Design of Two-Dimensional Crystals as Models for Probing the Structure of the Solid-Liquid Interface

Massive Vacancy Concentration Yields Strong Room-Temperature Ferromagnetism in Two-Dimensional ZnO

Two-dimensional (2D) ZnO nanosheets with highly concentrated Zn vacancies (V_Zn) of up to approximately 33% were synthesized by ionic layer epitaxy at the water-toluene interface. This high cation vacancy concentration is unprecedented for ZnO and may provide unique opportunities to realize exotic properties not attainable in the conventional bulk form. After annealing, the nanosheets showed characteristic magnetic hysteresis with saturation magnetization of 57.2 emu/g at 5 K and 50.9 emu/g at room temperature. This value is 1 order of magnitude higher than other ZnO nanostructures and comparable to the conventional ferrimagnetic Fe₃O₄. Density functional theory calculations, with the support of experimental results, suggest that a high concentration of V_Zn (approximately one-third of the Zn sites) can form spontaneously during synthesis when stabilized by H ions, and the formation of V_Zn could be further facilitated by the presence of grain boundaries. It is essential to remove the H for the nanosheets to show ferromagnetism. The mechanisms identified for the origin of the high magnetism in ZnO nanosheets presents an intriguing example of a kinetically stabilized, non-equilibrium, highly defective 2D nanomaterial with a significantly enhanced physical property.

Hydrogen-Bonded Monolayers and Interdigitated Multilayers at the Air−Water Interface

Crystalline monolayers of octadecylsulfonate amphiphiles (C18S) separated by hydrophilic guanidinium (G) spacer molecules were formed at the air-water interface at a surface coverage that was consistent with that expected for a fully condensed monolayer self-assembled by hydrogen bonding between the G ions and the sulfonate groups. The surface pressure-area isotherms reflected reinforcement of this monolayer by hydrogen bonding between the G ions and the sulfonate groups, and grazing incidence X-ray diffraction (GIXD) measurements, performed in-situ at the air-water interface, revealed substantial tilt of the alkyl hydrophobes (t = 49 degrees with respect to the surface normal), which allowed the close packing of the C18 chains needed for a stable crystalline monolayer. This property contrasts with behavior observed previously for monolayers of hexadecylbiphenylsulfonate (C16BPS) and G, which only formed crystallites upon compression, accompanied by ejection of the G ions from the air-water interface. Upon compression to higher surface pressures, GIXD revealed that the highly tilted (G)C18S monolayer crystallites transformed to a self-interdigitated (G)C18S crystalline multilayer accompanied by a new crystalline monolayer phase with slightly tilted alkyl chains and disordered sulfonate headgroups. This transformation was dependent on the rate of compression, suggesting kinetic limitations for the "zipper-like" transformation from the crystalline monolayer to the self-interdigitated (G)C18S crystalline multilayer.

Langmuir monolayer approaches to protein recognition through molecular imprinting

Surface plasmon resonance (SPR) spectroscopy and atomic force microscopy (AFM) have been employed to investigate ferritin adsorption to binary surfactant monolayers of cationic dioctadecyldimethylammonium bromide (DOMA) and non-ionic methyl stearate (SME). Surfactant molar ratios, miscibility, and lateral mobility were controlled to define the number, size, and distribution of "binding sites" for ferritin, which under the low ionic strength conditions investigated, adsorbed to the monolayers predominantly through electrostatic interactions. Successive adsorption/desorption cycles revealed that fluid monolayers, capable of laterally restructuring during the initial protein adsorption event, bound up to 60% more ferritin (dependent on SME:DOMA ratios) as compared to monolayers that were immobilized on a hydrophobic support during this first adsorption step. The enhanced binding of ferritin to fluid monolayers was accentuated in films having non-ionic SME as the principal component. These findings support the premise that the surfactants reorganize to form favorable interactions with an adsorbing protein, leading to protein specific charge patterns, or templates, in the films. Template assessment, however, was complicated by the presence of an irreversibly bound protein fraction, which AFM revealed to be locally ordered protein clusters.

Structural Characterization of Crystalline Ternary Inclusion Compounds at the Air−Water Interface

Crystalline ternary inclusion monolayers consisting of a two-dimensional hydrogen-bonded host network of guanidinium (G) ions and organosulfonate (S) amphiphiles, and biphenylalkane guests, can be generated at the air-water interface through synergistic structural enforcement by hydrogen bonding and host-guest packing. Surface pressure-area isotherms of the 4'-hexadecylbiphenyl-4-sulfonate (C16BPS) amphiphile in the presence of G, with or without guest, are characterized by lift-off molecular areas expected for the GS sheet based on single-crystal X-ray structures of homologous bulk crystals. Intercalation of biphenylalkane guests (4-C(n)()H(2)(n)()(+1)-C(6)H(4)-C(6)H(5), n = 1, 4, 6, 10, 16; denoted CnBP) between organosulfonate hydrophobes, which define pocketlike cavities in the GS monolayer host, afford ternary inclusion monolayers with a 1:1 host-guest stoichiometry. These inclusion monolayers are less compressible than the guest-free host, consistent with dense packing of the biphenylalkane moieties of the host and the biphenylalkane guests. The inclusion monolayers are distinguished from the amorphous guest-free host and from selected guanidinium-free mixed monolayers by structural characterization with grazing-angle incidence X-ray diffraction (GIXD). The GIXD data for the ternary (G)C16BPS:C16BP and (G)C16BPS:C6BP inclusion monolayers obtained upon compression are consistent with a rectangular unit cell. The dimensions of these unit cells and refinement of the GIXD data suggest a "rotated shifted ribbon" GS hydrogen-bonding motif similar to that observed in some bulk GS crystals, including (G)(ethylbiphenylsulfonate). GIXD reveals that (G)C16BPS:C16BP and (G)C16BPS:C6BP are more crystalline than the corresponding guanidinium-free mixed monolayers. The (G)C16BPS:C6BP inclusion monolayer is stable upon compression, even though the alkyl-alkyl host-guest interactions are reduced due to the shorter hexyl substituents of the guest, demonstrating an important reinforcing role for the hydrogen-bonded GS sheet. The structure of a C16BPS:tetracosane (C24) mixed monolayer is independent of G; the unit cell symmetry and dimensions suggest a structure governed by alkyl-alkane interactions that prohibit formation of a GS network. These results illustrate that the existence of ternary inclusion monolayers with an intact GS network requires guest molecules that are structurally homologous with the hydrophobes of the host, in this case biphenylalkanes. The observation of these inclusion compounds suggests an approach for introducing functional nonamphiphilic molecules to an air-water interface through inclusion in a well-defined host.

Urease and hexadecylamine-urease films at the air-water interface: an x-ray reflection and grazing incidence x-ray diffraction study

We report the results of surface x-ray scattering measurements performed on urease and hexadecylamine-urease films at the air-aqueous solution interface. It is demonstrated that although hexadecylamine does not form a stable monolayer on the pure aqueous surface, it does self-assemble into a stable, well-organized structure when spread on top of a urease film at the air-water interface. It is also likely that protein and hexadecylamine domains coexist at the interface.