Polyfluorophores on a DNA backbone: a multicolor set of labels excited at one wavelength

Ratiometric sandwich-type assays for RNAs with a point mutation using benzo[a]pyrene-modified probes

Benzo[a]pyrene-modified oligonucleotides were developed for the detection of RNAs with a point mutation. The probes produced two distinct fluorescence signals in response to single nucleotide differences in the RNA sequences, allowing for discrimination between the matched and single base mismatched RNA sequences in colorimetric and ratiometric manners.

Bio-inspired polymer array vapor sensor with dual signals of fluorescence intensity and wavelength shift

Organic vapor sensors based on polymer owing to their tunable molecular structures and designable functions have attracted considerable research interest. However, detecting multiple organic vapors with high accuracy and a low detection limit is still challenging. Herein, inspired by the mammalian olfactory recognition system, organic vapor sensors based on one-dimensional microfilament array structures with a wide range of sensing gases are demonstrated. By introducing aggregation-induced emission (AIE) molecules, sensors possess dual-optical sensing mechanisms of variation in fluorescence intensity and wavelength. By virtue of the synergistic effects of dual signals, superb accuracy and incredibly low detection limit are achieved for identifying analytes. In particular, the polymer/AIE microfilament array can detect acetone vapor down to 0.03% of saturated vapor pressure. In the saturated vapor of acetone, the fluorescence intensity of the sensor arrays was reduced by 53.7%, while the fluorescence wavelength was red-shifted by 21 nm. Combined with the principal component analysis (PCA) algorithm, the polymer/AIE molecular sensor arrays accomplished the classification and identification of acetone, ethanol, methylene chloride, toluene, and benzene. This bioinspired approach with dual sensing signals may broaden practical applications to high-performance gas sensors for precise molecular detection.

Chemically modified nucleic acids and DNA intercalators as tools for nanoparticle assembly

The self-assembly of inorganic nanoparticles to larger structures is of great research interest as it allows the fabrication of novel materials with collective properties correlated to the nanoparticles' individual characteristics. Recently developed methods for controlling nanoparticle organisation have enabled the fabrication of a range of new materials. Amongst these, the assembly of nanoparticles using DNA has attracted significant attention due to the highly selective recognition between complementary DNA strands, DNA nanostructure versatility, and ease of DNA chemical modification. In this review we discuss the application of various chemical DNA modifications and molecular intercalators as tools for the manipulation of DNA-nanoparticle structures. In detail, we discuss how DNA modifications and small molecule intercalators have been employed in the chemical and photochemical DNA ligation in nanostructures; DNA rotaxanes and catenanes associated with reconfigurable nanoparticle assemblies; and DNA backbone modifications including locked nucleic acids, peptide nucleic acids and borane nucleic acids, which affect the stability of nanostructures in complex environments. We conclude by highlighting the importance of maximising the synergy between the communities of DNA chemistry and nanoparticle self-assembly with the aim to enrich the library of tools available for the manipulation of nanostructures.

A novel class of polymeric fluorescent dyes assembled using a DNA synthesizer

In the pursuit of a novel class of fluorescent dyes we have developed a programmable polymer system that enables the rational design and control of macromolecular constructs through simple control of polymer primary sequence. These polymers are assembled using standard phosphoramidite chemistry on a DNA synthesizer which allows for extremely rapid prototyping and enables many permutations due to the large selection of phosphoramidite monomers presently available on the market. This programmability to some extent allows us to control the interactions/spacing of payload molecules distributed along the designed polymeric backbone. Control of molecular architecture using this technology has allowed us to address the long-standing technical issue of contact quenching between fluorescent dyes offering new possibilities in the life sciences arena. Much like peptidic sequences coding for enzymes, cofactors, and receptors (all needing control of tertiary structure for proper function via primary sequence) our programmable system approaches a similar endpoint using a phosphate based polymeric backbone assembled in a completely automated fashion. Using this novel technology, we have efficiently synthesized several types of fluorescent dyes and demonstrated the programmability in molecule design, including the increases in brightness of the fluorescence emission.

Influences of Linker and Nucleoside for the Helical Self-Assembly of Perylene Along DNA Templates

Six different conjugates of perylene with 2'-deoxyuridine and with 2-amino-2'-deoxyadenosine were synthesized and applied for DNA-templated assembly in aqueous buffer solutions. They differ by the linkers ethynylene, phenylene, and phenylene-ethynylene between nucleoside and chromophore. The nucleosides were investigated as monomers in CHCl₃ and dimethyl sulfoxide by optical spectroscopy. The properties of the four phenylene-linked conjugates are similar to that of perylene as reference because these linkers separate both aromatic parts. The ethynylene linker electronically couples the chromophore with the respective nucleoside and thus red shifts the absorbance. The DNA-templated assembly properties were elucidated by mixing the templates in aqueous buffer with the perylene-nucleoside conjugates from a dimethyl sulfoxide stock solution. Specific binding of the nucleosides was probed by comparing the results with dA₂₀ and T₂₀ as single-stranded DNA templates. Our studies reveal the structural parameters that are important for the DNA-templated assembly of perylenes. First, perylene-2'-deoxyuridine conjugates do not form DNA-templated helical assemblies, regardless of the choice of linker. Second, the ethynylene linker is crucial for successful DNA-templated chromophore assemblies of perylene-2-amino-2'-deoxyadenosine conjugates. Third, in contrast, the phenylene linker inhibits self-assembly along single-stranded DNA templates. In conclusion, the 2-amino-2'-deoxyadenosin in combination with the ethynylene linker provides the best structural feature for specific and helical DNA-templated assembly of perylenes. This result is important for the design of future DNA-based supramolecular architectures with chromophores, in particular DNA-based light-harvesting systems and DNA systems for emitting or sensing circularly polarized luminescence.

Phosphoramitoids-A submonomer approach to sequence defined N-substituted phosphoramidate polymers

There is a growing interest in new methods to generate bio-inspired, chemically diverse, sequence-defined synthetic polymers. Solid-phase submonomer approaches offer facile access to these types of materials, since they take advantage of readily available synthons. Submonomer approaches to date have been applied to peptidomimetics with oligo-amide backbones. Here we extend the approach to a phosphorous-containing backbone, where N-substituted phosphoramidate oligomers are constructed from a set of amine submonomers, diphenyl H-phosphonate, and cyclohexane diol. The key chemical steps in chain elongation are a chain extension reaction based on H-phosphonate (P III) chemistry, and a side chain attachment step based on the Atherton-Todd reaction. Cheap, stable chemical reagents are used without heating, all reaction times are 30 minutes or less and open to air, and no main-chain protecting groups are required. Phosphoramitoid tetramers and pentamers displaying a variety of side chain functionalities were synthesized by a three-step solid-phase submonomer method, typically with >85% crude purities.

Competition of Charge and Energy Transfer Processes in Donor-Acceptor Fluorescence Pairs: Calibrating the Spectroscopic Ruler

Sensing strategies utilizing Förster resonance energy transfer (FRET) are widely used for probing biological phenomena. FRET sensitivity to the donor-acceptor distance makes it ideal for measuring the concentration of a known analyte or determining the spatial separation between fluorescent labels in a macromolecular assembly. The difficulty lies in extracting the FRET efficiency from the acceptor-induced quenching of the donor emission, which may contain a significant non-FRET contribution. Here, we demonstrate a general spectroscopic approach for differentiating between charge transfer and energy transfer (ET) processes in donor-acceptor assemblies and apply the developed method for unravelling the FRET/non-FRET contributions in cyanine dye-semiconductor quantum dot (QD) constructs. The present method relies on correlating the amplitude of the acceptor emission to specific changes in the donor excitation profile in order to extract ET-only transfer efficiencies. Quenching of the donor emission is then utilized to determine the non-ET component, tentatively attributed to the charge transfer. We observe that the latter accounts for 50-99% of donor emission quenching in QD-Cy5 and QD-Cy7 systems, stressing the importance of determining the non-FRET efficiency in a spectroscopic ruler and other FRET-based sensing applications.

BODIPY-Bacteriochlorin Energy Transfer Arrays: Toward Near-IR Emitters with Broadly Tunable, Multiple Absorption Bands

A series of energy transfer arrays, comprising a near-IR absorbing and emitting bacteriochlorin, and BODIPY derivatives with different absorption bands in the visible region (503-668 nm) have been synthesized. Absorption band of BODIPY was tuned by installation of 0, 1, or 2 styryl substituents [2-(2,4,6-trimethoxyphenyl)ethenyl], which leads to derivatives with absorption maxima at 503, 587, and 668 nm, respectively. Efficient energy transfer (>0.90) is observed for each dyad, which is manifested by nearly exclusive emission from bacteriochlorin moiety upon BODIPY excitation. Fluorescence quantum yield of each dyad in nonpolar solvent (toluene) is comparable with that observed for corresponding bacteriochlorin monomer, and is significantly reduced in solvent of high dielectric constants (DMF), most likely by photoinduced electron transfer. Given the availability of diverse BODIPY derivatives, with absorption between 500-700 nm, BODIPY-bacteriochlorin arrays should allow for construction of near-IR emitting agents with multiple and broadly tunable absorption bands. Solvent-dielectric constant dependence of Φf in dyads gives an opportunity to construct environmentally sensitive fluorophores and probes.

Recent Advances in Nucleic Acid Targeting Probes and Supramolecular Constructs Based on Pyrene-Modified Oligonucleotides

In this review, we summarize the recent advances in the use of pyrene-modified oligonucleotides as a platform for functional nucleic acid-based constructs. Pyrene is of special interest for the development of nucleic acid-based tools due to its unique fluorescent properties (sensitivity of fluorescence to the microenvironment, ability to form excimers and exciplexes, long fluorescence lifetime, high quantum yield), ability to intercalate into the nucleic acid duplex, to act as a π-π-stacking (including anchoring) moiety, and others. These properties of pyrene have been used to construct novel sensitive fluorescent probes for the sequence-specific detection of nucleic acids and the discrimination of single nucleotide polymorphisms (SNPs), aptamer-based biosensors, agents for binding of double-stranded DNAs, and building blocks for supramolecular complexes. Special attention is paid to the influence of the design of pyrene-modified oligonucleotides on their properties, i.e., the structure-function relationships. The perspectives for the applications of pyrene-modified oligonucleotides in biomolecular studies, diagnostics, and nanotechnology are discussed.

Pyrene-nucleobase conjugates: synthesis, oligonucleotide binding and confocal bioimaging studies

Fluorescent pyrene–linker–nucleobase (nucleobase = thymine, adenine) conjugates with carbonyl and hydroxy functionalities in the linker were synthesized and characterized. X-ray single-crystal structure analysis performed for the pyrene–C(O)CH₂CH₂–thymine (2) conjugate reveals dimers of molecules 2 stabilized by hydrogen bonds between the thymine moieties. The photochemical characterization showed structure-dependent fluorescence properties of the investigated compounds. The conjugates bearing a carbonyl function represent weak emitters as compared to compounds with a hydroxy function in the linker. The self-assembly properties of pyrene nucleobases were investigated in respect to their binding to single and double strand oligonucleotides in water and in buffer solution. In respect to the complementary oligothymidine T₁₀ template in water, compounds 3 and 5 both show a self-assembling behavior according to canonical base–base pairing. However, in buffer solution, derivative 5 was much more effective than 3 in binding to the T₁₀ template. Furthermore the adenine derivative 5 binds to the double-stranded (dA)₁₀–T₁₀ template with a self-assembly ratio of 112%. Such a high value of a self-assembly ratio can be rationalized by a triple-helix-like binding, intercalation, or a mixture of both. Remarkably, compound 5 also shows dual staining pattern in living HeLa cells. Confocal microscopy confirmed that 5 predominantly stains mitochondria but it also accumulates in the nucleoli of the cells.

Fluorescent nucleobases as tools for studying DNA and RNA

Understanding the diversity of dynamic structures and functions of DNA and RNA in biology requires tools that can selectively and intimately probe these biomolecules. Synthetic fluorescent nucleobases that can be incorporated into nucleic acids alongside their natural counterparts have emerged as a powerful class of molecular reporters of location and environment. They are enabling new basic insights into DNA and RNA, and are facilitating a broad range of new technologies with chemical, biological and biomedical applications. In this Review, we will present a brief history of the development of fluorescent nucleobases and explore their utility as tools for addressing questions in biophysics, biochemistry and biology of nucleic acids. We provide chemical insights into the two main classes of these compounds: canonical and non-canonical nucleobases. A point-by-point discussion of the advantages and disadvantages of both types of fluorescent nucleobases is made, along with a perspective into the future challenges and outlook for this burgeoning field.

Luminescent Carbon Dot Mimics Assembled on DNA

Nanometer-sized fragments of carbon in the form of multilayer graphene ("carbon dots") have been under highly active study for applications in imaging. While offering advantages of low toxicity and photostability, such nanomaterials are inhomogeneous and have limited wavelengths of emission. Here we address these issues by assembling luminescent aromatic C16-C38 hydrocarbons together on a DNA scaffold in homogeneous, soluble molecular compounds. Monomer deoxyribosides of five different aromatic hydrocarbons were synthesized and assembled into a library of 1296 different tetramer compounds on PEG-polystyrene beads. These were screened for photostability and a range of emission colors using 365 nm excitation, observing visible light (>400 nm) emission. We identified a set of six oligomers (DNA-carbon assemblies, DNA-CAs) with exceptional photostability that emit from 400 to 680 nm in water, with Stokes shifts of up to 110 nm, quantum yields ranging from 0.01 to 0.29, and fluorescence lifetimes from 3 to 42 ns. In addition, several of these DNA-CAs exhibited white emission in aqueous solution. The molecules were used in multispectral cell imaging experiments and were taken up into cells passively. The results expand the range of emission properties that can be achieved in water with all-hydrocarbon chromophores and establish the use of the DNA scaffold to arrange carbon layers in homogeneous, rapidly synthesized assemblies.

Color-Change Photoswitching of an Alkynylpyrene Excimer Dye

We describe a photoswitchable DNA-based dimeric dye that visibly changes fluorescence from green to blue upon UV irradiation. A novel bis-alkyne-dependent [2+2+2] cycloaddition is proposed as a mechanism for the color change in air. The photoinduced structural switching results in spatial separation of stacked pyrene units, thereby causing selective loss of the excimer emission. We demonstrate and suggest several applications for this novel photoswitch.

Nucleic Acid-Based Nanodevices in Biological Imaging

The nanoscale engineering of nucleic acids has led to exciting molecular technologies for high-end biological imaging. The predictable base pairing, high programmability, and superior new chemical and biological methods used to access nucleic acids with diverse lengths and in high purity, coupled with computational tools for their design, have allowed the creation of a stunning diversity of nucleic acid-based nanodevices. Given their biological origin, such synthetic devices have a tremendous capacity to interface with the biological world, and this capacity lies at the heart of several nucleic acid-based technologies that are finding applications in biological systems. We discuss these diverse applications and emphasize the advantage, in terms of physicochemical properties, that the nucleic acid scaffold brings to these contexts. As our ability to engineer this versatile scaffold increases, its applications in structural, cellular, and organismal biology are clearly poised to massively expand.

Hybridization accompanying FRET event in labeled natural nucleoside-unnatural nucleoside containing chimeric DNA duplexes

Förster resonance energy transfer (FRET) is a highly efficient strategy in illuminating the structures, structural changes and dynamics of DNA, proteins and other biomolecules and thus is being widely utilized in studying such phenomena, in designing molecular/biomolecular probes for monitoring the hybridization event of two single stranded DNA to form duplex, in gene detection and in many other sensory applications in chemistry, biology and material sciences. Moreover, FRET can give information about the positional status of chromophores within the associated biomolecules with much more accuracy than other methods can yield. Toward this end, we want to report here the ability of fluorescent unnatural nucleoside, triazolylphenanthrene ((TPhen)BDo) to show FRET interaction upon hybridization with fluorescently labeled natural nucleosides, (Per)U or (OxoPy)U or (Per)U, forming two stable chimeric DNA duplexes. The pairing selectivity and the thermal duplex stability of the chimeric duplexes are higher than any of the duplexes with natural nucleoside formed. The hybridization results in a Förster resonance energy transfer (FRET) from donor triazolylphenanthrene of (TPhen)BDo to acceptor oxopyrene of (OxoPy)U and/or to perylene chromophore of (Per)U, respectively, in two chimeric DNA duplexes. Therefore, we have established the FRET process in two chimeric DNA duplexes wherein a fluorescently labeled natural nucleoside ((OxoPy)U or (Per)U) paired against an unnatural nucleoside ((TPhen)BDo) without sacrificing the duplex stability and B-DNA conformation. The hybridization accompanying FRET event in these classes of interacting fluorophores is new. Moreover, there is no report of such designed system of chimeric DNA duplex. Our observed phenomenon and the design can potentially be exploited in designing more of such efficient FRET pairs for useful application in the detection and analysis of biomolecular interactions and in material science application.

Efficient synthesis of fluorescent alkynyl C-nucleosides via Sonogashira coupling for the preparation of DNA-based polyfluorophores

A facile and general procedure for the preparation of alkynyl C-nucleosides with varied fluorophores is presented. Sonogashira coupling was used as a key reaction to conjugate the dyes to an easily accessible ethynyl functionalized deoxyribose derivative. The new C-nucleosides were used for the preparation of DNA-based polyfluorophores.

Donor/acceptor chromophores-decorated triazolyl unnatural nucleosides: synthesis, photophysical properties and study of interaction with BSA

We report the syntheses and photophysical properties of some triazolyl donor/acceptor unnatural nucleosides and studies on the interaction of one of the fluorescent nucleosides with BSA.

Cross-metathesis reaction of α- and β-vinyl C-glycosides with alkenes

Cross-metathesis of α- and β-vinyl C-deoxyribosides and α-vinyl C-galactoside with various terminal alkenes under different conditions was studied. The cross-metathesis of the former proceeded with good yields of the corresponding products in ClCH2CH2Cl the latter required the presence of CuI in CH2Cl2 to achieve good yields of the products. A simple method for the preparation of α- and β-vinyl C-deoxyribosides was also developed. In addition, feasibility of deprotection and further transformations were briefly explored.

DNA-Based Oligochromophores as Light-Harvesting Systems

The chromophores ethynyl pyrene as blue, ethynyl perylene as green and ethynyl Nile red as red emitter were conjugated to the 5-position of 2'-deoxyuridine via an acetylene bridge. Using phosphoramidite chemistry on solid phase labelled DNA duplexes were prepared that bear single chromophore modifications, and binary and ternary combinations of these chromophore modifications. The steady-state and time-resolved fluorescence spectra of all three chromophores were studied in these modified DNA duplexes. An energy-transfer cascade occurs from ethynyl pyrene over ethynyl perylene to ethynyl Nile red and subsequently an electron-transfer cascade in the opposite direction (from ethynyl Nile red to ethynyl perylene or ethynyl pyrene, but not from ethynyl perylene to ethynyl pyrene). The electron-transfer processes finally provide charge separation. The efficiencies by these energy and electron-transfer processes can be tuned by the distances between the chromophores and the sequences. Most importantly, excitation at any wavelength between 350 and 700 nm finally leads to charge separated states which make these DNA samples promising candidates for light-harvesting systems.

Pattern-Based Detection of Anion Pollutants in Water with DNA Polyfluorophores

Many existing irrigation, industrial and chemical storage sites are currently introducing hazardous anions into groundwater, making the monitoring of such sites a high priority. Detecting and quantifying anions in water samples typically requires complex instrumentation, adding cost and delaying analysis. Here we address these challenges by development of an optical molecular method to detect and discriminate a broad range of anionic contaminants with DNA-based fluorescent sensors. A library of 1296 tetrameric-length oligodeoxyfluorosides (ODFs) composed of metal ligand and fluorescence modulating monomers was constructed with a DNA synthesizer on PEG-polystyrene microbeads. These oligomers on beads were incubated with YIII or ZnII ions to provide affinity and responsiveness to anions. Seventeen anions were screened with the library under an epifluorescence microscope, ultimately yielding eight chemosensors that could discriminate 250 μM solutions of all 17 anions in buffered water using their patterns of response. This sensor set was able to identify two unknown anion samples from ten closely-responding anions and could also function quantitatively, determining unknown concentrations of anions such as cyanide (as low as 1 mM) and selenate (as low as 50 μM). Further studies with calibration curves established detection limits of selected anions including thiocyanate (detection limit ~300 μM) and arsenate (~800 μM). The results demonstrate DNA-like fluorescent chemosensors as versatile tools for optically analyzing environmentally hazardous anions in aqueous environments.

Assembling programmable FRET-based photonic networks using designer DNA scaffolds

DNA demonstrates a remarkable capacity for creating designer nanostructures and devices. A growing number of these structures utilize Förster resonance energy transfer (FRET) as part of the device's functionality, readout or characterization, and, as device sophistication increases so do the concomitant FRET requirements. Here we create multi-dye FRET cascades and assess how well DNA can marshal organic dyes into nanoantennae that focus excitonic energy. We evaluate 36 increasingly complex designs including linear, bifurcated, Holliday junction, 8-arm star and dendrimers involving up to five different dyes engaging in four-consecutive FRET steps, while systematically varying fluorophore spacing by Förster distance (R0). Decreasing R0 while augmenting cross-sectional collection area with multiple donors significantly increases terminal exciton delivery efficiency within dendrimers compared with the first linear constructs. Förster modelling confirms that best results are obtained when there are multiple interacting FRET pathways rather than independent channels by which excitons travel from initial donor(s) to final acceptor.

Pattern-based detection of toxic metals in surface water with DNA polyfluorophores

Heavy metal contamination of water can be toxic to humans and wildlife; thus the development of methods to detect this contamination is of high importance. Here we describe the design and application of DNA-based fluorescent chemosensors on microbeads to differentiate eight toxic metal ions in water. We developed and synthesized four fluorescent 2'-deoxyribosides of metal-binding ligands. A tetramer-length oligodeoxy-fluoroside (ODF) library of 6561 members was constructed and screened for sequences responsive to metal ions, of which seven sequences were selected. Statistical analysis of the response patterns showed successful differentiation of the analytes at concentrations as low as 100 nM. Sensors were able to classify water samples from 13 varied sites and quantify metal contamination in unknown specimens. The results demonstrate the practical potential of bead-based ODF chemosensors to analyze heavy metal contamination in water samples by a simple and inexpensive optical method.

Rational design of fluorophores for in vivo applications

Several classes of small organic molecules exhibit properties that make them suitable for fluorescence in vivo imaging. The most promising candidates are cyanines, squaraines, boron dipyrromethenes, porphyrin derivatives, hydroporphyrins, and phthalocyanines. The recent designing and synthetic efforts have been dedicated to improving their optical properties (shift the absorption and emission maxima toward longer wavelengths and increase the brightness) as well as increasing their stability and water solubility. The most notable advances include development of encapsulated cyanine dyes with increased stability and water solubility, squaraine rotaxanes with increased stability, long-wavelength-absorbing boron dipyrromethenes, long-wavelength-absorbing porphyrin and hydroporphyrin derivatives, and water-soluble phthalocyanines. Recent advances in luminescence and bioluminescence have made self-illuminating fluorophores available for in vivo applications. Development of new types of hydroporphyrin energy-transfer dyads gives the promise for further advances in in vivo multicolor imaging.

Fluorescent probes for nucleic Acid visualization in fixed and live cells

This review analyses the literature concerning non-fluorescent and fluorescent probes for nucleic acid imaging in fixed and living cells from the point of view of their suitability for imaging intracellular native RNA and DNA. Attention is mainly paid to fluorescent probes for fluorescence microscopy imaging. Requirements for the target-binding part and the fluorophore making up the probe are formulated. In the case of native double-stranded DNA, structure-specific and sequence-specific probes are discussed. Among the latest, three classes of dsDNA-targeting molecules are described: (i) sequence-specific peptides and proteins; (ii) triplex-forming oligonucleotides and (iii) polyamide oligo(N-methylpyrrole/N-methylimidazole) minor groove binders. Polyamides seem to be the most promising targeting agents for fluorescent probe design, however, some technical problems remain to be solved, such as the relatively low sequence specificity and the high background fluorescence inside the cells. Several examples of fluorescent probe applications for DNA imaging in fixed and living cells are cited. In the case of intracellular RNA, only modified oligonucleotides can provide such sequence-specific imaging. Several approaches for designing fluorescent probes are considered: linear fluorescent probes based on modified oligonucleotide analogs, molecular beacons, binary fluorescent probes and template-directed reactions with fluorescence probe formation, FRET donor-acceptor pairs, pyrene excimers, aptamers and others. The suitability of all these methods for living cell applications is discussed.

Near-IR emissive chlorin-bacteriochlorin energy-transfer dyads with a common donor and acceptors with tunable emission wavelength

Design, synthesis, and optical properties of a series of novel chlorin-bacteriochlorin energy transfer dyads are described. Each dyad is composed of a common red-absorbing (645-646 nm) chlorin, as an energy donor, and a different near-IR emitting bacteriochlorin, as an energy acceptor. Each bacteriochlorin acceptor is equipped with a different set of auxochromes, so that each of them emits at a different wavelength. Dyads exhibit an efficient energy transfer (≥0.77) even for chlorin-bacteriochlorin pairs with large (up to 122 nm) separation between donor emission and acceptor absorption. Excitation of the chlorin donor results in relatively strong emission of the bacteriochlorin acceptor, with a quantum yield Φf range of 0.155-0.23 in toluene and 0.12-0.185 in DMF. The narrow, tunable emission band of bacteriochlorins enables the selection of a series of three dyads with well-resolved emissions at 732, 760, and 788 nm, and common excitation at 645 nm. Selected dyads have been also converted into bioconjugatable N-succinamide ester derivatives. The optical properties of the described dyads make them promising candidates for development of a family of near-IR fluorophores for simultaneous imaging of multiple targets, where the whole set of fluorophores can be excited with the common wavelength, and fluorescence from each can be independently detected.

Oligodeoxynucleotides containing multiple thiophene-modified isomorphic fluorescent nucleosides

5-(Thien-2-yl)-2'-deoxyuridine, an isomorphic fluorescent nucleoside analogue, was incorporated into multiple positions within single stranded oligodeoxynucleotides. With minimal impact on duplex stability and overall structure, oligonucleotides containing three identical isomorphic fluorescent nucleosides in alternating or neighboring positions display enhanced, sequence-dependent on-signals for either duplex formation or dissociation.

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil

Contamination of soil and groundwater by petroleum-based products is an extremely widespread and important environmental problem. Here we have tested a simple optical approach for detecting and identifying such industrial contaminants in soil samples, using a set of fluorescent DNA-based chemosensors in pattern-based sensing. We used a set of diverse industrial volatile chemicals to screen and identify a set of five short oligomeric DNA fluorophores on PEG-polystyrene microbeads that could differentiate the entire set after exposure to their vapors in air. We then tested this set of five fluorescent chemosensor compounds for their ability to respond with fluorescence changes when exposed to headgas over soil samples contaminated with one of ten different samples of crude oil, petroleum distillates, fuels, lubricants and additives. Statistical analysis of the quantitative fluorescence change data (as Δ(R,G,B) emission intensities) revealed that these five chemosensors on beads could differentiate all ten product mixtures at 1000 ppm in soil within 30 minutes. Tests of sensitivity with three of the contaminant mixtures showed that they could be detected and differentiated in amounts at least as low as one part per million in soil. The results establish that DNA-polyfluorophores may have practical utility in monitoring the extent and identity of environmental spills and leaks, while they occur and during their remediation.

Genetically encoded multispectral labeling of proteins with polyfluorophores on a DNA backbone

Genetically encoded methods for protein conjugation are of high importance as biological tools. Here we describe the development of a new class of dyes for genetically encoded tagging that add new capabilities for protein reporting and detection via HaloTag methodology. Oligodeoxyfluorosides (ODFs) are short DNA-like oligomers in which the natural nucleic acid bases are replaced by interacting fluorescent chromophores, yielding a broad range of emission colors using a single excitation wavelength. We describe the development of an alkyl halide dehalogenase-compatible chloroalkane linker phosphoramidite derivative that enables the rapid automated synthesis of many possible dyes for protein conjugation. Experiments to test the enzymatic self-conjugation of nine different DNA-like dyes to proteins with HaloTag domains in vitro were performed, and the data confirmed the rapid and efficient covalent labeling of the proteins. Notably, a number of the ODF dyes were found to increase in brightness or change color upon protein conjugation. Tests in mammalian cellular settings revealed that the dyes are functional in multiple cellular contexts, both on the cell surface and within the cytoplasm, allowing protein localization to be imaged in live cells by epifluorescence and laser confocal microscopy.

Synthesis and hybridization properties of oligonucleotides modified with 5-(1-aryl-1,2,3-triazol-4-yl)-2'-deoxyuridines

Oligonucleotides modified with consecutive incorporations of 5-(1-aryl-1,2,3-triazol-4-yl)-2'-deoxyuridine monomers display strong thermal affinity and binding specificity toward RNA targets, due to formation of chromophore arrays in the major groove.

Probe design for the effective fluorescence imaging of intracellular RNA

Over the past two decades, the spatiotemporal analysis of fluorescently labeled single RNA species has provided a broad insight into the synthesis, localization, degradation, and transport of RNA. To elucidate the dynamic behavior of functional RNAs in living cells, researchers throughout the world have proposed numerous fluorometric strategies for intracellular RNA imaging. Because, like most other biological molecules, RNA is intrinsically nonfluorescent, the development of methods for the labeling of RNAs of interest with fluorescent molecules is essential. Several artificial tag sequences have been attached onto the 3' end of target RNAs and used as scaffolds for interacting with their fluorescent counterparts. In this Personal Account, we focus on the methods that have been developed to show how RNAs expressed in cells can be labeled and visualized by fluorescent proteins, small molecules, or nucleic acids. Each of these methods is designed to increase the sensitivity and specificity for imaging or to decrease the background fluorescence.

Triazolyl donor/acceptor chromophore decorated unnatural nucleosides and oligonucleotides with duplex stability comparable to that of a natural adenine/thymine pair

We report the design and synthesis of triazolyl donor/acceptor unnatural nucleosides via click chemistry and studies on the duplex stabilization of DNA containing two such new nucleosides. The observed duplex stabilization among the self-pair/heteropair has been found to be comparable to that of a natural A/T pair. Our observations on the comparable duplex stabilization has been explained on the basis of possible π-π stacking and/or charge transfer interactions between the pairing partners. The evidence of ground-state charge transfer complexation came from the UV-vis spectra and the static quenching of fluorescence in a heteropair. We have also exploited one of our unnatural DNAs in stabilizing abasic DNA.

Large scale synthesis of 2'-amino-LNA thymine and 5-methylcytosine nucleosides

Thymine intermediate 17 has been synthesized on a multigram scale (50 g, 70 mmol) from starting sugar 1 in 15 steps in an overall yield of 73%, with only 5 purification steps. The key thymine intermediate 18 was obtained from 17 in a single step in 96% yield, whereas the key 5-methylcytosine intermediate 20 was obtained from 17 in 2 steps in 58% yield. This highly efficient large scale route necessitates only 2 and 3 novel steps to obtain N2'-functionalized thymine and 5-methylcytosine amino-LNA phosphoramidites from these key intermediates, respectively.

Nucleic acid fluorescent probes for biological sensing

Nucleic acid fluorescent probes are playing increasingly important roles in biological sensing in recent years. In addition to the conventional functions of single-stranded DNA/RNA to hybridize with their complementary strands, affinity nucleic acids (aptamers) with specific target binding properties have also been developed, which has greatly broadened the application of nucleic acid fluorescent probes to the detection of a large variety of analytes, including small molecules, proteins, ions, and even whole cells. Another chemical property of nucleic acids is to act as substrates for various nucleic acid enzymes. This property can be utilized not only to detect those enzymes and screen their inhibitors, but also employed to develop effective signal amplification systems, which implies extensive applications. This review mainly covers the biosensing methods based on the above three types of nucleic acid fluorescent probes. The most widely used intensity-based biosensing assays are covered first, including nucleic acid probe-based signal amplification methods. Then fluorescence lifetime, fluorescence anisotropy, and fluorescence correlation spectroscopy assays are introduced, respectively. As a rapidly developing field, fluorescence imaging approaches are also briefly summarized.

DNA polyfluorophores for real-time multicolor tracking of dynamic biological systems

Dye-ing to live: Spectral limitations of common organic dyes make it difficult or impossible to visualize and follow multiple biological components in rapidly moving systems. The development of a multispectral set of improved DNA-scaffolded fluorophores is described. Their use in multicolor cellular imaging (see scheme) and in tracking of biological motions on the subsecond timescale is demonstrated.