Layer or Tube? Uncovering Key Factors Determining the Rolling-up of Layered Coordination Polymers

Nanoarchitectonics of a Smectite with 4,4'-Diammonium-α-truxillic Acid and Its Methyl Ester for the Removal of o-Phenylphenol and Biphenyl from Water

Adsorbents with hydrophilic and hydrophobic natures were designed by intercalating a bioderived molecule; 4,4'-diammonium-α-truxillic acid (4ATA) and 4,4'-diammonium-α-truxillic acid dimethyl ester (E4ATA), which both are bioderived molecules, into a smectite (purified bentonite) to concentrate o-phenylphenol and biphenyl, respectively, from water. The adsorption isotherm showed high affinity between the 4ATA-smectite hybrid and o-phenylphenol with a high Langmuir constant (0.98 L mg-1). Meanwhile, the E4ATA-smectite hybrid adsorbed biphenyl with a high Langmuir constant (3.61 L mg-1). The adsorption properties of 4ATA- and E4ATA-smectite hybrid were contributed by the chemical characteristics of 4ATA and E4ATA in the interlayer space of the smectite.

Macroscopic Helical Assembly of One-Dimensional Coordination Polymers: Helicity Inversion Triggered by Solvent Isomerism

Assembling macroscopic helices with controllable chirality and understanding their formation mechanism are highly desirable but challenging tasks for artificial systems, especially coordination polymers. Here, we utilize solvents as an effective tool to induce the formation of macroscopic helices of chiral coordination polymers (CPs) and manipulate their helical sense. We chose the Ni/R-,S-BrpempH2 system with a one-dimensional tubular structure, where R-,S-BrpempH2 stands for R-,S-(1-(4-bromophenyl)ethylaminomethylphosphonic acid). The morphology of the self-assemblies can be controlled by varying the cosolvent in water, resulting in the formation of twisted ribbons of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-2T) in pure H2O; needle-like crystals of R-,S-Ni(Brpemp)(H2O)2·1/3CH3CN (R-,S-1C) in 20 vol % CH3CN/H2O; nanofibers of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-3F) in 20-40 vol % methanol/H2O or ethanol/H2O; and superhelices of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-4H or 5H) in 40 vol % propanol/H2O. Interestingly, the helicity of the superhelix can be controlled by using a propanol isomer in water. For the Ni/R-BrpempH2 system, a left-handed superhelix of R-4H(M) was obtained in 40 vol % NPA/H2O, while a right-handed superhelix of R-5H(P) was isolated in 40 vol % IPA/H2O. These results were rationalized by theoretical calculations. Adsorption studies revealed the chiral recognition behavior of these compounds. This work may contribute to the development of chiral CPs with a macroscopic helical morphology and interesting functionalities.

Macroscopic handedness inversion of terbium coordination polymers achieved by doping homochiral ligand analogues

Inspired by natural biological systems, chiral or handedness inversion by altering external and internal conditions to influence intermolecular interactions is an attractive topic for regulating chiral self-assembled materials. For coordination polymers, the regulation of their helical handedness remains little reported compared to polymers and supramolecules. In this work, we choose the chiral ligands R-pempH2 (pempH2 = (1-phenylethylamino)methylphosphonic acid) and R-XpempH2 (X = F, Cl, Br) as the second ligand, which can introduce C-H⋯π and C-H⋯X interactions, doped into the reaction system of the Tb(R-cyampH)3·3H2O (cyampH2 = (1-cyclohexylethylamino)methylphosphonic acid) coordination polymer, which itself can form a right-handed superhelix by van der Waals forces, and a series of superhelices R-1H-x, R-2F-x, R-3Cl-x, and R-4Br-x with different doping ratios x were obtained, whose handedness is related to the second ligand and its doping ratio, indicating the decisive role of interchain interactions of different strengths in the helical handedness. This study could provide a new pathway for the design and self-assembly of chiral materials with controllable handedness and help the further understanding of the mechanism of self-assembly of coordination polymers forming macroscopic helical systems.

Self-Assembled Crystalline Bundles in Soluble Metal-Organic Nanotubes

The use of nanotubes in the solution state is crucial not only for the exploration of physical and chemical behaviors at the molecular level but also for application such as thin-film fabrication. Surface modification is generally used to solubilize carbon nanotubes (CNTs) and various synthetic nanotubes; however, this method may affect the surface properties of the original nanotubes, and the detailed crystal structure obtained after modification is unclear. Here, we report the synthesis of a crystalline and soluble metal-organic nanotube consisting of a cationic tubular framework and an anion with a long alkyl chain. The nanotubular structures are formed not only in the solid state but also in the solution state, as confirmed by an X-ray structural analysis, optical measurements, and electron microscopy studies. This nanotube system is realized in different states without any surface modification, which is quite different from typical CNTs and synthetic nanotubes. In addition, self-assembled crystalline bundles are directly observed using transmission electron microscopy (TEM) for the first time in a metal-organic nanotube system. The bundle structures are also confirmed by atomic force microscopy (AFM) observations of thin nanotube films. We envisage a systematic design of such soluble metal-organic nanotubes that will enable direct observation of mass transport behavior in channels of bundles or a single nanotube, as well as a wide range of thin-film applications.

Effect of Pd(II) uptake on high-temperature phase transitions in a hybrid organic-inorganic perovskite semiconductor

Hybrid organic-inorganic perovskites (HOIPs) have been widely studied for their interesting functions and potential applications. Here, we report a novel sulfur-containing hybrid organic-inorganic perovskite based on a one-dimensional ABX₃-type compound: [C₃H₇N₂S]PbI₃ ([C₃H₇N₂S]⁺ is 2-amino-2-thiazolinium) (1). Compound 1 undergoes two high-temperature phase transitions at 363 K and 401 K, respectively, showing a band gap of 2.33 eV, and has a narrower band gap compared to other one-dimensional materials. Moreover, by introducing thioether groups into the organic component, 1 has the ability to uptake Pd(II) ions. Compared with previously reported low-temperature isostructural phase transition sulfur-containing hybrids, the molecular motion of 1 becomes more intense under the stimulation of high temperature, leading to changes in the space group during the two phase transitions (Pbca → Pmcn → Cmcm), which are no longer the previous isostructural phase transitions. Significant changes in the phase transition behavior and semiconductor properties before and after metal absorption make it possible to monitor the absorption process of metal ions. The study of the effect of Pd(II) uptake on phase transitions may be helpful to reveal the mechanism of phase transitions more deeply. This work will broaden the hybrid organic-inorganic ABX₃-type semiconductor family and pave the way for the development of organic-inorganic hybrid-based multifunctional phase transition materials.

Halogen engineering of organic-inorganic hybrid perovskites displaying nonlinear optical, fluorescence properties and phase transition

In order to meet the needs of social development, increasing research attention has been paid to multifunctional molecular-based phase-transition materials. The traditional phase-transition materials with a single functional property can be transformed into magnificent ones by adding additional functional properties-for instance photoluminescence and magnetic order- because having two or more functional properties simultaneously greatly broadens the fields of their applications. At present, there are very few multifunctional phase-transition materials showing excellent performance, and the crystal structure design and performance optimization of materials still need to be studied in depth. Herein, we report the development of two organic-inorganic hybrid materials: (MBA)₂ZnI₄ (1, MBA = 4-methoxybenzylammonium) with switchable dielectricity and a high phase-transition temperature (T_c = 359.55 K), and (MBA)₂ZnBr₄ (2) with green luminescence (λ_exc = 314 nm) and nonlinear optical properties (0.75× KDP). A two-dimensional (2D) fingerprint analysis of the Hirshfeld surface plots revealed a significant difference between the hydrogen-bonding interaction before the phase transition and that afterwards. The two compounds were further verified, from energy band structure calculations, to be direct-band-gap semiconductors. In conclusion, this work has provided a viable strategy, involving the application of chemical modifications, for designing various functional materials.

Layered Uranyl Phosphonates Encapsulating Co(II)/Mn(II)/Zn(II) Ions: Exfoliation into Nanosheets and Its Impact on Magnetic and Luminescent Properties

Layered heterometallic 5f-3d uranyl phosphonates can exhibit unique luminescent and/or magnetic properties, but the fabrication and properties of their 2D counterparts have not been investigated. Herein we report three heterobimetallic uranyl phosphonates, namely, [(UO₂ )₃ M(2-pmbH)₄ (H₂ O)₄ ] ⋅ 2H₂ O [MU, M=Co(II), CoU; Mn(II), MnU; Zn(II), ZnU; 2-pmbH₃ =2-(phosphonomethyl)benzoic acid]. They are isostructural and display two-dimensional layered structures where the M(II) centers are encapsulated inside the windows generated by the diamagnetic uranyl phosphonate layer. Each M(II) has an octahedral geometry filled with four water molecules in the equatorial positions and two phosphonate oxygen atoms in the axial positions. The uranium atoms adopt UO₇ pentagonal bipyramidal and UO₆ square bipyramidal geometries. The lattice and coordination water molecules can be released by thermal treatment and reabsorbed in a reversible manner, accompanied with changes of magnetic dynamics. Interestingly, the bulk samples of MU can be exfoliated in acetone via freezing and thawing processes forming nanosheets with single-layer or two-layer thickness (MU-ns). Magnetic studies revealed that the CoU and MnU systems exhibited field-induced slow magnetization relaxation at low temperature. Compared with crystalline CoU, the magnetic relaxation of the CoU-ns aggregates is significantly accelerated. Moreover, photoluminescence measured at 77 K showed slight red-shift of the five characteristic uranyl emission bands for ZnU-ns in comparison with those of the crystalline ZnU. This work gives the first examples of 2D materials based on 5f-3d heterometallic uranyl phosphonates and illustrates the impact of dimension reduction on their magnetic/optical properties.

Thermally stimuli-responsive materials with transformable double channels of nonlinear optical and dielectric

Organic-inorganic hybrid materials have received extensive attention and in-depth research in the past few decades due to their superior properties and potential applications in storage, sensing, dielectric switches, actuators and...