Electrodeposition of epitaxial Cu(111) thin films on Au(111) using defect-mediated growth

Ag Nanoparticles@Au Nanograting Array as a 3D Flexible and Effective Surface-Enhanced Raman Scattering Substrate

Surface-enhanced Raman scattering (SERS) is a powerful analytical technique for chemical identification, but it remains a great challenge to realize the large-scale and well-controlled fabrication of sensitive and repeatable SERS substrates. Here, we report a facile strategy to fabricate centimeter-sized periodic Au nanograting (Au-NG) decorated with well-arranged Ag nanoparticles (Ag-NPs) (denoted as Ag-NPs@Au-NG) as a three-dimensional (3D) flexible hybrid SERS substrate with high sensitivity and good reproducibility. The Au-NG patterns with periodic ridges and grooves are fabricated through nanoimprint lithography by employing a low-cost digital versatile disc (DVD) as a master mold, and the Ag-NPs are assembled by a well-controlled interface self-assembly method without any coupling agents. Multiple coupling electromagnetic field effects are created at the nanogaps between the Ag-NPs and Au-NG patterns, leading to high-density and uniform hot spots throughout the substrate. As a result, the Ag-NPs@Au-NG arrays demonstrate an ultrahigh SERS sensitivity as low as 10-13 M for rhodamine 6G with a high average enhancement factor (EF) of 1.85 × 108 and good signal reproducibility. For practical applications, toxic organic pollutants including crystal violet, thiram, and melamine have been successfully detected with high sensitivity at a low detection limit, showing a good perspective in the rapid detection of toxic organic pollutants.

Single [0001]-oriented zinc metal anode enables sustainable zinc batteries

The optimization of crystalline orientation of a Zn metal substrate to expose more Zn(0002) planes has been recognized as an effective strategy in pursuit of highly reversible Zn metal anodes. However, the lattice mismatch between substrate and overgrowth crystals has hampered the epitaxial sustainability of Zn metal. Herein, we discover that the presence of crystal grains deviating from [0001] orientation within a Zn(0002) metal anode leads to the failure of epitaxial mechanism. The electrodeposited [0001]-uniaxial oriented Zn metal anodes with a single (0002) texture fundamentally eliminate the lattice mismatch and achieve ultra-sustainable homoepitaxial growth. Using high-angle angular dark-filed scanning transmission electron microscopy, we elucidate the homoepitaxial growth of the deposited Zn following the "~ABABAB~" arrangement on the Zn(0002) metal from an atomic-level perspective. Such consistently epitaxial behavior of Zn metal retards dendrite formation and enables improved cycling, even in Zn||NH4V4O10 pouch cells, with a high capacity of 220 mAh g-1 for over 450 cycles. The insights gained from this work on the [0001]-oriented Zn metal anode and its persistently homoepitaxial mechanism pave the way for other metal electrodes with high reversibility.

Epitaxial Electrocrystallization of Magnesium via Synergy of Magnesiophilic Interface, Lattice Matching, and Electrostatic Confinement

Rechargeable magnesium batteries are particularly advantageous for renewable energy storage systems. However, the inhomogeneous Mg electrodeposits greatly shorten their cycle life under practical conditions. Herein, the epitaxial electrocrystallization of Mg on a three-dimensional magnesiophilic host is implemented via the synergy of a magnesiophilic interface, lattice matching, and electrostatic confinement effects. The vertically aligned nickel hydroxide nanosheet arrays grown on carbon cloth (abbreviated as "Ni(OH)₂@CC") have been delicately designed, which satisfy the essential prerequisite of a low lattice geometrical misfit with Mg (about 2.8%) to realize epitaxial electrocrystallization. Simultaneously, the ionic crystal nature of Ni(OH)₂ displays a periodic and hillock-like electrostatic potential field over its exposed facets, which can precisely capture and confine the reduced Mg⁰ species onto the local electron-enriched sites at the atomic level. The Ni(OH)₂@CC substrate undergoes sequential Mg-ion intercalation, underpotential deposition, and electrocrystallization processes, during which the uniform, lamellar Mg electrodeposits with a locked crystallographic orientation are formed. Under practical conditions (10 mA cm^-2 and 10 mAh cm^-2), the Ni(OH)₂@CC substrate exhibits stable Mg stripping/plating cycle performances over 600 h, 2 orders of magnitude longer than those of the pristine copper foil and carbon cloth substrates.

Polymorph Evolution Mechanisms and Regulation Strategies of Lithium Metal Anode under Multiphysical Fields

Lithium (Li) metal, a typical alkaline metal, has been hailed as the "holy grail" anode material for next generation batteries owing to its high theoretical capacity and low redox reaction potential. However, the uncontrolled Li plating/stripping issue of Li metal anodes, associated with polymorphous Li formation, "dead Li" accumulation, poor Coulombic efficiency, inferior cyclic stability, and hazardous safety risks (such as explosion), remains as one major roadblock for their practical applications. In principle, polymorphous Li deposits on Li metal anodes includes smooth Li (film-like Li) and a group of irregularly patterned Li (e.g., whisker-like Li (Li whiskers), moss-like Li (Li mosses), tree-like Li (Li dendrites), and their combinations). The nucleation and growth of these Li polymorphs are dominantly dependent on multiphysical fields, involving the ionic concentration field, electric field, stress field, and temperature field, etc. This review provides a clear picture and in-depth discussion on the classification and initiation/growth mechanisms of polymorphous Li from the new perspective of multiphysical fields, particularly for irregular Li patterns. Specifically, we discuss the impact of multiphysical fields' distribution and intensity on Li plating behavior as well as their connection with the electrochemical and metallurgical properties of Li metal and some other factors (e.g., electrolyte composition, solid electrolyte interphase (SEI) layer, and initial nuclei states). Accordingly, the studies on the progress for delaying/suppressing/redirecting irregular Li evolution to enhance the stability and safety performance of Li metal batteries are reviewed, which are also categorized based on the multiphysical fields. Finally, an overview of the existing challenges and the future development directions of metal anodes are summarized and prospected.

Regulating electrodeposition morphology of lithium: towards commercially relevant secondary Li metal batteries

Rational approaches for achieving fine control of the electrodeposition morphology of Li are required to create commercially-relevant rechargeable Li metal batteries.

Reversible epitaxial electrodeposition of metals in battery anodes

The propensity of metals to form irregular and nonplanar electrodeposits at liquid-solid interfaces has emerged as a fundamental barrier to high-energy, rechargeable batteries that use metal anodes. We report an epitaxial mechanism to regulate nucleation, growth, and reversibility of metal anodes. The crystallographic, surface texturing, and electrochemical criteria for reversible epitaxial electrodeposition of metals are defined and their effectiveness demonstrated by using zinc (Zn), a safe, low-cost, and energy-dense battery anode material. Graphene, with a low lattice mismatch for Zn, is shown to be effective in driving deposition of Zn with a locked crystallographic orientation relation. The resultant epitaxial Zn anodes achieve exceptional reversibility over thousands of cycles at moderate and high rates. Reversible electrochemical epitaxy of metals provides a general pathway toward energy-dense batteries with high reversibility.

Electroless Deposition of Pb Monolayer: A New Process and Application to Surface Selective Atomic Layer Deposition

The present work demonstrates an electroless (e-less) deposition of Pb monolayer on Au and Cu surface whose morphology and properties resemble its underpotentially deposited counterpart. Our results and analysis show that the e-less Pb monolayer deposition is a surface selective, surface controlled, self-terminating process. Results also show that the electroless Pb monolayer deposition is enabling a phenomenon for new deposition method called "electroless atomic layer deposition" (e-less ALD). Here, the e-less Pb monolayer serves as reducing agent and sacrificial material in surface limited redox replacement reaction with noble metal ions such as Pt ⁿ⁺, i.e., Pt deposition. The e-less ALD is highly selective to the metal substrates at which Pb forms the e-less monolayer. The full e-less ALD cycle leads to an overall deposition of a controlled amount of the noble metal. Repetition of the two-step e-less ALD cycle an arbitrary number of times leads to formation of a highly compact, smooth, and conformal noble metal thin film with applications spanning from catalyst synthesis to semiconductor technology. The process is designed for (but not limited to) aqueous solutions that can be easily scaled up to any size and shape of the substrate, deeming its wide applications.