Heterometallic Titanium–Organic Frameworks by Metal-Induced Dynamic Topological Transformations

Translocation and Confinement of Tetraamines in Adaptable Microporous Cavities

Metal-Organic Frameworks can be grafted with amines by coordination to metal vacancies to create amine-appended solid adsorbents, which are being considered as an alternative to using aqueous amine solutions for CO2 capture. In this study, we propose an alternative mechanism that does not rely on the use of neutral metal vacancies as binding sites but is enabled by the structural adaptability of heterobimetallic Ti2Ca2 clusters. The combination of hard (Ti4+) and soft (Ca2+) metal centers in the inorganic nodes of the framework enables MUV-10 to adapt its pore windows to the presence of triethylenetetramine molecules. This dynamic cluster response facilitates the translocation and binding of tetraamine inside the microporous cavities to enable the formation of bis-coordinate adducts that are stable in water. The extension of this grafting concept from MUV-10 to larger cavities not restrictive to CO2 diffusion will complement other strategies available for the design of molecular sorbents for decarbonization applications.

A Multifunctional CaII-EuIII Heterometallic Organic Framework with Sensing and Selective Adsorption in Water

With increasing global industrialization, it is urgent and challenging to develop multifunctional species for detection and adsorption in the environment. For this purpose, a novel anionic heterometallic organic framework, [(CH3)2NH2][CaEu(CAM)2(H2O)2]·4H2O·4DMF (CaEuCAM), is hydrothermally synthesized based on chelidamic acid (H3CAM). Single crystal analysis shows that CaEuCAM features two different oxygen-rich channels along the c-axis in which one CAM3- bridges two sextuple-coordinated Ca2+ and two octuple-coordinated Eu3+ with a μ4-η1: η1: η1: η1: η1: η1 new chelating and bridging mode. The characteristic bright red emission and superior hydrostability of CaEuCAM under harsh acidic and basic conditions benefit it by acting as a highly sensitive sensor for Fe3+ and 3-nitrophenol (3-NP) with extremely low LODs through remarkable quenching. The combination of experiments and theoretical calculations for sensing mechanisms shows that the competitive absorption and interaction are responsible for Fe3+-induced selective emission quenching, while that for 3-NP is the result of the synergism of host-guest chemistry and the inner filter effect. Meanwhile, the assimilation of negative charge plus channels renders CaEuCAM a highly selective adsorbent for methylene blue (MB) due to a synergy of electrostatic affinity, ion-dipole interaction, and size matching. Of note is the reusability of CaEuCAM toward Fe3+/3-NP sensing and MB adsorption besides its fast response. These findings could be very useful in guiding the development of multifunctional Ln-MOFs for sensing and adsorption applications in water media.

Heterometallic cages: synthesis and applications

High symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis and drug delivery. Recently there have been increasing efforts to enhance those applications by generating reduced symmetry MSAs. While there are several emerging methods for generating lower symmetry MSAs, this tutorial review examines the general methods used for synthesizing heterometallic MSAs with a particular focus on heterometallic cages. Additionally, the intrinsic properties of the cages and their potential emerging applications as host-guest systems and reaction catalysts are described.

Stepwise construction of multi-component metal-organic frameworks

Multi-component metal-organic frameworks (MC-MOFs) are crystalline porous materials containing multiple organic ligands or mixed metals, which manifest new properties beyond the linear combination of the single component. However, the traditional one-pot synthesis method for MOFs is not always applicable for synthesizing MC-MOFs due to the competitive coordination of multiple ligands and metals. Therefore, the stepwise construction of MC-MOFs has been explored, which enables more precise control of the heterogeneity within the ordered MC-MOFs. This review provides a summary of the synthesis strategies, namely, ligand exchange, coordinative modification, covalent modification, ligand metalation, cluster metalation, and use of mixed-metal precursors, for the stepwise construction of MC-MOFs. Furthermore, we discuss the applications of MC-MOFs with ordered arrangements of multiple functionalities, focusing on gas adsorption and separation, water remediation, heterogeneous catalysis, luminescence, and chemical sensing.

Chemical complexity for targeted function in heterometallic titanium-organic frameworks

Research on metal-organic frameworks is shifting from the principles that control the assembly, structure, and porosity of these reticular solids, already established, into more sophisticated concepts that embrace chemical complexity as a tool for encoding their function or accessing new properties by exploiting the combination of different components (organic and inorganic) into these networks. The possibility of combining multiple linkers into a given network for multivariate solids with tunable properties dictated by the nature and distribution of the organic connectors across the solid has been well demonstrated. However, the combination of different metals remains still comparatively underexplored due to the difficulties in controlling the nucleation of heterometallic metal-oxo clusters during the assembly of the framework or the post-synthetic incorporation of metals with distinct chemistry. This possibility is even more challenging for titanium-organic frameworks due to the additional difficulties intrinsic to controlling the chemistry of titanium in solution. In this perspective article we provide an overview of the synthesis and advanced characterization of mixed-metal frameworks and emphasize the particularities of those based in titanium with particular focus on the use of additional metals to modify their function by controlling their reactivity in the solid state, tailoring their electronic structure and photocatalytic activity, enabling synergistic catalysis, directing the grafting of small molecules or even unlocking the formation of mixed oxides with stoichiometries not accessible to conventional routes.

Scalable Synthesis of Holey Deficient 2D Co/NiO Single-Crystal Nanomeshes via Topological Transformation for Efficient Photocatalytic CO2 Reduction

Preparation of holey, single-crystal, 2D nanomaterials containing in-plane nanosized pores is very appealing for the environment and energy-related applications. Herein, an in situ topological transformation is showcased of 2D layered double hydroxides (LDHs) allows scalable synthesis of holey, single-crystal 2D transition metal oxides (TMOs) nanomesh of ultrathin thickness. As-synthesized 2D Co/NiO-2 nanomesh delivers superior photocatalytic CO₂ -syngas conversion efficiency (i.e., V_CO of 32460 µmol h^-1 g^-1 CO and V H 2 ${V_{{{\rm{H}}_2}}}$ of 17840 µmol h^-1 g^-1 H₂ ), with V_CO about 7.08 and 2.53 times that of NiO and 2D Co/NiO-1 nanomesh containing larger pore size, respectively. As revealed in high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), the high performance of Co/NiO-2 nanomesh primarily originates from the edge sites of nanopores, which carry more defect structures (e.g., atomic steps or vacancies) than basal plane for CO₂ adsorption, and from its single-crystal structure adept at charge transport. Theoretical calculation shows the topological transformation from 2D hydroxide to holey 2D oxide can be achieved, probably since the trace Co dopant induces a lattice distortion and thus a sharp decrease of the dehydration energy of hydroxide precursor. The findings can advance the design of intriguing holey 2D materials with well-defined geometric and electronic properties.

Metal Node Control of Brønsted Acidity in Heterobimetallic Titanium-Organic Frameworks

Compared to indirect framework modification, synthetic control of cluster composition can be used to gain direct access to catalytic activities exclusive of specific metal combinations. We demonstrate this concept by testing the aminolysis of epoxides with a family of isostructural mesoporous frameworks featuring five combinations of homometallic and heterobimetallic metal-oxo trimers (Fe3, Ti3, TiFe2, TiCo2, and TiNi2). Only TiFe2 nodes display activities comparable to benchmark catalysts based on grafting of strong acids, which here originate from the combination of Lewis Ti4+ and Brønsted Fe3+-OH acid sites. The applicability of MUV-101(Fe) to the synthesis of β-amino alcohols is demonstrated with a scope that also includes the gram scale synthesis of propranolol, a natural β-blocker listed as an essential medicine by the World Health Organization, with excellent yield and selectivity.

Biomimetic Self-Assembling Metal-Organic Architectures with Non-Iridescent Structural Coloration for Synergetic Antibacterial and Osteogenic Activity of Implants

Materials in nature feature versatile and programmable interactions to render macroscopic architectures with multiscale structural arrangements. By rationally combining metal-carboxylate and metal-organophosphate coordination interactions, Au₂₅(MHA)₁₈ (MHA, 6-mercaptohexanoic acid) nanocluster self-assembled structural color coating films and phytic acid (PA)-metal coordination complexes are sequentially constructed on the surface of titanium implants. The Lewis acid-base coordination principle applies for these metal-organic coordination networks. The isotropic arrangement of nanoclusters with a short-range order is investigated via grazing incidence wide-angle X-ray scattering. The integration of robust M-O (M = Ti, Zr, Hf) and labile Cu-O coordination bonds with high connectivity of Au₂₅(MHA)₁₈ nanoclusters enables these artificial photonic structures to achieve a combination of mechanical stability and bacteriostatic activity. Moreover, the colorless and transparent PA-metal complex layer allows the viewing of the structural color and surface wettability switching to hydrophilic and makes feasible the interfacial biomineralization of hydroxyapatite. Collectively, these modular metal-organic coordination-driven assemblies are predictive and rational material design strategies with tunable hierarchy and diversity. The complete metal-organic architectures will not only help improve the physicochemical properties of the bone-implant interface with synergistic antibacterial and osseointegration activities but also can boost surface engineering of medical metal implants.

Influence of the Synthesis and Crystallization Processes on the Cation Distribution in a Series of Multivariate Rare-Earth Metal-Organic Frameworks and Their Magnetic Characterization

The incorporation of multiple metal atoms in multivariate metal-organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields.

Reversible Structural Transformation and Catalytic Potential of Lanthanide-Azobenzenetetracarboxylates

Inspired by the catalytic potential of lanthanide coordination polymers of 3,3',5,5'-azobenzenetetracarboxylic acid (H₄abtc), two new isostructural [Ln₂^III(Habtc)₂(DMSO)₄]·DMSO·H₂O (Ln^III = Sm^III (I), Eu^III = (II), DMSO = dimethyl sulfoxide) were synthesized and characterized. Their single-crystal structures were elucidated and described. Structural transformations of II in the solid state prompted by ligand substitution and thermal treatment were studied, from which genuine reversible transformation of II to [Eu^III(Habtc)(H₂O)₄]·3H₂O (II') and [Eu^III(Habtc)(H₂O)₂]·2H₂O (II″) was revealed. This illustrates the rare case of reversible transformation in lanthanide coordination polymers. The transformation between II' and II″ was also investigated. Structural transformations among these frameworks are discussed with regard to the coordination environment of Eu^III, coordination modes of Habtc^3-, and similarities and disparities in framework architecture and registration. In addition, the catalytic performance of II with and without the prior activation in CO₂ cycloaddition reaction with epichlorohydrin was studied in comparison with II' and II″. The excellent performance of II disregarding the activation process has been demonstrated with the maximum turnover number and turnover frequency of 7682 and 1921 h^-1, respectively, for the activated II and 7142 and 1786 h^-1, respectively, for the nonactivated II. The maintenance of the catalytic efficiency over 10 cycles of the catalysis and the regeneration process is illustrated and discussed with respect to structural transformation.

Significantly lowered activation energy in proton conductor by Mg substitution in a layered Ni metal-organic framework

Designs and developments of proton conductors are highly important in chemistry and energy fields. In this study, a novel metal-organic framework H₂DAB-MgNi(ox)₃ was synthesized. X-ray powder diffraction, scanning transmission electron microscopy, and scanning transmission electron microscopy-energy-dispersive X-ray mapping measurements demonstrated that the H₂DAB-MgNi(ox)₃ had a solid-solution structure, with the homogeneous distribution of Mg and Ni elements. The proton conductivity of H₂DAB-MgNi(ox)₃ was enhanced from that of H₂DAB-Ni₂(ox)₃ at 95% relative humidity by Mg substitution.

Metal-hydrogen-pi-bonded organic frameworks

We report the synthesis and characterization of a new series of permanently porous, three-dimensional metal-organic frameworks (MOFs), M-HAF-2 (M = Fe, Ga, or In), constructed from tetratopic, hydroxamate-based, chelating linkers. The structure of M-HAF-2 was determined by three-dimensional electron diffraction (3D ED), revealing a unique interpenetrated hcb-a net topology. This unusual topology is enabled by the presence of free hydroxamic acid groups, which lead to the formation of a diverse network of cooperative interactions comprising metal-hydroxamate coordination interactions at single metal nodes, staggered π-π interactions between linkers, and H-bonding interactions between metal-coordinated and free hydroxamate groups. Such extensive, multimodal interconnectivity is reminiscent of the complex, noncovalent interaction networks of proteins and endows M-HAF-2 frameworks with high thermal and chemical stability and allows them to readily undergo postsynthetic metal ion exchange (PSE) between trivalent metal ions. We demonstrate that M-HAF-2 can serve as versatile porous materials for ionic separations, aided by one-dimensional channels lined by continuously π-stacked aromatic groups and H-bonding hydroxamate functionalities. As an addition to the small group of hydroxamic acid-based MOFs, M-HAF-2 represents a structural merger between MOFs and hydrogen-bonded organic frameworks (HOFs) and illustrates the utility of non-canonical metal-coordinating functionalities in the discovery of new bonding and topological patterns in reticular materials.

Nanochannel-Based {BaZn}-Organic Framework for Catalytic Activity on Cycloaddition Reaction of Epoxides with CO2 and Deacetalization-Knoevenagel Condensation

Because of the integrated properties from chemically dissimilar metals, microporous heterometallic MOFs have wider potential applicability, which prompts us to explore the tendency collocation of different metal cations in the...

A Cyclic Titanium-Oxo Cluster with a Tetrathiafulvalene Connector as a Precursor for Highly Efficient Adsorbent of Cationic Dyes

Titanium-oxo clusters (TOCs) have been studied for applications in catalysis, energy storage and transfer, light emission, and so on; however, use of TOCs for the selective adsorption of dyes has not yet been reported. Herein, a TOC compound formulated as [Ti₆O₃(OⁱPr)₁₄(TTFTC)]₄ (1, TTFTC = tetrathiafulvalene-tetracarboxylate) was successfully prepared and crystallographically characterized. Compound 1 has a cyclic structure assembled by four Ti₆ clusters and four rodlike TTFTC connectors. Red compound 1 self-condenses to form a black polymeric organic-inorganic hybrid material (denoted as B-1), which was characterized by various techniques. B-1 is an amorphous TiO material that is formed by the irregular condensation of 1 by the removal of alkoxyl groups. B-1 exhibits high dye adsorption efficiency toward cationic dyes with a q_e value of 651.3 mg/g at 298 K for methylene blue (MB). Moreover, B-1 can be used to selectively remove MB not only from mixed cationic-anionic dye solutions but also from some mixed cationic dyes, which is related to their structures. Kinetic, isotherm, and thermodynamic studies demonstrated that the pseudo-second-order kinetic model and Freundlich model show a good fit to the experimental data. The adsorption process involves an exothermic and entropy decreasing process. In addition, dye-adsorbed B-1 can be further used as a photocurrent-responsive material. The work opens up a new field for the application of TOCs in the selective adsorption and removal of dyes.

Synthesis, crystal structure and magnetic properties of poly[[diaqua{μ6-2-[bis-(carboxyl-atometh-yl)amino]-terephthalato}-dicobalt(II)] 1.6-hydrate]

The asymmetric unit of the polymeric title compound {[Co2(C12H7NO8)(H2O)2]·1.6H2O} n comprises two CoII ions, which are coordinated by fully deprotonated 2-aminodi-acetic terephthalic acid (adtp4-) and terminal water mol-ecules in distorted octa-hedral N1O5 and O6 coordination environments. The title compound features tetra-nuclear CoII units bridged by κ 3 O:O:O'- and κ 3 O:O,O'-carboxyl-ate groups, which are joined into ribbons via syn-anti carboxyl-ate bridges. The parallel adtp4- ligands with an alternately reversed arrangement further link adjacent CoII ribbons into (010) layers, which are assembled into a three-dimensional supra-molecular network via inter-molecular hydrogen bonds. The disordered water solvent mol-ecules are situated in channels parallel to [100]. Magnetic measurements and analyses reveal that the title compound displays anti-ferromagnetic behaviour. The purity of the title compound was characterized by X-ray powder diffraction.

Tunable Band Gaps in MUV-10(M): A Family of Photoredox-Active MOFs with Earth-Abundant Open Metal Sites

Titanium-based metal-organic frameworks (Ti-MOFs) have attracted intense research attention because they can store charges in the form of Ti³⁺ and they serve as photosensitizers to cocatalysts through heterogeneous photoredox reactions at the MOF-liquid interface. Both the charge storage and charge transfer depend on the redox potentials of the MOF and the molecular substrate, but the factors controlling these energetic aspects are not well understood. Additionally, photocatalysis involving Ti-MOFs relies on cocatalysts rather than the intrinsic Ti reactivity, in part because Ti-MOFs with open metal sites are rare. Here, we report that the class of Ti-MOFs known as MUV-10 can be synthetically modified to include a range of redox-inactive ions with flexible coordination environments that control the energies of the photoactive orbitals. Lewis acidic cations installed in the MOF cluster (Cd²⁺, Sr²⁺, and Ba²⁺) or introduced to the pores (H⁺, Li⁺, Na⁺, K⁺) tune the electronic structure and band gaps of the MOFs. Through the use of optical redox indicators, we report the first direct measurement of the Fermi levels (redox potentials) of photoexcited MOFs in situ. Taken together, these results explain the ability of Ti-MOFs to store charges and provide design principles for achieving heterogeneous photoredox chemistry with electrostatic control.

The excellent biocompatibility and negligible immune response of the titanium heterometallic MOF MUV-10

The Ti-Ca heterometallic MOF MUV-10 exhibits good dispersibility in phosphate buffer and low phosphate-induced degradation in comparison to other MOF systems. It induces no cytotoxicity towards cells of the immune system and no inmune response, making it an attractive candidate for biomedical applications and demonstrating its safe use for other applications.

Four new Cu6S6 cluster-based coordination compounds: synthesis, crystal structures and fluorescence properties

A hexagonal prismatic Cu₆S₆ cluster exhibits excellent near-infrared fluorescence properties due to its short Cu-Cu bonds, however, the construction of Cu₆S₆ cluster-based compounds with extended structures is still a challenge. Here, four new Cu₆S₆ cluster-based coordination compounds, formulated as Cu₃(pymt)₃ (1), {(CuCN)₂[Cu₃(mpymt)₃]}_n (2), {(CuSCN)[Cu₃(mpymt)₃]}_n (3) and {(CuCN)₂[Cu₃(dmpymt)₃]·CH₃CN}_n (4) (Hpymt = pyrimidine-2-thiolate, Hmpymt = 4-methyl-pyrimidine-2-thione and Hdmpymt = 4,6-dimethylpyrimidine-2-thione), have been synthesized through the reactions of mercaptopyrimidine derivatives and CuCN or CuSCN under solvo-thermal conditions and characterized by single-crystal X-ray diffraction, powder X-ray diffraction, IR spectroscopy, elemental analysis, and thermal gravimetric analysis. Single-crystal X-ray diffraction analysis reveals that compound 1 is a zero-dimensional Cu₆(pymt)₆ molecule containing a distorted pseudo-hexagonal prismatic Cu₆S₆ core. Compounds 2 and 4 with isomorphic frameworks but different organic linkers show a rare three-dimensional framework with nor topology constructed from Cu₆(mpymt)₆ units and one-dimensional chiral [Cu(CN)]_n chains; compared with compound 2, a more hydrophobic one-dimensional channel in compound 4 is observed due to the increase of the methyl groups on the pyrimidine ligand, in which acetonitrile molecules are filled in the channels of compound 4. Compound 3 shows a rare two-dimensional layer constructed from Cu₆(mpymt)₆ units and one-dimensional puckered (CuSCN)_n chains. For the first time, Cu₆S₆ clusters are connected to one-dimensional inorganic CuCN (or CuSCN) chains through mercaptopyrimidine derivatives to obtain extended arrays in compounds 2-4. The crystals of compounds 1-4 in the solid state all show apparent red light emission. Compound 4 shows sensitive luminescence quenching response to nitrobenzene (NB), and the corresponding quenching constant (K_sv) and detection limit are 2.06 × 10³ M^-1 and 9.27 ppm, respectively. This study provides a new strategy to construct Cu₆S₆ cluster-based coordination polymers that have great potential in various applications such as luminescence sensing.

Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium-Organic Frameworks

We introduce the first example of isoreticular titanium-organic frameworks, MUV-10 and MUV-12, to show how the different affinity of hard Ti(IV) and soft Ca(II) metal sites can be used to direct selective grafting of amines. This enables the combination of Lewis acid titanium centers and available -NH₂ sites in two sizeable pores for cooperative cycloaddition of CO₂ to epoxides at room temperature and atmospheric pressure. The selective grafting of molecules to heterometallic clusters adds up to the pool of methodologies available for controlling the positioning and distribution of chemical functions in precise positions of the framework required for definitive control of pore chemistry.

Effect of Linker Distribution in the Photocatalytic Activity of Multivariate Mesoporous Crystals

The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr₆-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologies to optimize the synthesis of single crystals of UiO-68 and UiO-68-TZDC, a photoactive analogue based on a tetrazine dicarboxylic derivative. The analysis of the single linker phases reveals the necessity of combining both linkers to produce multivariate frameworks that combine efficient light sensitization, chemical stability, and porosity, all relevant to photocatalysis. We use solvent-assisted linker exchange reactions to produce a family of UiO-68-TZDC_% binary frameworks, which respect the integrity and morphology of the original crystals. Our results suggest that the concentration of TZDC in solution and the reaction time control the distribution of this linker in the sibling crystals for a uniform mixture or the formation of core-shell domains. We also demonstrate how the possibility of generating an asymmetric distribution of both linkers has a negligible effect on the electronic structure and optical band gap of the solids but controls their performance for drastic changes in the photocatalytic activity toward proton or methyl viologen reduction.

Effect of modulator connectivity on promoting defectivity in titanium-organic frameworks

The recognition of defect chemistry as a true synthetic tool for targeted creation of defects and controllable performance remains limited by the pool of frameworks explored. The value of defect engineering in controlling the properties of defective frameworks has been beautifully exemplified and largely demonstrated with UiO-type materials based on Zr(iv) nodes. However, titanium–organic frameworks remain largely unexplored in this context arguably due to the complex chemistry in solution of Ti(iv) and the difficulties in growing crystalline solids. We report a systematic study on the ability of mono- and dicarboxylic modulators (benzoic and isophthalic acid) to promote defect creation in the heterometallic Ti-MOF of the MUV-10 family. Our results indicate that both acids behave as capping modulators at high concentrations, but isophthalic acid is a more efficient defect promoter, yielding defective phases with nearly 40% of missing linkers. Our computational results suggest that this difference cannot be solely ascribed to relative changes in acidity but to the ability of this bidentate linker in compensating the structural distortion and energy penalty imposed by breaking the connectivity of the underlying framework.

The connectivity of mono- and dicarboxylic modulators controls their ability to promote defects in the titanium framework MUV-10.

Design of a heterometallic Zn/Ca-MOF decorated with alkoxy groups on the pore surface exhibiting high fluorescence sensing performance for Fe3+ and Cr2O72−

Reported herein is a heterometallic Zn/Ca-MOF decorated with alkoxy groups on the pore surface exhibiting high fluorescence sensing performance for Fe³⁺ and Cr₂O₇²⁻.