A Liquid Derivative of 12-Tungstophosphoric Acid with Unusually High Conductivity

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Polyoxometalate-based ionic liquids: efficient reversible phase transformation-type catalysts for thiolation of alcohols to construct C-S bonds

As important building blocks in natural products and organic synthesis, thioethers have a wide range of potential applications. Herein, polyoxometalate-based ionic liquids (POM-ILs-SO3H) derived from N-alkyl imidazole were synthesized and used for the first time for the thiolation of alcohols to construct C-S bonds in a series of benzyl thioethers. This type of POM-ILs-SO3H catalyst exhibited high catalytic activity, providing up to 98% yield of thioether within 1 h at 70 °C. The alkyl chain length of the imidazole had a certain effect on the solubility of the POM-ILs-SO3H catalysts in the reaction solvent, and then affected their catalytic activity. The catalytic system had a wide substrate scope and was suitable for the reaction of tertiary and secondary benzyl alcohols with thiophenols or cycloalkyl thiols. In particular, [PIMPS]3PW12O40 (PIM = 1-propylimidazole, PS = propane sulfonate) as a reversible phase transformation-type catalyst, combining the advantages of homogeneous and heterogeneous catalysts, exhibited high activity and good recyclability with only a slight decrease in the yield after five runs. Additionally, a carbocation mechanism was proposed for the thiolation reaction of alcohols.

Post transition metal substituted Keggin-type POMs as thin film chemiresistive sensors for H2O and CO2 detection

Chemiresitive sensing allows the affordable and facile detection of small molecules such as H2O and CO2. Herein, we report a novel class of Earth-abundant post transition metal substituted Keggin polyoxometalates (POMs) for chemiresistive sensing applications, with conductivities up to 0.01 S cm-1 under 100% CO2 and 65% Relative Humidity (RH).

Imidazolium Triflate Ionic Liquids' Capacitance-Potential Relationships and Transport Properties Affected by Cation Chain Lengths

In this paper we report the effects of five imidazolium cations with varying alkyl chain lengths to study the effects of cation size on capacitance versus voltage behavior. The cations include ethyl-, butyl-, hexyl-, octyl-, and decyl-3-methylimidazolium, all paired with a triflate anion. We analyze the capacitance with respect to the cation alkyl chain length qualitatively and quantitatively by analyzing changes in the capacitance-potential curvature shape and magnitude across several standard scanning protocols and electrochemical techniques. Further, three transport properties (viscosity, diffusion coefficient, and electrical conductivity) are experimentally determined and integrated into the outcomes. Ultimately, we find higher viscosities, lower diffusion coefficients, and lower electrical conductivities when the alkyl chain length is increased. Also, capacitance values increase with cation size, except 1-octyl-3-methylimidazolium, which does not follow an otherwise linear trend. This capacitive increase is most pronounced when sweeping the potential in the cathodic direction. These findings challenge the conventional hypothesis that increasing the length of the alkyl chain of imidazolium cations diminishes the capacitance and ionic liquid performance in charge storage.

Effective Epoxidation of Fatty Acid Methyl Esters with Hydrogen Peroxide by the Catalytic System H3PW12O40/Quaternary Phosphonium Salts

Six quaternary phosphonium salts (QPSs) in combination with phosphotungstic heteropolyacid, H3PW12O40, were tested in the epoxidation of rapeseed oil fatty acid methyl esters with a hydrogen peroxide aqueous solution. The QPSs consisted of trihexyl(tetradecyl)phosphonium [P6], tributyl-tetradecylphosphonium [P4] or tetraoctylphosphonium [P8] cation and different anions—chloride (Cl−), bromide (Br−), tetrafluoroborate (BF4−), bis(trifluoromethylsulfonyl)amide (NTf2−), bis(2,4,4-trimethyl-pentyl)phosphinate (Phosf−). The influence of the kind of QPS and temperature on the epoxy number, iodine number, glycol content has been determined. The epoxidation was confirmed using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) and elemental analysis CHO. Two QPSs with a trihexyltetradecyphosphonium cation—[P6][Fosf] and [P6][Cl]—were selected as the most effective in the studied epoxidation process. The proposed kinetic model takes into consideration the two reactions, namely, epoxidation and epoxy ring opening involving the formation of hydroxyl groups. The rate constants and activation energies for epoxidation fatty acid methyl esters were determined.

High Proton-Conductivity in Covalently Linked Polyoxometalate-Organoboronic Acid-Polymers

The controlled bottom-up design of polymers with metal oxide backbones is a grand challenge in materials design, as it could give unique control over the resulting chemical properties. Herein, we report a 1D-organo-functionalized polyoxometalate polymer featuring a purely inorganic backbone. The polymer is self-assembled from two types of monomers, inorganic Wells-Dawson-type polyoxometalates, and aromatic organo-boronates. Their covalent linkage results in 1D polymer strands, which combine an inorganic oxide backbone (based on B-O and Nb-O linkages) with functional organic side-chains. The polymer shows high bulk proton conductivity of up to 1.59×10-1  S cm-1 at 90 °C and 98 % relative humidity. This synthetic approach could lead to a new class of organic-inorganic polymers where function can be designed by controlled tuning of the monomer units.

Ultrahigh Proton Conduction via Extended Hydrogen-Bonding Network in a Preyssler-Type Polyoxometalate-Based Framework Functionalized with a Lanthanide Ion

The exploration of composition-structure-function relationship in proton-conducting solids remains a challenge in materials chemistry. Polyoxometalate-based compounds have been long considered as candidates for proton conductors; however, their low structural stability and a large decrease in conductivity under reduced relative humidity (RH) have limited their applications. To overcome such limitations, the hybridization of polyoxometalates with proton-conducting polymers has emerged as a promising method. Besides, 4f lanthanide ions possess a high coordination number, which can be utilized to attract water molecules and to build robust frameworks. Herein, a Preyssler-type polyoxometalate functionalized with a 9-coordinate Eu³⁺ (Eu[P₅W₃₀O₁₁₀K]^11-) is newly synthesized and combined with poly(allylamine) with amine moieties as protonation sites. The resulting robust crystalline composite exhibits an ultrahigh proton conductivity >10^-2 S cm^-1 at 368 K and 90% RH, which is still >10^-3 S cm^-1 at 50% RH, due to the strengthened and extended hydrogen-bonding network.

Molecular Vanadium Oxides for Energy Conversion and Energy Storage: Current Trends and Emerging Opportunities

Molecular vanadium oxides, or polyoxovanadates (POVs), have recently emerged as a new class of molecular energy conversion/storage materials, which combine diverse, chemically tunable redox behavior and reversible multielectron storage capabilities. This Review explores current challenges, major breakthroughs, and future opportunities in the use of POVs for energy conversion and storage. The reactivity, advantages, and limitations of POVs are explored, with a focus on their use in lithium and post-lithium-ion batteries, redox-flow batteries, and light-driven energy conversion. Finally, emerging themes and new research directions are critically assessed to provide inspiration for how this promising materials class can advance research in sustainable energy technologies.

Metal-Based Ionic Liquids in Oxidative Desulfurization: A Critical Review

Ionic liquids (ILs) as novel functional desulfurization materials have attracted increasing attentions. Metal-based ionic liquids (MILs) are classified into three types of metal chloride ILs, metal oxide ILs, and metal complex ILs based on the definition and basic structure of MILs in this critical review. On the basis of the properties of ILs such as structure designability, super dissolution performance, good thermal and chemical stability, nonflammability, and wide electrochemical window, MILs exhibit unique advantages on hydrophobicity, oxidation performance, and Brönsted-Lewis acidity. Therefore, MILs possess both the absorption and oxidation centers for the intramolecular adsorption and oxidation to improve the oxidative desulfurization (ODS) process. During the novel nonaqueous wet oxidative desulfurization process (Nasil), H₂S can be oxidized into elemental sulfur with hydrophobic MILs, which can be regenerated by oxygen for recycle, to solve the problems of low sulfur capacity, low sulfur quality, and severe secondary pollution in the aqueous Lo-Cat wet oxidative desulfurization process. Another outstanding feature of MILs in ODS is biomimetic catalysis, which has the function of activating molecular oxygen and improving the oxidation performance. Metal oxide ILs and metal complex ILs are used in combination with hydrogen peroxide or oxygen with the existing water to generate a Fenton-like reaction to convert hydrophobic organic sulfur or SO₂ into hydrophilic sulfoxide/sulfone or sulfur acid, respectively. However, the corrosion of Cl^- to the equipment and emulsification phenomenon in the extraction process of sulfoxide/sulfone separation still need further study. Furthermore, the promising strategies to construct highly efficient and green desulfurization processes for large-scale applications are provided.

A molecular dynamics study on magnetic imidazolium-based ionic liquids: the effect of an external magnetic field

In this paper, we have reported a molecular dynamics (MD) study on the properties of three different magnetic imidazolium-based ionic liquids in the absence and presence of an external magnetic field. In this regard, the volumetric properties such as density and isobaric expansion coefficient, dynamical properties, namely, viscosity, mean square displacement of ions, diffusion coefficients, transport numbers of cations and anions, and electrical conductivity, and structural properties such as radial distribution function (RDF) and spatial distribution function (SDF) of [emim][FeCl4], [bmim][FeCl4] and [hmim][FeCl4] have been studied at different temperatures using molecular dynamics simulations. After studying the different volumetric, structural, and dynamical properties of the above-mentioned magnetic ILs in the absence of a magnetic field, we investigated the effect of an external magnetic field on the structural properties of one of these systems, i.e., [bmim][FeCl4]. In this regard, we established different contributions in the interactions between the external magnetic field and the studied magnetic ionic liquid (MIL). The number density profiles of the studied MIL before and after imposing an external magnetic field of 1.5 T showed a significant variation in the molecular distribution. The results indicated that the external magnetic field reduced the intensity of RDFs due to the reduction in the interactions between different ion sites as a result of changes in their orientations. After applying the external magnetic field, it was observed that due to the oppositely directed forces on the cations and anions, they moved in opposite directions. The snapshots showed that the static motion of the anion was smaller because of its small size. In the presence of an external magnetic field, the ions distributed more homogeneously compared to that observed in the absence of this field. The results of this study can be used in the rational and accurate design of viscomagnetic fluids and reaction systems in the presence and absence of magnetic fields.

Water Purification and Microplastics Removal Using Magnetic Polyoxometalate-Supported Ionic Liquid Phases (magPOM-SILPs)

Filtration is an established water‐purification technology. However, due to low flow rates, the filtration of large volumes of water is often not practical. Herein, we report an alternative purification approach in which a magnetic nanoparticle composite is used to remove organic, inorganic, microbial, and microplastics pollutants from water. The composite is based on a polyoxometalate ionic liquid (POM‐IL) adsorbed onto magnetic microporous core–shell Fe₂O₃/SiO₂ particles, giving a magnetic POM‐supported ionic liquid phase (magPOM‐SILP). Efficient, often quantitative removal of several typical surface water pollutants is reported together with facile removal of the particles using a permanent magnet. Tuning of the composite components could lead to new materials for centralized and decentralized water purification systems.

Dimensional Control in Polyoxometalate Crystals Hybridized with Amphiphilic Polymerizable Ionic Liquids

Ionic liquids are an important component for constructing functional materials, and polyxometalate cluster anion is a promising partner for building inorganic-organic hybrid materials comprising ionic liquids. In such hybrid materials, the precise control of the molecular arrangement in the bulk structures is crucial for the emergence of characteristic functions, which can be realized by introducing an amphiphilic moiety into the ionic liquids. Here, an amphiphilic polymerizable imidazolium ionic liquid with a methacryloyl group was firstly hybridized with polyoxometalate anions of octamolybdate ([Mo₈O₂₆]^4-, Mo₈) and silicotungstate ([SiW₁₂O₄₀]^4-, SiW₁₂) to obtain inorganic-organic hybrid crystals. The polymerizable ionic liquid with a octyl chain (denoted as MAImC₈) resulted in the formation of anisotropic molecular arrangements in the bulk crystal structure, which was compared with the hybrid crystals composed from the polymerizable ionic liquid without a long alkyl chain (denoted as MAIm). Rather densely packed isotropic molecular arrangements were observed in the hybrid crystals of MAIm-Mo₈ and MAIm-SiW₁₂ due to the lack of the amphiphilic moiety. On the other hand, using the amphiphilic MAImC₈ cation gave rise to a honeycomb-like structure with the Mo₈ anion and a layered structure with the SiW₁₂ anion, respectively.

Energy storage inspired by nature - ionic liquid iron-sulfur clusters as electrolytes for redox flow batteries

The redox flow battery (RFB) is a promising technology for the storage of electric energy. Many commercial RFBs are often based on acidic vanadium electrolyte solutions that have limitations regarding stability and energy density. Here, a new approach is presented that is inspired by nature's electron storage, i.e. iron-sulfur clusters [Fe4S4(SR)4]2-. In combination with imidazolium cations, new ionic liquid electrolyte materials were obtained and characterized with regard to their physico- and electrochemical properties. For flow battery tests, the bromide/bromine redox-couple was used in the second half cell in an ionic liquid solution. In these measurements, liquid iron-sulfur clusters show high coulombic (>95%) and energy (69%) efficiencies combined with a high theoretical energy density (88 W h L-1).

Catalytic synthesis of chloroacetates with thermoregulated ionic liquids based on vanadium-substituted polyoxometalate

A series of polyoxometalate-based ionic liquid (POM-IL) catalysts with functional sulfonic acid groups, [TEAPS]_3+nPW_12−nV_nO₄₀ (n = 1, 2, 3) were synthesized and characterized by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectrophotometry (FT-IR), UV-Vis spectrophotometry (UV), potentiometric titration and thermogravimetry-differential scanning calorimetry (TG-DSC). The catalytic ability and reusability of the POM-IL catalysts were evaluated on esterification of chloroacetic acid and n-amyl alcohol. The optimum reaction conditions, 0.2 g of the catalyst amount, 10 mL of water carrier, 140 °C of reaction temperature, and 1.2/1 of the molar ratio of alcohol/acid, were obtained by an orthogonal test. [TEAPS]₅PW₁₀V₂O₄₀ was found to be the best active catalyst with an esterification rate of 98.75% and could be reused five times without significant decrease in activity. The ionic liquid acted as a temperature-responsive catalyst, forming a homogeneous mixture with the reactants at reaction temperature, and could be precipitated and separated from products when the reaction ends at ambient temperature. Therefore, an environmentally friendly and highly efficient approach for the synthesis of chloroacetates is provided.

The ionic liquid catalyst [TEAPS]₅PW₁₀V₂O₄₀ exhibited good activity and reusability in the esterification process owing to its acidity and thermoregulated properties.

Controlled introduction of metal cations into polymerizable ionic liquid-polyoxomolybdate hybrid crystals

The first syntheses of polyoxomolybdate hybrid crystals were achieved by using polymerizable ionic-liquid.

Polyoxometalate-Ionic Liquids (POM-ILs) as Anticorrosion and Antibacterial Coatings for Natural Stones

Corrosion of stone by acid rain and deterioration from biofilms are global problems for industrial and residential buildings as well as cultural heritage, such as statues or historic buildings. Herein we show how typical building stones can be protected from corrosion ("weathering") and biofilm formation ("biodeterioration") by application of thin films of polyoxometalate-based ionic liquids (POM-ILs). Stone samples are coated with hydrophobic, acid resistant POM-ILs featuring biocidal properties. Exposure of the samples to simulated acid rain showed negligible corrosion compared to the significant deterioration of unprotected samples; in addition the biocidal properties of the POM-ILs suppress the formation of biofilms on coated stone slabs. A new class of modular molecular materials for protecting stones can now be developed for use in construction, environmental protection, and cultural heritage preservation.

Structure and Dynamics of Polymeric Canopies in Nanoscale Ionic Materials: An Electrical Double Layer Perspective

Nanoscale ionic materials (NIMs) are an emerging class of materials consisting of charged nanoparticles and polymeric canopies attaching to them dynamically by electrostatic interactions. Using molecular simulations, we examine the structure and dynamics of the polymeric canopies in model NIMs in which the canopy thickness is much smaller than the nanoparticle diameter. Without added electrolyte ions, the charged terminal groups of polymers adsorb strongly on charged walls, thereby electrostatically "grafting" polymers to the wall. These polymers are highly stretched. They rarely desorb from the wall, but maintain modest in-plane mobility. When electrolyte ion pairs are introduced, the counterions adsorb on the wall, causing some electrostatically "grafted" polymers to desorb. The desorbed polymers, however, are less than the adsorbed counter-ions, which leads to an overscreening of wall charges. The desorbed polymers' charged terminal groups do not distribute uniformly across the canopy but are depleted in some regions; they adopt conformation similar to those in bulk and exchange with the "grafted" polymers rapidly, hence dilating the canopy and accelerating its dynamics. We understand these results by taking the canopy as an electrical double layer, and highlight the importance of the interplay of electrostatic and entropic effects in determining its structure and dynamics.

Synthesis and conductive performance of polyoxometalate acid salt gel electrolytes

Two vanadium-substituted polyoxometalate acid salt gel electrolytes, [PyPS]₃H₄SiW₉V₃O₄₀ and [PyPS]₅H₂SiW₉V₃O_40, have been synthesized using a 1-(3-sulfonic group) propylpyridine (PyPS) and a Keggin vanadium-substituted heteropoly acid H₇SiW₉V₃O₄₀ through an ionic self-assembly method, and adjusting the ratio of cation and anion. A substitution effect of the acid salt gel electrolytes has been investigated. Interestingly, when protons of the polyoxometalate acid salt gel electrolytes are substituted, both the conductivity and the phase transformation temperature increase. The fastest conductivity of these gel electrolytes was as high as 2.57 × 10⁻² S cm⁻¹ at 110 °C.

Synthesis and conductive performance of two vanadium-substituted polyoxometalate acid salt gel electrolytes, [PyPS]₃H₄SiW₉V₃O₄₀ and [PyPS]₅H₂SiW₉V₃O₄₀, have been reported.

Heterogeneous catalysis by tungsten-based heteropoly compounds

In this review, the recent works on heterogeneous catalytic applications of polyoxotungstates in liquid-phase organic reactions are reviewed.

An Efficient, Eco-friendly and Sustainable One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones Directly from Alcohols Catalyzed by Heteropolyanion-Based Ionic Liquids

Efficient, eco-friendly and sustainable access to 3,4-dihydropyrimidin-2(1H)-ones directly from alcohols under microwave and solvent-free conditions has been reported. The practical protocol involves heteropolyanion-based catalyzed oxidation of alcohols to aldehydes with NaNO₃ as the oxidant followed by cyclocondensation with dicarbonyl compounds and urea or thiourea in a two-step, one-pot manner. Compatibility with different functional groups, good to excellent yields and reusable catalysts are the main highlights. The utilization of alcohols instead of aldehydes is a valid and green alternative to the classical Biginelli reaction.

Polymerizable Ionic Liquid Crystals Comprising Polyoxometalate Clusters toward Inorganic-Organic Hybrid Solid Electrolytes

Solid electrolytes are crucial materials for lithium-ion or fuel-cell battery technology due to their structural stability and easiness for handling. Emergence of high conductivity in solid electrolytes requires precise control of the composition and structure. A promising strategy toward highly-conductive solid electrolytes is employing a thermally-stable inorganic component and a structurally-flexible organic moiety to construct inorganic-organic hybrid materials. Ionic liquids as the organic component will be advantageous for the emergence of high conductivity, and polyoxometalate, such as heteropolyacids, are well-known as inorganic proton conductors. Here, newly-designed ionic liquid imidazolium cations, having a polymerizable methacryl group (denoted as MAImC₁), were successfully hybridized with heteropolyanions of [PW₁₂O₄₀]^3- (PW₁₂) to form inorganic-organic hybrid monomers of MAImC₁-PW₁₂. The synthetic procedure of MAImC₁-PW₁₂ was a simple ion-exchange reaction, being generally applicable to several polyoxometalates, in principle. MAImC₁-PW₁₂ was obtained as single crystals, and its molecular and crystal structures were clearly revealed. Additionally, the hybrid monomer of MAImC₁-PW₁₂ was polymerized by a radical polymerization using AIBN as an initiator. Some of the resulting inorganic-organic hybrid polymers exhibited conductivity of 10^-4 S·cm^-1 order under humidified conditions at 313 K.

Thermoresponsive Polyoxometalate/Ionic Liquid Supramolecular Gel Electrolytes for Supercapacitors: Fabrication, Structure, and Heteropolyanion Structure Effect

We report the fabrication, structure, and heteropolyanion structure effect of polyoxometalate (POM)/ionic liquid (IL) supramolecular gels. These supramolecular gels exhibit ordered structures, as a result of their excellent reversible self-assembly, and they show various physicochemical properties, determined by the heteropolyanion structure effect of POM anions. Specifically, the formation of POM/IL supramolecular gels results in a highly ordered layer-shape structure, which has been calculated using X-ray powder diffraction patterns and proven by transmission electron microscopy images for the first time. When these POM/IL supramolecular gels are heated, they become viscous liquid sols, with melting isotropic drops and even flowerlike structures on microscopic scales, while it undergoes a reversible gel-sol phase transformation from gel to sol. The heteropolyanion structure effect in these two IL gels, [TBTP]₅PW₁₀V₂O₄₀ and [TBTP]₈P₂W₁₆V₂O₆₂, on their physicochemical properties is demonstrated. The POM structures have a strong structure effect on the physicochemical properties. As the size of heteropolyanions increases, there is a significant improvement in the conductivity, thermal performance, and oxidizability, with a lower phase inversion temperature, which means that the Dawson-type compound, [TBTP]₈P₂W₁₆V₂O₆₂, has a higher conductivity, lower melting point, stronger oxidizability, and better thermal performance than the Keggin-type compound, [TBTP]₅PW₁₀V₂O₄₀, under the same conditions.

Solid polymer electrolyte based on ionic bond or covalent bond functionalized silica nanoparticles

This article reports a solid polymer electrolyte based on ionic bond or covalent bond functionalized silica nanoparticles for lithium ion batteries.

Conductive Hybrid Crystal Composed from Polyoxomolybdate and Deprotonatable Ionic-Liquid Surfactant

A polyoxomolybdate inorganic-organic hybrid crystal was synthesized with deprotonatable ionic-liquid surfactant. 1-dodecylimidazolium cation was employed for its synthesis. The hybrid crystal contained δ-type octamolybdate (Mo₈) isomer, and possessed alternate stacking of Mo₈ monolayers and interdigitated surfactant bilayers. The crystal structure was compared with polyoxomolybdate hybrid crystals comprising 1-dodecyl-3-methylimidazolium surfactant, which preferred β-type Mo₈ isomer. The less bulky hydrophilic moiety of the 1-dodecylimidazolium interacted with the δ-Mo₈ anion by N-H···O hydrogen bonds, which presumably induced the formation of the δ-Mo₈ anion. Anhydrous conductivity of the hybrid crystal was estimated to be 5.5 × 10(-6) S·cm(-1) at 443 K by alternating current (AC) impedance spectroscopy.