SmI2-Catalyzed Intermolecular Coupling of Cyclopropyl Ketones and Alkynes: A Link between Ketone Conformation and Reactivity

Diastereoselective Dearomatizing Cyclizations of 5-Arylpentan-2-ones by Samarium Diiodide - A Computational Analysis

This study analyzes the samarium diiodide-promoted cyclizations of 5-arylpentan-2-ones to dearomatized bicyclic products utilizing density functional theory. The reaction involves a single electron transfer to the carbonyl group, which occurs synchronously with the rate determining cyclization event, and a second subsequent proton-coupled electron transfer. These redox reactions are accurately computed employing small core pseudo potentials explicitly involving all f-electrons of samarium. Comparison of the energies of the possible final products rules out thermodynamic control of the observed regio- and diastereoselectivities. Kinetic control via appropriate transition states is correctly predicted, but to obtain reasonable energy levels the influence of the co-solvent hexamethylphosphortriamide has to be estimated by using a correction term. The steric effect of the bulky samarium ligands is decisive for the observed stereoselectivity. Carbonyl groups in para-position of the aryl group change the regioselectivity of the cyclization and lead to spiro compounds. The computations suggest again kinetic control of this deviating outcome. However, the standard mechanism has to be modified and the involvement of a complex activated by two SmI2 moieties is proposed in which two electrons are transferred simultaneously to form the new C-C bond. Computation of model intermediates show the feasibility of this alternative+ mechanism.

Catalytic Intramolecular Ketone Haloacylation Enabled Stereoselective Heterolytic Cleavage of Cyclopropyl Ketones with Enhanced Reactivity and Regioselectivity beyond Electronics

By integration of oxocarbenium activation and Lewis acid coordination activation via conformational proximity-driven, Pd(II)- or Cu(I)-catalyzed intramolecular ketone haloacylation, regio- and stereoselective heterolytic ring-opening 1,5-haloacylation of cyclopropyl ketones, including those with weak single alkyl donors, has been developed for the synthesis of valuable α-quaternary halo-γ-butenolides. The vicinal carboxylic acid and ketone acceptors are no longer just spectator activators. Further, this reaction delivers a constant regioselectivity regardless of the electronic nature of substituents, even the malonate.

Photoinduced [3 + 2] Cycloadditions of Aryl Cyclopropyl Ketones with Alkynes and Alkenes

The five-membered ring skeleton is one of the most pivotal in the area of pharmaceutical and natural products. [3 + 2] cycloadditions of cyclopropyl and unsaturated compounds are a highly efficient and atom-economical way to build a five-member compound. The previous works about the kind of [3 + 2] cycloadditions usually utilized metal or organic small molecule catalysts. However, an ideal [3 + 2] cycloaddition reaction that smoothly happens without any additives and catalysts under mild conditions is underdeveloped. Hence, we report [3 + 2] cycloadditions of aryl cyclopropyl without any additives and catalysts under purple LED. In this method, a broad scope of cyclopropyl, alkyne, and alkene was very compatible, especially drug derivatives ibuprofen and Ioxoprofen, to obtain the corresponding cycloaddition product with a good yield up to 93%.

Alkyl Cyclopropyl Ketones in Catalytic Formal [3 + 2] Cycloadditions: The Role of SmI2 Catalyst Stabilization

Alkyl cyclopropyl ketones are introduced as versatile substrates for catalytic formal [3 + 2] cycloadditions with alkenes and alkynes and previously unexplored enyne partners, efficiently delivering complex, sp3-rich products. The key to effectively engaging this relatively unreactive new substrate class is the use of SmI2 as a catalyst in combination with substoichiometric amounts of Sm0; the latter likely acting to prevent catalyst deactivation by returning SmIII to the catalytic cycle. In the absence of Sm0, background degradation of the SmI2 catalyst can outrun product formation. For the most recalcitrant alkyl cyclopropyl ketones, catalysis is "switched-on" using these new robust conditions, and otherwise unattainable products are delivered. Combined experimental and computational studies have been used to identify and probe reactivity trends among alkyl cyclopropyl ketones, including more complex bicyclic alkyl cyclopropyl ketones, which react quickly with various partners to give complex products. In addition to establishing alkyl cyclopropyl ketones as a new substrate class in a burgeoning field of catalysis, our study provides vital mechanistic insight and robust, practical approaches for the nascent field of catalysis with SmI2.

Intermolecular Carbophosphination of Alkynes with Phosphole Oxides via Ni-Al Bimetal-Catalyzed C-P Bond Activation

Intermolecular carbophosphination reaction of alkynes or alkenes with unreactive C-P bonds remains an elusive challenge. Herein, we used a Ni-Al bimetallic catalyst to realize an intermolecular carbophosphination reaction of alkynes with 5-membered phosphole oxides, providing a series of 7-membered phosphepines in up to 94 % yield.

Photocatalyzed [2σ + 2σ] and [2σ + 2π] Cycloadditions for the Synthesis of Bicyclo[3.1.1]heptanes and 5- or 6-Membered Carbocycles

We report the use of photocatalysis for the homolytic ring-opening of carbonyl cyclopropanes. In contrast to previous studies, our approach does not require a metal cocatalyst or a strong reductant. The carbonyl cyclopropanes can be employed for both [2σ + 2σ] and [2σ + 2π] annulation with either alkenes/alkynes or bicyclo[1.1.0]butanes, yielding cyclopent-anes/-enes and bicyclo[3.1.1]heptanes (BCHs), respectively. BCHs are promising bioisosteres for 1,2,4,5 tetra-substituted aromatic rings. Mechanistic studies, including density functional theory computation and a trapping experiment with DMPO, support a 1,3-biradical generated from cyclopropane as a key intermediate for these transformations.

Recent Advances in the Catalytic Synthesis of the Cyclopentene Core

Five-membered carbocycles are ubiquitously found in natural products, pharmaceuticals, and other classes of organic compounds. Within this category, cyclopentenes deserve special attention due to their prevalence as targets and as well as key intermediates for synthesizing more complex molecules. Herein, we offer an overview summarizing some significant recent advances in the catalytic assembly of this structural motif. A great variety of synthetic methodologies and strategies are covered, including transition metal-catalyzed or organocatalyzed processes. Both inter- and intramolecular transformations are documented. On this ground, our expertise in the application of C-H functionalization reactions oriented towards the formation of this ring and its subsequent selective functionalization is embedded.

Enantioselective radical cascade cyclization via Ti-catalyzed redox relay

Radical cascade cyclization reactions provide an efficient method for the construction of polycyclic architectures with multiple stereogenic centers. However, achieving enantioselectivity control of this type of reaction is a challenging task. Here, we report an enantioselective cyclization of polyfunctional aryl cyclopropyl ketone and alkyne units, wherein the stereochemical outcome is directed by a chiral Ti(salen) catalyst. This transformation was proposed to proceed via a radical cascade process involving the reductive ring-opening of the cyclopropyl ketone followed by two annulation events entailing cyclization of the ensuing alkyl radical onto the alkyne and subsequent addition of the incipient vinyl radical to the Ti(IV)-enolate.

Cp2Ti(II) Mediated Rearrangement of Cyclopropyl Imines

Ti-catalyzed oxidative alkyne carboamination with alkenes and azo compounds can yield either α,β-unsaturated imines or cyclopropyl imines through a common azatitanacyclohexene intermediate. Herein, we report the synthesis of a model azatitanacyclohexene complex (3) through the ring-opening of a cyclopropyl imine with Cp2Ti(BTMSA) (BTMSA = bis(trimethylsilyl)acetylene). 3 readily undergoes thermal or reductant-catalyzed ring contraction to an azatitanacyclopentene (4), analogous to the proposed mechanism for forming α,β-unsaturated imines in the catalytic reaction. A cyclopropyl imine or an α,β-unsaturated imine could be liberated via the oxidation of 3 or 4 with azobenzene, respectively, further implicating the role of these metallacycles in the Ti-catalyzed carboamination reaction.

1,3-Difunctionalization of Propargyl Silanes with Concomitant 1,2-Silyl Shift: Synthesis of Allyl Functionalized Vinyl Silanes

Terminal alkynes with a silyl group at the propargylic position upon activation with electrophiles such as N-bromosuccinimide undergo (E)-selective 1,2-silyl group migration. Subsequently, an allyl cation is formed that is intercepted by an external nucleophile. This approach provides allyl ethers and esters with stereochemically defined vinyl halide and silane handles for further functionalization. The scope of propargyl silanes and electrophile-nucleophile pairs are investigated, and various trisubstituted olefins are prepared in up to 78% yield. The obtained products have been demonstrated to serve as building blocks for transition-metal-catalyzed cross-couplings of vinyl halides, silicon-halogen exchange, and allyl acetate functionalization reactions.

Palladium-catalysed enantio- and regioselective (3 + 2) cycloaddition reactions of sulfamidate imine-derived 1-azadienes towards spirocyclic cyclopentanes

An enantio- and diastereoselective Pd-catalysed (3 + 2) cycloaddition of bis(trifluoroethyl) 2-vinyl-cyclopropane-1,1-dicarboxylate (VCP) with cyclic sulfamidate imine-derived 1-azadienes (SDAs) has been developed. These reactions provide highly functionalized spiroheterocycles having three contiguous stereocentres, including a tetrasubstituted carbon bearing an oxygen functionality. The two geminal trifluoroethyl ester moieties can be manipulated in a facially selective manner to afford more diversely decorated spirocycles with four contiguous stereocentres. In addition, diastereoselective reduction of the imine moiety can also afford a fourth stereocentre and exposes the important 1,2-amino alcohol functionality.

Iron-Catalyzed Reductive Ring Opening/gem-Difluoroallylation of Cyclopropyl Ketones

By merging C-C and C-F bond cleavage, we developed a regioselective ring opening/gem-difluoroallylation of cyclopropyl ketones with α-trifluoromethylstyrenes, which proceeds under the catalysis of iron with the combination of manganese and TMSCl as the reducing agents, providing a new entry to the synthesis of carbonyl-containing gem-difluoroalkenes. Remarkably, the ketyl radical-induced selective C-C bond cleavage and the following generation of more-stable carbon-centered radicals enable complete regiocontrol of this ring opening reaction for various substitution patterns of the cyclopropane ring.

A catalytic alkene insertion approach to bicyclo[2.1.1]hexane bioisosteres

C(sp³)-rich bicyclic hydrocarbon scaffolds, as exemplified by bicyclo[1.1.1]pentanes, play an increasingly high-profile role as saturated bioisosteres of benzenoids in medicinal chemistry and crop science. Substituted bicyclo[2.1.1]hexanes (BCHs) are emerging bicyclic hydrocarbon bioisosteres for ortho- and meta-substituted benzenes, but are difficult to access. Therefore, a general synthetic route to BCHs is needed if their potential as bioisosteres is to be realized. Here we describe a broadly applicable catalytic approach that delivers substituted BCHs by intermolecular coupling between olefins and bicyclo[1.1.0]butyl (BCB) ketones. The SmI₂-catalysed process works for a wide range of electron-deficient alkenes and substituted BCB ketones, operates with SmI₂ loadings as low as 5 mol% and is underpinned by a radical relay mechanism that is supported by density functional theory calculations. The product BCH ketones have been shown to be versatile synthetic intermediates through selective downstream manipulation and the expedient synthesis of a saturated hydrocarbon analogue of the broad-spectrum antimicrobial, phthalylsulfathiazole.

Formal Cycloadditions Driven by the Homolytic Opening of Strained, Saturated Ring Systems

The field of strain-driven, radical formal cycloadditions is experiencing a surge in activity motivated by a renaissance in free radical chemistry and growing demand for sp³ -rich ring systems. The former has been driven in large part by the rise of photoredox catalysis, and the latter by adoption of the "Escape from Flatland" concept in medicinal chemistry. In the years since these broader trends emerged, dozens of formal cycloadditions, including catalytic, asymmetric variants, have been developed that operate via radical mechanisms. While cyclopropanes have been studied most extensively, a variety of strained ring systems are amenable to the design of analogous reactions. Many of these processes generate lucrative, functionally decorated sp³ -rich ring systems that are difficult to access by other means. Herein, we summarize recent efforts in this area and analyze the state of the field.

Back to the future of organolanthanide chemistry

At the dawn of the development of structural organometallic chemistry, soon after the discovery of ferrocene, the description of the LnCp₃ complexes, featuring large and mostly trivalent lanthanide ions, was rather original and sparked curiosity. Yet, the interest in these new architectures rapidly dwindled due to the electrostatic nature of the bonding between π-aromatic ligands and 4f-elements. Almost 70 years later, it is interesting to focus on how the discipline has evolved in various directions with the reports of multiple catalytic reactivities, remarkable potential in small molecule activation, and the development of rich redox chemistry. Aside from chemical reactivity, a better understanding of their singular electronic nature - not precisely as simplistic as anticipated - has been crucial for developing tailored compounds with adapted magnetic anisotropy or high fluorescence properties that have witnessed significant popularity in recent years. Future developments shall greatly benefit from the detailed reactivity, structural and physical chemistry studies, particularly in photochemistry, electro- or photoelectrocatalysis of inert small molecules, and manipulating the spins' coherence in quantum technology.

Diboron(4)-Catalyzed Remote [3+2] Cycloaddition of Cyclopropanes via Dearomative/Rearomative Radical Transmission through Pyridine

Ring structures such as pyridine, cyclopentane or their combinations are important motifs in bioactive molecules. In contrast to previous cycloaddition reactions that necessitated a directly bonded initiating functional group, this work demonstrated a novel through-(hetero)arene radical transmission concept for selective activation of a remote bond. An efficient, metal-free and atom-economical [3+2] cycloaddition between 4-pyridinyl cyclopropanes and alkenes or alkynes has been developed for modular synthesis of pyridine-substituted cyclopentanes, cyclopentenes and bicyclo[2.1.1]hexanes that are difficult to access using known methods. This complexity-building reaction was catalyzed by a very simple and inexpensive diboron(4) compound and took place via dearomative/rearomative processes. The substrate scope was broad and more than 100 new compounds were prepared in generally high yields. Mechanistic experiments and density function theory (DFT) investigation supported a radical relay catalytic cycle involving alkylidene dihydropyridine radical intermediates and boronyl radical transfer.

Samarium Diiodide Acting on Acetone-Modeling Single Electron Transfer Energetics in Solution

Samarium diiodide is a versatile single electron transfer (SET) agent with various applications in organic chemistry. Lewis structures regularly insinuate the existence of a ketyl radical when samarium diiodide binds a carbonyl group. The study presented here investigates this electron transfer by the means of computational chemistry. All electron CASPT2 calculations with the inclusion of scalar relativistic effects predict an endotherm electron transfer from samarium diiodide to acetone. Energies calculated with the PBE0-D3(BJ) functional and a small core pseudopotential are in good agreement with CASPT2. The calculations confirm the experimentally measured increase of the samarium diiodide reduction potential through the addition of hexamethylphosphoramide also known as HMPA.

Reversible Homolysis of a Carbon-Carbon σ-Bond Enabled by Complexation-Induced Bond-Weakening

A case study of catalytic carbon-carbon σ-bond homolysis is presented. The coordination of a redox-active Lewis acid catalyst reduces the bond-dissociation free energies of adjacent carbon-carbon σ-bonds, and this complexation-induced bond-weakening is used to effect reversible carbon-carbon bond homolysis. Stereochemical isomerization of 1,2-disubstituted cyclopropanes was investigated as a model reaction with a ruthenium (III/II) redox couple adopted for bond weakening. Results from our mechanistic investigation into the stereospecificity of the isomerization reaction are consistent with selective complexation-induced carbon-carbon bond homolysis. The ΔG‡ of catalyzed and uncatalyzed reactions were estimated to be 14.4 and 40.0 kcal/mol, respectively with the computational method, (U)PBE0-D3/def2-TZVPP-SMD(toluene)//(U)B3LYP-D3/def2-SVP. We report this work as the first catalytic example where the complexation-induced bond-weakening effect is quantified through transition state analysis.

Solid-state and solution-phase characterization of SmII-aza[2.2.2]cryptate and its methylated analogue

Two new Sm^II-azacryptates are reported that differ in steric hindrance and Lewis basicity of donor atoms. The sterically hindered complex has a smaller coordination number and a more negative electrochemical potential than the complex with less steric hindrance.

Diastereoselective Radical 1,4-Ester Migration: Radical Cyclizations of Acyclic Esters with SmI2

Reductive cyclizations of carbonyl compounds, mediated by samarium(II) diiodide (SmI₂, Kagan’s reagent), represent an invaluable platform to generate molecular complexity in a stereocontrolled manner. In addition to classical ketone and aldehyde substrates, recent advances in radical chemistry allow the cyclization of lactone and lactam-type substrates using SmI₂. In contrast, acyclic esters are considered to be unreactive to SmI₂ and their participation in reductive cyclizations is unprecedented. Here, we report a diastereoselective radical 1,4-ester migration process, mediated by SmI₂, that delivers stereodefined alkene hydrocarboxylation products via radical cyclization of acyclic ester groups in α-carbomethoxy δ-lactones. Isotopic labeling experiments and computational studies have been used to probe the mechanism of the migration. We propose that a switch in conformation redirects single electron transfer from SmI₂ to the acyclic ester group, rather than the “more reactive” lactone carbonyl. Our study paves the way for the use of elusive ketyl radicals, derived from acyclic esters, in SmI₂-mediated reductive cyclizations.

Catalytic defluorinative ketyl-olefin coupling by halogen-atom transfer

Ketyl–olefin coupling reactions stand as one of the fundamental chemical transformations in synthetic chemistry and have been widely employed in the generation of complex molecular architectures and natural product synthesis. However, catalytic ketyl–olefin coupling, until the recent development of photoredox chemistry and electrosynthesis through single-electron transfer mechanisms, has remained largely undeveloped. Herein, we describe a new approach to achieve catalytic ketyl–olefin coupling reactions by a halogen-atom transfer mechanism, which provides innovative and efficient access to various gem-difluorohomoallylic alcohols under mild conditions with broad substrate scope. Preliminary mechanistic experimental and computational studies demonstrate that this radical-to-polar crossover transformation could be achieved by sequentially orchestrated Lewis acid activation, halogen-atom transfer, radical addition, single-electron reduction and β-fluoro elimination.

A catalytic ketyl–olefin coupling reaction including sequentially orchestrated Lewis acid activation, halogen-atom transfer, radical addition, single-electron reduction and β-fluoro elimination has been developed.

CdS Quantum Dots as Potent Photoreductants for Organic Chemistry Enabled by Auger Processes

Strong reducing agents (<-2.0 V vs saturated calomel electrode (SCE)) enable a wide array of useful organic chemistry, but suffer from a variety of limitations. Stoichiometric metallic reductants such as alkali metals and SmI₂ are commonly employed for these reactions; however, considerations including expense, ease of use, safety, and waste generation limit the practicality of these methods. Recent approaches utilizing energy from multiple photons or electron-primed photoredox catalysis have accessed reduction potentials equivalent to Li⁰ and shown how this enables selective transformations of aryl chlorides via aryl radicals. However, in some cases, low stability of catalytic intermediates can limit turnover numbers. Herein, we report the ability of CdS nanocrystal quantum dots (QDs) to function as strong photoreductants and present evidence that a highly reducing electron is generated from two consecutive photoexcitations of CdS QDs with intermediate reductive quenching. Mechanistic experiments suggest that Auger recombination, a photophysical phenomenon known to occur in photoexcited anionic QDs, generates transient thermally excited electrons to enable the observed reductions. Using blue light-emitting diodes (LEDs) and sacrificial amine reductants, aryl chlorides and phosphate esters with reduction potentials up to -3.4 V vs SCE are photoreductively cleaved to afford hydrodefunctionalized or functionalized products. In contrast to small-molecule catalysts, QDs are stable under these conditions and turnover numbers up to 47 500 have been achieved. These conditions can also effect other challenging reductions, such as tosylate protecting group removal from amines, debenzylation of benzyl-protected alcohols, and reductive ring opening of cyclopropane carboxylic acid derivatives.

Palladium-catalyzed stereoselective ring-opening reaction of aryl cyclopropyl ketones

Herein, we report that α,β-unsaturated ketones could be obtained by palladium-catalyzed ring-opening of mono-substituted cyclopropyl ketones efficiently and systematically. (E)-1-Arylbut-2-en-1-ones were generated from aryl cyclopropyl ketones stereoselectively in yields of 23-89% by the Pd(OAc)₂/PCy₃ catalytic system. The reaction exhibited stereoselectivity (only E products were found) and was suitable for both phenyl and heteroaryl cyclopropyl ketones.

Nickel-Catalyzed Reductive Coupling of γ-Metalated Ketones with Unactivated Alkyl Bromides

A nickel-catalyzed reductive cross-coupling reaction of aryl cyclopropyl ketones with easily accessible unactivated alkyl bromides to access aryl alkyl ketones has been developed. This strategy facilitates access to various of γ-alkyl-substituted ketones via ring opening of cyclopropyl ketones (26 examples, 50-90% yield). Initial mechanistic studies revealed that the reaction proceeds via radical cleavage of the alkyl bromide.

Catalysis with Diboron(4)/Pyridine: Application to the Broad-Scope [3 + 2] Cycloaddition of Cyclopropanes and Alkenes

In contrast to the extensive but non-recyclable use of tetraalkoxydiboron(4) compounds as stoichiometric reagents in diverse reactions, this article reports an atom-economical reaction using a commercial diboron(4) as the catalyst. The key to success was designing a catalytic cycle for radical [3 + 2] cycloaddition involving a pyridine cocatalyst to generate from the diboron(4) catalyst and reversibly mediate the transfer of boronyl radicals. In comparison with known [3 + 2] cycloaddition with transition metal-based catalysts, the current reaction features not only metal-free conditions, inexpensive and stable catalysts, and simple operation but also remarkably broadened substrate scope. In particular, previously unusable cyclopropyl ketones without an activating group and/or alkenes with 1,2-disubstitution and 1,1,2-trisubstitution patterns were successfully used for the first time. Consequently, challenging cyclopentane compounds with various levels of substitution (65 examples, 57 new products, up to six substituents at all five ring atoms) were readily prepared in generally high to excellent yield and diastereoselectivity. The reaction was also successfully applied in concise formal synthesis of an anti-obesity drug and building natural product-like complex bridged or spirocyclic compounds. Mechanistic experiments and computational investigation support the proposed radical relay catalysis featuring a pyridine-assisted boronyl radical catalyst. Overall, this work demonstrates the first approach to use tetraalkoxydiboron(4) compounds as catalysts and may lead to the development of new, green, and efficient transition metal-like boron-catalyzed organic reactions.

Insights into the Mechanism of Metal-Catalyzed Transformation of Oxime Esters: Metal-Bound Radical Pathway vs Free Radical Pathway

Controlling of radical reactivity by binding a radical to the metal center is an elegant strategy to overcome the challenge that radical intermediates are "too reactive to be selective". Yet, its application has seemingly been limited to a few strained-ring substrates, azide compounds, and diazo compounds. Meanwhile, first-row transition-metal-catalyzed (mainly, Fe, Ni, Cu) transformations of oxime esters have been reported recently in which the activation processes are assumed to follow free-radical mechanisms. In this work, we show by means of density functional theory calculations that the activation of oxime esters catalyzed by Fe(II) and Cu(I) catalysts more likely affords a metal-bound iminyl radical, rather than the presumed free iminyl radical, and the whole process follows a metal-bound radical mechanism. The as-formed metal-bound radical intermediates are an Fe(III)-iminyl radical (S_total = 2, S_Fe = 5/2, and S_iminyl = -1/2) and a Cu(II)-iminyl radical (S_total = 0, S_Cu = 1/2, and S_iminyl = -1/2). The discovery of such novel substrates affording metal-bound radical intermediates may facilitate the experimental design of metal-catalyzed asymmetric synthesis using oxime esters to achieve the desired enantioselectivity.

Samarium(ii) iodide-mediated reactions applied to natural product total synthesis

Natural product synthesis remains a field in which new synthetic methods and reagents are continually being evaluated. Due to the demanding structures and complex functionality of many natural products, only powerful and selective methods and reagents will be highlighted in this proceeding. Since its introduction by Henri Kagan, samarium(ii) iodide (SmI₂, Kagan's reagent) has found increasing use in chemical synthesis. Over the years, many reviews have been published on the application of SmI₂ in numerous reductive coupling procedures as well as in natural product total synthesis. This review highlights recent advances in SmI₂-mediated synthetic strategies, as applied in the total synthesis of natural products since 2004.

Natural product synthesis remains a field in which new synthetic methods and reagents are continually being evaluated.

Deoxygenative Cross-Coupling of Aromatic Amides with Polyfluoroarenes

Considering the ubiquitous nature and ready synthesis of amides, and the great significance of organofluorine-containing species, the cross-coupling of amides and polyfluoroarenes, leading to new carbon-carbon bond-forming methodologies, would find useful applications in synthesis, late-stage functionalization, and rapid generation of molecular diversity. Herein, we present a novel synthesis of α-polyfluoroaryl amines via Sm/SmI₂ -mediated deoxygenative cross-coupling of aromatic amides with polyfluoroarenes through direct C-H functionalization. The structural and functional diversity of these readily available precursors provides a versatile and flexible strategy for the streamlined synthesis of α-polyfluoroaryl amines. Combining experimental and theoretical studies, a novel plausible mechanism of the α-aminocarbene-mediated C-H insertion has been revealed, which may stimulate future work for the development of novel methods in amine synthesis.

Photocatalytic Sulfonylcarbocyclization of Alkynes Using SEt as a Traceless Directing Group: Access to Cyclopentenes and Indenes

Cyclopentenes and indenes are important structural scaffolds in synthetic, medical, and material chemistry. Cyclization of alkynes via remote C-H functionalization is an appealing approach to construct these motifs due to its high efficiency and step-economy. Herein, a traceless directing group strategy was designed to reverse the regioselectivity of radical addition which enabled an unprecedented photocatalytic sulfonylcarbocyclization of terminal alkynes by forming C-C bond on inert C(sp³ )-H bond. It offers a facile access to decorated cyclopentenes and indenes under mild conditions. The resultant products could be converted into a set of valuable molecular scaffolds, including a key intermediate of AM-6226. Mechanistic experiments suggest a radical cascade pathway comprising a Markovnikov-type sulfonylation, 1,5-hydrogen atom transfer, 5-endo-trig cyclization, and β-elimination. This study lays further groundwork for the use of anti-Baldwin 5-endo-trig radical cyclization in rapidly assembling five-membered carbocycles.

Samarium(II)-Electrocatalyzed Chemoselective Reductive Alkoxylation of Phthalimides

The unprecedented samarium-eletrocatalyzed reductive alkoxylation of phthalimides in a single step is presented. Under mild conditions, using electrogenerated Sm(II) with TMSCl (trimethyl chlorosilane), N-substituted 3-alkoxyl isoindolin-1-ones are isolated in good...

Extended Corey–Chaykovsky reactions: transformation of 2-hydroxychalcones to benzannulated 2,8-dioxabicyclo[3.2.1]octanes and 2,3-dihydrobenzofurans

We report the divergent synthesis of benzannulated 2,8-dioxabicyclo[3.2.1]octanes and 2,3-dihydrobenzofurans using the concept of extended Corey–Chaykovsky reactions.

Expanding Stereoelectronic Limits of endo-tet Cyclizations: Synthesis of Benz[b]azepines from Donor-Acceptor Cyclopropanes

The importance of intramolecular constraints in cyclic transition-state geometries is especially pronounced in n-endo-tet cyclizations, where the usual backside approach of a nucleophile to the breaking bond is impossible for the rings containing less than eight atoms. Herein, we expand the limits of endo-tet cyclizations and show that donor-acceptor cyclopropanes can provide a seven-membered ring via a genuine 6-endo-tet process. Substrates containing a N-alkyl-N-arylcarbamoyl moiety as an acceptor group undergo Lewis acid-induced cyclization to form tetrahydrobenz[b]azepin-2-ones in high yields. The reaction proceeds with the inversion of the configuration at the electrophilic carbon. In this process, a formally six-membered transition state yields a seven-membered ring as the pre-existing cycle is merged into the forming ring. The stereochemistry of the products can be controlled by the reaction time and by the nature of Lewis acid, opening access to both diastereomers by tuning of the reaction conditions.

Titanocene-Catalyzed [2+2] Cycloaddition of Bisenones and Comparison with Photoredox Catalysis and Established Methods

Cp2 Ti(TFA) is a broadly applicable catalyst for the [2+2] cycloaddition of bisenones by inner-sphere electron transfer. The attractiveness of this mechanism is shown by comparison with outer-sphere ET methods. DFT calculations show that the reaction proceeds through a unique unfavorable 5-exo (the rate-determining step) and a favorable 4-exo cyclization.