Engineered holliday junctions as single-molecule reporters for protein-DNA interactions with application to a MerR-family regulator

Nanopore Analysis as a Tool for Studying Rapid Holliday Junction Dynamics and Analyte Binding

Holliday junctions (HJs) are an important class of nucleic acid structure utilized in DNA break repair processes. As such, these structures have great importance as therapeutic targets and for understanding the onset and development of various diseases. Single-molecule fluorescence resonance energy transfer (smFRET) has been used to study HJ structure-fluctuation kinetics, but given the rapid time scales associated with these kinetics (approximately sub-milliseconds) and the limited bandwidth of smFRET, these studies typically require one to slow down the structure fluctuations using divalent ions (e.g., Mg²⁺). This modification limits the ability to understand and model the underlying kinetics associated with HJ fluctuations. We address this here by utilizing nanopore sensing in a gating configuration to monitor DNA structure fluctuations without divalent ions. A nanopore analysis shows that HJ fluctuations occur on the order of 0.1-10 ms and that the HJ remains locked in a single conformation with short-lived transitions to a second conformation. It is not clear what role the nanopore plays in affecting these kinetics, but the time scales observed indicate that HJs are capable of undergoing rapid transitions that are not detectable with lower bandwidth measurement techniques. In addition to monitoring rapid HJ fluctuations, we also report on the use of nanopore sensing to develop a highly selective sensor capable of clear and rapid detection of short oligo DNA strands that bind to various HJ targets.

Dissection of Interaction Kinetics through Single-Molecule Interaction Simulation

The ability to extract kinetic interaction parameters from single-molecule fluorescence resonance energy transfer trajectories without the need for solving complex single-molecule differential equations has the potential to address some of the critical biophysical questions. Here, we provide a noise-free single-molecule interaction simulation (SMIS) tool to give the expected dwell-time distributions and relative populations of each FRET level based on the assigned kinetic model and to dissect kinetic interaction parameters from single-molecule FRET trajectories. The method provides the expected dwell-time distributions, average transition rates, and relative populations of each FRET level based on the assigned kinetic model. By comparing with ground truth data and experimental data, we demonstrated that SMIS is useful to quantify the interaction kinetic rate constants without using the traditional single-molecule analytical solution approach.

Direct observation of the external force mediated conformational dynamics of an IHF bound Holliday junction

We have investigated the isomerization dynamics and plausible energy landscape of 4-way Holliday junctions (4WHJs) bound to integration host factor (IHF, a DNA binding protein), considering the effect of applied external force, by single-molecule FRET methods. A slowing down of the forward as well as the backward rates of the isomerization process of the protein bound 4WHJ has been observed under the influence of an external force, which indicates an imposed restriction on the conformational switching. This has also been reflected by an increase in rigidity, as observed from the increase in the single-molecule FRET (smFRET)-anisotropy values (0.270 ± 0.012 to 0.360 ± 0.008). The application of an external force has assisted the conformational transitions to share the unstacked open structure intermediate, with different rate-limiting steps and a huge induced variation in the energy landscape. Furthermore, the associated landscape of the 4WHJ is visualized in terms of rarely interconverting states embedded into the two isoforms by using nonlinear dynamics analysis, which shows that the chaoticity of the system increases at intermediate force (0.4 to 1.6 pN). The identification of chaos in our investigation provides useful information for a comprehensive explanation of the origin of the complex behavior of the system, which effectively helps us to perceive the dynamics of IHF bound 4WHJs under the influence of external force, and also demonstrates the applicability of nonlinear dynamics analysis in the field of biology.

Triple helix conformation-specific blinking of Cy3 in DNA

We report that Cy3 undergoes triple helix conformation-specific blinking in DNA. Blinking patterns were affected by the stabilization of the Hoogsteen base-pair, suggesting that not only the presence but also the fluctuating behaviour of the triple helix can be monitored by the changes in the Cy3 blinking patterns.

Nanopore-based DNA-probe sequence-evolution method unveiling characteristics of protein-DNA binding phenomena in a nanoscale confined space

Almost all of the important functions of DNA are realized by proteins which interact with specific DNA, which actually happens in a limited space. However, most of the studies about the protein-DNA binding are in an unconfined space. Here, we propose a new method, nanopore-based DNA-probe sequence-evolution (NDPSE), which includes up to 6 different DNA-probe systems successively designed in a nanoscale confined space which unveil the more realistic characteristics of protein-DNA binding phenomena. There are several features; for example, first, the edge-hindrance and core-hindrance contribute differently for the binding events, and second, there is an equilibrium between protein-DNA binding and DNA-DNA hybridization.

Extracting physics of life at the molecular level: A review of single-molecule data analyses

Studying individual biomolecules at the single-molecule level has proved very insightful recently. Single-molecule experiments allow us to probe both the equilibrium and nonequilibrium properties as well as make quantitative connections with ensemble experiments and equilibrium thermodynamics. However, it is important to be careful about the analysis of single-molecule data because of the noise present and the lack of theoretical framework for processes far away from equilibrium. Biomolecular motion, whether it is free in solution, on a substrate, or under force, involves thermal fluctuations in varying degrees, which makes the motion noisy. In addition, the noise from the experimental setup makes it even more complex. The details of biologically relevant interactions, conformational dynamics, and activities are hidden in the noisy single-molecule data. As such, extracting biological insights from noisy data is still an active area of research. In this review, we will focus on analyzing both fluorescence-based and force-based single-molecule experiments and gaining biological insights at the single-molecule level. Inherently nonequilibrium nature of biological processes will be highlighted. Simulated trajectories of biomolecular diffusion will be used to compare and validate various analysis techniques.

Single-molecule dynamics and mechanisms of metalloregulators and metallochaperones

Understanding how cells regulate and transport metal ions is an important goal in the field of bioinorganic chemistry, a frontier research area that resides at the interface of chemistry and biology. This Current Topic reviews recent advances from the authors' group in using single-molecule fluorescence imaging techniques to identify the mechanisms of metal homeostatic proteins, including metalloregulators and metallochaperones. It emphasizes the novel mechanistic insights into how dynamic protein-DNA and protein-protein interactions offer efficient pathways via which MerR-family metalloregulators and copper chaperones can fulfill their functions. This work also summarizes other related single-molecule studies of bioinorganic systems and provides an outlook toward single-molecule imaging of metalloprotein functions in living cells.

DNA architectonics: towards the next generation of bio-inspired materials

The use of DNA in nanobiotechnology has advanced to a stage at which almost any two or three dimensional architecture can be designed with high precision. The choice of the DNA sequences is essential for successful self-assembly, and opens new ways of making nanosized monomolecular assemblies with predictable structure and size. The inclusion of designer nucleoside analogues further adds functionality with addressable groups, which have an influence on the function of the DNA nano-objects. This article highlights the recent achievements in this emerging field and gives an outlook on future perspectives and applications.

A DNA-based nanomechanical device used to characterize the distortion of DNA by Apo-SoxR protein

DNA-based nanomechanical devices can be used to characterize the action of DNA-distorting proteins. Here, we have constructed a device wherein two DNA triple-crossover (TX) molecules are connected by a shaft, similar to a previous device that measured the binding free energy of integration host factor. In our case, the binding site on the shaft contains the sequence recognized by SoxR protein, the apo form of which is a transcriptional activator. Another active form is oxidized [2Fe-2S] SoxR formed during redox sensing, and previous data suggest that activated Fe-SoxR distorts its binding site by localized DNA untwisting by an amount that corresponds to ~2 bp. A pair of dyes report the fluorescence resonance energy transfer (FRET) signal between the two TX domains, reflecting changes in the shape of the device upon binding of the protein. The TX domains are used to amplify the signal expected from a relatively small distortion of the DNA binding site. From FRET analysis of apo-SoxR binding, the effect of apo-SoxR on the original TX device is similar to the effect of shortening the TX device by 2 bp. We estimate that the binding free energy of apo-SoxR on the DNA target site is 3.2-6.1 kcal/mol.

Relating dynamic protein interactions of metallochaperones with metal transfer at the single-molecule level

Metallochaperones undertake specific interactions with their target proteins to deliver metal ions inside cells. Understanding how these protein interactions are coupled with the underlying metal transfer process is important, but challenging because they are weak and dynamic. Here we use a nanovesicle trapping scheme to enable single-molecule FRET measurements of the weak, dynamic interactions between the copper chaperone Hahl and the fourth metal binding domain (MBD4) of WDP. By monitoring the behaviors of single interacting pairs, we visualize their interactions in real time in both the absence and the presence of various equivalents of Cu(1+). Regardless of the proteins' metallation state, we observe multiple, interconverting interaction complexes between Hah1 and MBD4. Within our experimental limit, the overall interaction geometries of these complexes appear invariable, but their stabilities are dependent on the proteins' metallation state. In apo-holo Hah1-MBD4 interactions, the complexes are stabilized relative to that observed in the apo-apo interactions. This stabilization is indiscernible when Hah1's Cu(1+)-binding is eliminated or when both proteins have Cu(1+) loaded. The nature of this Cu(1+)-induced complex stabilization and of the interaction complexes are discussed. These Cu(1+)-induced effects on the Hah1-MBD4 interactions provide a step toward understanding how the dynamic protein interactions of copper chaperones are coupled with their metal transfer function.

Tackling metal regulation and transport at the single-molecule level

To maintain normal metal metabolism, organisms utilize dynamic cooperation of many biomacromolecules for regulating metal ion concentrations and bioavailability. How these biomacromolecules work together to achieve their functions is largely unclear. For example, how do metalloregulators and DNA interact dynamically to control gene expression to maintain healthy cellular metal level? And how do metal transporters collaborate dynamically to deliver metal ions? Here we review recent advances in studying the dynamic interactions of macromolecular machineries for metal regulation and transport at the single-molecule level: (1) The development of engineered DNA Holliday junctions as single-molecule reporters for metalloregulator-DNA interactions, focusing onMerR-family regulators. And (2) The development of nanovesicle trapping coupled with single molecule fluorescence resonance energy transfer (smFRET) for studying weak, transient interactions between the copper chaperone Hah1 and the Wilson disease protein. We describe the methodologies,the information content of the single-molecule results, and the insights into the biological functions of the involved biomacromolecules for metal regulation and transport. We also discuss remaining challenges from our perspective.

Single-molecule study of metalloregulator CueR-DNA interactions using engineered Holliday junctions

To maintain normal metal metabolism, bacteria use metal-sensing metalloregulators to control transcription of metal resistance genes. Depending on their metal-binding states, the MerR-family metalloregulators change their interactions with DNA to suppress or activate transcription. To understand their functions fundamentally, we study how CueR, a Cu(1+)-responsive MerR-family metalloregulator, interacts with DNA, using an engineered DNA Holliday junction (HJ) as a protein-DNA interaction reporter in single-molecule fluorescence resonance energy transfer measurements. By analyzing the single-molecule structural dynamics of the engineered HJ in the presence of various concentrations of both apo- and holo-CueR, we show how CueR interacts with the two conformers of the engineered HJ, forming variable protein-DNA complexes at different protein concentrations and changing the HJ structures. We also show how apo- and holo-CueR differ in their interactions with DNA, and discuss their similarities and differences with other MerR-family metalloregulators. The surprising finding that holo-CueR binds more strongly to DNA than to apo-CueR suggests functional differences among MerR-family metalloregulators, in particular in their mechanisms of switching off gene transcription after activation. The study also corroborates the general applicability of engineered HJs as single-molecule reporters for protein-DNA interactions, which are fundamental processes in gene replication, transcription, recombination, and regulation.

Translation factors direct intrinsic ribosome dynamics during translation termination and ribosome recycling

Characterizing the structural dynamics of the translating ribosome remains a major goal in the study of protein synthesis. Deacylation of peptidyl-tRNA during translation elongation triggers fluctuations of the pretranslocation ribosomal complex between two global conformational states. Elongation factor G-mediated control of the resulting dynamic conformational equilibrium helps to coordinate ribosome and tRNA movements during elongation and is thus a crucial mechanistic feature of translation. Beyond elongation, deacylation of peptidyl-tRNA also occurs during translation termination, and this deacylated tRNA persists during ribosome recycling. Here we report that specific regulation of the analogous conformational equilibrium by translation release and ribosome recycling factors has a critical role in the termination and recycling mechanisms. Our results support the view that specific regulation of the global state of the ribosome is a fundamental characteristic of all translation factors and a unifying theme throughout protein synthesis.

On the mechanism of Trolox as antiblinking and antibleaching reagent

Recent advances in photobleaching and blinking prevention have aided the advancement of single-molecule and super-resolution fluorescence microscopy. However, a common mechanism of the action of antifading agents such as Trolox is still missing. In this communication we present evidence that Trolox acts in accordance with a mechanism that involves triplet quenching through electron transfer and subsequent recovery of the resulting radical ion by the complementary redox reaction. The required oxidant for this unifying mechanism based on a reducing and oxidizing system (ROXS) is formed via (photo-) reaction with molecular oxygen. We present evidence that this oxidized form is a quinone derivative of Trolox with strong oxidizing properties. These findings shed light on many contradicting results regarding the action of antifading agents and might lead to a common mechanistic understanding of photobleaching and its prevention. Finally, a recipe on the proper use of Trolox as an antifading agent is provided.

Single-molecule nanocatalysis reveals heterogeneous reaction pathways and catalytic dynamics

Nanoparticles are important catalysts for many chemical transformations. However, owing to their structural dispersions, heterogeneous distribution of surface sites and surface restructuring dynamics, nanoparticles are intrinsically heterogeneous and challenging to characterize in ensemble measurements. Using a single-nanoparticle single-turnover approach, we study the redox catalysis of individual colloidal Au nanoparticles in solution, using single-molecule detection of fluorogenic reactions. We find that for product generation, all Au nanoparticles follow a Langmuir-Hinshelwood mechanism but with heterogeneous reactivity; and for product dissociation, three nanoparticle subpopulations are present that show heterogeneous reactivity between multiple dissociation pathways with distinct kinetics. Correlation analyses of single-turnover waiting times further reveal activity fluctuations of individual Au nanoparticles, attributable to both catalysis-induced and spontaneous dynamic surface restructuring that occurs at different timescales at the surface catalytic and product docking sites. The results exemplify the power of the single-molecule approach in revealing the interplay of catalysis, heterogeneous reactivity and surface structural dynamics in nanocatalysis.

Transcriptional activation of MerR family promoters in Cupriavidus metallidurans CH34

Metal responsive MerR family transcriptional regulators are widespread in bacteria and activate the transcription of genes involved in metal ion detoxification, efflux, or homeostasis, in response to the presence of cognate metal species in the cytoplasm. MerR family regulators recognize and bind to dyad symmetrical DNA sequences in specific promoters that have a spacer region between the -35 and -10 sequences which is longer than the canonical 16-18 bp spacer for other sigma(70)-dependent promoters. In this study we report beta-galactosidase assays of MerR family-regulated gene expression in the multiple metal resistant bacterium Cupriavidus metallidurans. A series of pMU2385 reporter plasmid derivatives containing cloned MerR family-activated promoters were used to determine metal ion-induced responses from different MerR family regulated promoters, as well as regulators cloned with the cognate promoter into pMU2385. Mercuric ion-responsive MerR and lead ion-responsive PbrR activity was confirmed using this assay system as well as MerR family activator activity on heterologous promoters PcopA, PcadA, and Pzcc from Escherichia coli, Pseudomonas aeruginosa and Bordetella pertussis, respectively. In C. metallidurans CH34, transcription from these promoters was activated by MerR family regulators encoded on the chromosome or megaplasmids in response to copper (PcopA), and lead (PcadA and PzccA), showing that MerR family activators in C. metallidurans can act on MerR family promoters from other organisms, which have sequence differences to the predicted C. metallidurans promoters.