Visible light catalysis-assisted assembly of Ni(h)-QD hollow nanospheres in situ via hydrogen bubbles

Ultrafast Electron Transfer in InP/ZnSe/ZnS Quantum Dots for Photocatalytic Hydrogen Evolution

InP/ZnS core/shell quantum dots have shown extraordinary application potential in photocatalysis. In this work, we demonstrated by ultrafast spectroscopy that the electron transfer ability of InP/ZnSe/ZnS core/shell/shell quantum dots was better than that of InP/ZnS quantum dots, because the introduction of ZnSe midshell resulted in improved passivation and greater exciton delocalization. The temperature-dependent PL spectra indicate that the exciton-phonon coupling strength and exciton binding energy of InP/ZnSe/ZnS quantum dots are smaller than those of InP/ZnS quantum dots. Further photocatalytic hydrogen evolution testing revealed that the photocatalytic activity of InP/ZnSe/ZnS quantum dots was significantly higher than that of InP/ZnS quantum dots, and InP/ZnSe/ZnS quantum dots even demonstrated improved stability. This research deepened our understanding of carrier dynamics and charge separation of InP/ZnSe/ZnS quantum dots, especially highlighting the application potential of InP/ZnSe/ZnS quantum dots in photocatalytic hydrogen evolution.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Ternary PdCoP nanoparticles with nanopore structures: synergic boosting of electrocatalytic activity for ethanol oxidation

PdCoP nanoparticles (PdCoP NPs) with nanopore structures were synthesized by a facile one-pot solvothermal approach. Due to their unique geometric structures and the electronic and synergistic effects among multiple components, the optimized PdCoP NPs (PdCoP-NPs-1) show superior mass activity (5.97 A mg_Pd^-1) for the ethanol oxidation reaction under alkaline conditions.

Bioinspired metal complexes for energy-related photocatalytic small molecule transformation

Bioinspired transformation of small-molecules to energy-related feedstocks is an attractive research area to overcome both the environmental issues and the depletion of fossil fuels. The highly effective metalloenzymes in nature provide blueprints for the utilization of bioinspired metal complexes for artificial photosynthesis. Through simpler structural and functional mimics, the representative herein is the pivotal development of several critical small molecule conversions catalyzed by metal complexes, e.g., water oxidation, proton and CO₂ reduction and organic chemical transformation of small molecules. Of great achievement is the establishment of bioinspired metal complexes as catalysts with high stability, specific selectivity and satisfactory efficiency to drive the multiple-electron and multiple-proton processes related to small molecule transformation. Also, potential opportunities and challenges for future development in these appealing areas are highlighted.

Controlled Photoinduced Electron Transfer from InP/ZnS Quantum Dots through Cu Doping: A New Prototype for the Visible-Light Photocatalytic Hydrogen Evolution Reaction

Photoexcited electron extraction from semiconductors can be useful for converting solar energy into useful forms of energy. Although InP quantum dots (QDs) are considered alternative materials for solar energy conversion, the inherent instability of bare InP QDs demands the use of passivation layers such as ZnS for practical applications, which impedes carrier extraction from the QDs. Here, we demonstrate that Cu-doped InP/ZnS (InP/Cu:ZnS) QDs improve the electron transfer ability due to hole capture by Cu dopants. Steady-state and time-resolved photoluminescence studies confirmed that electrons were effectively transferred from the InP/Cu:ZnS QDs to a benzoquinone acceptor by retarding the electron-hole recombination within the QD. We evaluated the photocatalytic H₂ evolution performance of InP/Cu:ZnS QDs under visible light, which showed outstanding photocatalytic H₂ evolution activity and stability under visible light illumination. The photocatalytic activity was preserved even in the absence of a cocatalyst.

The role of the capping agent and nanocrystal size in photoinduced hydrogen evolution using CdTe/CdS quantum dot sensitizers

Hydrogen production via light-driven water splitting is a key process in the context of solar energy conversion. In this respect, the choice of suitable light-harvesting units appears as a major challenge, particularly as far as stability issues are concerned. In this work, we report on the use of CdTe/CdS QDs as photosensitizers for light-assisted hydrogen evolution in combination with a nickel bis(diphosphine) catalyst (1) and ascorbate as the sacrificial electron donor. QDs of different sizes (1.7-3.4 nm) and with different capping agents (MPA, MAA, and MSA) have been prepared and their performance assessed in the above-mentioned photocatalytic reaction. Detailed photophysical studies have been also accomplished to highlight the charge transfer processes relevant to the photocatalytic reaction. Hydrogen evolution is observed with remarkable efficiencies when compared to common coordination compounds like Ru(bpy)₃²⁺ (where bpy = 2,2'-bipyridine) as light-harvesting units. Furthermore, the hydrogen evolution performance under irradiation is strongly determined by the nature of the capping agent and the QD size and can be related to the concentration of the surface defects within the semiconducting nanocrystal. Overall, the present results outline how QDs featuring large quantum yields and long lifetimes are desirable to achieve sustained hydrogen evolution upon irradiation and that a precise control of the structural and photophysical properties thus appears as a major requirement towards profitable photocatalytic applications.

Unveiling Catalytic Sites in a Typical Hydrogen Photogeneration System Consisting of Semiconductor Quantum Dots and 3d-Metal Ions

Semiconductor quantum dots (QDs) in conjunction with non-noble 3d-metal ions (e.g., Fe³⁺, Co²⁺, and Ni²⁺) have emerged as an extremely efficient, facile, and cost-effective means of solar-driven hydrogen (H₂) evolution. However, the exact structural change of the active sites under realistic conditions remains elusive, and the mechanism of H₂ evolution behind the remarkable activity is poorly understood. Here, we successfully track the structural variation of the catalytic sites in the typical H₂ photogeneration system consisting of CdSe/CdS QDs and 3d-metal ions (i.e., Ni²⁺ used here). That is, the nickel precursor of Ni(OAc)₂ changes to Ni(H₂O)₆²⁺ in neutral H₂O and eventually transforms to Ni(OH)₂ nanosheets in alkaline media. Furthermore, the in operando spectroscopic techniques of electron paramagnetic resonance and X-ray absorption spectroscopy reveal the photoinduced transformation of Ni(OH)₂ to a defective structure [Ni_x⁰/Ni_1-x(OH)₂], which acts as the real catalytic species of H₂ photogeneration. Density functional theory (DFT) calculations further indicate that the surface Ni-vacancies (V_Ni) on the Ni(OH)₂ nanosheets enhance the adsorption and dissociation of H₂O molecules to enhance the local proton concentration, while the Ni⁰ clusters behave as H₂-evolution sites, thereby synergistically promoting the activity of H₂ photogeneration in alkaline media.

Synthesis of water-soluble Ni(II) complexes and their role in photo-induced electron transfer with MPA-CdTe quantum dots

Photocatalytic water splitting using solar energy for hydrogen production offers a promising alternative form of storable and clean energy for the future. To design an artificial photosynthesis system that is cost-effective and scalable, earth abundant elements must be used to develop each of the components of the assembly. To develop artificial photosynthetic systems, we need to couple a catalyst for proton reduction to a photosensitizer and understand the mechanism of photo-induced electron transfer from the photosensitizer to the catalyst that serves as the fundamental step for photocatalysis. Therefore, our work is focused on the study of light driven electron transfer kinetics from the quantum dot systems made with inorganic chalcogenides in the presence of Ni-based reduction catalysts. Herein, we report the synthesis and characterization of four Ni(II) complexes of tetradentate ligands with amine and pyridine functionalities (N2/Py2) and their interactions with CdTe quantum dots stabilized by 3-mercaptopropionic acid. The lifetime of the quantum dots was investigated in the presence of the Ni complexes and absorbance, emission and electrochemical measurements were performed to gain a deeper understanding of the photo-induced electron transfer process.

Semiconductor Quantum Dots as Components of Photoactive Supramolecular Architectures

Luminescent quantum dots (QDs) are colloidal semiconductor nanocrystals consisting of an inorganic core covered by a molecular layer of organic surfactants. Although QDs have been known for more than thirty years, they are still attracting the interest of researchers because of their unique size-tunable optical and electrical properties arising from quantum confinement. Moreover, the controlled decoration of the QD surface with suitable molecular species enables the rational design of inorganic-organic multicomponent architectures that can show a vast array of functionalities. This minireview highlights the recent progress in the use of surface-modified QDs - in particular, those based on cadmium chalcogenides - as supramolecular platforms for light-related applications such as optical sensing, triplet photosensitization, photocatalysis and phototherapy.

Immobilization of catalytic sites on quantum dots by ligand bridging for photocatalytic CO2 reduction

Harvesting solar energy to convert carbon dioxide (CO₂) into fossil fuels shows great promise to solve the current global problems of energy crisis and climate change. To achieve this goal, it is desirable to develop efficient catalysts with visible light response to cater for the solar spectrum. CdTe QDs are ideal candidates for absorbing visible light, but it is difficult to directly perform CO₂ reduction due to the lack of effective catalytic sites. Herein, we report a strategy for the activation of mercaptopropionic acid (MPA)-capped CdTe QDs for visible-light-driven CO₂ reduction, in which iron ions (Fe²⁺) are immobilized onto CdTe QDs using l-cysteine as a bridging ligand (CdTe-b-Fe). This ligand bridging strategy can immobilize Fe²⁺ ions on the surface of CdTe QDs as catalytic sites, and these catalytic sites can be conveniently adjusted by directly adding different types or numbers of metal ions. In addition to effectively immobilizing catalytic sites, the bridging ligands can also provide a pathway for electron transport between CdTe QDs and the catalytic sites. The CdTe-b-Fe QD system based on the ligand bridging strategy exhibits excellent catalytic properties: the yield of CH₄/CO (two products together) is 126 μmol g^-1 h^-1, and the selectivity for carbon-based products approaches 98%. This work presents a facile strategy for immobilizing catalytic sites on QDs and provides a platform for designing efficient visible-light driven catalysts for CO₂ reduction.

Semiconductor nanocrystals for small molecule activation via artificial photosynthesis

The protocol of artificial photosynthesis using semiconductor nanocrystals shines light on green, facile and low-cost small molecule activation to produce solar fuels and value-added chemicals.

Susceptible Surface Sulfide Regulates Catalytic Activity of CdSe Quantum Dots for Hydrogen Photogeneration

Semiconducting quantum dots (QDs) have recently triggered a huge interest in constructing efficient hydrogen production systems. It is well established that a large fraction of surface atoms of QDs need ligands to stabilize and avoid them from aggregating. However, the influence of the surface property of QDs on photocatalysis is rather elusive. Here, the surface regulation of CdSe QDs is investigated by surface sulfide ions (S^2- ) for photocatalytic hydrogen evolution. Structural and spectroscopic study shows that with gradual addition of S^2- , S^2- first grows into the lattice and later works as ligands on the surface of CdSe QDs. In-depth transient spectroscopy reveals that the initial lattice S^2- accelerates electron transfer from QDs to cocatalyst, and the following ligand S^2- mainly facilitates hole transfer from QDs to the sacrificial agent. As a result, a turnover frequency (TOF) of 7950 h^-1 can be achieved by the S^2- modified CdSe QDs, fourfold higher than that of original mercaptopropionic acid (MPA) capped CdSe QDs. Clearly, the simple surface S^2- modification of QDs greatly increases the photocatalytic efficiency, which provides subtle methods to design new QD material for advanced photocatalysis.

Efficient photocatalytic hydrogen evolution with ligand engineered all-inorganic InP and InP/ZnS colloidal quantum dots

Photocatalytic hydrogen evolution is a promising technique for the direct conversion of solar energy into chemical fuels. Colloidal quantum dots with tunable band gap and versatile surface properties remain among the most prominent targets in photocatalysis despite their frequent toxicity, which is detrimental for environmentally friendly technological implementations. In the present work, all-inorganic sulfide-capped InP and InP/ZnS quantum dots are introduced as competitive and far less toxic alternatives for photocatalytic hydrogen evolution in aqueous solution, reaching turnover numbers up to 128,000 based on quantum dots with a maximum internal quantum yield of 31%. In addition to the favorable band gap of InP quantum dots, in-depth studies show that the high efficiency also arises from successful ligand engineering with sulfide ions. Due to their small size and outstanding hole capture properties, sulfide ions effectively extract holes from quantum dots for exciton separation and decrease the physical and electrical barriers for charge transfer.

While quantum dots show high efficiency solar-to-fuel conversion for renewable energy, the frequently toxic elements employed present severe safety concerns. Here, authors demonstrate indium phosphide quantum dots as low-toxicity alternatives alongside efficient hydrogen evolution photocatalysis.

Efficient photocatalytic hydrogen evolution with ligand engineered all-inorganic InP and InP/ZnS colloidal quantum dots

Photocatalytic hydrogen evolution is a promising technique for the direct conversion of solar energy into chemical fuels. Colloidal quantum dots with tunable band gap and versatile surface properties remain among the most prominent targets in photocatalysis despite their frequent toxicity, which is detrimental for environmentally friendly technological implementations. In the present work, all-inorganic sulfide-capped InP and InP/ZnS quantum dots are introduced as competitive and far less toxic alternatives for photocatalytic hydrogen evolution in aqueous solution, reaching turnover numbers up to 128,000 based on quantum dots with a maximum internal quantum yield of 31%. In addition to the favorable band gap of InP quantum dots, in-depth studies show that the high efficiency also arises from successful ligand engineering with sulfide ions. Due to their small size and outstanding hole capture properties, sulfide ions effectively extract holes from quantum dots for exciton separation and decrease the physical and electrical barriers for charge transfer.

Generalized Synthesis of Ternary Sulfide Hollow Structures with Enhanced Photocatalytic Performance for Degradation and Hydrogen Evolution

A series of ternary sulfide hollow structures have been successfully prepared by a facile glutathione (GSH)-assisted one-step hydrothermal route, where GSH acts as the source of sulfur and bubble template. We demonstrate the feasibility and versatility of this in situ gas-bubble template strategy by the fabrication of novel hollow structures of MIn₂S₄ (M = Cd, Zn, Ca, Mg, and Mn). Interestingly, with the reaction time varying, the hierarchical CdIn₂S₄ microspheres with controlled internal structures can be regulated from yolk-shell, smaller yolk-shell (yolk-shell with shrunk yolk), hollow, to solid. Under visible-light irradiation, all of our prepared CdIn₂S₄ samples with different morphologies were photoactivated. In virtue of the appealing hierarchical hollow structure, the yolk-shell-structured CdIn₂S₄ microspheres exhibited the optimal photocatalytic activity and excellent durability for both the X₃B degradation and H₂ evolution, which can be ascribed to the synergy-promoting effect of the small crystallite size together with the unique structural advantages of the yolk-shell structure. Thus, we hypothesize that this proof-of-concept strategy paves an example of rational design of hollow structured ternary or multinary sulfides with superior photochemical performance, holding great potential for future multifunctional applications.

Recent Advances in Sensitized Photocathodes: From Molecular Dyes to Semiconducting Quantum Dots

The increasing demand for sustainable and environmentally benign energy has stimulated intense research to establish highly efficient photo-electrochemical (PEC) cells for direct solar-to-fuel conversion via water splitting. Light absorption, as the initial step of the catalytic process, is regarded as the foundation of establishing highly efficient PEC systems. To make full use of visible light, sensitization on photoelectrodes using either molecular dyes or semiconducting quantum dots provides a promising method. In this field, however, there remain many fundamental issues to be solved, which need in-depth study. Here, fundamental knowledge of PEC systems is introduced to enable readers a better understanding of this field. Then, the development history and current state in both molecular dye- and quantum dot-sensitized photocathodes for PEC water splitting are discussed. A systematical comparison between the two systems has been made. Special emphasis is placed on the research of quantum dot-sensitized photocathodes, which have shown superiority in both efficiency and durability towards PEC water splitting at the present stage. Finally, the opportunities and challenges in the future for sensitized PEC water-splitting systems are proposed.

Nonstoichiometric Cux Iny S Quantum Dots for Efficient Photocatalytic Hydrogen Evolution

Unlike their bulk counterpart, Cu_x In_y S quantum dots (QDs) prepared by an aqueous synthetic approach, show promising activity for photocatalytic hydrogen evolution, which is competitive with the state-of-the-art Cd chalcogen QDs. Moreover, the as-prepared Cu_x In_y S QDs with In-rich composition show much better efficiency than the stoichiometric ones (Cu/In=1:1).

Vectorial electron transfer for improved hydrogen evolution by mercaptopropionic-acid-regulated CdSe quantum-dots-TiO2 -Ni(OH)2 assembly

A visible-light-induced hydrogen evolution system based on a CdSe quantum dots (QDs)-TiO2 -Ni(OH)2 ternary assembly has been constructed under an ambient environment, and a bifunctional molecular linker, mercaptopropionic acid, is used to facilitate the interaction between CdSe QDs and TiO2 . This hydrogen evolution system works effectively in a basic aqueous solution (pH 11.0) to achieve a hydrogen evolution rate of 10.1 mmol g(-1)  h(-1) for the assembly and a turnover frequency of 5140 h(-1) with respect to CdSe QDs (10 h); the latter is comparable with the highest value reported for QD systems in an acidic environment. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and control experiments demonstrate that Ni(OH)2 is an efficient hydrogen evolution catalyst. In addition, inductively coupled plasma optical emission spectroscopy and the emission decay of the assembly combined with the hydrogen evolution experiments show that TiO2 functions mainly as the electron mediator; the vectorial electron transfer from CdSe QDs to TiO2 and then from TiO2 to Ni(OH)2 enhances the efficiency for hydrogen evolution. The assembly comprises light antenna CdSe QDs, electron mediator TiO2 , and catalytic Ni(OH)2 , which mimics the strategy of photosynthesis exploited in nature and takes us a step further towards artificial photosynthesis.

H2S bubbles-assisted synthesis of hollow Cu2−xSeyS1−y/reduced graphene oxide nanocomposites with tunable compositions and localized surface plasmon resonance

Homogeneous hollow Cu_2−xSe_yS_1−y/rGO nanocomposites are controllably synthesized by a facile one-pot aqueous chemical approach via H₂S gas bubble templates at room temperature, using a nonhazardous reducing agent, ascorbic acid.

Enhancement of the efficiency of photocatalytic reduction of protons to hydrogen via molecular assembly

Conspectus One of the best solutions for meeting future energy demands is the conversion of water into hydrogen fuel using solar energy. The splitting of water into molecular hydrogen (H2) and oxygen (O2) using light involves two half-reactions: the oxidation of water to O2 and the reduction of protons to H2. To take advantage of the full range of the solar spectrum, researchers have extensively investigated artificial photosynthesis systems consisting of two photosensitizers and two catalysts with a Z-configuration: one photosensitizer-catalyst pair for H2 evolution and the other for O2 evolution. This type of complete artificial photosynthesis system is difficult to build and optimize; therefore, researchers typically study the reductive half-reaction and the oxidative half-reaction separately. To study the two half-reactions, researchers use a sacrificial electron donor to provide electrons for the reductive half-reaction, and a sacrificial electron acceptor to capture electrons for the oxidative half-reaction. After optimization, they can eliminate the added donors and acceptors as the two half reactions are coupled to a complete photocatalytic water spitting system. Most photocatalytic systems for the H2 evolution half-reaction consist of a photosensitizer, a catalyst, and a sacrificial electron donor. To promote photoinduced electron transfer and photocatalytic H2 production, these three components should be assembled together in a controlled manner. Researchers have struggled to design a photocatalytic system for H2 evolution that uses earth-abundant materials and is both efficient and durable. This Account reviews advances our laboratory has made in the development of new systems for photocatalytic H evolution that uses earth-abundant materials and is both efficient and durable. We used organometallic complexes and quantum-confined semiconductor nanocrystals (QDs) as photosensitizers, and [FeFe]-H2ase mimics and inorganic transition metal salts as catalysts to construct photocatalytic systems with sacrificial electron donors. Covalently linked Re(I) complex-[FeFe]-H2ase mimic dyads and ferrocene-Re(I) complex-[FeFe]-H2ase mimic triads could photocatalyze H2 production in organic solutions, but these photocatalytic systems tended to decompose. We also constructed several assemblies of CdTe and CdSe QDs as photosensitizers with [FeFe]-H2ase mimics as catalysts. These assemblies produced H2 in aqueous solutions photocatalytically and efficiently, with turnover numbers (TONs) up to tens of thousands. Assemblies of 3-mercaptopropionic acid (MPA)-capped CdTe QDs with Co(2+) ions formed Coh-CdTe hollow nanospheres, and MPA capped-CdSe QDs with Ni(+) ions produced Nih-CdSe/CdS core/shell hybrids in situ in aqueous solutions upon irradiation. The resulting photocatalytic systems proved robust for H2 evolution. These systems showed excellent activity and impressive durability in the photocatalytic reaction, suggesting that they can serve as a valuable part of an overall water splitting system.