Giant Zeeman Splitting for Monolayer Nanosheets at Room Temperature

Strong Coupling between Mn2+ Dopants and CdSe Nanoplatelets Enables Charge-Transfer Transition and Dual Emission

Doping transitional metals into colloidal nanocrystals can significantly modify their excited-state dynamics and enrich their optical and magneto-optical functionalities. Here we synthesize Mn-doped CdSe nanoplatelets and investigate their excited-state dynamics and light-emission mechanisms. Extensive characterizations suggest that Mn2+ ions are situated near the surface-region of the nanoplatelets. The atomic thinness of nanoplatelets allows for a strong host-dopant coupling, manifested as broadband charge-transfer absorption and emission (near 575 nm) between the host valence band and the dopant d-orbitals. Photoexcitation of the host leads to rapid (a few ps) electron transfer from the conduction band to the d-orbitals, and the resultant charge-transfer state decays within a few ns not only through charge-transfer emission but also generating an excited-state species (likely Mn-Mn dimer) with a characteristic near-infrared emission. These novel photophysics and photochemistry uncovered for quasi-two-dimensional Mn-doped nanocrystals form the basis for optical, magneto-optical, and energy conversion applications using such materials.

Electron-phonon coupling and coherent energy superposition induce spin-sensitive orbital degeneracy for enhanced acidic water oxidation

The development of acid-stable water oxidation electrocatalysts is crucial for high-performance energy conversion devices. Different from traditional nanostructuring, here we employ an innovative microwave-mediated electron-phonon coupling technique to assemble specific Ru atomic patterns (instead of random Ru-particle depositions) on Mn0.99Cr0.01O2 surfaces (RuMW-Mn1-xCrxO2) in RuCl3 solution because hydrated Ru-ion complexes can be uniformly activated to replace some Mn sites at nearby Cr-dopants through microwave-triggered energy coherent superposition with molecular rotations and collisions. This selective rearrangement in RuMW-Mn1-xCrxO2 with particular spin-differentiated polarizations can induce localized spin domain inversion from reversed to parallel direction, which makes RuMW-Mn1-xCrxO2 demonstrate a high current density of 1.0 A cm-2 at 1.88 V and over 300 h of stability in a proton exchange membrane water electrolyzer. The cost per gallon of gasoline equivalent of the hydrogen produced is only 43% of the 2026 target set by the U.S. Department of Energy, underscoring the economic significance of this nanotechnology.

Zeeman Effect-Boosted Spin-Polarized Band Splitting in Diluted Magnetic Photocatalysis Semiconductors for Efficient CO2 Photoreduction

Magnetic field regulation is an effective strategy to improve the photocatalytic activity of magnetic semiconductor photocatalysts, but it is not suitable for widely used nonmagnetic photocatalytic semiconductors. Here, we report a Zeeman effect-driven spin-polarized band splitting phenomenon in diluted magnetic semiconductors that show efficient photocatalytic CO2 reduction under visible-light irradiation. A flexible Ni2+-doped BaTiO3 nanofiber film is used as the diluted magnetic semiconductor model to prove this concept. The interstitial Ni2+ dopant induces the spin-polarized bands in Ni-BaTiO3 nanofibers to split under light excitation, generating spin-excited electrons and holes. This Zeeman effect induced by the magnetic field is more obvious since it intensifies the spin-polarized band splitting and generates more spin-excited electrons and holes, suppressing the carrier recombination and extending the carrier lifetime for CO2 photoreduction. As a result, the evolution rates of CO and CH4 are as high as 86.47 and 96.06 μmol/g/h under a small magnetic field of 50 mT. The proposed mechanism of Zeeman effect-driven spin-polarized band splitting is feasible to improve the CO2 photoreduction efficiency of broadly applied diluted magnetic semiconductors.

Potassium Iodide Doping for Vacancy Substitution and Dangling Bond Repair in InP Core-Shell Quantum Dots

This work highlights the novel approach of incorporating potassium iodide (KI) doping during the synthesis of In0.53P0.47 core quantum dots (QDs) to significantly reduce the concentration of vacancies (i.e., In vacancies; VIn-) within the bulk of the core QD and inhibit the formation of InPOx at the core QD-Zn0.6Se0.4 shell interfaces. The photoluminescence quantum yield (PLQY) of ~97% and full width at half maximum (FWHM) of ~40 nm were achieved for In0.53P0.47/Zn0.6Se0.4/Zn0.6Se0.1S0.3/Zn0.5S0.5 core/multi-shell QDs emitting red light, which is essential for a quantum-dot organic light-emitting diode (QD-OLED) without red, green, and blue crosstalk. KI doping eliminated VIn- in the core QD bulk by forming K+-VIn- substitutes and effectively inhibited the formation of InPO4(H2O)2 at the core QD-Zn0.6Se0.4 shell interface through the passivation of phosphorus (P)-dangling bonds by P-I bonds. The elimination of vacancies in the core QD bulk was evidenced by the decreased relative intensity of non-radiative unpaired electrons, measured by electron spin resonance (ESR). Additionally, the inhibition of InPO4(H2O)2 formation at the core QD and shell interface was confirmed by the absence of the {210} X-ray diffraction (XRD) peak intensity for the core/multi-shell QDs. By finely tuning the doping concentration, the optimal level was achieved, ensuring maximum K-VIn- substitution, minimal K+ and I- interstitials, and maximum P-dangling bond passivation. This resulted in the smallest core QD diameter distribution and maximized optical properties. Consequently, the maximum PLQY (~97%) and minimum FWHM (~40 nm) were observed at 3% KI doping. Furthermore, the color gamut of a QD-OLED display using R-, G-, and B-QD functional color filters (i.e., ~131.1%@NTSC and ~98.2@Rec.2020) provided a nearly perfect color representation, where red-light-emitting KI-doped QDs were applied.

Inducing spin polarization via Co doping in the BiVO4 cell to enhance the built-in electric field for promotion of photocatalytic CO2 reduction

The efficiency of CO2 photocatalytic reduction is severely limited by inefficient separation and sluggish transfer. In this study, spin polarization was induced and built-in electric field was strengthened via Co doping in the BiVO4 cell to boost photocatalytic CO2 reduction. Results showed that owing to the generation of spin-polarized electrons upon Co doping, carrier separation and photocurrent production of the Co-doped BiVO4 were enhanced. CO production during CO2 photocatalytic reduction from the Co-BiVO4 was 61.6 times of the BiVO4. Notably, application of an external magnetic field (100 mT) further boosted photocatalytic CO2 reduction from the Co-BiVO4, with 68.25 folds improvement of CO production compared to pristine BiVO4. The existence of a built-in electric field (IEF) was demonstrated through density functional theory (DFT) simulations and kelvin probe force microscopy (KPFM). Mechanism insights could be elucidated as follows: doping of magnetic Co into the BiVO4 resulted in increased the number of spin-polarized photo-excited carriers, and application of a magnetic field led to an augmentation of intrinsic electric field due to a dipole shift, thereby extending carrier lifetime and suppressing charges recombination. Additionally, HCOO- was a crucial intermediate in the process of CO2RR, and possible pathways for CO2 reduction were proposed. This study highlights the significance of built-in electric fields and the important role of spin polarization for promotion of photocatalytic CO2 reduction.

Spin Polarization: A New Frontier in Efficient Photocatalysis for Environmental Purification and Energy Conversion

As a promising strategy to improve photocatalytic efficiency, spin polarization has attracted enormous attention in recent years, which could be involved in various steps of photoreaction. The Pauli repulsion principle and the spin selection rule dictate that the behavior of two electrons in a spatial eigenstate is based on their spin states, and this fact opens up a new avenue for manipulating photocatalytic efficiency. In this review, recent advances in modulating the photocatalytic activity with spin polarization are systematically summarized. Fundamental insights into the influence of spin-polarization effects on photon absorption, carrier separation, and migration, and the behaviors of reaction-related substances from the photon uptake to reactant desorption are highlighted and discussed in detail, and various photocatalytic applications for environmental purification and energy conversion are presented. This review is expected to deliver a timely overview of the recent developments in spin-polarization-modulated photocatalysis for environmental purification and energy conversion in terms of their practical applications.

Design of Organic-Inorganic Hybrid Heterostructured Semiconductors via High-Throughput Materials Screening for Optoelectronic Applications

Organic-inorganic hybrid semiconductors, of which organometal halide perovskites are representative examples, have drawn significant research interest as promising candidates for next-generation optoelectronic applications. This interest is mainly ascribed to the emergent optoelectronic properties of the hybrid semiconductors that are distinct from those of their purely inorganic and organic counterparts as well as different material fabrication strategies and the other material (e.g., mechanical) properties that combine the advantages of both. Herein, we present a high-throughput first-principles material screening study of the hybrid heterostructured semiconductors (HHSs) that differ entirely from organometal halide perovskite hybrid ion-substituting semiconductors. HHSs crystallize as superlattice structures composed of inorganic tetrahedrally coordinated semiconductor sublayers and organic sublayers made of bidentate chain-like molecules. By changing the composition (e.g., IV, III-V, II-VI, I-III-VI₂ semiconductor) and polymorph (e.g., wurtzite and zinc-blende) of the inorganic components, the type of organic molecules (e.g., ethylenediamine, ethylene glycol, and ethanedithiol), and the thickness of the composing layers across 234 candidate HHSs, we investigated their thermodynamic, electronic structure, and optoelectronic properties. Thermodynamic stability analysis indicates the existence of 96 stable HHSs beyond the ZnTe/ZnSe-based ones synthesized experimentally. The electronic structure and optoelectronic properties of HHSs can be modulated over a wide range by manipulating their structural variants. A machine learning approach was further applied to the high-throughput calculated data to identify the critical descriptors determining thermodynamic stability and electronic band gap. Our results indicate promising prospects and provide valuable guidance for the rational design of organic-inorganic hybrid heterostructured semiconductors for potential optoelectronic applications.

Spin-Polarized Photocatalytic CO2 Reduction of Mn-Doped Perovskite Nanoplates

"Spin" has been recently reported as an important degree of electronic freedom to improve the performance of electrocatalysts and photocatalysts. This work demonstrates the manipulations of spin-polarized electrons in CsPbBr₃ halide perovskite nanoplates (NPLs) to boost the photocatalytic CO₂ reduction reaction (CO₂RR) efficiencies by doping manganese cations (Mn²⁺) and applying an external magnetic field. Mn-doped CsPbBr₃ (Mn-CsPbBr₃) NPLs exhibit an outstanding photocatalytic CO₂RR compared to pristine CsPbBr₃ NPLs due to creating spin-polarized electrons after Mn doping. Notably, the photocatalytic CO₂RR of Mn-CsPbBr₃ NPLs is significantly enhanced by applying an external magnetic field. Mn-CsPbBr₃ NPLs exhibit 5.7 times improved performance of photocatalytic CO₂RR under a magnetic field of 300 mT with a permanent magnet compared to pristine CsPbBr₃ NPLs. The corresponding mechanism is systematically investigated by magnetic circular dichroism spectroscopy, ultrafast transient absorption spectroscopy, and density functional theory simulation. The origin of enhanced photocatalytic CO₂RR efficiencies of Mn-CsPbBr₃ NPLs is due to the increased number of spin-polarized photoexcited carriers by synergistic doping of the magnetic elements and applying a magnetic field, resulting in prolonged carrier lifetime and suppressed charge recombination. Our result shows that manipulating spin-polarized electrons in photocatalytic semiconductors provides an effective strategy to boost photocatalytic CO₂RR efficiencies.

Atomically Thin 2D van der Waals Magnetic Materials: Fabrications, Structure, Magnetic Properties and Applications

Two-dimensional (2D) van der Waals (vdW) magnetic materials are considered to be ideal candidates for the fabrication of spintronic devices because of their low dimensionality, allowing the quantization of electronic states and more degrees of freedom for device modulation. With the discovery of few-layer Cr2Ge2Te6 and monolayer CrI3 ferromagnets, the magnetism of 2D vdW materials is becoming a research focus in the fields of material science and physics. In theory, taking the Heisenberg model with finite-range exchange interactions as an example, low dimensionality and ferromagnetism are in competition. In other words, it is difficult for 2D materials to maintain their magnetism. However, the introduction of anisotropy in 2D magnetic materials enables the realization of long-range ferromagnetic order in atomically layered materials, which may offer new effective means for the design of 2D ferromagnets with high Curie temperature. Herein, current advances in the field of 2D vdW magnetic crystals, as well as intrinsic and induced ferromagnetism or antiferromagnetism, physical properties, device fabrication, and potential applications, are briefly summarized and discussed.

Enhanced Photodegradation in Metal Oxide Nanowires with Co-Doped Surfaces under a Low Magnetic Field

This work demonstrated the enhanced photodegradation (PD) resulting from Co-rich doping of ZnO nanowire (NW) surfaces (Co²⁺/ZnO NWs) prepared by combining Co sputtering on ZnO NWs and immersion in deionized water to exploit the hydrophilic-hydrophobic transitions on the ZnO surfaces resulting from Co atom diffusion. Because of the controllable spin-dependent density of states (DOS) induced by Co²⁺, the PD of methylene blue dye can be enhanced by approximately 90% (when compared with bare ZnO NWs) by using a conventional permanent magnet with a relatively low magnetic field strength of approximately 0.15 T. The reliability of spin polarization-modulation attained through surface doping, based on the magnetic response observed from X-ray absorption measurements and magnetic circular dichroism, provides an opportunity to create highly efficient catalysts by engineering surfaces and tailoring their spin-dependent DOS.