Molecularly Imprinted Synthetic Glucosidase for the Hydrolysis of Cellulose in Aqueous and Nonaqueous Solutions

Renin imprinted Poly(methyldopa) for biomarker detection and disease therapy

Conventional molecularly imprinted polymers (MIPs) perform their functions principally depended on their three dimensional (3D) imprinted cavities (recognition sites) of templates. Here, retaining the function of recognition sites resulted from the imprinting of template molecules, the role of functional monomers is explored and expanded. Briefly, a class of dual-functional renin imprinted poly(methyldopa) (RMIP) is prepared, consisting of a drug-type function monomer (methyldopa, clinical high blood pressure drug) and a corresponding disease biomarker (renin, biomarker for high blood pressure disease). To boost target-to-receptor binding ratio and sensitivity, the microstructure of recognition sites is beforehand calculated and designed by Density Functional Theory calculations, and the whole interfacial structure, property and thickness of RMIP film is regulated by adjusting the polymerization techniques. The dual-functional applications of RMIP for biomarker detection and disease therapy in vivo is explored. Such RMIP-based biosensors achieves highly sensitive biomarker detection, where the LODs reaches down to 1.31 × 10-6 and 1.26 × 10-6 ng mL-1 for electrochemical and chemical polymers, respectively, and the application for disease therapy in vivo has been verified where displays the obviously decreased blood pressure values of mice. No acute and long-term toxicity is found from the pathological slices, declaring the promising clinical application potential of such engineered RMIP nanostructure.

Opportunities and challenges for plastic depolymerization by biomimetic catalysis

Plastic waste has imposed significant burdens on the environment. Chemical recycling allows for repeated regeneration of plastics without deterioration in quality, but often requires harsh reaction conditions, thus being environmentally unfriendly. Enzymatic catalysis offers a promising solution for recycling under mild conditions, but it faces inherent limitations such as poor stability, high cost, and narrow substrate applicability. Biomimetic catalysis may provide a new avenue by combining high enzyme-like activity with the stability of inorganic materials. Biomimetic catalysis has demonstrated great potential in biomass conversion and has recently shown promising progress in plastic degradation. This perspective discusses biomimetic catalysis for plastic degradation from two perspectives: the imitation of the active centers and the imitation of the substrate-binding clefts. Given the chemical similarity between biomass and plastics, relevant work is also included in the discussion to draw inspiration. We conclude this perspective by highlighting the challenges and opportunities in achieving sustainable plastic recycling via a biomimetic approach.

Tailor-made molecular imprints for biological event intervention

Molecular imprints, which are crosslinked architectures containing specific molecular recognition cavities for targeting compounds, have recently transitioned from in vitro diagnosis to in vivo treatment. In current application scenarios, it has become an important topic to create new biomolecular recognition pathways through molecular imprinting, thereby inhibiting the pathogenesis and regulating the development of diseases. This review starts with a pathological analysis, mainly focusing on the corresponding artificial enzymes, enzyme inhibitors and antibody mimics with enhanced functions that are created by molecular imprinting strategies. Recent advances are highlighted in the use of molecular imprints as tailor-made nanomedicines for the prevention of three major diseases: metabolic syndrome, cancer, and bacterial/viral infections.

Synthetic Catalysts for Selective Glycan Cleavage from Glycoproteins and Cells

In situ modification of glycans requires extraordinary molecular recognition of highly complex and subtly different carbohydrates, followed by reactions at precise locations on the substrate. We here report synthetic catalysts that under physiological conditions cleave a predetermined oligosaccharide block such as a branched trimannose or the entire N-glycan of a glycoprotein, while nontargeted glycoproteins stay intact. The method also allows α2-6-sialylated galactosides to be removed preferentially over the α2-3-linked ones from cell surfaces, highlighting the potential of these synthetic glycosidases for glycan editing.

Exposure and risk assessment of phthalates in environmental water using a three-template molecularly imprinted fiber array strategy

Phthalate is a kind of environmental estrogen having a reproductive toxicity effect on animals and plants in the environment, and its detection is prone to matrix interference. Nevertheless, the molecularly imprinted polymer (MIP) can resist matrix interference. A three-template MIP solid-phase microextraction fiber array technique with improved adsorption flux and extraction capacity was innovatively developed. Additionally, the three-template MIP fiber arrays were used to screen phthalates in environmental water. The result showed that the three-template MIP fiber array had great potential for monitoring and controlling phthalate in environmental water. Moreover, the enrichment factors of the three-template MIP fiber arrays were 1410.65, 2419.55, and 493.21 times those of PA, PDMS, and PDMS/DVB commercial fiber-constructed arrays, respectively. The risk assessment using risk quotient revealed that BBP and DPHP had a medium-high ecological risk, DMP had a medium-low ecological risk, while EP and BP had a minimal ecological risk. This strategy represents an effective, easily tailored, and reusable method to simultaneously enhance extraction capacity and adsorption flux. It is environmentally friendly and has great feasibility for specific recognition of phthalate from environmental water and ecological risk assessment.

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

Carbonic anhydrase mimics with rationally designed active sites for fine-tuned catalytic activity and selectivity in ester hydrolysis

Numerous hydrolytic enzymes utilize zinc as a cofactor for catalysis. We here report water-soluble polymeric nanoparticles with zinc ions in active sites and a nearby base as a mimic of carbonic anhydrase (CA). Their pKa of 6.3-6.4 for zinc-bound water is lower than the 6.8-7.3 value for natural enzymes, which allows the catalyst to hydrolyze nonactivated alkyl esters under neutral conditions-a long sought-after goal for artificial esterases. The size and shape of the active site can be rationally tuned through a template used in molecular imprinting. Subtle structural changes in the template, including shifting an ethyl group by one C-N bond and removal of a methylene group, correlate directly with catalytic activity. A catalyst can be made to be highly specific or have broad substrate specificity through modular synthesis of templates.

Counterion-induced antibiotic-based small-molecular micelles for methicillin-resistant Staphylococcus aureus infections

A new counterion-induced small-molecule micelle (SM) with surface charge-switchable activities for methicillin-resistant Staphylococcus aureus (MRSA) infections is proposed. The amphiphilic molecule formed by zwitterionic compound and the antibiotic ciprofloxacin (CIP), via a "mild salifying reaction" of the amino and benzoic acid groups, can spontaneously assemble into counterion-induced SMs in water. Through vinyl groups designed on zwitterionic compound, the counterion-induced SMs could be readily cross-linked using mercapto-3, 6-dioxoheptane by click reaction, to create pH-sensitive cross-linked micelles (CSMs). Mercaptosuccinic acid was also decorated on the CSMs (DCSMs) by the same click reaction to afford charge-switchable activities, resulting in CSMs that were biocompatible with red blood cells and mammalian cells in normal tissues (pH 7.4), while having strong retention to negatively charged bacterial surfaces at infection sites, based on electrostatic interaction (pH 5.5). As a result, the DCSMs could penetrate deep into bacterial biofilms and then release drugs in response to the bacterial microenvironment, effectively killing the bacteria in the deeper biofilm. The new DCSMs have several advantages such as robust stability, a high drug loading content (∼ 30%), easy fabrication, and good structural control. Overall, the concept holds promise for the development of new products for clinical application. STATEMENT OF SIGNIFICANCE: We fabricated a new counterion-induced small-molecule micelle with surface charge-switchable activities (DCSMs) for methicillin-resistant Staphylococcus aureus (MRSA) infections. Compared with reported covalent systems, the DCSMs not only have improved stability, high drug loading content (∼ 30%), and good biosafety, but also have the environmental stimuli response, and antibacterial activity of the original drugs. As a result, the DCSMs exhibited enhanced antibacterial activities against MRSA both in vitro and in vivo. Overall, the concept holds promise for the development of new products for clinical application.

Artificial Esterase for Cooperative Catalysis of Ester Hydrolysis at pH 7

Ester is one of the most prevalent functional groups in natural and man-made products. Natural esterases hydrolyze nonactivated alkyl esters readily but artificial esterases generally use highly activated p-nitrophenyl esters as substrates. We report synthetic esterases constructed through molecular imprinting in cross-linked micelles. The water-soluble nanoparticle catalysts contain a thiouronium cation to mimic the oxyanion hole and a nearby base to assist the hydrolysis. Whereas this catalytic motif readily affords large rate acceleration for the hydrolysis of p-nitrophenyl hexanoate, nonactivated cyclopentyl hexanoate demands catalytic groups that can generate a strong nucleophile (hydroxide) in the active site. The hydroxide is stabilized by the protonated base when the external solution is at pH 7, enabling the hydrolysis of activated and nonactivated esters under neutral conditions.

Selective Hydrolysis of Nonactivated Aryl Esters at pH 7 through Cooperative Catalysis

Most reported artificial esterases only hydrolyze highly activated substrates. We here report synthetic catalysts that hydrolyze nonactivated aryl esters at pH 7, via cooperative action of a thiourea group that mimics the oxyanion hole of a serine protease and a nearby nucleophilic/basic pyridyl group. The molecularly imprinted active site distinguishes subtle structural changes in the substrate, including elongation of the acyl chain by two carbons or shift of a remote methyl group by one carbon.

Ring -opening of polythiolactones to construct protein-imprinted nanospheres with high recognition and regulation capabilities

Developing and preparing novel protein-imprinted nanomaterials with high recognition ability remains challenging because it is difficult to controllably and orderly design and arrange functional groups on the imprinted polymer layers of protein-imprinted nanomaterials to improve their protein identification. Herein, we present a new technology using rationally designed polythiolactone-decorated magnetic nanospheres as the precursor of multifunctionalized imprinted materials. Moreover, the strategy of ring-opening the polythiolactione layers using primary amines with terminal alcohols, acids and pyrrolidines introduces abundant recognition sites, which enhance the recognition for template proteins through multiple hydrogen-bonding and hydrophobic interactions. Thiols generated in situ by the ring-opening reaction provide sufficient crosslinking sites proximate to each recognition site for the formation of imprinting cavities, endowing the imprinted nanospheres with promising regulation capabilities. Based on the rational design, the imprinted nanospheres can be prepared conveniently and present tunable rebinding capacity and specificity for bovine serum albumin (BSA). The maximum saturated rebinding capacity of imprinted materials for BSA is up to 285 ± 15 mg g^-1 and the highest imprinting factor reaches 5.79. The simple and versatile strategy demonstrated in this study shows promise for the design of other protein-imprinted materials with high recognition ability.

Boosting Hydrolysis of Cellulose at High Temperature by β-Glucosidase Induced Metal-Organic Framework In-Situ Co-Precipitation Encapsulation

Due to the poor enzyme thermal stability, the efficient conversion of high crystallinity cellulose into glucose in aqueous phase over 50 °C is challenging. Herein, an enzyme-induced MOFs encapsulation of β-glucosidase (β-G) strategy was proposed for the first time. By using various methods, including SEM, XRD, XPS, NMR, FTIR and BET, the successful preparation of a porous channel-type flower-like enzyme complex (β-G@MOFs) was confirmed. The prepared enzyme complex (β-G@MOFs) materials showed improved thermal stability (from 50 °C to 100 °C in the aqueous phase) and excellent resistance to ionic liquids (the reaction temperature was as high as 110 °C) compared to the free enzyme (β-G). Not only the catalytic hydrolysis of cellulose by single enzyme (β-G) in ionic liquid was realized, but also the high-temperature continuous reaction performance of the enzyme was significantly improved. Benefiting from the significantly improved heat resistance, the β-G@MOFs exhibited 32.1 times and 34.2 times higher enzymatic hydrolysis rate compared to β-G for cellobiose and cellulose substrates, respectively. Besides, the catalytic activity of β-G@MOFs was retained up to 86 % after five cycles at 110 °C. This was remarkable because the fixation of the enzyme by the MOFs ensured that the folded structure of the enzyme would not expand at high temperatures, allowing the native conformation of the encapsulated protein well-maintained. Furthermore, we believe that this structural stability was caused by the confinement of flower-like porous MOFs.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

Synergistic Hydrolysis of Cellulose by a Blend of Cellulase-Mimicking Polymeric Nanoparticle Catalysts

Enzyme-like catalysts by design have been a long sought-after goal of chemists but difficult to realize due to the challenges in the construction of multifunctionalized active sites with accurately positioned catalytic groups for complex substrates. Hydrolysis of cellulose is a key step in biomass utilization and requires multiple enzymes to work in concert to overcome the difficulty associated with hydrolyzing the recalcitrant substrate. We here report methods to construct synthetic versions of these enzymes through covalent molecular imprinting and strategic postmodification of the imprinted sites. The synthetic catalysts cleave a cellulose chain endolytically at multiple positions or exolytically from the nonreducing end by one or three glucose units at a time, all using the dicarboxylic acid motif found in natural cellulases. By mimicking the endocellulase, exocellulase, and β-glucosidase, the synthetic catalysts hydrolyze cellulose in a synergistic manner, with an activity at 90 °C in pH 6.5 buffer more than doubled that of Aspergillus niger cellulase at pH 5 and 37 °C and 44% of that of a commercial cellulase blend (from Novozyme). As robust cross-linked polymeric nanoparticles, the synthetic catalysts showed little changes in activity after preheating at 90 °C for 3 days and could be reused, maintaining 76% of activity after 10 reaction cycles.

Molecularly imprinted materials for glycan recognition and processing

Carbohydrates are the most abundant organic molecules on Earth and glycosylation is the most common posttranslational modification of proteins. Glycans are involved in a plethora of biological processes including cell adhesion, bacterial and viral infection, inflammation, and cancer development. Coincidently, glycosides were some of the earliest molecules imprinted and have been instrumental in the development of covalent molecular imprinting technology. This perspective illustrates recently developed molecularly imprinted materials for glycan binding and processing. Novel imprinting techniques and postmodification led to development of synthetic glycan-binding materials capable of competing with natural lectins in affinity and artificial glycosidases for selective hydrolysis of complex glycans. These materials are expected to significantly advance glycochemistry, glycobiology, and related areas such as biomass conversion.

Generic imprinted fiber array strategy for high-throughput and ultrasensitive simultaneous determination of multiple neonicotinoids

Herein, a new generic fiber array based on molecular imprinting solid-phase microextraction (MIP-SPME) technology, was described to enrich trace multiple neonicotinoids with high flux from the food matrix. To begin with adsorption experiments coupled with theoretical calculations provided universal means for selecting the preferred template molecule clothianidin (CLT). Results demonstrated that the CLT-MIP fiber array exhibited significantly superior enrichment ability of 1189-2356-folds for six neonicotinoids compared with two kinds of commercial fiber arrays. Furthermore, the practicability of the CLT-MIP fiber array was verified by simultaneously determining multiple neonicotinoids in tea and honey samples. The CLT-MIP fiber array showed a limit of detection (LOD) of 0.03-0.58 μg/L for six neonicotinoids. The method also exhibited satisfactory recoveries ranging from 85.4% to 116.8% with RSD (n = 3) less than 8.8%. The imprinted fiber array has the advantages of high-throughput, predominant reproducibility, and accurate quantitation multi-component, and it may open up a new mean to efficiently enrich high-throughput and simultaneously detect multiple compounds from food samples.

Oxidative Cleavage of Glycosidic Bonds by Synthetic Mimics of Lytic Polysaccharide Monooxygenases

Lytic polysaccharide monooxygenases (LPMOs) cleave polysaccharides through copper-bound oxyl radicals. We report a synthetic mimic of LPMO that uses micelle-stabilized hydrogen bonds to bind a glycan and two molecularly imprinted hydrophobic pockets to accommodate the alkyl tail of the glycoside and a copper cofactor, respectively. Cleavage of alkyl glycosides and oligosaccharides with hydrogen peroxide occurs at room temperature in aqueous solution, with selectivities for both the glycan and the alkyl aglycon.

Aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) synthesized by a one-pot method for sensitively detecting 4-nitrophenol

An aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) (AIE-FMIPIL) was synthesized for the first time with an AIE probe 4-(1,2,2-triphenylvinyl)phenyl acrylate (TPE), and an ionic liquid as dual functional monomers, and an ionic liquid as cross-linker. AIE-FMIPIL displayed a sphere-like shape and its average diameter was 410 nm. The absolute quantum yields of TPE and AIE-FMIPIL were 9.23% and 12.61%, respectively. The synergetic effect of TPE in the AIE-FMIPIL framework contributed to the higher quantum yield of AIE-FMIPIL. 4-Nitrophenol (4-NP) efficiently quenched AIE-FMIPIL with high fluorescence based on the Förster resonance energy transfer mechanism. The synthesized AIE-FMIPIL sensor was highly sensitive for 4-NP detection (linear range, 0.02-1.5 μM) in the optimal detection condition, with a low detection limit of 10 nM (S/N = 3). AIE-FMIPIL showed increased sensitivity and quenching efficiency compared with AIE-FMIP comprising a traditional monomer and cross-linker. AIE-FMIPIL exhibited selective binding to 4-NP because of the imprinted sites. AIE-FMIPIL was adopted to detect 4-NP in environmental samples.

Recent development in the design of artificial enzymes through molecular imprinting technology

Enzymes, a class of proteins or RNA with high catalytic efficiency and specificity, have inspired generations of scientists to develop enzyme mimics with similar capabilities. Many enzyme mimics have been...

Multi-stimuli responsive molecularly imprinted nanoparticles with tailorable affinity for modulated specific recognition of human serum protein

A kind of novel multi-stimuli responsive molecularly imprinted polymers with bovine serum protein (BSA) as dummy template (MSR-BSA-MIPs) was fabricated for specific recognition of human serum protein (HSA) with modulated...

Sugar-Derived Amidines and Congeners: Structures, Glycosidase Inhibition and Applications

Glycosidases, the enzymes responsible for the breakdown of glycoconjugates including di-, oligo- and polysaccharides are ubiquitous through all kingdoms of life. The extreme chemical stability of the glycosidic bond combined with the catalytic rates achieved by glycosidases makes them among the most proficient of all enzymes. 
 Given their multitude of roles in vivo, inhibition of these enzymes is highly attractive with potential in the treatment of a vast array of pathologies ranging from lysosomal storage and diabetes to viral infections. Therefore great efforts have been invested in the last three decades to design and synthesize inhibitors of glycosidases leading to a number of drugs currently on the market. Amongst the vast array of structures that have been disclosed, sugars incorporating an amidine moiety have been the focus of many research groups around the world because of their glycosidase transition state-like structure. In this review we report and discuss the structure, the inhibition profile and the use of these molecules including related structural congeners as transition state analogs.

Pyrrolidinyl ligand motif-assisted bovine serum albumin molecularly imprinted polymers with high specificity

Ideal binding ligands for anchoring proteins are essential for the design and assembly of desirable molecularly imprinted polymers (MIPs). In this study, bovine serum albumin-MIPs (BSA-MIPs) were successfully prepared by orchestrating the involvement of orientation-controllable binding ligands via sequential thiol-ene click and thiol-ene-amine conjugation. We showed that the optimal thiol-ene-amine conjugates and binding ligands were decisive in determining the rebinding capacity and selectivity. The pyrrolidinyl MIPs exhibited the best adsorption capacity of 352 ± 22 mg/g and a superior imprinting factor of 4.72 among MIPs with various binding ligands. These favourable results were further studied by computational simulation and isothermal titration calorimetry (ITC). Molecular docking revealed the preferential binding free energy and H-bonds between BSA residues and the thiol-ene-amine conjugates. Meanwhile, the pyrrolidinyl ligand motif enabled entropy-favourable affinity to be achieved via hydrophobic effects with the BSA template by ITC thermodynamics. Because of these favourable bindings, the MIPs exhibited excellent adsorption specificity to BSA over competing proteins. The proof-of-concept of MIPs with orientation-controllable conjugates and proven binding ligands for target proteins demonstrates that this material is promising for use with a real biological sample.

Epitope-imprinted polymers: Design principles of synthetic binding partners for natural biomacromolecules

Molecular imprinting (MI) has been explored as an increasingly viable tool for molecular recognition in various fields. However, imprinting of biologically relevant molecules like proteins is severely hampered by several problems. Inspired by natural antibodies, the use of epitopes as imprinting templates has been explored to circumvent those limitations, offering lower costs and greater versatility. Here, we review the latest innovations in this technology, as well as different applications where MI polymers (MIPs) have been used to target biomolecules of interest. We discuss the several steps in MI, from the choice of epitope and functional monomers to the different production methods and possible applications. We also critically explore how MIP performance can be assessed by various parameters. Last, we present perspectives on future breakthroughs and advances, offering insights into how MI techniques can be expanded to new fields such as tissue engineering.

Substrate Protection in Controlled Enzymatic Transformation of Peptides and Proteins

Proteins are involved in practically every single biological process. The many enzymes involved in their synthesis, cleavage, and posttranslational modification (PTM) carry out highly specific tasks with no usage of protecting groups. Yet, the chemists' strategy of protection/deprotection potentially can be highly useful, for example, when a specific biochemical reaction catalyzed by a broad-specificity enzyme needs to be inhibited, during infection of cells by enveloped viruses, in the invasion and spread of cancer cells, and upon mechanistic investigation of signal-transduction pathways. Doing so requires highly specific binding of peptide substrates in aqueous solution with biologically competitive affinities. Recent development of peptide-imprinted cross-linked micelles allows such protection and affords previously impossible ways of manipulating peptides and proteins in enzymatic transformations.

Tandem Aldol Reaction from Acetal Mixtures by an Artificial Enzyme with Site-Isolated Acid and Base Functionalities

Site-isolation of catalysts can enable incompatible catalysts such as acid and base to be used in one pot for enhanced efficiency and other benefits. Although many synthetic platforms have been reported for this purpose, they generally do not possess the exquisite selectivity of site-isolated enzymes in nature. Here we report water-soluble protein-sized nanoparticles with site-isolated acids in the core and amines on the surface. The catalysts were made through molecular imprinting of cross-linked micelles, followed by facile one-step photoaffinity labeling of the imprinted binding site. With a tunable, substrate-specific active site, the bifunctional artificial enzyme catalyzed highly selective tandem cross aldol reaction between acetone and mixtures of isomeric aryl acetals. It could also transform a less reactive substrate over a more reactive one.