elucidate whether the COOH terminus is important in the binding and orientation of amelogenin onto HAP, we have used solid state NMR to determine the orientation of the COOH terminus of an amelogenin splice variant, LRAP (leucine-rich amelogenin protein), which contains the charged COOH terminus of the full protein, on the HAP surface. These experiments demonstrate that the methyl 13C-labeled side chain of Ala46 is 8.0 A from the HAP surface under hydrated conditions, for the protein with and without phosphorylation. The experimental results provide direct evidence orienting the charged COOH-terminal region of the amelogenin protein on the HAP surface, optimized to exert control on developing enamel crystals.

Biomimetic peptides that engage specific integrin-dependent signaling pathways and bind to calcium phosphate surfaces

Many important matrix proteins involved in bone remodeling contain separate domains that orient the protein on hydroxyapatite and interact with target cell receptors, respectively. We have designed two synthetic peptides that mimic the dual activities of these large, complex proteins by binding to calcium phosphate minerals and by engaging integrin-dependent signaling pathways in osteoblasts. The addition of either PGRGDS from osteopontin or PDGEA from collagen type I to the HAP-binding domain of statherin (N15 domain) did not alter its alpha-helical structure or diminish its affinity for hydroxyapatite. Immobilized N15-PGRGDS bound MC3T3-E1 osteoblasts predominantly via the alpha v beta 3 integrin and induced focal adhesion kinase (FAK) phosphorylation at comparable levels to immobilized osteopontin. Immobilized N15-PDGEA bound MC3T3-E1 osteoblasts predominantly through the alpha 2 beta 1 integrin and induced similar levels of FAK phosphorylation. Although both peptides induced FAK phosphorylation with similar time courses, only the N15-PDGEA peptide induced ERK1/2 phosphorylation, showing that these peptides are also capable of engaging integrin-specific signaling pathways. This peptide system can be used to study adhesion-dependent control of signaling in the context of the relevant biomineral surface and may also be useful in biomaterial and tissue engineering applications.

Structural studies of biomaterials using double-quantum solid-state NMR spectroscopy

Proteins directly control the nucleation and growth of biominerals, but the details of molecular recognition at the protein-biomineral interface remain poorly understood. The elucidation of recognition mechanisms at this interface may provide design principles for advanced materials development in medical and ceramic composites technologies. Here, we describe both the theory and practice of double-quantum solid-state NMR (ssNMR) structure-determination techniques, as they are used to determine the secondary structures of surface-adsorbed peptides and proteins. In particular, we have used ssNMR dipolar techniques to provide the first high-resolution structural and dynamic characterization of a hydrated biomineralization protein, salivary statherin, adsorbed to its biologically relevant hydroxyapatite (HAP) surface. Here, we also review NMR data on peptides designed to adsorb from aqueous solutions onto highly porous hydrophobic surfaces with specific helical secondary structures. The adsorption or covalent attachment of biological macromolecules onto polymer materials to improve their biocompatibility has been pursued using a variety of approaches, but key to understanding their efficacy is the verification of the structure and dynamics of the immobilized biomolecules using double-quantum ssNMR spectroscopy.

Asymmetric -helicity loss within a peptide adsorbed onto charged colloidal substrates

A combination of circular dichroism and solution 1H NMR spectroscopy provides a localized description of the distribution of alpha -helical structure within the capped peptide DDDDAAAAARRRR (4DAR5) in aqueous solution and adsorbed onto anionic and cationic colloidal substrates. The adsorption-induced conformational changes are different from those observed upon heating 4DAR5 in solution, in which case the alanine segment remains largely alpha -helical and the transition to a coil structure propagates from the termini. Adsorption is driven by electrostatic complementarity, which places the charged peptide segment adjacent to the substrate of opposite charge. A similar pattern of alpha -helicity loss is observed whether the peptide is adsorbed onto anionic or cationic colloidal silica, despite inverse orientations; significant alpha -helicity loss occurs within the central alanine segment and the terminal arginine segment, whereas alpha -helicity is retained in the aspartate segment. This pattern of adsorption-induced conformational change illustrates the complex and subtle balance among the intramolecular and intermolecular factors that influence the conformations of adsorbed peptides and proteins.

Sensitivity-enhanced static 15N NMR of solids by 1h indirect detection

A method for enhancing the sensitivity of 15N spectra of nonspinning solids through 1H indirect detection is introduced. By sampling the 1H signals in the windows of a pulsed spin-lock sequence, high-sensitivity 1H spectra can be obtained in two-dimensional (2D) spectra whose indirect dimension yields the 15N chemical shift pattern. By sacrificing the 1H chemical shift information, sensitivity gains of 1.8 to 2.5 for the 15N spectra were achieved experimentally. A similar sensitivity enhancement was also obtained for 2D (15)N-(1)H dipolar and 15N chemical shift correlation spectroscopy, by means of a 3D 1H/15N-1H/15N correlation experiment. We demonstrate this technique, termed PRINS for proton indirectly detected nitrogen static NMR, on a crystalline model compound with long 1H T(1rho) and on a 25-kDa protein with short 1H T(1rho). This 1H indirect detection approach should be useful for enhancing the sensitivity of 15N NMR of oriented membrane peptides. It can also be used to facilitate the empirical optimization of 15N-detected experiments where the inherent sensitivity of the sample is low.