New Neutral Nickel and Palladium Sandwich Catalysts: Synthesis of Ultra-High Molecular Weight Polyethylene (UHMWPE) via Highly Controlled Polymerization and Mechanistic Studies of Chain Propagation

Cis-Chelating Diphosphanes for Intracavity Nickel(II)-Catalyzed Ethylene Oligomerization

Four cis-chelating diphosphanes derived from cyclodextrins (CDs), each featuring a distinct intracavity environment, compel NiII or PdII metal centers to reside within α- or β-CD cavities. Nickel(II) complexes of these metal-confining ligands act as active catalysts in ethylene oligomerization upon activation with modified methylaluminoxane (MMAO). The size of the cavity and the position of the P2Ni fragment relative to the cavity affect both the activity and selectivity of the reaction. In all instances, 1-butene is the major product (up to 98% C4 products and 90% 1-butene within the C4 fraction). Extensive theoretical studies with state-of-the-art methods carried out on the most selective system suggest that the CD cavity restricts isomerization pathways by limiting the mobility of the coordinated olefin in this constrained supramolecular environment, thereby enhancing α-olefin formation.

Thermally stable C2-symmetric α-diimine nickel precatalysts for ethylene polymerization: semicrystalline to amorphous PE with high tensile and elastic properties

In α-diimine nickel catalyst-mediated ethylene polymerization, adjusting catalytic parameters such as steric and electronic factors, as well as spectator ligands, offers an intriguing approach for tailoring the thermal and physical properties of the resulting products. This study explores two sets of C2-symmetric α-diimine nickel complexes-nickel bromide and nickel chloride-where ortho-steric and electronic substituents, as well as nickel halide, were varied to regulate simultaneously chain walking, chain transfer, and the properties of the polymers produced. These complexes were activated in situ with Et2AlCl, resulting in exceptionally high catalytic activities (in the level of 106-107 g (PE) mol-1 (Ni) h-1) under all reaction conditions. Nickel bromide complexes, with higher ortho-steric hindrance, exhibited superior catalytic activity compared to their less hindered counterparts, whereas the reverse was observed for complexes containing chloride. Increased steric hindrance in both sets of complexes facilitated higher polymer molecular weights and promoted chain walking reactions at lower reaction temperature (40 °C), while the effect became less pronounced at higher temperature (100 °C). However, the electron-withdrawing effect of ortho-substituents hindered the rate of monomer insertion, chain propagation, and chain walking reactions, leading to the synthesis of semi-crystalline polyethylene with an exceptionally high melt temperature of 134.6 °C and a high crystallinity of up to 31.9%. Most importantly, nickel bromide complexes demonstrated significantly higher activity compared to their chloride counterparts, while the latter yielded polymers with higher molecular weights and increased melt temperatures. These high molecular weights, coupled with controlled branching degrees, resulted in polyethylenes with excellent tensile strength (up to 13.9 MPa) and excellent elastic properties (up to 81%), making them suitable for a broad range of applications.

Sulfonated porous organic polymer supported Ziegler-Natta catalysts for the synthesis of ultra-high molecular weight polyethylene

Porous organic polymers (POPs) are attracting attention for their easy functionalization and potential as catalyst supports in olefin polymerization. In this study, sulfonated POP (s-POP) supported Ziegler-Natta catalysts were used for ethylene polymerization, producing ultra-high molecular weight polyethylene, with M ν reaching up to 6.83 × 106 g mol-1. The maximum M ν of polyethylene was achieved by Cat-3 with DIBP as the internal donor, albeit with a partial loss of catalytic activity. Polymerization conditions also play a pivotal role in determining the molecular weight of polyethylene. Hydrogen, being the most efficient chain transfer agent, can decrease the molecular weight to 9.68 × 104 g mol-1 at higher hydrogen concentrations ([H2] : [C2H4] = 0.83), and the s-POP-supported ethylene polymerization catalysts were observed to exhibit high sensitivity to hydrogen response. The effects of polymerization temperature, [Al] : [Ti] molar ratio, and ethylene pressure on ethylene polymerization were thoroughly investigated.

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts

Ultra-high molecular weight polyethylenes (UHMWPEs) are significant engineering plastics for their unique properties, such as high impact resistance, abrasion resistance, weatherability, lubricity, and chemical resistance. Consequently, developing a suitable catalyst is vital in facilitating the preparation of UHMWPE. The late transition metal catalysts have emerged as effective catalysts in producing UHMWPE due to their availability, enhanced tolerance to heteroatom groups, active polymerization characteristics, and good copolymerization ability with polar monomers. In this review, we mainly focus on the late transition metal catalysts, summarizing advancements in their application over the past decade. Four key metals (Ni, Pd, Fe, Co) for generating linear or branched UHMWPE will be primarily explored in this manuscript.

Ethylene Polymerizations Catalyzed by Fluorinated "Sandwich" Diimine-Nickel and Palladium Complexes

Nickel and palladium complexes bearing "sandwich" diimine ligands with perfluorinated aryl caps have been synthesized, characterized, and explored in ethylene polymerization reactions. The X-ray crystallographic analysis of the precatalysts 16 and 6b shows differences from their nonfluorinated analogues 17 and 19, with the perfluorinated aryl caps centered precisely over the nickel and palladium centers, which results in higher buried volumes of the metal centers relative to the nonfluorinated analogues. The sandwich diimine-palladium complexes 5a and 5b containing perfluorinated aryl caps polymerize ethylene in a controlled fashion with activities that are substantially increased compared with their nonfluorinated analogues. Migratory insertion rates in relevant methyl ethylene complexes agree with the activities exhibited in bulk polymerization experiments. DFT studies suggest that facility of ethylene rotation from its preferred orientation perpendicular to the Pd-alkyl bond into a parallel in-plane conformation contributes to the higher polymerization activity for 5b relative to 18a. For these palladium systems, polymer molecular weights can be controlled via hydrogen addition (hydrogenolysis), which is unusual for late-transition-metal-catalyzed olefin polymerizations with no catalyst deactivation occurring. Sandwich diimine-nickel complexes 6a and 6b with perfluorinated aryl caps show ethylene polymerization activities that are about half of those of classical tetraisopropyl-substituted catalyst 2 but again are more active than the analogous nonfluorinated sandwich complexes. Ethylene polymerizations exhibit living behavior, and branched ultrahigh-molecular-weight polyethylenes (UHMWPEs) with very low-molecular-weight distributions (less than 1.1) are obtained. The activated nickel catalysts are stable in the absence of monomer and show good long-term stability at 25 °C.

Flexible Axial Shielding Strategy for Improving Ethylene (Co)polymerization with 8-Cycloalkylnaphthyl α-Diimine Catalysts

8-aryl or alkyl-naphthyl substituents are widely used as an effective axial shielding strategy for the suppression of chain transfer in late-transition metal-catalyzed ethylene (co)polymerization to yield high molecular weight polyethylene and copolymers. In this study, two 8-cycloalkylnaphthyl acenaphthene-based α-diimine ligands and the corresponding four nickel and palladium complexes were designed and synthesized to explore the effect of axial flexible shielding on ethylene (co)polymerization. In ethylene polymerization, the nickel complexes displayed high activities (up to 1.99 × 106 g mol-1 h-1) and generated lightly branched (34-54/1000 C) polyethylenes with high molecular weights (up to Mn = 1075 kg/mol), whereas the corresponding palladium complexes exhibited moderate activities (level of 104 g mol-1 h-1), producing highly branched (111-125/1000 C) polyethylenes with high molecular weights (up to Mn = 37.6 kg/mol). Highly branched (110-123/1000 C) E-MA copolymers with moderate insertion ratios (1.97-5.56 mol %) were produced by these palladium complexes in ethylene/methyl acrylate (MA) copolymerization. In addition, the size of the 8-cycloalkyl ring in these α-diimine catalysts strongly influences the ethylene (co)polymerization. Compared to cyclopentyl groups, cyclohexyl groups are more effective in suppressing chain transfer reactions in the polymerization of ethylene and the copolymerization of ethylene and MA, leading to higher molecular weight polyethylene and E-MA copolymers. Most interestingly, compared to the reported rigid planar 8-arylnaphthyl catalysts, the flexible 8-cyclohexylnaphthyl catalysts exhibited higher activity and produced higher molecular weight polyethylene in ethylene polymerization. Moreover, in nickel-catalyzed ethylene polymerization, the cyclohexyl catalyst produced significantly reduced branched polyethylene, while in palladium-catalyzed ethylene (co)polymerization, the cyclohexyl catalyst produced more highly branched polyethylene and copolymers. In contrast to the previously reported flexible 8-butylnaphthyl nickel catalysts, the 8-cycloalkylnaphthyl catalysts reported in this work yielded polyethylene with narrow unimodal molecular weight distributions.

"Sandwich" Diimine-Copper Catalyzed Trifluoroethylation and Pentafluoropropylation of Unactivated C(sp3 )-H Bonds by Carbene Insertion

We report here "sandwich"-diimine copper complex-catalyzed trifluoroethylation and pentafluoropropylation of unactivated C(sp3 )-H bonds in alkyl esters, halides, and protected amines by employing CF3 CHN2 and CF3 CF2 CHN2 reagents. Reactions proceed in dichloromethane solvent at room temperature. Identical C-H functionalization conditions and stoichiometries are employed for generality and convenience. Selectivities for C-H insertions are higher for compounds possessing stronger electron-withdrawing substituents. Preliminary mechanistic studies point to a mechanism involving a pre-equilibrium forming a "sandwich"-diimine copper-CF3 CHN2 complex followed by rate-determining loss of nitrogen affording the reactive copper carbene. It reacts with trifluoromethyldiazomethane about 6.5 times faster than with 1-fluoroadamantane explaining the need for slow addition of the diazo compound.

Deciphering the Olefin Isomerization-Polymerization Paradox of Palladium(II) Diimine Catalysts: Discovery of Simultaneous and Independent Pathways of Olefin Isomerization and Living Polymerization

This work elucidates a long-standing unexplained paradox commonly observed within the polymerization of α-olefin using palladium (Pd)(II)-diimine catalysts, in which isomerization and living polymerization of α-olefins are both observed. With a classical mechanistic understanding of these complexes, this behavior is often dismissed and interpreted as experimental error. Herein, we present a comprehensive mechanistic investigation into this phenomenon that supports the existence of a novel mechanistic pathway for Pd(II)-diimine complexes. Part one of the mechanistic study lays the foundation of the proposed mechanism, in which neutral Pd(II)-diimine complexes were found to exhibit a moderate to good catalytic activity for olefin isomerization of α-olefins despite the established notion that catalyst activation is required. Extensive experimental and computational studies reveal the possibility of a partial dissociation of the diimine ligand, which frees up one coordination site and enables coordination-insertion. This finding is significant as the coexistence of two reactive coordination sites at the palladium center becomes a valid proposal for the activated cationic Pd(II)-diimine complexes. In part two, we examined and validated the simultaneously observed α-olefin isomerization and living polymerization using the cationic Pd(II)-diimine catalyst, which supports the presence of two independent reaction pathways of isomerization and polymerization, respectively. Moreover, the addition of a strong Lewis acid, such as AlCl₃, accelerates the ligand dissociation and the consequential isomerization as it weakens the palladium-nitrogen bond through competitive binding. In part three, Lewis acid-triggered olefin isomerization-polymerization is employed to prepare living olefinic block copolymers and further synthesize novel polyolefin-polar block copolymers with unique architectures, distinct levels of branching, crystallinity, and polar functionality in a one-pot manner.

New Ni(II)-Ni(II) Dinuclear Complex, a Resting State of the (α-diimine)NiBr2/AlMe3 Catalyst System for Ethylene Polymerization

A novel room-temperature stable diamagnetic nickel complex 2 was detected upon activation of Brookhart-type ethylene polymerization pre-catalyst LNiBr2 (1, L = 1,4-bis-2,4,6-trimethylphenyl-2,3-dimethyl-1,4-diazabuta-1,3-diene) with AlMe3. Using in situ 1H, 2H, and 13C NMR spectroscopy, as well as DFT calculations, this species has been identified as an antiferromagnetically coupled homodinuclear complex [LNiII(μ-Me)(μ-CH2)NiIIL]+Br−. Its behavior in the reaction solution is characteristic of the resting state of nickel catalyzed ethylene polymerization.

Controlled Access to Four- and Six-Membered Palladacycles via Modifying Donor Abilities of β-Ketiminato Ligands ("NacAcs")

The synthesis of Pd complexes of the type [PdBr(ⁱPr₂-bimy)(NacAc)] (NacAc = β-ketiminate, ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene) was attempted, in a continuing effort to quantify donor abilities of chelating β-ketiminate ligands using the Huynh electronic parameter for bidentate donors (HEP2). Subtle variation of N-substituents on the NacAc backbone was discovered to induce a drastic change in the preferred chelating mode, in that the commonly encountered κ²-N,O-six-membered palladacycles were observed with R = Me and Et, while the unusual κ²-C,N-four-membered palladacycles were isolated with R = ⁱPr, Cy, and ^tBu. Computational studies subsequently corroborated these findings, in the form of an overall exergonic six-to-four-membered ring contraction process and a lower associated activation energy for the three more electron-donating alkyl moieties. This trend in the established energy profiles can be attributed to a reduced HOMO-LUMO gap in the corresponding optimized structures of the six-membered ring complexes.

Customizing Polymers by Controlling Cation Switching Dynamics in Non-Living Polymerization

Controlling the chain growth process in non-living polymerization reactions is difficult because chain termination typically occurs faster than the time it takes to apply an external trigger. To overcome this limitation, we have developed a strategy to regulate non-living polymerizations by exploiting the chemical equilibria between a metal catalyst and secondary metal cations. We have prepared two nickel phenoxyphosphine-polyethylene glycol variants, one with 2-methoxyphenyl (Ni1) and another with 2,6-dimethoxyphenyl (Ni2) phosphine substituents. Ethylene polymerization studies using these complexes in the presence of alkali salts revealed that chain growth is strongly dependent on electronic effects, whereas chain termination is dependent on both steric and electronic effects. By adjusting the solvent polarity, we can favor polymerizations via non-switching or dynamic switching modes. For example, in a 100:0.2 mixture of toluene/diethyl ether, reactions of Ni1 and both Li⁺ and Na⁺ cations in the presence of ethylene yielded bimodal polymers with different relative fractions depending on the Li⁺/Na⁺ ratio used. In a 98:2 mixture of toluene/diethyl ether, reactions of Ni2 and Cs⁺ in the presence of ethylene generated monomodal polyethylene with dispersity <2.0 and increasing molecular weight as the amount of Cs⁺ added increased. Solution studies by NMR spectroscopy showed that cation exchange between the nickel complexes and alkali cations in 98:2 toluene/diethyl ether is fast on the NMR time scale, which supports our proposed dynamic switching mechanism.

Highly Active and Thermally Robust Nickel Enolate Catalysts for the Synthesis of Ethylene-Acrylate Copolymers

The insertion copolymerization of polar olefins and ethylene remains a significant challenge in part due to catalysts' low activity and poor thermal stability. Herein we demonstrate a strategy toward addressing these obstacles through ligand design. Neutral nickel phosphine enolate catalysts with large phosphine substituents reaching the axial positions of Ni achieve activity of up to 7.7×10³  kg mol^-1  h^-1 (efficiency >35×10³  g copolymer/g Ni) at 110 °C, notable for ethylene/acrylate copolymerization. NMR analysis of resulting copolymers reveals highly linear microstructures with main-chain ester functionality. Structure-performance studies indicate a strong correlation between axial steric hindrance and catalyst performance.

α-Diimine Ni-Catalyzed Ethylene Polymerizations: On the Role of Nickel(I) Intermediates

Nickel(II) complexes with bidentate N,N-α-diimine ligands constitute a broad class of promising catalysts for the synthesis of branched polyethylenes via ethylene homopolymerization. Despite extensive studies devoted to the rational design of new Ni(II) α-diimines with desired catalytic properties, the polymerization mechanism has not been fully rationalized. In contrast to the well-characterized cationic Ni(II) active sites of ethylene polymerization and their precursors, the structure and role of Ni(I) species in the polymerization process continues to be a “black box”. This perspective discusses recent advances in the understanding of the nature and role of monovalent nickel complexes formed in Ni(II) α-diimine-based ethylene polymerization catalyst systems.

Neutral Unsymmetrical Coordinated Cyclophane Polymerization Catalysts

Cyclophane structures can control steric pressure in the otherwise open spaces of square‐planar d⁸‐metal catalysts. This elegant concept was so far limited to symmetrical coordinated metals. We report how a cyclophane motif can be generated in ligands that chelate via two different donors. An ancillary second imine in the versatile κ²‐N,O‐salicylaldiminato catalyst type enables ring closure via olefin metathesis and selective double bond hydrogenation to yield a 30‐membered ring efficiently. Experimental and theoretical analyses show the ancillary imine is directed away from the active site and inert for catalysis. In ethylene polymerization the cyclophane catalyst is more active and temperature stable vs. an open structure reference, notably also in polar solvents. Increased molecular weights and decreased degrees of branching can be traced to an increased energy of sterically demanding transition states by the encircling cyclophane while chain propagation remains highly efficient.

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n ; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w =8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w =20-50 kDa).

Hydrogen-Bonding-Induced Heterogenization of Nickel and Palladium Catalysts for Copolymerization of Ethylene with Polar Monomers

The practical synthesis of polar-functionalized polyolefins using transition-metal-catalyzed copolymerization of olefins with polar monomers is a challenge; the use of heterogeneous catalysts is little explored. Herein, we report the synthesis of heterogeneous naphthoquinone-based nickel (Ni/SiO₂ ) and palladium (Pd/SiO₂ ) catalysts through hydrogen bonding interactions of the ligands with the silica surface. Ni/SiO₂ exhibits high activities (up to 2.65×10⁶  g mol^-1  h^-1 ) during the copolymerization of ethylene with 5-hexene-1-yl-acetate, affording high-molecular-weight (M_n up to 630 000) polar-functionalized semicrystalline polyethylene (comonomer incorporation up to 2.8 mol %), along with great morphology control. The resulting copolymers possess improved surface properties and great mechanical properties. Pd/SiO₂ can mediate ethylene copolymerization with polar monomers with moderate activity to produce high-molecular-weight copolymers with tunable comonomer incorporation.

Modulation of N^N'-bidentate chelating pyridyl-pyridylidene amide ligands offers mechanistic insights into Pd-catalysed ethylene/methyl acrylate copolymerisation

The efficient copolymerisation of functionalised olefins with alkenes continues to offer considerable challenges to catalyst design. Based on recent work using palladium complexes containing a dissymmetric N^N'-bidentate pyridyl-PYA ligand (PYA = pyridylidene amide), which showed a high propensity to insert methyl acrylate, we have here modified this catalyst structure by inserting shielding groups either into the pyridyl fragment, or the PYA unit, or both to avoid fast β-hydrogen elimination. While a phenyl substituent at the pyridyl side impedes catalytic activity completely and leads to an off-cycle cyclometallation, the introduction of an ortho-methyl group on the PYA side of the N^N'-ligand was more prolific and doubled the catalytic productivity. Mechanistic investigations with this ligand system indicated the stabilisation of a 4-membered metallacycle intermediate at room temperature, which has previously been postulated and detected only at 173 K, but never observed at ambient temperature so far. This intermediate was characterised by solution NMR spectroscopy and rationalises, in part, the formation of α,β-unsaturated esters under catalytic conditions, thus providing useful principles for optimised catalyst design.

Flexible "Sandwich" (8-Alkylnaphthyl α-Diimine) Catalysts in Insertion Polymerization

8-Arylnaphthyl substituents are privileged motifs frequently integrated into late-transition-metal catalysts, endowing them with an ability to retard chain transfer in ethylene polymerization. In this contribution, we disclose a sort of novel α-diiminenickel and -palladium complexes containing flexible 8-alkylnaphthyl in lieu of rigid 8-arylnaphthyl and their catalytic performance in ethylene polymerization. An interesting feature of these 8-alkylnaphthyl-substituted α-(diimine)PdMeCl complexes is that they present as a mixture of syn and anti isomers (syn:anti = ca. 1:1 ratio, determined by ¹H and ¹³C NMR spectroscopy). In ethylene polymerization, these nickel complexes displayed high activity (up to 3.37 × 10⁶ g mol^-1 h^-1) and generated branched polyethylenes with broad or bimodal molecular weight distributions (4.6-29.3), while the corresponding palladium complexes exhibited moderate activity, producing highly branched polyethylenes with unimodal and narrow molecular weight distributions (<1.8). In ethylene (E)/methyl acrylate (MA) copolymerization, highly branched E-MA copolymers with considerable MA incorporations were achieved by these palladium complexes. Most interestingly, compared to rigid 8-arylnaphthyl-substituted α-diiminenickel and -palladium complexes, the flexible 8-alkylnaphthyl ones showed significantly improved activity and generated lower or comparable molecular weight polyethylenes or E-MA copolymers.

Investigations on the Ethylene Polymerization with Bisarylimine Pyridine Iron (BIP) Catalysts

The kinetics and terminations of ethylene polymerization, mediated by five bisarylimine pyridine (BIP) iron dichloride precatalysts, and activated by large amounts of methyl aluminoxane (MAO) was studied. Narrow distributed paraffins from initially formed aluminum polymeryls and broader distributed 1-polyolefins and (bimodal) mixtures, thereof, were obtained after acidic workup. The main pathway of olefin formation is beta-hydrogen transfer to ethylene. The rate of polymerization in the initial phase is inversely proportional to the co-catalyst concentration for all pre-catalysts; a first-order dependence was found on ethylene and catalyst concentrations. The inhibition by aluminum alkyls is released to some extent in a second phase, which arises after the original methyl groups are transformed into n-alkyl entities and the aluminum polymeryls partly precipitate in the toluene medium. The catalysis is interpretable in a mechanism, wherein, the relative rate of chain shuttling, beta-hydrogen transfer and insertion of ethylene are determining the outcome. Beta-hydrogen transfer enables catalyst mobility, which leads to a (degenerate) chain growth of already precipitated aluminum alkyls. Stronger Lewis acidic centers of the single site catalysts, and those with smaller ligands, are more prone to yield 1-olefins and to undergo a faster reversible alkyl exchange between aluminum and iron.

Efficient Suppression of Chain Transfer and Branching via Cs -Type Shielding in a Neutral Nickel(II) Catalyst

An effective shielding of both apical positions of a neutral NiII active site is achieved by dibenzosuberyl groups, both attached via the same donors' N-aryl group in a Cs -type arrangement. The key aniline building block is accessible in a single step from commercially available dibenzosuberol. This shielding approach suppresses chain transfer and branch formation to such an extent that ultrahigh molecular weight polyethylenes (5×106  g mol-1 ) are accessible, with a strictly linear microstructure (<0.1 branches/1000C). Key features of this highly active (4.3×105  turnovers h-1 ) catalyst are an exceptionally facile preparation, thermal robustness (up to 90 °C polymerization temperature), ability for living polymerization and compatibility with THF as a polar reaction medium.