Highly Enantioselective Propargylic Hydroxylations Catalyzed by Chloroperoxidase

Enantioselective and Regiodivergent Synthesis of Propargyl- and Allenylsilanes through Catalytic Propargylic C-H Deprotonation

We report a highly enantioselective intermolecular C-H bond silylation catalyzed by a phosphoramidite-ligated iridium catalyst. Under reagent-controlled protocols, propargylsilanes resulting from C(sp3)-H functionalization, as well the regioisomeric and synthetically versatile allenylsilanes, could be obtained with excellent levels of enantioselectivity and good to excellent control of propargyl/allenyl selectivity. In the case of unsymmetrical dialkyl acetylenes, good to excellent selectivity for functionalization at the less-hindered site was also observed. A variety of electrophilic silyl sources (R3SiOTf and R3SiNTf2), either commercial or in situ-generated, were used as the silylation reagents, and a broad range of simple and functionalized alkynes, including aryl alkyl acetylenes, dialkyl acetylenes, 1,3-enynes, and drug derivatives were successfully employed as substrates. Detailed mechanistic experiments and DFT calculations suggest that an η3-propargyl/allenyl Ir intermediate is generated upon π-complexation-assisted deprotonation and undergoes outer-sphere attack by the electrophilic silylating reagent to give propargylic silanes, with the latter step identified as the enantiodetermining step.

A Simple Access to γ- and ε-Keto Arenes via Enzymatic Divergent C─H Bond Oxyfunctionalization

Performing divergent C─H bond functionalization on molecules with multiple reaction sites is a significant challenge in organic chemistry. Biocatalytic oxyfunctionalization reactions of these compounds to the corresponding ketones/aldehydes are typically hindered by selectivity issues. To address these challenges, the catalytic performance of oxidoreductases is explored. The results show that combining the peroxygenase-catalyzed propargylic C─H bond oxidation with the Old Yellow Enzyme-catalyzed reduction of conjugated C─C triple bonds in one-pot enables the regio- and chemoselective oxyfunctionalization of sp3 C─H bonds that are distant from benzylic sites. This enzymatic approach yielded a variety of γ-keto arenes with diverse structural and electronic properties in yields of up to 99% and regioselectivity of 100%, which are difficult to achieve using other chemocatalysis and enzymes. By adjusting the C─C triple bond, the carbonyl group's position can be further tuned to yield ε-keto arenes. This enzymatic approach can be combined with other biocatalysts to establish new synthetic pathways for accessing various challenging divergent C─H bond functionalization reactions.

Stereoselective Total Synthesis of Macrophage-Produced Prohealing 14,21-Dihydroxy Docosahexaenoic Acids

Synthesis of 14S,21R- and 14S,21S-dihydroxy-DHA (diHDHA) among the four possible stereoisomers of 14,21-diHDHA was studied. Methyl (R)-lactate (>97% ee), selected as a C20-C22 fragment (DHA numbering), was converted to the C17-C22 phosphonium salt, which was subjected to a Wittig reaction with racemic C16-aldehyde of the C12-C16 part with the TMS and TBS-oxy groups at C12 and C14, yielding the C12-C22 derivative with 14R/S and 21R chirality. Kinetic resolution using Sharpless asymmetric epoxidation of the TBS-deprotected allylic alcohol with l-(+)-DIPT/Ti(O-i-Pr)₄ afforded 14S-epoxy alcohol and 14R-allylic alcohol with >99% diastereomeric excess (de) for both. The CN group was introduced to the epoxy alcohol by reaction with Et₂AlCN. The 14R-allylic alcohol was also converted to the nitrile via Mitsunobu inversion. Reduction of the nitrile with DIBAL afforded the key aldehyde corresponding to the C11-C22 moiety. The Wittig reaction of this aldehyde with a phosphonium salt of the remaining C1-C10 part followed by functional group manipulation gave 14S,21R-diHDHA. Similarly, ethyl (S)-lactate (>99% ee) was converted to 14S,21S-diHDHA. The chiral LC-UV-MS/MS analysis demonstrated that each of these two 14,21-diHDHAs synthesized using the presented total organic synthesis was highly stereoselective and identical to the macrophage-produced counterpart.

Self-repairing metal–organic hybrid complexes for reinforcing immobilized chloroperoxidase reusability

A self-repairing metal–chloroperoxidase (CPO) hybrid nanocatalyst with a sodium alginate (SA) coating displayed robust reusability under acidic conditions.

Dinuclear zinc complex catalyzed asymmetric methylation and alkynylation of aromatic aldehydes

A general AzePhenol dinuclear zinc catalytic system has been successfully developed and introduced into the asymmetric addition of dimethylzinc and alkynylzinc to aromatic aldehydes.

The taming of oxygen: biocatalytic oxyfunctionalisations

The scope and limitations of oxygenases as catalysts for preparative organic synthesis is discussed.

Enzymatic kinetic resolution of internal propargylic diols. Part I: a new approach for the synthesis of (S)-pent-2-yn-1,4-diol, a natural product from Clitocybe catinus

An efficient two round EKR of bis-substituted propargylic diols has been described and applied for synthesize (S)-pent-2-yn-1,4-diol, a natural product from Clitocybe catinus.

Specific oxyfunctionalisations catalysed by peroxygenases: opportunities, challenges and solutions

Peroxygenases are promising oxyfunctionalisation catalysts for organic synthesis.

Whole-cell biocatalysis for selective and productive C-O functional group introduction and modification

During the last decades, biocatalysis became of increasing importance for chemical and pharmaceutical industries. Regarding regio- and stereospecificity, enzymes have shown to be superior compared to traditional chemical synthesis approaches, especially in C-O functional group chemistry. Catalysts established on a process level are diverse and can be classified along a functional continuum starting with single-step biotransformations using isolated enzymes or microbial strains towards fermentative processes with recombinant microorganisms containing artificial synthetic pathways. The complex organization of respective enzymes combined with aspects such as cofactor dependency and low stability in isolated form often favors the use of whole cells over that of isolated enzymes. Based on an inventory of the large spectrum of biocatalytic C-O functional group chemistry, this review focuses on highlighting the potentials, limitations, and solutions offered by the application of self-regenerating microbial cells as biocatalysts. Different cellular functionalities are discussed in the light of their (possible) contribution to catalyst efficiency. The combined achievements in the areas of protein, genetic, metabolic, and reaction engineering enable the development of whole-cell biocatalysts as powerful tools in organic synthesis.

Asymmetric catalytic alkynylation of acetaldehyde: application to the synthesis of (+)-tetrahydropyrenophorol

By controlling the kinetics of alkynylation over aldolisation (by slowing adding the acceptor), the challenging asymmetric catalytic alkynylation of acetaldehyde has been realized. This protocol yields the corresponding attractive synthons in good to excellent enantiocontrol and shows broad tolerance and applicability. This was highlighted by its application to the synthesis of several natural products such as the rapid construction of the macrocyclic diolide (+)-tetrahydropyrenophorol.

Enantiospecificity of chloroperoxidase-catalyzed epoxidation: biased molecular dynamics study of a cis-β-methylstyrene/chloroperoxidase-compound I complex

Molecular dynamics simulations of an explicitly solvated cis-β-methylstyrene/chloroperoxidase-Compound I complex are performed to determine the cause of the high enantiospecificity of epoxidation. From the simulations, a two-dimensional free energy potential is calculated to distinguish binding potential wells from which reaction to 1S2R and 1R2S epoxide products may occur. Convergence of the free energy potential is accelerated with an adaptive biasing potential. Analysis of binding is followed by analysis of 1S2R and 1R2S reaction precursor structures in which the substrate, having left the binding wells, places its reactive double bond in steric proximity to the oxyferryl heme center. Structural analysis of binding and reaction precursor conformations is presented. We find that 1), a distortion of Glu(183) is important for CPO-catalyzed epoxidation as was postulated previously based on experimental results; 2), the free energy of binding does not provide significant differentiation between structures leading to the respective epoxide enantiomers; and 3), CPO's enantiospecificity toward cis-β-methylstyrene is likely to be caused by a specific group of residues which form a hydrophobic core surrounding the oxyferryl heme center.

Can we measure catalyst efficiency in asymmetric chemical reactions? A theoretical approach

Small molecule asymmetric catalysts are often described as being “good” or “bad” but to date there has been no way of comparing catalyst efficiency quantitatively. We define a simple formula, Asymmetric Catalyst Efficiency (ACE), that allows for such a comparison. We propose that a catalyst is more efficient if fewer atoms are utilised to give a product in a required enantiomeric excess. We illustrate this concept by analysing several well-known asymmetric catalytic chemical reactions carried out in academic laboratories, and compare small molecule catalysts with enzymes. We conclude that ACE is a useful descriptor for the comparison of diverse catalytic systems. It is also noteworthy that, despite the relatively short period of investigation into small molecule catalysts, they are competitive with enzymes with regards to this measure of catalytic efficiency.

Visible light-driven and chloroperoxidase-catalyzed oxygenation reactions

Robust peroxidase-catalyzed enantiospecific oxyfunctionalizations can be achieved by simple light-driven in situ generation of hydrogen peroxide.

Stabilization of Chloroperoxidase by Polyethylene Glycols in Aqueous Media: Kinetic Studies and Synthetic Applications

Chloroperoxidase (CPO) is one of the most versatile of the heme peroxidase enzymes for synthetic applications. Despite the potential use of CPO, commercial processes have not been developed because of the low water solubility of many organic substrates of synthetic interest and the limited stability due to inactivation by H(2)O(2). CPO catalytic properties have been studied in aqueous solutions in the presence of short-chain poly(ethylene glycol)s (PEGs), and the sulfoxidation of thioanisole, as model substrate, has been investigated. The addition of PEGs allows a better substrate solubilization in the reaction mixture and the enzyme to retain more of its initial activity, with respect to pure buffer. Kinetic studies were performed to optimize the experimental conditions, and complete enantioselective conversion to the (R)-sulfoxide (ee = 99%) was observed in the presence of PEG 200 and tri(ethylene glycol). The relevant stabilization of chloroperoxidase due to the presence of PEGs allows the enzyme to convert the substrate with significant product yields even after 10 days, with a consequent increase in enzyme productivity. This is a promising result in view of industrial application of the enzyme.

Monoterpenes as novel substrates for oxidation and halo-hydroxylation with chloroperoxidase from Caldariomyces fumago

Chloroperoxidase (CPO) from Caldariomyces fumago was analysed for its ability to oxidize ten different monoterpenes with hydrogen peroxide as oxidant. In the absence of halide ions geraniol and, to a lesser extent, citronellol and nerol were converted into the corresponding aldehydes, whereas terpene hydrocarbons did not serve as substrates under these conditions. In the presence of chloride, bromide and iodide ions, every terpene tested was converted into one or more products. (1S)-(+)-3-carene was chosen as a model substrate for the CPO-catalysed conversion of terpenes in the presence of sodium halides. With chloride, bromide and iodide, the reaction products were the respective (1S,3R,4R,6R)-4-halo-3,7,7-trimethyl-bicyclo[4.1.0]-heptane-3-ols, as identified by 1H and 13C nuclear magnetic resonance. These product formations turned out to be strictly regio- and stereoselective and proceeded very rapidly and almost quantitatively. Initial specific activities of halohydrin formation increased from 4.22 U mg-1 with chloride to 12.22 U mg-1 with bromide and 37.11 U mg-1 with iodide as the respective halide ion. These results represent the first examples of the application of CPO as a highly efficient biocatalyst for monoterpene functionalization. This is a promising strategy for 'green' terpene chemistry overcoming drawbacks usually associated with cofactor-dependent oxygenases, whole-cell biocatalysts and conventional chemical methods used for terpene conversions.

Heme-thiolate haloperoxidases: versatile biocatalysts with biotechnological and environmental significance

Heme-thiolate haloperoxidases are undoubtedly the most versatile biocatalysts of the hemeprotein family and share catalytic properties with at least three further classes of heme-containing oxidoreductases, namely, classic plant and fungal peroxidases, cytochrome P450 monooxygenases, and catalases. For a long time, only one enzyme of this type--the chloroperoxidase (CPO) of the ascomycete Caldariomyces fumago--has been known. The enzyme is commercially available as a fine chemical and catalyzes the unspecific chlorination, bromination, and iodation (but no fluorination) of a variety of electrophilic organic substrates via hypohalous acid as actual halogenating agent. In the absence of halide, CPO resembles cytochrome P450s and epoxidizes and hydroxylates activated substrates such as organic sulfides and olefins; aromatic rings, however, are not susceptible to CPO-catalyzed oxygen-transfer. Recently, a second fungal haloperoxidase of the heme-thiolate type has been discovered in the agaric mushroom Agrocybe aegerita. The UV-Vis adsorption spectrum of the isolated enzyme shows little similarity to that of CPO but is almost identical to a resting-state P450. The Agrocybe aegerita peroxidase (AaP) has strong brominating as well as weak chlorinating and iodating activities, and catalyzes both benzylic and aromatic hydroxylations (e.g., of toluene and naphthalene). AaP and related fungal peroxidases could become promising biocatalysts in biotechnological applications because they seemingly fill the gap between CPO and P450 enzymes and act as "self-sufficient" peroxygenases. From the environmental point of view, the existence of a halogenating mushroom enzyme is interesting because it could be linked to the multitude of halogenated compounds known from these organisms.

Chloroperoxidase-catalyzed oxidation of 4,6-dimethyldibenzothiophene as dimer complexes: Evidence for kinetic cooperativity

A sigmoidal kinetic behavior of chloroperoxidase for the oxidation of 4,6-dimethyldibenzothiophene (4,6-DMDBT) in water-miscible organic solvent is for the first time reported. Kinetics of 4,6-DMDBT oxidation showed a cooperative profile probably due to the capacity of chloroperoxidase to recognize a substrate dimer (pi-pi dimer) in its active site. Experimental evidence is given for dimer formation and its presence in the active site of chloroperoxidase. The kinetic data were adjusted for a binding site able to interact with either monomer or dimer substrates, producing a cooperative model describing a one-site binding of two related species. Determination of kinetics constants by iterative calculations of possible oxidation paths of 4,6-DMDBT suggests that kinetics oxidation of dimer substrate is preferred when compared to monomer oxidation. Steady-state fluorometry of substrate in the absence and presence of chloroperoxidase, described by the spectral center of mass, supports this last conclusion.